G530 4446-35u

Hi
this is my first time doing this so i appricate any help and suggestions that are given.
i have a g530 4446-35u and it died, it would not boot, then i followed what it said to do with the one touch button., it sits in a black screen and does nothing but blink a cusor.
i bought a new drive and followed instructions to load a clean copy of xp on the new drive. it loads to the point where it says that it is going to start windows and then i get the same blue screen as if i had the old drive in.
error message is stop.1 0x0000007B
i do not know what to do to fix my problem
could some one please help me solve this problem
thank you

You need to enter bios on boot, and change hard drive mode
to "compatability mode", save and restart your install.
Should work?

Similar Messages

What is the correct BIOS update for my G530-4446-35U?

: 6get17ww is the current BIOS version on my machine, In one place I found 6get19ww to be the latest BIOS BUT anoter one I found something else: CON52WW here: http://consumerdl.lenovo.com.cn/UserFiles/Driver/en/Downloads%20and%20Drivers/G430/0CCN52WW.txt

masi wrote:
: 6get17ww is the current BIOS version on my machine, In one place I found 6get19ww to be the latest BIOS BUT anoter one I found something else: CON52WW here: http://consumerdl.lenovo.com.cn/UserFiles/Driver/en/Downloads%20and%20Drivers/G430/0CCN52WW.txt
Hi masi,
Update bios only if necessary. You may use the version in this page for your Type 4446 machine.
Hope it helps.
Cheers,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Lenovo 3000 g530 4446-35u Vista 64 bit Driver problems

I recently purchased the laptop in the subject line. I immediately replaced the hard drive, the ram, and installed vista home premium 64bit. I was able to find drivers for everything but the touchpad device. I have been unable to determine the tech specs for the device or find a driver. Any suggestions would be appreciated.

if you want to know more about the subjectyou can people go there
http://www.vista4beginners.com/DPC-Latency-Checker
for all ich9 usb and with broadcom network cards this and my coment can be usefull.
have a nice day,
Mike

G530-4446 - Win7 - Scroll on touchpad no longer works

Hey, I recently had to reinstall Windows 7 Ultimate on my G530-4446. My touchpad works, but the scrolling doesn't. When I go to Control Panel > Mouse - I notice that the settings are no longer there to control the scrolling. I remember there was a driver I downloaded previously that corrected this issue, but cannot find it anywhere (I've been searching for 2 solid days now). If anyone could help me out, I would greatly appreciate it. Thanks in advance for any help you can provide.

hi mcal,
May I ask about other feature did that driver put back some other feature no your touchpad?
I would suggest doing a clean install of that driver.
try to look first under control panel Programs and features look for a synaptics software the un-install it.
After that do a restart and reinstall the Driver again.
also try to access the Setting under mouse properties
and check if the scrolling are enabled.
link to sample photo
that photo may not be exactly the same but that should give you a hint on where to check.
Hope this helps,
Cheers!!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

G530 (4446-22G) unknown devices after Win7 installation

Hi,
I recently installed windows 7 ultimate 64-bit on my father's Lenovo G530 (4446-22G) laptop. In device manager I see 2 "base system devices" in yellow that are not recognized. Does anyone have any idea what those devices might be? I attach screenshot of the device manager both by type and connection.
Also, I installed the Energy Management for win7 64-bit but the Fn keys do not work. Any suggestions about this?
Thank you in advance.
Solved!
Go to Solution.

Hi, i believe your Lenovo laptop is abit older model. Pardon me. Try install this and see if it solves your Fn keys not working.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/52pm06ww.exe

Ac adapter for G530 4446-25U

I have lost my ac adapter and need to acquire a new one.
The case says;
<<input 19 V 3.42 A or 4.74 A >>
The manual says, <<(AC adapter)
Input rating of the AC adapter: 100-240 V ac, 50 to 60 Hz
65 W (with integrated graphics card)/90 W (with discrete graphics card) >>
How do I determine whehter I have an integrated or discrete graphics card?
Also, are there any recommendations about where to aquire this replacement adapter?
thnx and rgds,
John
Solved!
Go to Solution.

John, welcome to the forum,
If you enter your type and model number on this site you will receive a description of your system as follows;
Product:
3000 G530 4446-25U
Operating system: All
Original description: T6400(2GHz), 3GB RAM, 250GB 5400rpm HD, 15.4in 1280x800 LCD, Intel
4500MHD, CDRW/DVDRW, Intel 802.11agn wireless, Modem, 10/100 Ethernet,
Touchpad, Camera, 6c Li-Ion, WinXP Pro
Your graphics chip is the Intel 4500MHD which is an integrated chip meaning you can use either the 65W or 90W adapter which you should be able to order from the Lenovo site.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Help Lenovo G530 4446 BIOS Menu!!

