G500s OKR not working

Hello everyone.. I just bought a Lenovo G500s laptop. It came with a C drive of 890 GB and also with a D (Lenovo) drive of 25 GB. As you can see, I had to resize the C drive partition which i did but to my surprise, i lost the OKR functioning. Now i have OEM partition with a capacity of 13.21 GB ( It shows free space of 13.21 GB also). Did i accidentally delete it?? is it empty now?? How do i use it again ( Sorry for my not so good english)
I have a few question, please help me because i am just a noob
1. Can i again get OKR work again??
2. Can i use windows recover tool to use that free OEM partition?? ( i tried to but windows recovery doesnt show my OEM partition).
3. Is it necessary to make a recovery dvd or USB flash drive ( or OKR )?? Can i not recover my system just by using windows sytem restore?? ( Would i be needing any of the above things)??

Hi Agalloch90,
Welcome to Lenovo Community Forums!
I’m sorry to hear about your situation, if the OKR (One Key Recovery) software is not detecting the partition, it may have got deleted while the time of resizing the C: drive. Hence I suggest you to re-install the OKR software and check the issue, below is the link to download the OKR Software:
Lenovo OneKey Recovery for Windows 8 (64-bit)
NOTE: It is recommended to create a set of Recovery Discs at the time of purchase.
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Lenovo G500 touchpad not working

I bought a lenovo G500 laptop around 6 months ago.So far everything was good enough but suddenly my touchpad has stopped working.I looked up in the manual and used the function key (F6) to enable/disable it but this is also not working.If I plug in the usb mouse then it works fine.Di I need to reinstall touchpad drivers? Help pls...

hi Prathibha,
Welcome to the Lenovo forums!
YES,
I would consider as my first step on throubleshooting this.
Open Device Manager and under Mice and Gaming controllers, Rightclick and Uninstall the Synaptics or ELan touchpad,
Restart the system and Install the driver back,
Windows 7
Touchpad Driver (Synaptics, Elan)
Windows 8
Touchpad Driver (Synaptics, Elan) for 64-bit Windows
Windows 8.1
Touchpad Driver (Synaptics, Elan)
Let me know your findings
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

After Kernel Update (2.6.38.3-1) mouse is not working anymore

I updated the kernel to version 2.6.38.3-1 via pacman. Since then my usb mouse (Logitech G500) is not working anymore.
lsusb recognizes the mouse as connected, but it does not show up on "xinput list".
How can I track down the problem to its source?

Hello,
Probably related to udev 167.
See this post and my bug report : https://bbs.archlinux.org/viewtopic.php?id=117274
Regards.

Card Reader not working in Lenovo G500s (Code 43)

Card Reader is not working suddenly. It is saying Port Reset Failed (Code 43).
I updated the card reader drive, the cipset driver and the bios, the problem stays same. Also tried other solutions from the net, nothing helped. I also did a hard reset 1 month ago.
So is this a hardware problem for sure or should I try something else?

Hi,
Did you make any changes to you PC prior to the time that the media reader quite working?
If you haven't made any changes and the media card tht you are using is known to be good and compatible with your PC then try this suggestion.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

G500s Touch keyboard and mouse pad not working

I've uninstalled and reinstalled the drivers. The solution center says everything is fine. USB mouse works, as does the touch screen, just not the actual keyboard or pad.
Please help.

For additional information - i now have my keyboard working, but the touch pad is still not working. I went to the lenovo site and downloaded the elan driver again. it extracted, but once i clicked for it to install, it says No Appropriate Driver to be installed.

Brightness key not working with Dell monitor

Should my new wireless keyboard brightness keys be working with my Dell monitor?

Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on: 2nd generation Intel(R) Core(TM) i3 processor 2nd generation Intel(R) Core(TM) i5 processor 2nd generation Intel(R) Core(TM) i5 vPro(TM) processor 2nd generation Intel(R) Core(TM) i7 processor 2nd generation Intel(R) Core(TM) i7 vPro(TM) processor Intel(R) Pentium(R) Processor 900/B900/G600/G800 Series Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

SSD Upgrade V570 - OneKey not working.

