G510 missing driver root/LenovoVhid

Hello,
I installed win 7 pro 64bit on a lenovo G510. Now there are one unknown devices, it is root/LenovoVhid. Does anyone know which drivers are missing?
Thanks much.
Link to image
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

For unknown device, install the camera driver for Windows 7 and check. Download and install camera driver (AVC, Bison, Chicony, Lite-On) from below link:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g510-no...

Similar Messages

Missing driver on PCI Express Root Complex

missing driver all it says is unknown driver on PCI Express Root Complex

Hi:
It is probably this, but I will need the hardware ID from the device if this isn't the driver you needed.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131788-1&cc=us&dlc=en&lc=en...

ERROR: Missing driver file /opt/SUNWjass/Drivers/ldm_control-secure.driver.

Environment:
Solaris 10u10
vm server for sparc 2.0 V22736-01.zip
p10264419_420_SOLARIS64.zip --> SUNWjass-4.2.0.pkg.tar.Z
Problem: Documentation and LDOM/SST tool refer to "ldm_control-secure.driver", but the file does not exist.
bash-3.2# ./install-ldm -p
Welcome to the Oracle VM Server for SPARC installer.
You are about to install the LDoms Manager package, SUNWldm, that will enable
you to create, destroy and control other domains on your system. You will
also be given the option of running the Oracle VM Server for SPARC Configuration
Assistant (ldmconfig) to setup the control domain and create guest domains.
If the Solaris Security Toolkit (SST) is installed, you will be prompted to
optionally harden your control domain.
Oracle VM Server for SPARC Configuration
Once installed, you may configure your system for a basic LDoms
deployment. If you select "y" for the following question, the Oracle
VM Server for SPARC Configuration Assistant (tty) will be launched
following a successful installation of the packages.
(You may launch the Configuration Assistant at a later time with the
command: /usr/sbin/ldmconfig, or use the GUI Configuration Assistant
which is bundled in the Oracle VM Server for SPARC zip file - see
README.GUI for more details)
Select an option for configuration:
y) Yes, launch the Configuration Assistant after install
n) No thanks, I will configure the system manually later
Enter y or n [y]: n
Given the capabilities of the LDoms Manager, you can now change the
security configuration of this Solaris instance using the Solaris
Security Toolkit.
Select a security profile from this list:
a) Hardened Solaris configuration for LDoms (recommended)
b) Standard Solaris configuration
c) Your custom-defined Solaris security configuration profile
Enter a, b, or c [a]: a
The changes made by selecting this option can be undone through the
Solaris Security Toolkit's undo feature. This can be done with the
'/opt/SUNWjass/bin/jass-execute -u' command.
Verifying that all packages are fully installed. OK.
ERROR: Missing driver file
/opt/SUNWjass/Drivers/ldm_control-secure.driver. <-------------- DOES NOT EXIST
bash-3.2#
bash-3.2# ls -al /opt/SUNWjass/Drivers/
total 876
drwxr-xr-x 2 root root 32 May 8 10:24 .
drwxr-xr-x 15 root root 21 May 8 10:24 ..
-r--r--r-- 1 root root 63935 Jul 25 2005 audit_private.funcs
-r--r--r-- 1 root root 42960 Jul 25 2005 audit_public.funcs
-r--r--r-- 1 root root 312 Jul 25 2005 clean.driver
-r--r--r-- 1 root root 2401 Jul 25 2005 clean.run
-r--r--r-- 1 root root 3093 Jul 25 2005 clean_private.funcs
-r--r--r-- 1 root root 53510 Jul 25 2005 common_log.funcs
-r--r--r-- 1 root root 10155 Jul 25 2005 common_misc.funcs
-r--r--r-- 1 root root 1023 Jul 25 2005 config.driver
-r--r--r-- 1 root root 20904 Jul 25 2005 driver.init
-r--r--r-- 1 root root 7299 Jul 25 2005 driver.run
-r--r--r-- 1 root root 39699 Jul 25 2005 driver_private.funcs
-r--r--r-- 1 root root 90923 Jul 25 2005 driver_public.funcs
-r--r--r-- 1 root root 38268 Jul 25 2005 finish.init
-r--r--r-- 1 root root 3861 Jul 25 2005 hardening.driver
-r--r--r-- 1 root root 598 Jul 25 2005 install-Sun_ONE-WS.driver
-r--r--r-- 1 root root 485 Jul 25 2005 secure.driver
-r--r--r-- 1 root root 1056 Jul 25 2005 server-config.driver
-r--r--r-- 1 root root 3784 Jul 25 2005 server-hardening.driver
-r--r--r-- 1 root root 1788 Jul 25 2005 server-secure.driver
-r--r--r-- 1 root root 1467 Jul 25 2005 suncluster3x-config.driver
-r--r--r-- 1 root root 4329 Jul 25 2005 suncluster3x-hardening.driver
-r--r--r-- 1 root root 2092 Jul 25 2005 suncluster3x-secure.driver
-r--r--r-- 1 root root 1446 Jul 25 2005 sunfire_15k_sc-config.driver
-r--r--r-- 1 root root 5845 Jul 25 2005 sunfire_15k_sc-hardening.driver
-r--r--r-- 1 root root 1791 Jul 25 2005 sunfire_15k_sc-secure.driver
-r--r--r-- 1 root root 274 Jul 25 2005 undo.driver
-r--r--r-- 1 root root 13976 Jul 25 2005 undo.funcs
-r--r--r-- 1 root root 2557 Jul 25 2005 undo.run
-r--r--r-- 1 root root 2151 Jul 25 2005 user.init.SAMPLE
-r--r--r-- 1 root root 498 Jul 25 2005 user.run.SAMPLE

