G530 4446-3FG No Modem Driver and Sound Driver work from Support & Download Center

ping at all,
when i try to install the connex audio driver or even modem driver for my new 3000 G530 446-3FG Notebook an error appears with an error alert -> device not found...
Conexant Audio Driver for Windows XP
Conexant Modem Driver for Windows XP
has anyone an idea for me?
thanks in advice, daniel
Message Edited by webmove on 07-02-2009 08:56 AM

My issue was similar. I don't know if this will help but support did nothing for me either.
I had problems upgrading and had to install from scratch. The install appears to have created a new Download folder at install (same date and time). I could not access the folder nor could I see any permissions or view or change the owner. I ended up turning off uac and restarting. I deleted the folder and created a new one. No problem now. You might check any itunes folders created with the install for the same permission issue.

Similar Messages

  • Qosmio G10 Graphics and Sound driver installation

    Hi
    I have recently tried to reinstall my Toshiba Qosmio G10 after downloading all the latest drivers of the Toshiba site.
    Unfortunately I have had my motherboard and display replaced over the last 3 years (under Warranty) , which means all the hardware has changed from the original laptop I bought (now has Graphics card ,NVIDIA GeForce go 6600, new chipset, etc, as far as i remember).
    Does anyone have a system recovery cd or a place I can download the correct drivers for this laptop.
    I am a sys admin, and technical and have spent about 5 hours pulling out my hair trying to get the video and sound drivers working.

    Hi!
    It is pretty easy to get drivers for a Toshiba notebook.
    Did you search on Toshiba website?
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Search for Qosmio G10 and then you will find it.
    Bye

  • I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

    I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
    I have iPhoto version 9.1.5 (615)
    Mac OS X version 10.6.8
    I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
    if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
    if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
    if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
    Any help would be greatly appreciated

    Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
    The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
    For the annoying start-up message:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

  • Legacy IDE Hard Drive and DVD Drive

    I wondered if anybody could send me in the right direction with this...
    I have got the A55M-E33 motherboard and try to connect my old hard-drive and DVD drive (both IDE) to the motherboard using IDE to SATA converters. The BIOS detects both drives, however I don't think I got the right BIOS settings to accommodate the way the drives should be addressed. Has somebody used this kind of setup and would kindly share their experience please?
    Thanks

    what doesn't work?
    also provide detailed system specifications, see >>Posting Guide<<

  • Secondary hard drive and dvd drive have the same location id's.

    Product Name: HP Pavilion dv7 Notebook PC (DV7t-7000)
    PRODUCT NUMBER: A5F92AV
    SERIAL NUMBER: [removed for privacy]
    My Secondary hard drive and dvd drive have the same location id's. The dvd drive can not write to any disk because of it. Had the dvd drive replaced and that did not help. Tried 3 different HDD and all the same outcome.
    Secondary hard drive and dvd drive have the same location id's. The dvd drive can not write to any disk because of it. Had the dvd drive replaced and that did not help. Tried 3 different HDD and all the same outcome.
    Please help,
    Thank you
    -Rick

