G510 and r5 m230 drivers problem.

Hello
i have lenovo g510. i bought it with no OS and i instaled win7, after instaling all drivers for win7 expect 5.2 intel video driver because its says:
this computer does not meet the minimum requirements for installing the software
from lenovos site, i can see in device manager that r5 m230 is not working properly:
Windows has stopped this device because it has reported problems. (Code 43)
and standard VGA graphics adapter is working fine, how to make r5 m230 work fine too ?
i have i3-4100m
PCI\VEN_8086&DEV_0416&SUBSYS_380B17AA&REV_06
PCI\VEN_1002&DEV_6665&SUBSYS_380B17AA&REV_00
also i can find drivers for
PCI\VEN_8086&DEV_8C31&SUBSYS_397817AA&REV_05
USB\VID_0BDA&PID_0129&REV_3960
P.S
is there driver package which contains all drivers for win7 like i have one for win8.1 ?

mikesz555 wrote:
PCI\VEN_8086&DEV_0416&SUBSYS_380B17AA&REV_06
PCI\VEN_1002&DEV_6665&SUBSYS_380B17AA&REV_00
also i can find drivers for
PCI\VEN_8086&DEV_8C31&SUBSYS_397817AA&REV_05
USB\VID_0BDA&PID_0129&REV_3960
P.S
is there driver package which contains all drivers for win7 like i have one for win8.1 ?
Good day and welcome to the community.
In case you don't have it, for reference here is your model's support site:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g510-no...
Using http://www.pcidatabase.com I see a couple possibilities for you.
VEN_8086&DEV_0416 looks like Intel HD Graphics. There's a Win7 driver at the link above.
VEN_1002&DEV_6665 isn't so clear. The vendor is AMD, but the device comes up empty.
VEN_8086&DEV_8C31 looks like Intel USB 3.0. There's also a Win7 driver for that at the link above.
I'm unsure about the final item, though, sorry. As yigit suggests, possibly searching the forum for parts of the text may turn up some clues.
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Similar Messages

Satellite P300 and XP - some drivers problems

Hi there,
My notebook: Toshiba Satellite P300 PSPC4E!
I switched from Windows Vista (preinstalled) to Windows XP Pro SERVICE PACK 2, but I got a few drivers problems:
1. USB-ROOT-DRIVERS cannot be installed.
Yep this doesn't work. Can't use any USB-Stick and stuff. I installed all drivers from the download page for my Notebook and Win XP for sure.
2. Mass Storage Drivers cant be installed:
Errormassage:
"This Computer doesn't have the Requirements to install this Software (translated)"
3. No WLAN Drivers from the Driver page work :(
Thanks for now. Would be nice to get some help.
Cheers

> Installed Win XP without SATA drivers, but changed the SATA value in the BIOS to compatibility! Can I update the SATA drivers now? (xp is installed)
No you cannot install the SATA drivers now because the HDD doesnt run in SATA mode. You changed it in BIOS to compatibility!
And now; if you would change the mode to SATA then you will get a BSOD and you will have to install XP again. So if SATA is set to compatibility mode -> you dont need to install the SATA drivers
> There is no WLan hardware found. Nothing :/
Check this Toshiba WLan page;
http://aps2.toshiba-tro.de/wlan/
Maybe one of the available WLan drivers will help you

Bootcamp Windows 7 install issues...can't pick a partition and drivers problem

I have two issues actually.
1. When I attempt to install Windows the setup begins but then it says that some required drivers aren't available. It tells me that I can eject the installation CD for this portion and put in a disc that has the drivers, but I can't eject the Windows 7 install disc. The eject key doesn't work and there's no manual eject pinhole on an iMac.
2. At the beginning of the setup, I'm not getting a prompt that tells me to select the partition to install it on. I don't know if that's supposed to come later but I don't want to install Windows over my Mac OS X partition.
What am I missing here?

I have this exact same problem with a 2010 iMac. I miraculously installed windows 7 back in 2010, but somehow in 2011 I'm getting this problem.. Please help!
I've tried reformatting my whole HDD, fresh installing snow leopard and then boot camp, and the same exact problem occurs. I am using a retail copy of Windows 7 Home Premium. It is an OEM version - is yours also OEM?
I have also using the windows 7 dvd to usb tool, and connected a usb stick with windows in it, but this doesn't help. I have NO IDEA what drivers windows is asking for on this dialogue box, as this is not specified. The only thing I can think of is drivers to read / write from the hard disk itself?
I greatly appreciate anyones ideas!

