G505s - Touchpad hot key function not working with lenovo driver

I'm using windows 8.1, Lenovo G505s laptop. Recently I got replacement from Lenovo regarding touchpad after that this Fn(F7) touchpad enable/disable not working. This is happening only when I installied touchpad driver provided by lenovo and works well with standard microsoft driver (Ofcourse, no multigesture support with that driver).
We perfomed following operations:
1. HotKey mode enable/disable in BIOS
2.Reinstallation of OS
3. Reinstallation of driver(manually)
All cases with microsoft driver this function working but with touchpad driver it is not working. It's almost 90days (88thday) daily contacting both Lenovo customer support and service center people but no use.
If anybody having this problem and have a solution please share! (My machine under warranty!)

hi phani_kumar,
It's likely that you have a Synaptics driver (you can verify this by its hardware ID or use a utility software like AIDA 64 Extreme Edition).
- Link to picture (Synaptics)
- Link to picture (ELAN
If you're unable to install the driver below, can you follow this guide on how to disable driver signature enforcement then try to reinstall the driver again and observe if you can now toggle the Fn+F6.
Windows 8/7/XP/Vista 64/32-bit Edition v17.0.19
All Languages
118.1 MB zip
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Modifer keys do not work with mouse in Illustrator

Below is a copy of a bug report I just submitted to Adobe. I don't suppose any users have run across this and found a solution or workaround?
I found someone else with this problem in an archived topic thread, but the only response that poor fellow got was an accusation of not following instructions (His problem wasn't user error, BTW).
Thanks
******BUG******
Concise problem statement:
Modifer keys do not work with mouse: For example, free transform or rotate behaviors that require "Click-Ctrl" .
Steps to reproduce bug:
1. select object
2. select free transform tool
3. left click (without releasing) a corner of the bounding box.
4. start dragging
5. press ctrl
Results:
object behaves as though the ctrl key was not pressed. i.e. the cursor does not change shape and the object scales rather than distorts.
Expected results: The cursor should change shape as the ctrl key is pressed and the object should distort rather than scale.
Additional information: This behavior is intermittent. Occasionally Illustrator recognizes the "Click-Ctrl" combination and behaves exactly as the help file predicts it will. The cursor changes shape and the object distorts rather than scales. I can offer no rhyme or reason for when Illustrator will behave as advertised and when it will ignore the modifier keys.
The example above involves the free transform tool, but the problem occurs just as often with other tool behaviors that require a modifier key + mouse combination.
Primarily using Wacom Intuos3 tablet. (with latest drivers), but have also tried combinations with microsoft mouse or both mice installed.
Also, immediately after an occurrence Illustrator bug, left AI open, went to a different app that uses mouse+modifier (Ctrl+Click). That different app recognizes Ctrl+Click with no problems whatsoever.

Thanks Guys,
Good to know it's working for you. I guess that's the nature of intermittent bugs. Of course, Adobe's bug report form has a field for version, which I, of course, filled in. Sorry I didn't add it to this post. I'm using the latest version CS3 v13.0.2.
Stephen,
Sorry I was not more clear when I said, "For example, ...". I was talking about the modifier keys not working with several different tools. The Free Transform tool advertises functionality that is supposed to work with a "Click (down, but don't release)then hold down Ctrl" combination. The Rotate tool advertises a behavior that is supposed to work with an "Alt-Click" combination. These are just 2 examples of the modifier keys not working. I focused primarily on one example in the bug report(ctrl after and in addition to click in the free transform tool, not alt-click in the rotate tool).
Here is what I expect(quoted from Adobe's CS3 help file)
(From the "Distort Objects with the Free transform tool" help topic)
"Select one or more objects.
Select the Free Transform tool .
Start dragging a corner handle on the bounding box (not a side handle), and then do one of the following:
Hold down Ctrl (Windows) or Command (Mac OS) until the selection is at the desired level of distortion.
Hold down Shift+Alt+Ctrl (Windows) or Shift+Option+Command (Mac OS) to distort in perspective."
(from the "Rotate an object by a specific angle" help topic:)
You can control the exact angle of rotation with the Rotate command.
Select one or more objects.
"Do one of the following:
To rotate around the center point, choose Object > Transform > Rotate, or double-click the Rotate tool.
To rotate around a different reference point, select the Rotate tool. Then Alt‑click (Windows) or Option‑click (Mac OS) where you want the reference point to be in the document window.
Enter the rotation angle in the Angle text box...."
These Tool based mouse-key combinations do occasionally work as they are supposed to, so I know what the expected results are supposed to look like, but whether they work or not appears to depend on the phase of the moon, the day of the week, and the color of the president's underwear.
Other non-tool based mouse-key combinations in Illustrator work consistently all the time - Ctrl-A for Select All as just one example that always works.
Thanks Again