    This is what chat support said... Its like talking to yourself sometimes!!
    [Wednesday, October 24, 2012 10:33 PM] -- Automatically generated message:
    Your support request has been submitted and is in queue. Please wait momentarily while the system connects you with the next available support specialist.
    [Wednesday, October 24, 2012 10:46 PM] -- Automatically generated message:
    You are now chatting with support specialist JOLLY R.
    [Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
    Welcome to HP Total Care for Notebook and Desktop support. My name is Jolly. I will be your technical support specialist today. Please give me a few moments to review your issue description details.
    NOTE: For security reasons, PLEASE DO NOT send credit card information via chat.
    [Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
    How are you doing today ?
    [Wednesday, October 24, 2012 10:46 PM] -- Rick Friedman says:
    Hi Jolly, I tried 3 different HDD's all of them were reformated and reimaged with the HP image from this laptop. When I try to populate the drive, it just closes the window. Same with the dvd drive. Other then no able to write to the dvd/cd drive, everything else is perfect. But that is not good enough...
    [Wednesday, October 24, 2012 10:46 PM] -- Rick Friedman says:
    Great, you?
    [Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
    I am fine. Thank you for asking.
    [Wednesday, October 24, 2012 10:48 PM] -- JOLLY R says:
    Please let me know if the following details are correct for the notebook in question.
    PRODUCT NUMBER: A5F92AV
    SERIAL NUMBER: {Private Information Removed}
    EMAIL ADDRESS: {Private Information Removed}
    Am I correct?
    [Wednesday, October 24, 2012 10:48 PM] -- Rick Friedman says:
    Yes
    [Wednesday, October 24, 2012 10:48 PM] -- JOLLY R says:
    Thank You for confirming the details.
    [Wednesday, October 24, 2012 10:49 PM] -- JOLLY R says:
    Are you using the same notebook to chat with me which is in question?
    [Wednesday, October 24, 2012 10:49 PM] -- Rick Friedman says:
    Yes
    [Wednesday, October 24, 2012 10:51 PM] -- JOLLY R says:
    May I know since when you are facing the issue?
    [Wednesday, October 24, 2012 10:51 PM] -- Rick Friedman says:
    I few weeks ago now
    [Wednesday, October 24, 2012 10:52 PM] -- Rick Friedman says:
    HP swapped out the DVD drive and I swapped out the HDD's
    [Wednesday, October 24, 2012 10:53 PM] -- JOLLY R says:
    Please click on the start button and click on computer.
    [Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
    Reimaged, renamed, removed, rotated them to different bays.
    [Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
    ok
    [Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
    Open\
    [Wednesday, October 24, 2012 10:53 PM] -- JOLLY R says:
    Is the CD/DVD drive getting detected ?
    [Wednesday, October 24, 2012 10:54 PM] -- Rick Friedman says:
    Yes
    [Wednesday, October 24, 2012 10:54 PM] -- Rick Friedman says:
    Yes
    [Wednesday, October 24, 2012 10:55 PM] -- JOLLY R says:
    So you need te reseat the CD/DVD drive and the hard drive .
    [Wednesday, October 24, 2012 10:55 PM] -- Rick Friedman says:
    I did, over and over and over
    [Wednesday, October 24, 2012 10:55 PM] -- JOLLY R says:
    Okay
    [Wednesday, October 24, 2012 10:56 PM] -- Rick Friedman says:
    I have swapped out the dvd drive and hard drives
    [Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
    Since you have already reseated the hard drive and CD/DVD drive, you need to send the notebook in for a bench repair.
    [Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
    It will be a mail in repair service. I will send you a box along with packaging materials and a prepaid shipping label. Once you pack your notebook in the box you can drop it off at you nearest fedex drop box or you can schedule a pickup.
    [Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
    Box would contain- packaging material, shipping instructions &amp; pre-paid shipping label.
    • Once you receive the box you need to put the notebook inside the box (without any accessories), call fed-ex- (1800-463-3339).