Applied recommended patch cluster...
Explicitly applied 122608-08
bash-3.2# patchadd 122608-08
Validating patches...
Loading patches installed on the system...
Done!
bash-3.2# ls -al /opt/SUNWjass/Drivers/
total 966
drwxr-xr-x 2 root root 38 May 8 18:37 .
drwxr-xr-x 15 root root 21 May 8 10:24 ..
-r--r--r-- 1 root root 64345 Jul 23 2010 audit_private.funcs
-r--r--r-- 1 root root 41937 Jul 23 2010 audit_public.funcs
-r--r--r-- 1 root root 1007 Jul 23 2010 cis-config.driver
-r--r--r-- 1 root root 5311 Jul 23 2010 cis-hardening.driver
-r--r--r-- 1 root root 2242 Jul 23 2010 cis-secure.driver
-r--r--r-- 1 root root 312 Jul 25 2005 clean.driver
-r--r--r-- 1 root root 2434 Jul 23 2010 clean.run
-r--r--r-- 1 root root 3093 Jul 25 2005 clean_private.funcs
-r--r--r-- 1 root root 65067 Jul 23 2010 common_log.funcs
-r--r--r-- 1 root root 10298 Jul 23 2010 common_misc.funcs
-r--r--r-- 1 root root 1023 Jul 25 2005 config.driver
-r--r--r-- 1 root root 22242 Jul 23 2010 driver.init
-r--r--r-- 1 root root 9092 Jul 23 2010 driver.run
-r--r--r-- 1 root root 42969 Jul 23 2010 driver_private.funcs
-r--r--r-- 1 root root 96975 Jul 23 2010 driver_public.funcs
-r--r--r-- 1 root root 39218 Jul 23 2010 finish.init
-r--r--r-- 1 root root 3888 Jul 23 2010 hardening.driver
-r--r--r-- 1 root root 598 Jul 25 2005 install-Sun_ONE-WS.driver
-r--r--r-- 1 root root 1499 Jul 23 2010 ldm_control-config.driver
-r--r--r-- 1 root root 4809 Jul 23 2010 ldm_control-hardening.driver
-r--r--r-- 1 root root 840 Jul 23 2010 ldm_control-secure.driver
Thanks.

WudfRd, ROOT\LENOVOVHID\0000 error on Flex 14

I keep getting these 2 error msgs in Event Viewer on my Flex 14...anyone know what they are and how to resolve them? Thanks!
The driver \Driver\WudfRd failed to load for the device ACPI\ACPI0008\2&daba3ff&2.
========================
The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000.

Got exactly the same problem with my Yoga 13.
Seems to have happened after the latest windows update, resulting prolonged boot time

How do i install a missing driver?

i have a missing driver im not sure which one and i dont know how to find out.
how do i install this driver (where do i get it from)?
its a 4th gen ipod touch on ios 6.1.4 i think, i tried to restore it to a previous setting as it was freezing and kept crashing all the apps.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates

