G530-444638U Sleep/Hibernate issue with windows7 Ultimate 64Bit with 4GB ram
I have a problem with Lenovo G530-444638U. I upgraded to 4Gb ram and installed a fresh copy of Windows 7 Ultimate 64bit and I’m facing sleep and hibernation problems. When I try to put laptop to sleep mode and I try to resume from sleep, it restarts by itself. I tried every single option in my power management and every command leads to restart. I also have the same problem with hibernate mode. When I try to resume from hibernate, it restarts and I have option on the screen to delete restoration data in order to continue,
Reading on Lenovo forums and Google search, it looks like it is a known issue. I have the latest graphic and WAN drivers from Intel for win 7 and still I can’t solve issue. Is anyone has same model and expediting this problem, any help would be appreciated.
When I downgraded my ram form 4gb to 3gb then sleep and hibernate works fine. i installed vista ultimate 64bit and had same sleep/hibernate issue. I called lenovo tech support and they told me to call software support, which is provided by third part and it is not free, i don't think it is software issue. I tried diffrent ram and had same issue.
T6500(2.10GHz), 4GB ram 16HTF25664HY-667E1, BIOS Version 6GET19WW(for NON-HDMI), Lenovo Energy Management 4.4.1.1 2009-10-22 7.67 MB Windows 7 64bit
also one more issue i had... is when i try to boot up... somtimes it will go into a loop for a couple times. it will try to load windows(no blue screen)-->reboot--> and ask me if i want to use system recovery/start windows normally.
any help will be greatly appreciated.
Thanks very much.
Similar Messages
-
When I change the size of Firefox3.6.12 with 'Snap' ,Firefox freezes . I'm using the PC on Windows7 ultimate 64bit .
The most likely cause that your non-standard user agent that has ''Fedora/3.6.10-1.fc13'' is causing it:
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.10) Gecko/20100920 Fedora/3.6.10-1.fc13 Firefox/3.6.10 GTB7.1
* [[Web sites or add-ons incorrectly report incompatible browser]]
* http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
A standard UA of Firefox 3.6.13 on Linux looks like:
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13 -
ok, so i bought a imac 27 about 4 months ago, and now they release a new one! ****... So my question is, should I sell this one (which by the way is the i5 2.8 with 1 gb 5750 and 4gb ram) and buy the new imac 27 i5,or keep the one i have and buy more ram. I mostly use my computer for photoshop cs5 and illustrator cs5 for graphics out put as well as surfing the web and music.
Please give me you thoughts on what I should do!! Thanks lot!The new iMac is about 25% or so faster than your current iMac(comparable model would be the 3.1ghz version). There are a couple of things that you will benefit from such as the dual Thunderbolt/Mini Display ports/ which may help with multitasking. The video card in the new iMac again the comparable model being the 3.1ghz is a lotttttttt better than the current one that you have. So thinking of the long run those few things may be beneficial for you to upgrade(but it depends on what is important to you).
I had the 2.93ghz i7 version that I just bought in March this year and I turned around and sold it about a week before the new iMac's were announced. I got about $1600 for it, yeah I took a loss but to me it was worth it because my new iMac performs that much better. Now keep in mind I went from i7 to i7...3.4ghz i7 with the 2gb video card. Now I have dual thuderbolt/mini display ports. I have noticed significant gains in my video editing and also in my gaming. So to me it was definitely worth the upgrade!
One last thing, I would not have sold my 2.93 i7 and then bought the 3.1ghz i5, the big reason is because HT(hyper threading), it's only on the i7 model(3.4ghz)... If you take a look at some of the bench marks on engadget, maclife, macrumors, macworld, ****Barefeats.com(they really get into benchmarking)*** you will see charts that will help you make a better decision.
In closing I would say look into it, if you can get a good price out of your current iMac to put toward a new iMac then do it. Like others have mentioned to you, tech changes and Apple will change the tech in these machines next year or do a speed bump later this year or so. One last thing if you go from the 2.8 i5 up to the 3.4 i7, you would definitely see the difference (HT is a must especially for programs that utilize it. You can go to my youtube channel(mob1278) and take a look at my geekbench results.... my 2.93 i7 scored around 10500-11000(8gb ram)...my 3.4 i7 scores from 12700-13000 with 4gb ram....so yeah as you can see big difference. Basically the 3.4 i7 would perform similar or just under a 2.4ghz 8core 2010 Mac Pro which runs you about $3500 with no monitor.... it's your money spend it how you want....and Lion is only going to push it even more when it is released! -
Is new mac book air with 1.3 ghz and 4gb ram good enough for ios app development
Hello all,
I am thinking of purchsaing mac book air 13" with 1.3 ghz and 4gb ram.
currenlty i am using mac mini.Can any one help me if new mac book air with 1.3 ghz and 4gb ram good enough for ios app development to make it as my prmary machine for development.