    • Fed-ex would come at your place pick it up and send it back to hp.
    • This service will cost you $0.00
    • Standard turn around time for service is 7-9 business days.
    You can check the status of your order by going to: www.hp.com/go/csostatus or by calling HP Customer Care at 1-800-hpinvent (1-800-474-6836).
    Your repair service has an estimated turn around time of 7 to 9 business days from when we receive your product at our repair center.
    [Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
    In order to set up a service request please provide the following information:
    * Full Name:
    * Mailing Address (No P.O. Boxes):
    * Apartment/Building/Mailstop:
    * City:
    * State:
    * Zip/Postal Code:
    * E-Mail address
    * Phone Number (including area code):
    * Best time to call
    * Time zone of your region
    [Wednesday, October 24, 2012 10:57 PM] -- Rick Friedman says:
    Dont I have on-site?
    [Wednesday, October 24, 2012 10:58 PM] -- JOLLY R says:
    Let me check.
    [Wednesday, October 24, 2012 10:59 PM] -- Rick Friedman says:
    This laptop is my life, my livelyhood.
    [Wednesday, October 24, 2012 10:59 PM] -- Rick Friedman says:
    I can not be without iot...
    [Wednesday, October 24, 2012 11:00 PM] -- JOLLY R says:
    I do understand that .
    [Wednesday, October 24, 2012 11:02 PM] -- JOLLY R says:
    Yes, you do have onsite , but a technician can be sent to your place only if any part needs to be replaced .
    [Wednesday, October 24, 2012 11:02 PM] -- JOLLY R says:
    As the notebook needs to be repaired , you have to send it to the HP service center.
    [Wednesday, October 24, 2012 11:02 PM] -- Rick Friedman says:
    It is the motherboard
    [Wednesday, October 24, 2012 11:03 PM] -- Rick Friedman says:
    What is the difference between repair and replaced?
    [Wednesday, October 24, 2012 11:03 PM] -- JOLLY R says:
    It will be repaired and returned back to you .
    [Wednesday, October 24, 2012 11:04 PM] -- Rick Friedman says:
    But what is there to be repaired if your not replacing anything?
    [Wednesday, October 24, 2012 11:04 PM] -- JOLLY R says:
    If any hardware part needs to be replaced , a technician can be sent to your place .
    [Wednesday, October 24, 2012 11:04 PM] -- JOLLY R says:
    But since the notebook needs to be repaired ,you have to send it .
    [Wednesday, October 24, 2012 11:05 PM] -- Rick Friedman says:
    What is the difference between repaired and replacing something... So you mean that nothing will be repaired on my laptop?
    [Wednesday, October 24, 2012 11:06 PM] -- Rick Friedman says:
    This is NOT right
    [Wednesday, October 24, 2012 11:06 PM] -- JOLLY R says:
    I mentioned earlier that you need to send the notebook for repair.
    [Wednesday, October 24, 2012 11:06 PM] -- Rick Friedman says:
    I would like to talk to someone about this.
    [Wednesday, October 24, 2012 11:06 PM] -- JOLLY R says:
    It will be repaired and returned back to you .
    [Wednesday, October 24, 2012 11:07 PM] -- Rick Friedman says:
    What is the turn around time on this?
    [Wednesday, October 24, 2012 11:07 PM] -- JOLLY R says:
    It is 7 to 9 business days.
    [Wednesday, October 24, 2012 11:08 PM] -- Rick Friedman says:
    NO WAYYYY!
    [Wednesday, October 24, 2012 11:08 PM] -- JOLLY R says:
    If you want to talk to someone , you need to call our voice support in the direct number 1-800-474-68386 and refer to serviceticket number - {Private Information Removed}.
    [Wednesday, October 24, 2012 11:08 PM] -- Rick Friedman says:
    OK, thx
    [Wednesday, October 24, 2012 11:08 PM] -- JOLLY R says:
    We also have an expedite shipment, where the turn around time is 4 to 6 business days .
    [Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
    Please take down the service ticket number {Private Information Removed} and SR ID {Private Information Removed} for future reference.
    [Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
    You are welcome.
    [Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
    Is there anything else apart from this I can help you with now ?
    [Wednesday, October 24, 2012 11:09 PM] -- Rick Friedman says:
    No
    [Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
    Thank you