Hello, i own an i7 all in one mac. I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers

I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers to have a properly running system. I've thought as an option to re-download boot-camp and run the instalation from windows partition and see if i can repair it that way, didnt try yet thought just in case anyone has a better prposition or dealed with the same problem

Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck.

Powering off and Drivers problem.

Hi,
I just built my new rig afew days ago and all was well for until this morning. My rig keeps powering off by itself (no bsod or anything even though auto shutdown is disabled) and the power led on the case starts to flash on and off every second also the keyboard seems to still remain active (numerical lock led stays lit but non of the keys respond). The shutdown occur randomly and the only way to power back up is to disconnect the power cord for afew minutes and try again. I will be replacing the cheapo power supply with a Enermax EG465AX-VE in afew day hopefully but before I go out and blow £70 on one could anyone confirm this to be the most likely solution or could I try something else first.
The second problem I have got is that I can't install the Via 4in1 drivers (v4.51) and/or detonator drivers for the MSI FX5600XT card with out getting random lockups/frezzes and some programs failing to install e.g 3dmark2001 hangs half way through installation. I have re-installed Windows and am using the standard MSI drivers that came with the card. I also managed to install and run 3dmark2001 and Prime95 for 12 hours without any problems. But once I installed the Via drivers and/or Detonators /v45.27/v52.14/v56.64... and have AGP mode 8x enabled, I started to get those random lockups again so I uninstalled them.
Any ideas would be greatly appreciated.
System Spec:
AMD A64 3200+ with retail HS/F (Idle temp:42C, System temp: 36C)
MSI-6702 K8T800 Neo FIS2R with Bios rev: 1.4
2x 512Mb DDR400 Geil Value Ram (running at CAS: 2.5, TRAS:6, TRCD:3, TRP:3, Bank Interleaving:Auto, Burst lenght:8 Beat, AGP Mode can only select: Auto) @ 200Mhz) at v2.55 in bios.
Maxtor 160Gb SE
MSI FX5600XT with standard MSI Drivers (v5.2.1.4) that came with the card. Agp Fastwrites disabled, Apature 128Mb in bios, AGP mode: none.
DLink 530TX NIC
Plextor 40-12-40 CDRW (Secondary master)
Lite-on DVD Player (Secondary slave)
CTK el cheapo "550W" PSU (Max output 3.3v:28a, v5:45a???, 12v:20a) v3.3+ v5 combined: 280W.
Windows XP Pro with SP1 no updates added atm.

Hi,
I have installed the via drivers after uninstalling the MSI detonators then reinstalled detonator v56.72. I can now faithfully reproduce the 'invite loop error everytime I click on the FX5600XT tab in display setting and am getting a 'infinite loop error' 0x0..0EA. I have swapped both sticks of ram around tried one at a time but no joy.
@jacko
I am currently running on one stick , no shutdowns yet but it's still early days.
kHel.

[Athlon64] ATA HD, Core Center and Drivers problems...

My first problem is about my hard drive. I just recently build a new system and this is my first S-ATA Drive. It is a Seagate 160 gigs (ST3160827AS) and everything works fine... But my hard drive appears in the icon that said "Safely remove hardware". I know this is not an external HD, is internal, and I tried to install it on a Dell computer (Dimension 4700) and it was installed as an internal drive, the way it should be, not like a USB one... so does anyone know how to fix this? I'm not having any performances problems that I'm aware of... but I know this is not right...
My other problem is with tha Core Center, Digicell software... Everynow and then I get the following 4 messages, and both softwares failed to run from the start:
Core Center (Failed to load hardware monitor driver)
Digicell (Failed to load!)
Core Center (No Hardware Monitor)
Core Center does not support your motherboard!
I don't know what is the problem... I have a K8N NEO4 Platinum SLI so it is impossible that my MB is not supported... any clues about this?
My last problem is about some devices that are not correctly installed that appear in my device manager...One appear as a Other PCI Bridge Device and the other in the Raid controllers section as Mass Storage Controller. I tried to install the two floppy's that came with my MB but they don't seem to work...I also have this option in Windows update to install the Silicon Image Silicon Image SiI 3132 SATALink Controller... but Everytime I try, I get an error message... If anyone any solutions for this problems, please help me.... thank you in advance...

