G500S motherboard is not working

the motherboard has gone on my daughters laptop and im looking to have it replaced. i can do it myself but i cannot find the part on any site other than US ones and the lenovo site itself is next to usless.
does anyone have any ideas where i can buy the motherboard please. im not keen on ordering international but may have to.
thanks in advance...

Hi Taffdragon,
Welcome to Lenovo Community!
As per the query we understood that you are looking for the replacement of the motherboard in your Lenovo G500s laptop.
The below is the motherboard part number, please select accordingly.
VILG1 MB DIS HM76 GE 2G (G500s) 90003073
VILG1 MB DIS HM76 GE 1G (G500s) 90003074
VILG1 MB DIS HM70 GE 2G (G500s) 90003075
VILG1 MB DIS HM70 GE 1G (G500s) 90003076
VILG1 MB DIS HM76 GV2 2G (G500s) 90003078
VILG1 MB UMA HM70 (G500s)                       90003079
VILG1 MB UMA HM76 (G500s) 90003080
VILG1 MB W8P DIS HM76 GE 2G (G500s) 90003082
VILG1 MB W8P DIS HM76 GE 1G (G500s) 90003083
VILG1 MB W8P DIS HM70 GE 2G (G500s)    90003084
VILG1 MB W8P DIS HM70 GE 1G (G500s)    90003085
VILG1 MB W8P DIS HM76 GV2 2G (G500s)   90003087
VILG1 MB W8P UMA HM70 (G500s)               90003088
VILG1 MB W8P UMA HM76 (G500s)               90003089
VILG1 MB W8S DIS HM76 GE 2G (G500s)      90003 091
VILG1 MB W8S DIS HM76 GE 1G (G500s)      90003092
VILG1 MB W8S DIS HM70 GE 2G (G500s)     90003093
VILG1 MB W8S DIS HM70 GE 1G (G500s)      90003094
VILG1 MB W8S DIS HM76 GV2 2G (G500s)    90003096
VILG1 MB W8S UMA HM70 (G500s)                90003097
VILG1 MB W8S UMA HM76 (G500s)               90003098.
Please purchase the part in the authorised service centre for the genuine part, please select t the appropriate part and replace the part.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Motherboard is not working, how to order a new one?

On my laptop (hp pavilion dv6-2112er), faulty input from the inverter and for this reason it is not working backlight, how can I order a motherboard?

Hello AlexeyBen,
I am not sure of what you are asking in the entire post, but I do have your part number for the Motherboard for your HP Pavilion dv6-2112er. The Part number is 518433-001.
If you require additional assistance with this or any other issue please re-post. Thank you for bringing this issue to the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

New motherboard will not work

I had a MSI 6507 motherboard go bad..
I purchased a new msi p4mam motherboard, installed it and the computer will not post.
Is there something maybe we forgot to do???
Follow all the instructions
Any help would be appreciated. This is the kids computer and they are really wanting to get back to their games .

The 4-pin is connected
I have reseated the processor
I have tried one stick of , even tried new ram
cleared Cmos
Even tried a differnet procesor that we knew worked out of a different machine.
I had Windows XP
When I start the computer the green light on the box comes on, the fans spin teh light for the CD flashes but nothing els. NO beep, no display.. could I have connected something wrong? I am at a loss.....

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

T40 sound not working after motherboard replaced....bad sound card?

Hello,
I recently brought back to life my old t40 2373-75U by switching out the motherboard (it would no longer charge batteries) with a used R51 1830 motherboard (which I believe was a recommended upgrade by someone on this site).
Anyways, long story short - I have the gently used motherboard now installed and the machine is up and running with my old T40 hard drive. I also have XP-SP3 installed on it, and just had to make a few minor driver updates...everything seems to be working great, EXCEPT I have no sound.
I have tried everything I can think of:
Software:
-un-installing and re-installing the audio driver several times
-installing the 2004 version of the hotkey driver (the 2013 version did not work with my system) because the Access IBM and volume buttons were not working and I thought that might be the culprit
-I believe I updated the BIOS drivers, but not sure if I "flashed" it...admittedly, I don't even know how to do that.
Hardware:
-the hardware in device manager shows that it's working properly
-I've performed the "test hardware" function through the control panel/device manager and it shows a signal with my USB "test" microphone going in and a signal coming out, but still no sound is actually coming out
-lastly, I've tried connecting external speakers to the headphones jack and still nothing..
At this point, all I can think is that the sound card is bad.
Would you agree with this assessment or am I forgetting something?
Thanks for your help.
Solved!
Go to Solution.