Missing driver with windows 8.1 installing or restoring

Hi all,
If I try to do a clean install of windows 8.1 the installation routine tells me helpfully that I am missing a media driver. The only way I could get round this was to create a USB bootablke disc and then add ALL the lenovo drivers that I have down loaded cfrom the lenovo site. This worked and it appeared to scan the USB drive and find whatever it was looking for. I'm still none the wiser as to what it was missing.
This problem is compounded when you try to restore from a backup image created in windows (I have a new drive and wanted to clone my old system). It finds the restore image on the external USB drive but can't seem to find the internal drive. This time however it won't scan a folder but wants me to provide the location of the actual INF file for the missing driver.
Can anyone help? I am assuming its the data/drive controller but I can't find it anywhere.
Thanks

hi Rolf,
You most tikely have the Seagate ST500LX005 SSHD.
just to verify, using this guide as a reference, are you getting stucked at Step 7? Also, is the SATA Mode set to AHCI under BIOS?
When you get the prompt to provide the location of the actual INF file for the missing driver, can you consider the following:
1. Download the f6flpy-x64.zip file on either of the links below and extract it on a usb flashdrive.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22194
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22676
2. Before running the system image recovery, insert the usb flashdrive and locate the iAAHCIC.inf / iaStorAC.inf file on flashdrive and use this path when you get the prompt to provide the location of the missing driver.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Missing driver problem

hey cisco i was just setting up a network share on my wifes vista computer and got a missing driver and it seems to be a often occuring problem for many people please have your support team take a look at this http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/windows-needs-to-install-dri... ... it seems someone forgot to write a vista driver ... i have another question for you lol how is it no matter what i do i always run into every problem imaginable going on 20 years now?

That’s simple enough. Uninstall Cisco Connect from your computer, and download and install the latest one from homesupport.cisco.com

Windows 7: grant one program permission to write to C drive root

I have one program we use on our domain which for some stupid reason wants to copy a file from wherever it is located to the C drive before it opens the file. It's very dumb the way the program is set up to have to do this. The program won't continue running
if it cannot copy the file to the C drive. If I run the program with administrator permissions, the program can copy the file to the C drive. If I run with user permissions, the program can't copy the file, because users can't write to the C drive. I want
my users to stay users.
The vendor may fix it in a later version, but that may take some time, and the new version is going to have its own glitches. The program is essential for our business and we can't dump it and move to something else.
Is there a way to grant this one program to be able to write to the C drive root?
EDIT- to fellow googlers: The marked answers below would work for normal programs, and using Runas did work when I tried it on Notepad. But they did not work on the business program I was running. Something about the program won't allow it to run from another
account using Runas, and I can't edit the program to give it admin credentials from within.

Hello RnGScottgus1,
Do you mean that you want to use other account to run this program as administrator?
Please take a look at the following thread similar to this issue.
https://social.technet.microsoft.com/Forums/en-US/0339772f-9f9b-4381-b513-73b263e2cf2f/how-to-run-a-program-as-an-administrator-from-within-a-nonelevated-command-prompt?forum=w7itprogeneral
• Enable the built-in administrator account
• Use the command runas /user:ComputerName\Administrator /savecred "Full path to program's exe file"
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Missing driver PCI\VEN_1180

Missing drivers PCI\VEN_1180……..Help!!!!
After upgrading to Windows 8.1 from Vista:
I am missing the following drivers for Base System Devices here is the information for the driver.
I am unable to use my Built in Camera, CD/ROM Drive, System speakers.
HP Pavilion dv6000
HP Pavilion dv6500 on the label
Dv6552ea on the label
Product NO: GT374EA #ABU
PCI\VEN_1180&DEV_0592&SUBSYS_308F103C&REV_12\4&11e13b16&0&2B40
PCI\VEN_1180&DEV_0812&SUBSYS_308F103C&REV_12\4&11e13b16&0&2C40
PCI\VEN_1180&DEV_0803&SUBSYS_308F103C&REV_12\4&11e13b16&0&2A40
Please can anyone help me install the missing driver thank you?

Paul Tikkanen,
Thank you very much for your reply, unfortunately, I have already installed these drivers including the previous versions with no luck.

Why are my render files in my boot drive/root directory?

I have configured FCP to use an external drive for my Scratch Disk to render Video Capture, Audio Capture, Video Render and Audio Render as well as the Waveform Cache, Thumbnail Cache and Autosave Vault. Plenty of room on it and for the most part, I see a lot of render files on it, just like it should do.
However, if I leave FCP running for a while, it will start to auto-render again and does so placing tons of huge files on my local boot drive right on the root directory under a folder called "Render Files". It ends up filling up my boot drive every time and need to delete them.
I have searched everywhere to find where to configure this to move it to my scratch drive, but no joy.
How do I get FPC to render these files on a non-boot drive scratch disk?
Thanks.