Press Start...then right click up at the top, pick Properties, then choose Task Bar....choose Customize...then look for the Safely Remove Hardware listing...then pick Always Hide!
Go to Add or Remove Programs in Control Panel, and delete CoreCenter and DigiCell. Then, try re-loading those programs form your MSI CD.
Personally...I don't use any of those, and find SpeedFan a much more accurate utility. You can download it from www.majorgeeks.com
If you are not using a RAID system...you don't need Silicon Image Controller.
Load your MSI CD, and go to Device Manager, and right-click on Other PCI Bridge Device, and choose Update Drivers from a specific location. It should find the application on your CD, then load.

ATI Radeon drivers problems (both open-source and proprietary)

Hi 2 All!!
I have a problem with my ATI Radeon 9000-series. The open source drivers (xf86-video-ati) don't work very good for me, my monitor's fresh rate isn't "at-top" and the monitor projection is slightly translated to the right (say 8-12 pixels). So I've tried to build the official drivers with ABS, all is gone successfully, except for some worrying warnings, but I thought that it's normal. I have a customized kernel, build through ABS... So, when I've tried to load the fglrx module it says:
# modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.27-ARCH/video/fglrx.ko): Cannot allocate memory
Please, help me! My machine is slow, I can't run any OpenGL-accelerated application, even Quake III!!! If you can suggest me how to improve the performance and how to resolve problems with open-source drivers, it also would be very good... Thank you and sorry for my poor English please.

I had some problems with installing ATI drivers recently (could not build fglrx module, not even manually, I had to change some installation script), but with latest driver version (8.11 I think) from ati.amd.com was everything fine (I have Radeon 9600 Pro)
Try to do this (and write here the output)
glxinfo | grep vendor
fglrxinfo
In both cases, it should write something like OpenGL...: ATI... if there will be MESA or DRI, that means that you don't have loaded your fglrx module.
If fglrxinfo output will be something like: no permission for...(should be first or second line of the output), then write this somewhere in your xorg.conf:
Section "DRI"
Mode 0666
EndSection
run:
modprobe -a fglrx - and give here the output. If there will be none, run:
lsmod | grep fglrx - to see wheter fglrx module is really loaded in kernel
if you will have no module, you can install one, type:
cd /lib/modules/fglrx/build_mod
sh make.sh
cd ../
sh make_install.sh (as root)
and post any warning or error here at forum, drivers (but not fglrx module) are installed at /usr/share/ati
After installing drivers, you also need to configure your system (notice your system that it's there), commands:
aticonfig --initial (for editing your xorg.conf)
aticonfig --overlay-type=Xv (acceleration support in xorg.conf)
Showing your xorg.conf file here is also good idea, here is mine (sections Device and Screen):
Section "Device"
#VideoRam 262144
# Insert Clocks lines here if appropriate
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

G510 audio driver installation problem on Windows 8.1

I've just received my brand new Lenovo G510 and installed Windows 8.1 Pro 64-bit onto it.
Most of the drivers from the attached CD installed without any problems (though I was quite surprised that no newer versions were available on the Support wrbpage) but I can't install audio driver.
Apparently this series is equipped in either Conexant or Realtek audio chips and the provided setup application is desigend to detect the correct chip and run the appropriate driver installation program.
The problem is that setup is not working for me. All I receive is the notification "This utility can not be used on this machine". Since there are no "orphan" audio devices in the Device Manager, I can't really tell which audio chipset is installed in my machine. I don't want to install both dirvers as it may just cause confilcts.
How can I say which audio chipset is installed and install the correct driver?
Solved!
Go to Solution.

hi mikolajek,
Welcome to Lenovo Community Forums!
Under Device manager
You should look for your Audio
Normally it stays under Sound and gaming controller,
And if no driver is installed in shows as High Definition Audio
Right click on it and select Properties
Go to the Details TAB
change the Value to Hardware ID then check the details
ex. PCI\VEN_14E4&DEV_4727&SUBSYS_051014E4&REV_01
Get the 4 digit after VEN and DEV
Ven is the Vendor and Devi is the Device
Go to PCI database and do a search for the VEN
Then search for the DEV and youll know that device
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

K9N-Platinum wrong cpu temp + nforce drivers problem

I have a msi k9n-platinum (ms-7250)
Cpu : Amd 64 x2 3800+
4 * 512 ddr II 533 samsung
Asus 7900 GT
6 x maxtor sata hd's
Power : hyper type-r 580 watts
pioneer 110d
lg combo cdrw-dvd
When i builded the system , i installed Windows XP + Sp2 , made all windows updates
After i tryed to install the drivers a got wit the cd.
My system was very instable (i had no problem whit the motherboard i had before)
I made the install more than once , but still got instability
So i went to the nvidia site and downloaded the drivers for the chipset from there , and also made a bios update to v 1.2
System went stable.
Tried again after the bios update with the original cd --> not stable , randomless reboot
so i'm now working with the nvidia drivers from the nvidia site , it's stable but when i go to bios i see that the CPU temp is -38°
Is it a fix for this or do i have a wrong mobo ????