Product key will not work with this edition of Windows 7

I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Intel 6205 wireless not working with Lenovo W520

Loving the new W520... very fast, if only the wireless would work. Unable to get wireless interface functioning, won't even show up in ifconfig. I've appended requested wireless information, thanks in advance for any assistance.
1) Machine Brand and Model (PC/Laptop):
Lenovo W520
Intel Centrino Advanced-N 6205
Note: Wireless switch on lefthand side enabled, bluetooth led lights up but wireless does not.
2) Wireless Brand, Model and Wireless Chipset:
$ lspci -nn
03:00.0 Network controller [0280]: Intel Corporation 6000 Series Gen2 [8086:0085] (rev 34)
3 ) check interface:
ifconfig does not show wireless
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
4 ) Check for modules:
$ lsmod
iwlagn 215351 0
iwlcore 139688 1 iwlagn
mac80211 269644 2 iwlagn,iwlcore
cfg80211 167809 3 iwlagn,iwlcore,mac80211
5) Kernel boot messages
$ dmesg
[ 13.497936] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 13.497938] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 13.498058] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.498089] iwlagn 0000:03:00.0: setting latency timer to 64
[ 13.498181] iwlagn 0000:03:00.0: Detected 6000 Series 2x2 AGN Gen2a, REV=0xB0
[ 13.499187] lp: driver loaded but no devices found
[ 13.502642] alloc irq_desc for 22 on node -1
[ 13.502645] alloc kstat_irqs on node -1
6 ) Network configuration
$ sudo lshw -C network
*-network UNCLAIMED
description: Network controller
product: 6000 Series Gen2
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: 34
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: memory:d5300000-d5301fff
7 ) Scan for networks:
not relevant as no wireless interface appears
8 ) Ubuntu Version:
Ubuntu 10.10
9 ) Kernel/architecture (including 32 vs. 64 bit):
2.6.35-28-generic x86_64
10 ) Restarting the network:
sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
[ OK ]
Additionally, modinfo shows the following:
$ modinfo iwlagn
filename: /lib/modules/2.6.35-28-generic/updates/compat-wireless-2.6.36/iwlagn.ko
alias: iwl4965
license: GPL
author: Copyright(c) 2003-2010 Intel Corporation <[email protected]>
version: in-tree:
description: Intel(R) Wireless WiFi Link AGN driver for Linux
firmware: iwlwifi-4965-2.ucode
firmware: iwlwifi-5150-2.ucode
firmware: iwlwifi-5000-2.ucode
firmware: iwlwifi-6000g2b-4.ucode
firmware: iwlwifi-6000g2a-4.ucode
firmware: iwlwifi-6050-4.ucode
firmware: iwlwifi-6000-4.ucode
firmware: iwlwifi-1000-3.ucode
srcversion: 8F7F4C6196599FCA596C837

Hi sparhk, and welcome.
One of the Lenovo staff who frequents the forum put out a call to help you in a private forum. I do a little Linux, so I poked into it. To my amazement my first Google hit was your thread where you indicate you have solved the problem. (At least, it _looks_ like you...)
May I respectfully suggest that a post back here indicating success would be a nice touch? That way anyone who passes by looking for help with this issue will have a better chance of finding it. For posterity, here it is (see post number 25):
[SOLVED] Intel 6205 wireless not working with Lenovo W520
Glad you got it working,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Evaluate_Analytic function not working with VPD enabled