Does anyone know what is there in the BIOS menu of this laptop Lenovo G530 4446...
Tell me where is the Onboard graphics - Dedicated video memory if available so i can change it....
Thanks.

If you have the InsydeH2O "BIOS" the option doesn't appears. At least, I saw in mine and it doesn't.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

Vista 64-bit on 3000 G530 4446-38U?

I'm a little bit dissapointed that 3000 G530 4446-38U laptop did not come with 64-bit operating system. In fact since specs listed 64-bit processor I assumed I would have a 64-bit operating system. I do have Vista Ultimate 64-bit, problem is there is no drivers for this 64-bit operating system.
Will lenovo release 64-bit version of drivers for Vista?
P.S. Signing of drivers is not necessary, since there are ways to make 64-bit Vista not check for signed drivers.
Message Edited by alexmia on 07-25-2009 05:49 PM

?.....search at Lenovo Support - Downloads&Drives. or..call to the Support line, they will tell you exactly what is the status for the 64 ver.

Specifications for G530 4446-36U?

I have ordered a new G530 4446-36U from a Lenovo reseller and am having trouble finding detailed technical information about it. (The model is not in the most recent 3book.pdf, for instance.) I'm not even sure whether this model is in the commercial or consumer line.
I plan to do a clean install of Windows XP on this machine, which will require me to find the most correct and up-to-date set of drivers. I'm wary of the list I have been served when putting my model number into the Lenovo web site--that list includes drivers such as nVidia graphics and Bluetooth that I'm pretty sure none of the G530 4446 machines need. I also am worried about being pointed so often to N500 drivers and information--are those models really the same in all relevant respects?
Furthermore, in a look through this forum, I have noticed that some Value Line customers have had trouble after trying to upgrade the BIOS, and other G530 owners running XP have problems with video resolution. I'm hoping to avoid those situations by finding the most correct and complete drivers, documentation, and specifications.
I would be grateful if someone could point me to the most specific and accurate information available about the G530 4446-36U.
Message Edited by KevinTMC on 07-31-2009 12:01 PM

Hi KevinTMC,
4446 is definitely a commercial product instead of consumer line.Commercial products has only 7 digits of serial number.
You can get the drivers from Lenovo Support Page or here to be exact .
The http://consumersupport.lenovo.com page is for consumer products other than 4446 type.
If you browse through the Lenovo Support Page, you'll be able to see your machine description as below:
Product: Lenovo G530 4446-36U [change]
Operating system: All [change]
Original description: T4200(2GHz), 3GB RAM, 250GB 5400rpm HD, 15.4in 1280x800 LCD, Intel 4500M, CDRW/DVDRW, 802.11bg wireless, Bluetooth, Modem, 10/100 Ethernet, Touchpad, Camera, 6c Li-Ion, WinVista Home Premium 32
Hope these help.
Regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Attachments:
G530_driver.JPG ‏28 KB

Friends G530 4446-36U died

my friend gave me his laptop to try and fix. its a G530 4446-36U. It would sit there on startup repair for over 10 hours and nothing happened. I backed up his stuff and use the lenovocare to get it to do a full restore. It restarted, and then it said BOOTMGR is missing press ctrl-alt-del to restart. i did and now it just sits at a black screen when you turn it on. i really really need help guys!

sometimes it just happens without no reason.
you need to perform clean windows installation to fix the issue. try to use novo button. ( one key recover button ) if it doesn't work, try to use recovery disks, if you don't have any, you can use microsoft windows installation dvd then enter your serial number from the stick under the laptop. but if you do that with microsoft dvd, one key recover system may not work.
you can also ship your laptop back to lenovo support line.

BIOS update crashed G530 4446-23U Win 7 32 bit

I have installed latest BIOS upgrade from Lenovo and my laptop crashed. (June 24 2011)
Will not boot, Lenovo restore doesn't help, can't boot from Windows 7 DVD
Does anyone know of a utility to create a bootable USB (or disk) BIOS flash
to roll-back to a working version of BIOS?
Lenovo G530 4446-23U, no HDMI support
Operating system: Windows 7, 32Bit.
Solved!
Go to Solution.