That's possible that's it going to sleep. But I don't think so. The problem happens when I let the editor sit too long without doing anything in it (get up for a cup of coffee, using another application to generate some text effects, etc). Then its starts rendering on its own and does so only with the local boot drive/root directory.
When it comes back, the "green line" (Preview Render) is gone and the lines are replaced with dark blue, which I think indicates the sequence was rendered in the highest possible res/codec I have selected. That's fine, but why does it insist on using the local drive when I have another specified?

Missing driver and "System Interrupts"

Hello!
I found 2 problems on my brand new HP Pavilion 11-n070eg x360 :
- In Device Manager, i have a missing driver und "Other Devices" (See screenshot). Tried to update / install, but dont know what it is. Also tried "Slim Drivers" to check for missing drivers, didnt find anything. Also HP Support Assistent doenst find missing software / drivers.
- In Taskmanager there is a process called "System Interrupts" (See screenshot). It takes CPU power from 15%-30%.
It disappeared after a restart, but know its back after a while! I read online it has something to do with missing / corrupt drivers, so i hope there is a connection between my to problems.
Name: HP Pavilion 11-n070eg x360 ( Intel )
Product ID: 00258-60101-73698-AAOEM
Windows 8.1 x64 (everything up-to-date)
bought 2 weeks ago, not much installed. Standard Antivirus (Windows Defender), no Tuneup Software installed.
Thank you very much, i hope someone can help.

Then you will need to post the hardware ID for the unknown device, because I played my one guess card and lost.
Go to the device manager and click on the unknown device.
At the top of the Unknown Device window, click on the Details tab.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the second item (hardware ID's).
Post the top string of characters you see in the window.

M93z - missing driver in System update

Hi,
Missing driver for cardreader when using latest System update. Can you please publish this one ASAP?
Realtek Card Reader Driver for Windows 7 (32-bit and 64-bit)
c1car10us17.exe
Type: 10AD

Isn't this what you are looking for HERE? Drivers for the card reader show up in the matrix under "Camera/Card reader", there are also drivers for Windows 8 and 8.1.

Read this for CD/DVD Drive with burning, missing drives, not seeing discs

Seeing lots of the same posts with the same solutions being applied (mostly upper/lower control filters/MS Fixit)... so I thought I'd put this up for everyone.
*Update* If this helps, please click the kudos to the right as I'm trying to gauge how effective this is. If you have the time to help the community, please reply stating what did or did not work.
There are some helpful HP support articles that you may want to try before posting:
If your drive cannot burn discs... or you can burn CDs but not DVDs (or vise/versa)... read this...
Drive Cannot Write to Writable Discs (Windows 7)
Drive Cannot Write to Writable Discs (Windows Vista)
Drive Cannot Write to Writable Discs (Windows 98, ME, XP)
Summary:
1) Try different discs! Cheap discs can be hit or miss. Find a disc brand and type that works best.
2) Try burning at a slower speed (not the best option, but can often get the job done if the laser is fading).
3) Remove drive from Device Manager and remove upper/lower filters (see below).
4) Use MS System Restore to go back to a time when it was working.
5) Use PC-Doctor/HP Hardware Diagnostic software to check for a bad drive.
6) If the drive is not bad - save your files and use HP Recovery to put the system back to the beginning.
If your drive cannot read discs; CDs or DVDs or both...
Drive Cannot Read Discs in Windows 7
Drive Cannot Read Discs in Windows Vista
Drive Cannot Read Discs in Windows 98, ME, and XP
Summary:
{restart the PC at least once to see if the drive shows up on boot}
1) See if the drive is listed in Device Manager (look for problems if it is).
2) Check autoplay (skip if you don't use).
3) Make sure a bad disc isn't knocking out the drive (an operating system mounts discs as drives and things can get screwed up).
4) Try reading the disc from a command prompt environment (outside of Windows).
5) Reinstall drive from Device Manager (if drive is listed). {I'd replace this with bigger process of remove upper/lower filters (see below)}.
6) Use MS System Restore to go back to a time when it was working.
7) Use PC-Doctor/HP Hardware Diagnostic software to check for a bad drive.
CD/DVD drive is missing (not in Windows Explorer or My Computer or in burning software)...
CD/DVD Drive is not Detected (Windows 7)
CD/DVD Drive is not Detected (Windows Vista)
CD or DVD Drive is not Detected (Windows 98, ME, or XP)
Summary:
1) See if the drive is listed in Device Manager (troubleshoot based on what you see).
2) Reset Power: Unplug power cord, press Power button for 10 seconds.
3) Check power and data cables attached to the drive and look in the BIOS for the drive name.
4) Remove upper/lower filters (see below).
5) Reinstall burning software
6) Get and CD/DVD drive firmware updates if available (to prevent missing drives in the future (I assume)).
7) Use MS System Restore to go back to a time when it was working.
Stuck Drawer...
Opening a Stuck CD or DVD Drive Tray
Summary:
1) Press eject button on case, on drive, button on keyboard (if exists).
2) Right-click drive icon in Windows and select Eject.
3) Turn off PC and inert a straightened paper clip into the manual release hole on the drive.
4) Check the power cord on the back of the drive.
MS FIXit, Resetting Upper and lower Filters (XP, Vista and 7)
First... try to use the MS Fixit (for Vista) if you are on the computer having the problem)...
Microsoft Fix it Solution
Otherwise, here are the manual steps (overview):
1) Uninstall the CD/DVD drive in Device Manager and DO NOT RESTART the computer.
2) Uninstall your CD burning software (make sure you have the installation disc or you can resinstall from Start, Programs, PC Help and Tools, Recovery Manager (or Driver/Application Recovery). If you don't have the installation discs, skip this step - it might still work).
3) Open the registry editor (Start -> Run -> enter Regedit) ... might want to make a backup of the registry at this point.
4) Open the following keys:
+ HKEY_LOCAL_MACHINE
+ SYSTEM
+ CurrentControlSet (or the current control set with lowest number if that is all that is listed)
+ Control
+ Class
5) Select 4D36E965-E325-11CE-BFC1-08002BE10318. It has to be this exact key - make sure you can see the last numbers!!!
6) Delete the UpperFilter and or the LowerFilters value in the right window if either exists.
7) RESTART the computer - this step is important. Wait for Windows to find and install the CD/DVD drive you removed earlier.
8) Reinstall your burning software and restart the computer again.
Message Edited by GarenT on 10-07-2009 06:32 PM
Message Edited by RasterBlaster on 11-30-2009 03:51 PM
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