I'm not familiar with Linux Mint as I have been a Fedora guy for a long time, but since LM7 was
released in 2009, all audio drivers should be present for your machine. But, as I said, that could
be different for LM.
But you shouldn't have to do anything further regarding codecs or anything else, and since the Soundmax
uninstallation also removed the device as well, then it should be completely reset in the OS. Alas, is there
anything from Via in Control Panel - Add/Remove programs? If so, you should remove that before proceeding.
The driver for your machine is here:
Audio driver for Windows XP
And if you already installed this version, the driver can be found @ C:\DRIVERS\WIN\AUDIO
I did some rummaging through various forums today in regards to your issue, and found this one,
a couple of R51 users chime in there too.
http://forums.windrivers.com/printthread.php?t=73987&pp=40
and in the above link, a user found a solution by following the advise in this post:
http://www.techspot.com/community/topics/audio-drivers-not-found.14328/#post-184512
But instead of getting the drivers mentioned there, you could point to the installation location I
posted above.
One thing they mention in these threads, is running
sfc /scannow
in a command prompt, which checks your OS for essential system files, but for XP you'll
almost certainly need the Windows XP installation media.
Finally, here is another thread on audio issues for a R51 user:
http://www.techsupportforum.com/forums/f19/solved-ibm-r51-no-sound-512806.html
Sorry for a bit muddled reply, but there you go... something to sink your teeth in at least.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Lenovo G500 touchpad not working

I bought a lenovo G500 laptop around 6 months ago.So far everything was good enough but suddenly my touchpad has stopped working.I looked up in the manual and used the function key (F6) to enable/disable it but this is also not working.If I plug in the usb mouse then it works fine.Di I need to reinstall touchpad drivers? Help pls...

hi Prathibha,
Welcome to the Lenovo forums!
YES,
I would consider as my first step on throubleshooting this.
Open Device Manager and under Mice and Gaming controllers, Rightclick and Uninstall the Synaptics or ELan touchpad,
Restart the system and Install the driver back,
Windows 7
Touchpad Driver (Synaptics, Elan)
Windows 8
Touchpad Driver (Synaptics, Elan) for 64-bit Windows
Windows 8.1
Touchpad Driver (Synaptics, Elan)
Let me know your findings
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Replaced T61 motherboard, LCD still does not work!

The LCD on my Thinkpad T61 recently died. I started by ordering a new inverter, since that was a possible cheap fix for the problem. When the first replacement inverter did not work, I tried another one, and the LCD still did not work. Because the laptop outputted fine to an external monitor, I was led to believe (from reading many forum posts online) that the issue may either be with my Nvidia 140M graphics card or with a fuse on the motherboard delivering power to the internal LCD. When I held a flashlight to the LCD, I could not see anything at all (not even a faint display, as would be the case with a bad backlight).
In an attempt to rectify both of those problems, I ordered a brand new system board. The replacement motherboard had Intel graphics instead of NVidia graphics. After I swapped everything in and turned on the computer, the LCD screen briefly worked, but none of the status LEDs on the inverter board worked (except for the Wi-Fi light on the far left). After I turned off the computer and turned it back on, the internal LCD stopped working again.
If I hold up a flashlight to the LCD, I can see a faint image when I boot up. However, once the computer boots into Windows, this faint image disappears even if I shine a bright light at the LCD. This leads me to believe that something may be wrong with the backlight. [u]However, would a bad backlight alone also cause most of the lights on the inverter board to not work? Currently, only the LED for Wi-Fi on the far left works. I'm skeptical that the problem is with the inverter board, since I've tried THREE different inverters (the original one that came with my computer and 2 replacements I bought on eBay). I've inspected the LVDS cable and it does not seem to be damaged. I've also double and triple-checked all of the LCD connections to ensure that they are firmly in place.
What else could be possibly causing the problem here? I was very much encouraged when the LCD worked for a few minutes after I swapped the motherboard, but after that it never worked at full brightness again.