-38°C , seen that a few times now .
I think you should RMA/return the motherboard .
Why , see:
https://forum-en.msi.com/index.php?topic=99547.0
https://forum-en.msi.com/index.php?topic=99573.0
https://forum-en.msi.com/index.php?topic=94762.0
Not the same board as yours but all have a faulty calibraded (non workin) sensor on their motherboards .
The positive thing though is that the boards with this issue that runs on AMI bios doesn't freeze/halt as the award based ones does.

MAX 14.0 broken and database corrupt after installing LV2014 and latest device drivers

I have LV2012 and 2013 (both 32-bit) installed on my Win8.1 64-bit system and have used them without problem. I recently went through the agony of installing LV2014 32-bit from Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work. Firstly, it is slow to populate the System information display, secondly when I try to expand a tree I get a MAX Database Connection Error (see attached), and there is no software listed at all. Thirdly, devices are not listed properly even though appearing in Device Manager (eg. a CAN interface no longer lists CAN0 but does show the device but no configuration, same for USB DAQ devices I(see attached), and I do have CAN 14.0 installed), and there is nothing under Data Neighborhood.
Initial attempts to install LV2014 were prevented by the NI mDNS Responder and related services not stopping when required by the installer. This also affected attempts to repair MAX.
All 3 versions of LabVIEW run OK, but projects no longer include remote or RIO/FPGA hardware - possibly due to uninstalled support software - but without the software list in MAX I cannot tell what is and isn't installed.
I have performed a Reset Configuration Data, repaired MAX several times, uninstalled it (any all dependencies), turned of the firewall and virus software, and completely reinstalled LV2012, LV2013, LV2014, and device drivers, but with no change to the problem. I have now lost 2 whole days and I am getting desperate for a fix. Surely this cannot be the only case of this in the whole world.
Mike
CLD & Alliance Member, UK
Solved!
Go to Solution.
Attachments:
MAX problems.jpg ‏218 KB
NI mDNS errors.jpg ‏102 KB
MAX Devices.jpg ‏83 KB

Hi Dr.M
In order to workaround and repair your MAX problems , please see the following article (the Knowledge based article mentionned in the error):
I know you have been through a couple of these steps , but there may be some related links that could help as well.
http://digital.ni.com/public.nsf/allkb/B9107A7F281F9B408625720B0078E5A8?OpenDocument
As for your installation errors:
This error happens when a service gets hung up in a "stopping" state that does not allow the installer or uninstaller to remove it. This can happen with a number of different services, but it has appeared to happen mostly with the Lookout Citadel Server (lkcitadel server) and National Instruments Time Synchronization (lkTimeSync).
-To resolve the issue, open up the Services application by going to Start»Run and typing "services.msc" without the quotes. In the window that opens, find the service that the error message references. It will usually have a status of "Stopping."
-Double-click on the service to open the service's properties window as seen below.
-Try clicking Stop to stop the service. If this does not stop the service, set the service's type to Manualand restart the computer. It is safe to set the service to Manual because it will be started manually if it needs to run. After the restart, the service will not start automatically and you will be able to install or uninstall your software as necessary.
As for the devices not being visible have you downloaded the NI DAQmx drivers correctly(after installing LabVIEW).
Regards,
Mark
Applications Engineer Intern
National Instruments UK and Ireland