G710 / Win8.1 Pro - missing driver Microsoft ACPI-Compliant Embedded Controller

Just complete installing Win 8.1 Pro on my new G710. I got this message - missing driver Microsoft ACPI-Compliant Embedded Controller. Some users said that it can be solved with "Power Management" Driver but this one doesn't in Win 8.1 list. One user said that PM driver made his computer to slow down. Other users said that it is "Radio switch HW" driver but it is not relevant to G laptop. Any idea what to do?

hi
Yes this is the Detected device for Power Management.
This just allows you to control The system power distribution.
If you don't want to use Lenovo Power Management then that's just absolutely fine.
Windows has its own controls for power.
No need to wory about that ACPI\VEN_VPC&DEV_2004
This is one of my thread where the PM solved it
http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/acpi-vpc-2004-driver-for-win-7-32bit-sp1-lenov...
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

MSI GE70 0NC - Missing driver HELP!

Hi people,
So I have owned my notebook since september, and just recently (December time i think) I started to get the BSOD when checking the stop codes i found that the code was linked to the video card failing. I checked my drivers to see if any needed updating or where missing since i installed windows 7 and got rid of 8 as I use this notebook as a cad and rendering station for work. I noticed i have two missing drivers that windows cant automatically install. one is a PCI Device for PCI bus 2, device 0, function 0. ( PCI bus 0 and 1 are my Intel 4000 and GTX 660m display adapters). and the driver status says "The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver." the next missing driver is labelled as unknown device and upon reading its properties gives me this location info on Microsoft ACPI-Compliant Embedded Controller with the same status as before. I have been on the MSI downloads for my notebook and have downloaded all drivers/ BIOS/ Firmware that i can, with no success.
Can anyone help me find these missing drivers to see if ths stops the BSOD because i really cba sending it to MSI for them to say it's a software issue and my fault for changing to windows 7.
Thanks
Callum

chipset drivers: http://download.msi.com/nb_drivers/cs/cs_intel7series_9.3.0.1020_al00.zip
Intel HD card: http://download.msi.com/nb_drivers/vga/vga_intel_gt650m_gtx660m_9.17.10.2884_0x76849241_8764.zip
Nvidia drivers: http://download.msi.com/nb_drivers//vga/beta_nv_8.17.13.275_w764.zip
[or latest one from Nvidia.com]
all drivers at: http://www.msi.com/product/nb/GE70_0NC.html#/?div=Driver&os=Win7 64
you may have some device with no drivers for it, this is because Win8 BIOS/EC has addiction airplane modes,
which can't be used under Windows7, but that's not a reasons for any BSODs

G510 missing driver root/LenovoVhid

Similar Messages

Maybe you are looking for