  • USB external hard drive and thumb drive don't work any more...

    I have a dual 2GHz PowerPC G5...and i've been using my USB external hard drive and thumb drives for a year with no problems....but now when i plug them in, my mac does not see them...the lights on the external hard drive and thumb drives come on as normal but nothing else...it does this on all the USB ports(front and back) BUT my iPod, keyboard and mouse, and HP printer (that use the same USB ports) works fine....(also i'm running Mac OS X 10.5.2)....help....

    You can't transfer songs from iPod to computer using iTunes, except for songs that you purchased from the iTunes Store (you can also re-download them using the iTunes Store Purchased screen).  However, there are third-party methods and utilities that can transfer song files from iPod to computer.  If you do a Google search on something like "ipod transfer," you should get some links.
    Once the song files are on your computer, drag the files (or the folder containing the files) to the iTunes window, to add them to the iTunes library.

  • I can't import any photos. 'Could not copy to requested location' is the given but i have tried importing to both hard drive and external drive.

    i can't import any photos. 'Could not copy to requested location' is the given but i have tried importing to both hard drive and external drive. Help please ?

    Most likely, the "requested location" where you are trying to copy files to does not have WRITE permission, and so you need to change the permissions.

  • My External Hard Drive and Pen Drives doesn't show up in desktop but shows in finder.

    Hi, I've been wondering why my Pen Drives and Hard Drives won't show up in desktop when I plug it in.
    Its showing up in finder but I cant seem to solve this problem. help!

    No problem. 
    (1) Click on the Finder icon in the Dock.  If your dock is on the bottom of the screen, it is the icon on the far left.
    (2) Now, look at the menu called Finder at the top left of your screen and find "Preferences there". Or, you can just press command-,  (command-comma).
    (3) Anyway, once the Preference window opens select the category "General" from the choices there.  You will see a list of things which you can choose to have displayed on the Desktop.  Make your selections and close the window.
    charlie

  • TS1574 The video and sound was working on my computer two days ago (and has ALWAYS worked on my computer since purchasing it in 2010) but now for some reason I can't play video and there is no sound.  I updated software today.  Still sound & video not wor

    The video and sound was working on my computer two days ago (and has ALWAYS worked on my computer since purchasing it in 2010) but now for some reason I can't play video and there is no sound.  I updated software today.  Still sound & video not working.
    Please help.

    One of the following steps should help.
    1. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:
        Click in the box for "Enable Plug-ins".
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box for
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes next to all items.
        Check the box next to "Remove all website data".
        Click "Reset".
    5. Turn off Extensions/Plug-ins if any that may interfere with Flash working properly.
        Safari > Preferences > Extensions
    Best.

  • Time capsule drive and external drive won't wake up

    I have a time capsule purchased in August (2TB) and a 2 TB WD MyBook external drive plugged into the usb slot on the time capsule. Given my computer is a laptop, it is nice to be able to put the external drive somewhere where it doesn't have to be plugged and unplugged with laptop use. The WD external drive houses my itunes library and is pretty sensitive and loses data whenever not powered down cleanly.
    The problem:
    Time Capsule drive and WD drive seem to go away and not allow me to access them no matter what I try. The only way to get them responding is to pull the power plug on the time capsule and power back on. This needs to occur each time I want to access either drive. When attempting to connect via finder I get connection failed errors.
    I have no connectivity problems with airport. Access to network is fine, so I know the TC is not totally dead, just the part that lets me access the hard drives. It is interesting that time machine appears to be able to access the drive on the tc without problem but I'm not sure how confident I am that this is true just because it is telling me so.
    Any suggestions? anyone else seeing this?

    I am having this issue as well.
    The behavior seems to be that the drives are available after a reboot and for some time afterwards. Then at some indeterminate time, the drives become unavailable. The Time Machine backups stop with a "Backup Delayed" message and I have to go to the Time Capsule and reboot it by removing the power and re-inserting it.
    When the drives are unavailable, the wireless router functions are still active since I use this router as my gateway to the internet.

  • We are using CS 5.5. If I update to OS 10.9 can I download the latest version of Adobe Drive and have it work with CS 5.5?

    We are using CS 5.5. If I update to OS 10.9 can I download the latest version of Adobe Drive and have it work with CS 5.5?

    For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/
    Or you can revert to 3.6.16. <br />
    http://www.mozilla.com/en-US/firefox/all-older.html

  • I think the DVD player reader on my Mac is going bad. Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive?

    I think the DVD player reader on my Mac is going bad. Until I get it fixed Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive? It's ILife 11 if that makes a difference. Finder won't let me see the files to copy. I know - dumb question.
    Thanks.
    Bob

    Adding an SSD is not a simple endeavour like adding additional memory or adding another hard drive to a Mac Pro. That's probably why the option is only offered as an option at the time of purchase. Even if your Apple store was willing to install the necessary parts you will probably be paying for 1-2 hours of labor plus the cost of purchasing the necessary service parts (SSD, bracket, cables, etc) which I suspect will make the upgrade cost much higher than what it costs to add the SSD option when purchasing a new system.
    I use my system for business and need it to work reliably.  Even though I'm fairly handy with tools I would not be willing to risk damaging my system and voiding my warranty by opening my system and removing the logic board and several other parts in order to squeeze in an SSD option and attach the appropriate cables and brackets. I'm also not prepared to deal with the hassles of explaining why my system has unauthorized parts installed in the event I experience issues and need to make use of my Apple warranty. My time is valuable, so I would probably investigate external storage options, or if I needed the speed of an SSD, I would consider selling my existing system and then purchase a new system configured with an SSD.
    If you haven't already done so I suggest doing a search on 'iMac SSD installation' to see what's involved. It might help you understand why the SSD option is not offered post purchase.