Ragards.A Macbook Pro 13-inch may be a better choice.
Best. -
The following problem occurred with Power Manager 3.29 installed, on both Windows XP and 7.
To reproduce:
1. Put my T400 to sleep/hibernate
2. Wake it up by pressing power button
3. It falls to sleep/hibernate again
4. Repeat step 2, and everything is fine
To sum up, it sleep/hibernate again as it's waken up the first time.
With PM uninstalled, the problem goes. So I think this may relate to the driver. Anyone can help me?Report this issue to Cleo_Lenovo or Mark_Lenovo. Or just contact any moderator.
Best regards.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem -
I recently saw that for os x server apple says that you can run it on inexpensive hardware like mac pro, imac and mac mini. It doesn't say anything about notebooks. So if i buy os x server will i be able to run it on my macbook pro mid 2012 with i5 2.5 GH, 4 Gb RAM and 10.8.4?
Thanks.Welcome to Apple Support Communities
OS X Server is compatible with any Mac that runs OS X Mountain Lion, so you can install it on any MacBook, MacBook Pro, MacBook Air, iMac, Mac mini or Mac Pro that supports Mountain Lion > http://www.apple.com/osx/specs
Just open the App Store and purchase OS X Server. The app will appear after finishing the download, so follow its steps to set up OS X Server on your computer. You will be able to install it for free in all your computers after purchasing it. If you want more information about OS X Server, read > http://www.apple.com/osx/server/ -
File Sharing in iTunes doesn't work on W7 Ultimate 64bit with IPAD
I have Numbers Pages and Keynote on my IPAD
If I connect to my PC via USB and go straight to the application tab in Itunes and click one of the apps on the Fileshareing window I can see my files bit just after the sync completes they all disapear !!!!
Why is this ??
Note I deinstalled and reinstalled Itunes several time and this doess not fix the problem
Windows is fully patched and the IPAD is running the latest available swareI have same problem too. At the first, even after JB, it's OK! once I install some ebook software.... problem happen, now even JB or not, and I already install uninstall itunes several times, reset ipad serveral times and upgrade to 3.22.......
Now the situation is only allow one software on file sharing content, it will show all the file in that software and can be add or delete. Once I add one more software even movie player, quickoffice or cloudreader..... all problem in the file sharing contents but cannot see the doc now and cannot add and delete......
I Need help! -
I am running Snow Leopard 10.6.8 on an iMac 7,1 system with 2.4GHz processor and 4Gb RAM. I also use Microsoft Office for Mac.
I am wondering whether i should upgrade to Yosemite or first go to Mountain Lion or Maverics to avoid sluggishness and other potential issues with using Yosemite on this iMac.i had thought Snow Leopard was no longer supported hence my idea to upgrade.
It isn't being supported any longer.
If you haven't done this you might want to consider doing it for security.
NTP fix for Snow Leopard: https://drive.google.com/folderview?id=0BxQCbeIgpA2uVjFiN1h4bGZNQ2c&usp=sharing
Firefox -
PDF Printer not working with Acrobat 8 & Vista Ultimate 64bit
I have not been able to print pdf's. I am uptodate on upgrades and have installed, reinstalled printers and repaired the program etc.
When I install an adobe printer I get the Adobe PDF Converter. When I try to print with it, I get an audible failure signal and nothing ever happens. Sometmes I get a sceen indicating it has failed, sometimes not. I have had this problem since upgrading to a new computer with Vista Ultimate 64bit OS.
I have seen various "Fixes" but none seem to address my problem or work for it.
Anyone with the same problem and perhaps a solution?What version of AA8?
-
Anyone having issues with MacBook Pro2,2 with sleep and Mountain Lion?
Since installing Mountain Lion on my MacBook Pro (2,2, June 2007), I am unable to put my machine to sleep. I close cover and the fan keeps running.
Anybody have any ideas how to fix this?Scroll through this board to see the varied problems with ML, I don't think Apple even bothered to test Logic with ML, many problems with interface freeze/lag, also some problems with audio stuttering. Don't know how much longer Snow Leopard will be supported but I'm staying there as long as possible. Sorry I don't have better news.