Experts,
One of the column formula has evaluate_analytic function in the report. The report works fine with no errors when Virtual Private Database is not checked in the Physical Layer's datasource object, but the same report fails with the below error message when VPD is checked.
Please share your thoughts on how to resolve the error. Your response is greatly appreciated.
This is the error message in the answers:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 42015] Cannot function ship the following expression: Evaluate_Analytic( MIN(%1) OVER(PARTITION BY %2),([ D901.c3, D901.c4] )).Please have your System Administrator look at the log for more details on this error. (HY000)
This is in OBIEE 11.1.1.6 version. I haven't tested in old versions.
Regards,
Tom
Edited by: Tom Lype on Oct 1, 2012 2:17 PM

I found the solution myself. Hopefully it should help others.
If your fact table is within a data source object which has VPD enabled in the physical layer, all other tables(dimensions) mapped to it should be from a data source object which has VPD checked. I might be wrong but at least in my case after I copied over two tables from a data source (no VPD checked) into the new data source (VPD checked), my evaluate_analytic function is working with no errors. The parameters for the evaluate_analytic function are from those two tables.
Regards,
Tom

Hp t510 right alt key mapping not working with ctrl + s

Using the HP t510 to launch a xendesktop session via storefront. We have a mission critical application that uses the ctrl + alt + s hotkey to secure itself. The left alt key with ctrl + s is working as it should but the right alt key does not. When testing in the win7 on screen keyboard the right alt and ctrl stay lit up. When hitting the S key after depressing both the right alt + ctrl (right or left ctrl doesn't matter) the alt keys disappear from the on screen keyboard as if they were no longer pushed. They hotkey combination never makes it to the application and it does not secure itself.
I've tested this same workflow on an ASUS thin client, desktop, and laptop hardware with no issues. It does in fact seem to be some hotkey mapping the HP device has baked into it using the right alt key.
Has anyone seen any issues that even closely mimic this? I've seen some for ctrl + alt + del but their fixes don't work for this specific issue.

Hello xXenStatex,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the alt key mapping is not working with ctrl + s on your Thin Client, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Workstations-Thin-Clients/bd-p/bsc-635
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

F2 key does not work with excel

Dear Friends,
when i am working with excel, f2 key does not work as its shortcut. can you please help me how i can solve this. thanks a lot

what if you press Fn + F2? Does anything pop up?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

The zoom function is not working with lenovo A700 computer

I have a lenovo A700 desktop computer with a touch screen interface. I recently downloaded the newest version of Firefox (4.0.1) and now the touch screen zoom in/out function with webpages is not working. This function is working with IE8 on the same computer so there seems to be something wrong with Firefox. It was working with the previous version of Firefox as well. Please help, thanks.

jotan832,
Have you tried restoring the iPhone and setting it up as a new phone? Sometimes these issues can be software based. More information on the restore process can be found here: http://support.apple.com/kb/HT1414
To set up appointments for the Apple Store online, visit http://www.apple.com/retail/ to locate your store website, then choose the Concierge.
Hope this helps,
Raleigh

Enter key does not work with MSTSC

I have SQL Develoepr 1.0.0.15.57 installed on a Windows Server 2003 (Ver. 5.2 SP 1). I use Microsoft Terminal Services Client (mstsc.exe) to get to that server from a Windows XP Professional (ver. 5.1 SP 1) box.
When I use mstsc to get to the server and launch SQL Develoeper, it works...mostly. But the <enter> key does nothing. I've tried changing the line terminator (tools/preferences/line terminator) from "Platfor Dependant" to "Windows CR/LF" but that has no effect.
The encoding is set to cp1252 which is the same as my local version on the XP Pro box (both 1.0.0.15 and the new beta 1.1.0.21) which work fine.
Any ideas why the enter key would not work when using mstsc from an XP box to a Windows Server 2003 box?
Thanks,
Shelby