Yeah.... Warranty .... Thank you!
This is a solution which actually works;
It was recommended by a brilliant friend who is not associated with Lenovo:
create bootable usb flash drive
here is a link to download wintoflash utility:
http://download.cnet.com/WinToFlash/3000-2094_4-10974471.html
Unzip 6get19ww.exe to the usb flash drive to a folder (for example C:\SOS)
boot computer from newly created usb flash drive (if Windows doesn't work, use command prompt)
locate an old bios file on a crashed machine. It should be name bios.bak
copy located file to another folder with the name bios.wph for example (C:\SOS\bios.wph)
run WinPhlash.exe from a folder (for example C:\SOS)
specify backup file for existing BIOS as bios1.bak
specify new BIOS file as C:\SOS\BIOS.WPH
flash BIOS
Everything WORKS!

G530 (4446) wireless lan problem on Windows Vista 32bit without AC

I have new G530 lenovo laptop with the following problem
After I have enabled the wireless driver (pressing Fn+F5) and moving the switch in front of the laptop, the wireless led is blinking BUT, I can't find any wireless networks. When diagnosing the problem with windows vista,it tells me that the wireless should be turned on.
Of course, it is ON. After I have reinstalled the wireless driver again from your the support site, the problem disappeared, but reappeared after a couple of days.
I do not use Access Connections. I have Uninstalled it since I don't need it
I have seen this problem on several sites when I googled for a solution.
I need a deterministic solution:
a. What drivers should I update?
b. In which order should I update them?
c. What configuration should I change from their default?
d. What causes this problem and can I prevent it from happening (like- don't go to standby but just to hibernate state)?
Thanks
Guy

Hey, guys.
I just discovered that the computer had no issue at all.
The problem was with me.
Somehow I managed to disable the wireless network.
I just typed Fn+ F5 and reactivated it.

G530 4446-3FG No Modem Driver and Sound Driver work from Support & Download Center

ping at all,
when i try to install the connex audio driver or even modem driver for my new 3000 G530 446-3FG Notebook an error appears with an error alert -> device not found...
Conexant Audio Driver for Windows XP
Conexant Modem Driver for Windows XP
has anyone an idea for me?
thanks in advice, daniel
Message Edited by webmove on 07-02-2009 08:56 AM

My issue was similar. I don't know if this will help but support did nothing for me either.
I had problems upgrading and had to install from scratch. The install appears to have created a new Download folder at install (same date and time). I could not access the folder nor could I see any permissions or view or change the owner. I ended up turning off uac and restarting. I deleted the folder and created a new one. No problem now. You might check any itunes folders created with the install for the same permission issue.

Screen brightness not adjustable G530 4446-36U Windows 7

I have followed nearly every thread on this topic, and downloaded every driver, file and update I could find. I still can't dim the screen brightness on my Win 7 (32 bit) machine.
If someone can point me in the directions of some CLEAR instructions, I would be most grateful.

This is how my Mobility Center interface looks like:
(just in case if it's helpful to troubleshoot)

G530-4446-24U takes FOREVER to POST after BIOS update

Hey,
I just installed Win7 Pro 64-bit a couple of hours ago and lost the ability to adjust my screen brightness. After installing chipset and power management drivers I still had no luck. So I updated the BIOS with this file.
Now it all works well once I'm booted into Win7, but it takes a very long time to POST when I push the power button. I haven't timed it, but it seems to be over 60 seconds before I have anything displayed on my screen. When it does start POST, it works fine at the expected speed. It also restarts when attempting to wake from sleep, and the same problem as mentioned above applies as it must POST again.
Is there a more appropriate BIOS update for my machine, or is this a terrible bug that must be worked out?
Thanks in advance.
Solved!
Go to Solution.

I couldnt flash either from Windows 7 pro x64. I ended up using BartsPE to run the flashing program. I dont have the speed issue, it boots up with the same speed it always did. you should make sure you used the right BIOS. i had the problem once, but it seems to be working now. I still havent gotten the Brightness to work though.
as for the "Cannot load driver C:\Drivers\BIOS\6get18ww\PHLASHNT.SYS. Please check your accounts, if you have no administrator privilige, please login again! This driver has been blocked from loadingError code: 1275" message, this is because it uses a 32 bit driver. You cant use these drivers under 64 bit. my solution worked really well. if you want to use and need help configuring the PE, i can help.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

G530 4446-35u

Similar Messages

Maybe you are looking for