  • Cd drive and dvd drive~~~~help

    i have install the software that come with the ipod
    after i reboot the pc,
    my cd drive and dvd drive are disappear in my computer
    what can i do, to get my cd drive and dvd drive back?
      Windows XP  

    Happens, its a commonly documented error with Windows and alot of burning software installed on one machine.
    Your going to have to work thru this article to resolve it. Now it is going to be in the registry to fix it. Which is pretty indepth. The document works tho. Used to work for a company that wrote burning software and we did this on a hourly basis. If your not comfortable, your going to need to find someone who is experenced in the registry.

  • Why can't I print from my 4s to my HP envy. I used to work and it still works from my air book?

    why can't I print from my 4s to my HP envy. I used to work and it still works from my air book?

    Morning thomas b olsen
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    http://support.apple.com/kb/ht4356
    How to print in iOS
    You can print from the Apple applications, such as Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, Filemaker Go, and so on. Apps available from the App Store may also offer this feature.
    To print, follow these steps:
    Tap the action icon .
    Tap the Print button.
    Select the appropriate settings, and then tap Print.
    Important: If you are printing for the first time, or if the previously selected printer is not available, you will need to select a printer before step 3.
    Note: AirPrint displays only the essential printer options that apply to the document or image being printed. Details such as media type, page size, and orientation are automatically determined at print time.
    Hope this helps,
    Mario

  • Re: Satellite L300-1A8 - SATA and sound driver

    I had to change SATA from AHCI to compatible, because I wanted to install Windows XP on my L300. Is there any way to install SATA driver under existing OS?
    And one more problem. I cannot install the sound driver.
    Installation passes ok, but after restarting there is no sound or even installed sound card in device manager, and there is still by the PCI device.
    Need help as soon as possible

    > {quote:title=SoGood wrote:}{quote}well, first, I have tried to install WXP SP3 with integrated SATA drivers,but I got the blue screen after loading of drivers...I didn't pressed F6, mabe that was a problem...
    Yes, that was the problem.
    If you install Windows XP and you hade set the SATA mode to AHCI, you must press F6 to load the drivers.
    Download the drivers and copy it on an external FDD.
    But there is an other option. You can use nLite: http://www.nliteos.com
    nLite is a tool for pre-installationd Windows configuration an component removal at your choice. You can also integrate the SATA drivers, Service Packs, etc. So must not press F6 and not use an external FDD.
    By the way, it's normal when your laptop is a little bit slower, because the SATA drivers are missing.

Maybe you are looking for

  • How to give heading in main screen in big font

    Hi to all My requirement is  : I want to give heading of the module pool application    ex: Car Approval Maintenance Application in big font. How is it possible. I am taking text field for that . Thanks & Regards Anubhav

  • Which Is True for 24/7 Sleep? Hard Drive Could Fail Because It's Constantly Spinning or Because It's Suddenly Switched ON

    Hi. It's sleep vs. shutdown again. I read some computer components are better off on sleep mode, some components are better off shutted down. If each component lasts longer in sleep mode and some shutted down, what then is the best for Macs as a whol

  • Export Filter - processing in batches

    I'm writing an export filter that uses an external tool to process the photos. The tool can/should be multithreaded and I want to take advantage of this by processing the images in groups of 2 or 4 or 8 (or whatever). This means that I gather the pat

  • ITunes 8.1 killed the store

    Ever since upgrading to 8.1, I can no longer connect to the store. When I click on the iTunes store in the side bar, I get the "accessing iTunes store" progress bar then it fails with an unknown error (504) message. However, I can log in, authorize/d

  • Background colour displaying above graphics layer?

    Hi, I have a canvas, I've set the background colour to blue, and on creation complete am drawing a rectangle using canvas.graphics. However this displays behind the background colour? Is this correct? I can only see it if I reduce the background alph