U330 + Windows 7 Drivers Problem & Solutions

U330 Windows 7 Drivers
http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16
News Updates
11.4.09 - BIOS Release Fix Switchable Graphics and More
The new bios version 67 fixes switchable graphics issues from before and also enables VT mode for Intel's processor. Click here to download.
3.15.10 APS driver updates see links below
4.28.10 - BIOS update in test to address power consumption when using switchable graphics and resuming from suspend / sleep state. Will update once the BIOS is released to the web.
Problems with U330 drivers:
-APS is not accurate
Solution: Download and apply lattest APS drivers.
Download 32 bit Win 7
Download 64 bit Win 7
-Switchable graphics not working on both x86 and x64 platform
Solution: Download latest BIOS from here then flash your laptop and reinstall ATI Discrete Drivers.
-Screen brightness cannot be adjusted if switchable graphics is selected in the BIOS.
Solution: Should work now after you flash BIOS and reinstall discrete drivers.
-Windows restart will be stuck at a black screen (Not sure if this is related to drivers but most likely)
Solution: Should work now after you flash BIOS and reinstall discrete drivers.
-Secondary Display and Extended Display do not work
Solution: Should work now after you flash BIOS and reinstall discrete drivers.
Please send me a PM if you found solution to any of the problems listed above so I can update the thread. Thank you!
Recommendations:
Run Discrete Graphics
I've been playing around with the crippled drivers lately. I found that it's probably best to run discrete graphics since Intel GPU isn't really saving you power at all. I'm using drivers available through ATI's website. I'm getting around 3 hrs with power saving mode with some adjustments. My brightness adjustment works with ATI drivers and Window's dimming capability works. So in the long run that will probably save you more power than running Intel GPU. If anyone is able to get better battery life please let me know.
Disable APS
APS is not working properly so it's better not to have it at all in my opinion. It's constantly stopping the hard drive even though there are no strong vibrations or movement.
APS drivers have been updated and are reported to resolve prior issues.
Solved!
Go to Solution.

Hi,
I think that APS is not working properly. It is too acurate. When I just move my laptop in APS application I can see that my laptop is shaking for a 30 seconds and then my hard drive is stopped. I knew that everything couldn't be great. How can they (Lenovo) publish drivers without testing them?? Now there are two drivers, first the MOST important - switchable graphics - and now APS. I am just wondering why always Ideapads have to have problems with drivers?? We were waitng for a year without any support and now they give us faulty drivers. CONGARTUATIONS Lenovo!!!

K9N2GM loading sound drivers problem

Originally machine was loaded with XP SP2 and factory supplied drivers on CD (XP) All was sweet. SP3 was installed - still OK.
Windoze went slow so I have started from scratch and installed XP Home SP3 this time from original as always CD from M$.
All went sweet. Tried loading drivers from original CD and HD audio driver was complaining about SP3. But loaded driver anyway. No sound.
D/loaded drivers form MSI web page, went messy with previous drivers. Started again.
Loaded Win XP SP3 and loaded firstly system drivers, all went sweet. Loaded NVIDIA_MCP72_System_XP_MB.zip
Tried to load realtek_hd_all_mb.zip (d/loaded from Australian MSI web page) didn't look good, after restart no sound and in device manages Audio Device HD on Audio Bus still showing me that drivers are loaded.
Help! TIA

Hmmm... tried... didn't worked.
But... after installing original WinXP SP2 with original M/M drivers, no glitch in installation but sound doesn't work on SP2 either.
I have the same mobo on other computer and just connected two hdd's just to check s/ware config and... on both Sp2 and SP3 sound is working on my mobo.
Friend, who asked me to fix his machine because was slow, telling me that sound was always working on it.
It's there a possibility that his speakers (5.1) connected before to 3 outputs could cause the problem and on one (2 speakers on one green socket) the mobo would be confused?
I would say that very unlikely. Also transporting the machine in a car could damage something but when I move sliders of volume on Realtek software I can here scratchy sound every time I move the slider.
When I connect or disconnect the cable from the speakers, s/ware showing it immediately.
Any other thoughts???

How to download and install all drivers on my laptop..plz help

how to download and install all drivers on my laptop..plz helpthe pre installed OS was ubuntu but now i havve installed Windows 7 64 bit...i m not able to use internet through ethernet,my wifi is not working..and many such problems related to drivers.

How did you post this? Download the drivers to a memory stick. See Paul_Tikannen's post here: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/windows-7-drivers-for-hp-1000-1336TU-notebook/td-p/4852732

Drivers that are currently installed but its not familiar and theres no drivers being inserted

please help me what should i do.. is that a virus?? cuz i been seeing this drivers in my laptop but i havnt partitioned or inserted any drivers but then i still see drivers that are not familiar with me...theres 3 drivers or more please im afraid that
y laptop might have infected

Hi,
What are these drivers? and what's your problem?
To detect misbehaving drivers, please attempt to run Driver Verifier.
http://support.microsoft.com/kb/244617/en-us
Andy Altmann
TechNet Community Support

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694

G510 and r5 m230 drivers problem.

Similar Messages

Maybe you are looking for