I think you've gone way overboard fixing this thing. A simple display swap from a working unit would have told you which direction to go to look for the cause, and I'd hate to think what you spent on a new system board... and with so much cheap used parts available, you probably could have done this alot cheaper, and faster.
If you were local I'd offer to help you diagnose this, but if you have one of the common screens and you deside you want to replace it, I may have one, or be able to find you one.
Either way, good luck and I hope you get this thing fixed after all you've put into it.
Good luck
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Card Reader not working in Lenovo G500s (Code 43)

Card Reader is not working suddenly. It is saying Port Reset Failed (Code 43).
I updated the card reader drive, the cipset driver and the bios, the problem stays same. Also tried other solutions from the net, nothing helped. I also did a hard reset 1 month ago.
So is this a hardware problem for sure or should I try something else?

Hi,
Did you make any changes to you PC prior to the time that the media reader quite working?
If you haven't made any changes and the media card tht you are using is known to be good and compatible with your PC then try this suggestion.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Front USB Ports not working on Z97-G45 motherboard

Hey there, after upgrading from Win 7 pro x64 to win 10 x64, I found my front usb 3 ports are not working. I figured it was drivers so I installed the chipset drivers off the MSI website, with no luck. I keep getting Unknown USB Device (Device Descript...

Quote from: Capt.Alberto on Today at 01:21:08hmmm.
i wonder , was it at this temperature since the beginning ?
there's a good chance that you need to ship it back .
your temperature is far from what it should b...

G500s Touch keyboard and mouse pad not working

I've uninstalled and reinstalled the drivers. The solution center says everything is fine. USB mouse works, as does the touch screen, just not the actual keyboard or pad.
Please help.

For additional information - i now have my keyboard working, but the touch pad is still not working. I went to the lenovo site and downloaded the elan driver again. it extracted, but once i clicked for it to install, it says No Appropriate Driver to be installed.

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

K7T Turbo limited - USB not working

I have a K7T turbo limited edition motherboard. The rear usb ports work fine. There are two USB ports on the front which do not work. appreciate any ideas on how to clear up this problem.

https://forum-en.msi.com/index.php?threadid=52338&sid=
one to many wire is usual problem

Keyboard trackpad not working

All of a sudden my keyboard and trackpad don't work on my Macbook. USB keyboards and mice work fine. I took off the keyboard and tried it on another Macbook and it worked fine. Don't know if any recent updates or firmware changes have been done. Any ideas of how to fix or is this a motherboard issue?

Hi today we were having a yard sale. A family member needed to use a computer and used mine. When i got it back from they left in a hurry.
Well I opened it clicked a few things with my "wireless mightymouse" and went to type keyboard did not work so i tried the track pad. So i found this post looking on the web. looked other placess. thought i would shut it down as soon as it went off it immediately turned back on. so i tried again. no luck so i took out the batery unpluged it. Then it would not turn on. Apple is sending a box by monday. I told them i think it is a logicboard="motherboard" problem.
But till then im going to a computer store to obtian my data off my MacBook

Added USB Card does not work.

I just added a 5 Port (4 external and 1 internal) USB PCIe Card to my mac pro. The MAC see the card but anything I plug in does not work. The items I plug in work on the other Apple USB Busses but not on the new card. This is actually my second card for this (I thought the first one was bad) but now I am beginning to think the MAC PRO is bad. I have plugged the card into every slot on the motherboard and they all are the same. card is recognized but anything I plug into the card is not...
Does anyone have any suggestions?

Hi Bruce Leingang;
Everything I found on the web about that card say that it only works on Windows PC.
Allan

Control key (^) combined shortcuts does not work on mac book pro

All shortcut combinations with the control key (^) do not work. I´m using Mac Book Pro 13 (late 2013) with Os X Mavericks 10.9.4

The Logic Board is the Main system board. In the Windows world better known as the Motherboard. Except with Apple Mac computers the CPU and the GPU are Soldered to the logic board and if it is a Retina screen model the RAM is also Soldered to it.
So replacing the Logic board is like replacing the compete system and costs accordingly.
But there isn't much else you can do if you can't get that switch unstuck. Or just go without sound from the built in speakers. They aren't that good anyway.

G500S motherboard is not working

Similar Messages

Maybe you are looking for