Look in Tools| Preferences | Accelerators and see if you have a key defined for 'insert new line'.
If you haven't, try restoring the default accelerators

Some Keys are not working on Lenovo G570

Hello all
I am new here, looking for some help regarding my Lenovo G570.
Yesterday, it was working perfectly, I properly shut is down. I have set a BIOS pasword.
Today, when I switch it on, I was unable to type the pasword becasu some keys were not working. However, I managed to loged in with the help of On Screen Keyboard. After analysing it, I came to know that some keys on numpad includeing 0,2 and on the 2nd line(vertical numerical keys) 1,2,3,4,7,8,9,0 are not working. I tried to re-install the OS but I set a BIOS paswoed containing one of the missing keys.
Please let me know whether it is a software problem or should i take my laptop to some repairing shop?
Thanks
Solved!
Go to Solution.

Hi Asadkhan92,
Welcome to Lenovo Community!
As per the query we understood that you are facing an issue with the keyboard in your Lenovo G570 laptop.
As you have mentioned that the some keys are not working in your laptop, as you have also mentioned that the onscreen keyboard is working, please connect the external keyboard and check for the issue, this is to confirm if the issue with the hardware or software.
If the external keyboard works fine and if the keypad is not working then it’s a issue with the keypad of the laptop.
Please visit the nearest service centre for further details.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Hope this helps!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

JSP Not Working with Thin Driver

My JSP is not working with Oracle thin driver but it is working with Oracle OCI driver.
From my jsp i am calling a stored procedured and passing 170 parameters to the procedure. This JSP works with Oracle OCI Driver configured as thrid party drivers in iAS6.0 SP2, but not working with Oracle Thin Driver configured as third party drivers in iAS6.0. My thin driver JDBC Connection URL is as follows:
jdbc:oracle:thin:@(DESCRIPTION =(ADDRESS_LIST =(ADDRESS = (PROTOCOL = TCP)(HOST = MAPDBI01)(PORT = 1521)))(CONNECT_DATA =(SID = MAPS))).
I have to give this URL because my production server deployment consists of iWS4.1 SP5 and iAS6.0 SP2 in different solaris boxes and Oracle 8.1.7 Database server in another Solaris Box. There is a pool of proxy servers between iAS6.0 box and the oracle box.

Wim,
I'd really appreciate it if you could provide some sample code. A complete, small, simple java class that I could copy and try out would be wonderful -- if it's not too much trouble.
Thanks heaps (in advance :-),
Avi.

Line-in not working with new driv

Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

X3000 wireless mouse not working with lenovo T440 - windows 7

New mouse of HP x3000 model is not connects with lenovo T440 model which has windows 7 Enterprice edition. What could be the problem. I followed recommented steps.

Hello @Ilakkuvan,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your wireless mouse will not work on your Lenovo computer. I would be happy to assist you in this matter!
Does the wireless mouse work when connected to another computer? Do other USB devices work on your computer? In the meantime, I recommend following the steps in this document on Troubleshooting USB Connections (Windows 7). This should help connect your mouse to the computer.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HD Led not working with SATA drives on MSI K7N2 Delta

I noticed the HD led does not work with the SATA drives on my MSI K7N2 Delta ISLR
I confirmed that the led is not burnt out by reconnecting a spare IDE HD with XP on it to IDE 1 and the led worked when there was activity, but it does not work when connected to IDE3 or if the SATA drives are connected to Serial 1 & 2.
Could it be because the motherboard doesn't support and hdd led for the Promise SATA controller.
I had Bios v7.3 and flashed to v7.4 with no luck.
Could a new bios update fix this problem?
Anybody seen this before?

basically it not wired up so works for no one

G505s - Touchpad hot key function not working with lenovo driver

Similar Messages

Maybe you are looking for