-
RAM ISSUES A215-S7407 - PSAFGU-01V002 SUSPEND MODE ERROR WITH 4GB RAM
Hi, im having some troubles with my laptop.
Because it comes only winth 1GB RAM (512MB x 2) i decided to give it an upgrade to 4GB (Max Capcity) according to specifications details on the support site. So i bought two (2) DIMM Modules KINGSTON 2GB 667MHZ, exact model # KVR667D2S5/2G Everything was working fine until i close the lid and it suspend.
Normally, when i open the lid, it will wake up, and everything will work fine, BUT NOW when it wakes up i have distorted sound and horizontal lines on screen, and sometimes i get a BSOD (BLUE SCREEN OF DEATH) and it restart itself.
TEST THAT I MADE:
ONLY 1 DIMM of 2GB - IT SUSPEND AND WAKES UP NORMALLY (I tested both Dimms 2GB separately)
1 DIMM 2GB / 1 DIMM 1GB (TOTAL 3GB) - IT SUSPEND AND WAKES UP NORMALLY
2 DIMMs 2GB (TOTAL 4GB) - IT SUSPEND AND WAKES UP WITH DISTORTED SOUND AND HORIZONTAL LINES ON DISPLAY.
It seems like the problem appears only with Max. Capacity (4GB) RAM and only when it suspend CLOSE THE LID (POWER LED CHANGE COLOR BLUE TO ORANGE AND FADES AND COMES).
With Hibernation, it works fine, the problem is when it suspend.
It looks that the problem is on the motherboard, maybe a NEW BIOS RELEASE that fix the situation.
I appreciate if somebody can speak to TOSHIBA SUPPORT DEVELOPER and ask them for an BIOS Update.
i know that im not the only one with this problem, there is another person that wrote a post "RAM ISSUES" and refers to the same situation, but as i guess, it wasn't solved at all.Make sure you install the memory when the light is not flashing, i.e. completly off not sleeping.
What if you try adjusting - MSCONFIG/Advanced Options/Maximum Memory
This signature left intentionally blank. -
I would love some help with this issue. I have configured my SharePoint foundation 2010 site to use Claims Based Auth with Certificate authentication method with ADFS 2.0 I have a test account set up with lab.acme.com to use the ACS.
When I log into my site using Windows Auth, everything is great. However when I log in and select my ACS token issuer, I get sent, to the logon page of the ADFS, after selected the ADFS method. My browser prompt me which Certificate identity I want
to use to log in and after 3-5 second
and return me the logon page with error message “Authentication failed”
I base my setup on the technet article
http://blogs.technet.com/b/speschka/archive/2010/07/30/configuring-sharepoint-2010-and-adfs-v2-end-to-end.aspx
I validated than all my certificate are valid and able to retrieve the crl
I got in eventlog id 300
The Federation Service failed to issue a token as a result of an error during processing of the WS-Trust request.
Request type: http://schemas.xmlsoap.org/ws/2005/02/trust/RST/Issue
Additional Data
Exception details:
Microsoft.IdentityModel.SecurityTokenService.FailedAuthenticationException: MSIS3019: Authentication failed. ---> System.IdentityModel.Tokens.SecurityTokenValidationException:
ID4070: The X.509 certificate 'CN=Me, OU=People, O=Acme., C=COM' chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed
correctly, but one of the CA certificates is not trusted by the policy provider.
at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
--- End of inner exception stack trace ---
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.BeginGetScope(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.BeginIssue(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.DispatchRequestAsyncResult..ctor(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginDispatchRequest(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.ProcessCoreAsyncResult..ctor(WSTrustServiceContract contract, DispatchContext dispatchContext, MessageVersion messageVersion, WSTrustResponseSerializer responseSerializer, WSTrustSerializationContext
serializationContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginProcessCore(Message requestMessage, WSTrustRequestSerializer requestSerializer, WSTrustResponseSerializer responseSerializer, String requestAction, String responseAction, String
trustNamespace, AsyncCallback callback, Object state)
System.IdentityModel.Tokens.SecurityTokenValidationException: ID4070: The X.509 certificate 'CN=Me, OU=People, O=acme., C=com' chain building
failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
thx
Stef71This is perfectly correct on my case I was not adding the root properly you must add the CA and the ADFS as well, which is twice you can see below my results.