So, From what I read, it is not possible to use OKR once you replace the drive.
What I have tried:
1: Cloned original HDD to SSD
2: Installed SSD. Computer surprisingly booted up with out problems
3: OneKey press at power off = normal start up
4. OneKey from Start menu will backup, but wont reimage.
5. tried to partition drive exactly as HDD was (except C: which is smaller)
6. changed type from 12 to 7 in ptedit32, set boot flag active
7. booted into recovery, but would not recover, "cannot find service partition"
8. cahnged Lenovno_part back to type 12
9. one key works both button and start menu, but still no recovery
10. called customer service, cost money for discs...
So I guess my specific question are, will the recovery discs from lenovo be exactly like the ones i could have burnt from the orgianl HDD? meaning, is it not going to work becuase the drive is different size, or does it automtically build partions based off the size of the ssd? If I put the old HDD (which is untouched beyond the first power on) and make factory discs, will they build partition scheme on new SSD and one key will work?
I should have mentioned that my system was as such:
200MB hidden OEM partition
475GB C: partition
29GB D: LENOVO partition
20GB hidden LENOVO_PART partition
this was purchases last week (09/01/2012)as a refurbish, and was the best setup (no bloat (except lenvon stuff)) 'ive ever purchased.
I understand everyone who wants to mess with partions and such, but they should have a way to rebuild partition structre if you have to replace the drive. On my wives older v570, the drive went bad, bought a new 500gb and onekey would not work becuase the new "500"gb drive had 13MB (yes, thats MB's) less space....???

Hi
Welcome To Lenovo Community
If you have the Old hard drive, I would suggested to create a set of recovery DVD’s, Burn the factory image
Then Install SSD and use recovery DVD’s.
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-and-Z-series/Accidentally-Deleted-One-Key-Recover-Software...
http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/How-to-Create-Factory-Disc-with-One-Key-Recove...
Please let us know if you have any further question.
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Brightness key not working after upgrading to win 10

MY laptop has been upgraded to win 10, but after the update brightness key is not working.

Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on: 2nd generation Intel(R) Core(TM) i3 processor 2nd generation Intel(R) Core(TM) i5 processor 2nd generation Intel(R) Core(TM) i5 vPro(TM) processor 2nd generation Intel(R) Core(TM) i7 processor 2nd generation Intel(R) Core(TM) i7 vPro(TM) processor Intel(R) Pentium(R) Processor 900/B900/G600/G800 Series Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

Not work tablet UI on Prestigio 5080 PRO tablet

I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team

Why self-defined access sequences of free goods can not work?

Hi gurus,
I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
when i used the standard access sequences ,it is OK .
Can anybody tell me why?
thanks in advance

Dear Sandy,
Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
Make sure that these fields are flowing in your sales order.
I hope this will help you,
Regards,
Murali.

Adobe bridge raw not working with windows vista in photoshop cc, why?

adobe bridge raw not working in photoshop cc, is there a fix?

Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

Adobe Bridge CS5 in windows 7 not working?

Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.

https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Partner application logoff not working

We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
response.sendError(470, "Oracle SSO");
session.invalidate();
but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
Are there any additional configurations for SSO logoff.Any help is appreciated.
Thanks

Hi
The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
So this means that Partner change is active.
the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
Thanks
Tarmeem

IPhone 4 Voice Memos not working/saving

Hi there,
I'm having trouble with my voice memos too. Up until yesterday they were working fine and now, even though the record button works, the stop button does not and I can only pause them. Worse again is that the button to go into the menu to view all voice memos is not working so I can't play them from my iPhone and nothing new is saving to my iTunes. Please help!

I've always had the "Include Voice Memos" option selected. I think that only pertains to syncing voice memos from iTunes to the iPhone after it has been copied to iTunes. It has to be the new OS/iTunes not communicating that new memos have been recorded. For some reason they won't sync when I want them to, and then a few syncs later they magically appear.
By the way, I'm VERY comfortable with the iTunes and iPhone systems. I've been using iTunes for 5 years, and I've been recording class lectures with the iPhone voice memo app (and another app) for a couple years. It's not an error of not seeing that the memos were added; they don't exist in my library or music folders.
JUST OUT OF CURIOSITY, POST WHICH FIRMWARE YOU ARE RUNNING EXACTLY!!!
I'm on an iPhone 4, running firmware 4.0.1

G500s OKR not working

Similar Messages

Maybe you are looking for