on my case was :
PS C:\Users\administrator.domain> $root = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
cer\SP2K10\ad0001.cer")
PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "domain.ad0001" -Certificate $root
Certificate : [Subject]
CN=domain.AD0001CA, DC=domain, DC=com
[Issuer]
CN=domain.AD0001CA, DC=portal, DC=com
[Serial Number]
blablabla
[Not Before]
22/07/2014 11:32:05
[Not After]
22/07/2024 11:42:00
[Thumbprint]
blablabla
Name : domain.ad0001
TypeName : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
DisplayName : domain.ad0001
Id : blablabla
Status : Online
Parent : SPTrustedRootAuthorityManager
Version : 17164
Properties : {}
Farm : SPFarm Name=SharePoint_Config
UpgradedPersistedProperties : {}
PS C:\Users\administrator.domain> $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
cer\SP2K10\ADFS_Signing.cer")
PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "Token Signing Cert" -Certificate $cert
Certificate : [Subject]
CN=ADFS Signing - adfs.domain
[Issuer]
CN=ADFS Signing - adfs.domain
[Serial Number]
blablabla
[Not Before]
23/07/2014 07:14:03
[Not After]
23/07/2015 07:14:03
[Thumbprint]
blablabla
Name : Token Signing Cert
TypeName : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
DisplayName : Token Signing Cert
Id : blablabla
Status : Online
Parent : SPTrustedRootAuthorityManager
Version : 17184
Properties : {}
Farm : SPFarm Name=SharePoint_Config
UpgradedPersistedProperties : {}
PS C:\Users\administrator.PORTAL> -
Issue with Calendar not syncing with iPhone 3g
Issue with Calendar not syncing with iPhone 3g.
Solution
Create backup of your entire mailbox before starting (THIS IS IMPORTANT)
Create offline folder (.pst file) Check windows help on how to do this for your version.
Open folders view on Outlook
Right click on Calendar in tree view and 'copy to' offline .pst folder
Go back to main calendar view and delete all entries in your calendar.
Create simple cal entry and sync test with iphone
If this works then start dragging cal entries back from the offline folder into the main calendar then sync after each step....
I moved events in this order
-Yearly recurrences (ie Birthdays)
- Monthly recurrences
- weekly recurrences
- Daily recurrences
All appointments from the beginning of this year >> to the end of time!
If all these sync then the issue is with an older cal item and you have to decide if you actually need these in you current calendar.
I chose to leave these in the offline cal and if i need access them from there.
If at any point the sync fails then you know you have a corrupt cal entry in the block you just transferred. Move the offending items back into the offline folder and try again in smaller chunks until you identify the offending items and delete them and manually recreate them in your real calendar.
Also smart to run the inbox (.pst /.ost ) repair tools for your OS/Outlook version.
Fixed so far
XP Pro / Outlook 2008
XP Pro /Outlook 2003I just updated the firmware to iPhone 2.0.1 and the syncing works great both ways.
-
Compatible issues firefox v37.0.2 with att yahoo mail
6:43 PM 4/24/2015
Compatible issues firefox v37.0.2 with att yahoo mail
Hello: this is my first post,hope I am doing it properly.
I am using W7pro OS and ATT DSL 3.0Mbps dl
I noticed this week that I was unable to save attachments from my ATT Yahoo mail I could view them but no choice as to ware to save them--only choice (save to my comp.)But no ware to be found.
I reinstalled v 36.0.4-preventing auto upgrade-But still had same problem.
At this point contacted ATT support supervisor-we spent about 4hr working on problem--He was using your v 31.5.0--and had no problem accessing and saving attachments using remolt access on my comp.
We also found using my comp.FF v 36.0.4 & v 37.0.2 browser,that we could without any problems access an save attachments--AOL mail-- & mail2web.--& IE--Even when forwarding inaccessible mail to above sites.
He informed me that (ATT mail Yahoo)only uses resources to make them compatible with--Google IE & Chrome &Apple? (basically he was saying,that they would NOT commit resources to FF--any version)BUT he was not allowed to commit.
PS: The last time I know it worked ok was 3-18-15 I have 3 comp.2 wxp pro 1 w7 pro the same problem on all 3--so feel confident not OS related-but compatible problems with FF & yahoo mail.
The ATT support supervisor-was unable to determined the date they may have made changes on their site.without extensive research-which we decided wasn't worth the effort as they wouldn't look in to it.
I hope someone or FF will be able find a workaround-as I do not want to use the browsers they suggest. I LOVE FF.
Thank You GaryI have no idea what you are asking me to do ??--can you explain at a dummy
level--I wont be offended.
gary -
Sleep and hibernation is working on Server 2012 with started hypervisor! I do not know why...
Hi,
I enabled Hyper-V role in the Microsoft Windows Server 2012 on testing computer (PC with i7 CPU and 16GB RAM). I found very strange behavior. The sleep mode was enabled and after command “powercfg /hibernation on” the hibernation is also working.
I tested sleep (S3) and hibernation with started hypervisor and with running virtual machine. I tested sleep and hibernation triggered by power button and even with time-out that was set in the Power Options (I set sleep after 1 minute and
later hibernate after 1 minute and wait).
Sleep and hibernation is working! I do not understand why. Sleep and hibernation should be functional only on Client Hyper-V on Windows 8 and not on the Server 2012.
Some examples:
Testing workstation (i7, 16GB RAM) with Server 2012 and with started hypervisor:
C:\Users\Administrator>powercfg /a
The following sleep states are available on this system:
Standby (S3)
Hibernate
Fast Startup
The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.
Standby (S2)
The system firmware does not support this standby state.
Standby (Connected)
The hypervisor does not support this standby state.
The system firmware does not support this standby state.
Hybrid Sleep
The hypervisor does not support this standby state.
My laptop (i5, 8GB RAM) with Server 2012 and with started hypervisor:
>powercfg /a
The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.
An internal system component has disabled this standby state.
Hypervisor
Standby (S2)
The system firmware does not support this standby state.
An internal system component has disabled this standby state.
Hypervisor
Standby (S3)
An internal system component has disabled this standby state.
Hypervisor
Hibernate
An internal system component has disabled hibernation.
Hypervisor
Standby (Connected)
The hypervisor does not support this standby state.
The system firmware does not support this standby state.
Hybrid Sleep
Standby (S3) is not available.
Hibernation is not available.
The hypervisor does not support this standby state.
Fast Startup
Hibernation is not available.
R. Revil
Relef RevilHi Ben,
I have nearly exactly the same Problem as Relef Revil.
I have Lenovo T510 Notebook with Core I7 and a Lenovo T420 Notebook with a CoreI5.
On my T510 S3 Sleep works perfectly with Hyper-V Role. On my T420 Sleep is disabled due to Hypervisor.
If I uninstall Hyper-V Role then Sleep works again as expected.
So, from a Little simple perspective, I Looks like this is a Hyper-V Thing or Problem.
I have als updated to the latest BIOS and latest Intel HD Graphics 3000 Drivers on this Win 2012R2 Maschine.
Also I have installed all possbile latest Versions of all other devices.
Could you probably give me an idea where to search for a solution.
So, what is the logic why Hyper-V disables sleep, when Sleep worked before?
I assumed that Hyper-V and Sleep ist generally possible on Win2012R2, especially when Sleep works perfectly when Hyper-V Role is not installed.
Kind Regards
Marcus
C:\Users\Marcus.Koenig>powercfg /a
The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.
An internal system component has disabled this standby state.
Hypervisor
Standby (S2)
The system firmware does not support this standby state.
An internal system component has disabled this standby state.
Hypervisor
Standby (S3)
An internal system component has disabled this standby state.
Hypervisor
Hibernate
An internal system component has disabled hibernation.
Hypervisor
Standby (Connected)
The hypervisor does not support this standby state.
The system firmware does not support this standby state.
Hybrid Sleep
Standby (S3) is not available.
Hibernation is not available.
The hypervisor does not support this standby state.
Fast Startup
Hibernation is not available.
C:\Users\Marcus.Koenig>
Maybe you are looking for
-
Lightroom Workflow & Avoiding Photoshop
There are still basic colour adjustments that I'm performing in Photoshop for which I suspect Lightroom would be able to handle just as well. But I'm still too addicted to Adjustment Layers to see an efficient way of accomplishing the same thing. For
-
Adobe apps freeze when opening help file
When I click help in the help menu, the PDF opens right away, but then Premiere freezes for about 40 seconds. I suspect it is trying to download some Internet content, but this behavior needs to be fixed. My Mac Pro is connected to an AirPort Extreme
-
Process order creation with out BOM
Hi I have an requirement... material A is finished good i create process order for material A but i dont use BOM... with out BOM can i create process order . after creating process order cani isuue components against order ? is it possible please ca
-
Verity cfsearch returns "collection does not exist" error - when collection does exist
I have created a collection using the Coldfusion Administrator - and it shows up fine when displaying all the collections. I also populated the collection using the <cfindex> function - using a SQL query - and that appeared to work fine. It put 117 e
-
Is there a setting I have incorrect?