G5345uk cannot update drivers

tried to update drivers graphic driver says cannot continue 259
This question was solved.
View Solution.

Open the Start Menu, click on All Programs and Accessories, right click on Command Prompt, and click on Run as administrator.
Type sfc/scannow
It may take a while while it tries to correct corrupt system files.
Download the driver from this site and try to install:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-102440-1&cc=us&dlc=en&lc=en...
If no go try this driver:
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22166
If still no go, you will have to perform a Factory Restore, back up your data before proceeding.
Repeatedly tap the F11 key at boot to enter the recovery manager or use recovery disks hopefully you created when you got the computer.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Similar Messages

Cannot update drivers error code 193 on All in one 8500 Win 8.1

Running Win 8.1 updated from 7.. All in One 8500 910A Can do basic printing but no longer have twain support for scanning etc. When trying to update get failure notice error number 193. HP message says they have no further advice

Hi @clamproad ,
I see that you no longer can scan after updating to Windows 8.1. When you try to update, you are getting a failure notice error number 193. I would like to help you resolve this issue.
Did you fully uninstall the old HP Software and try downloading the newest software?
Here are the Full Feature Software Drivers if you haven't installed them.
HP Officejet Pro 8500A e-All-in-One Printer - A910a Drivers.
Select your operating system, click next and click on the software to download and install.
Here is a document on this issue. After Upgrading the Computer to Windows 8.1, the HP Printer Does Not Print and the Printer Software ...
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My canon p-150m scanner gives the error message "cannot load drivers" ever since updating to yosemite

why does my canon p-150m scanner gives the error message "cannot load drivers" ever since updating to Yosemite ? I have had 2 reload the driver 2x - but each new time I start I keep getting the same error message .

Try resetting the printing system.
OS X Mavericks: Reset the printing system

Cannot update nvidia drivers after installing bootcamp drivers

Hi everyone,
I'm sorry to start again a topic that in my view has been treated many times, in many forums but HAS NOT been solved so far...I looked over many forums over the week end and tried a number of "tricks"
I'm running Windows 7 Pro Sp1 32bits on a MacbookPro 17 - intel core duo with two graphic cards but for better performance running the Nvidia GeForce 9600m GT
I have installed Windows 7 this week and then Bootcamp 4.0 - thus i have now Bootcamp drivers, ie 261.41
I have installed Battlefield 3 which asked me to update drivers to at least 285.27
I downloaded them from Nvidia site 285.27 AND 285.38 (m version - notebook) but when i start the indatllation i get the message "hardware not comptatible"
So far i have tried 1) to install non-beta older versions but higher than 261.41 (which is by the way only available on bootcamp) - it does not work 2) uninstall nvidia drivers, restarting windows with VGA driver and install newest nvidia drivers - it does not work;
What i have not tried (as it was not clear on other forum): 1) replace an INF file? - i did not understand what i have to do here 2) update other drivers? mobility? ATA? - i'm not sure what people were talking about here?
SORRY MY MESSAGE IS LONG BUT I REALLY NEED YOUR HELP - and want to play battlefield 3 that i pre bought by the way... ;-)

Hi,
I make this post as I found a way to solve my issue and this could be interesting to other people:
1. Download the latest nvidia drivers (285.38) on nvidia website: http://www.nvidia.com/Download/index.aspx?
2. Launch the .exe it will unpack the package in one folder: most likely NVIDIA/DisplayDriver/285.38/WinVista_Win7/International
3. Your installation will be cancelled through "hardware not compatible" - no worries you still have the unpacked stuff.
4. Go to http://laptopvideo2go.com/drivers/win7x32/285.38/disclaimer and click on "Click here to download the modified INF file." on the bottom - this will download a file called nvwi.inf - copy it
5. Go to the unpacked folder and go to the folder named Display.Driver - paste the nvwi.inf - it will replace the actual one
6. On the root folder (International) click on setup and you will be allowed to install the drivers - note that i have accepted during installation two times that it install drivers not "allowed by windows" (different topic)
Hope this helps.

Cannot update printer driver on client computers

Hi all,
we are migrating users and computers from one domain (DomainA) to another one (DomainB). All was working fine: bidirectional trusts is created, all users and computer are migrated but the printer server still exists in DomainA and is being used. All
45 printers are Canon models: Canon IR2525i and Canon IRC2030i. Also, Domain A print server is the last DC at domainA and is running Windows 2008 R2. Domain B DCs are running Windows 2003 SP2
All users could print ... but yesterday a workmate tried to install a new printer (Canon iR ADV C2230), so he decided to install its driver. After that, all Windows 7 users were unable to print (there are some XP computer but they can print) because all
Canon printers show a 'Driver update needed' message with privilege prompt, but users cannot update because they're non-admin users.
We're using GPO & GPP for printer deployment. I've tried to use 'Point and print restrictions' as I could read at http://technet.microsoft.com/en-us/library/cc753269.aspx. First I disabled Point and print restrictions... the same result. After that,
I tried to enable it and set as trusted server the DomainA print server and not showing warning or elevation prompt when connecting or updating driver... same result.
Also, I tried to set GPO policy for user permission 'Devices: prevent users from installing printer drivers' to Disabled. and using GPP adding a common group for migrated users to local advanced users group.... same result.
The last attempt was, using GPP printer deployment, set 'Replace' instead of 'Update' a printer, but after GPUPDATE /FORCE I can see the modified printer dissapears, but not returns. At event viewer I can see 0x80070bcb error : The specified printer driver
was not found in the sistem and needs to be downloaded
Any idea what else can I do? If I set admin user at privilege prompt drivers are installed succesfully, but is not a solutions because there is a lot of clients :(
Thanks in advanced

Hi SalvaG,
Thanks for sharing your solution in the forum. We really appreciate your time and efforts.
Best regards,
Justin Gu

Solaris 10 won't boot up "Cannot load drivers for /pci@400.....

This is the error message that I am getting on a Solaris 10 sparc server
scsi: no major number
cannot load drivers for /pci@400.....
Can't load the root filesystem
Type 'go' to resume
{0} ok
Is there a way for me to correct this issue. It looks like I am missing a scsi driver to boot up the server? Is there a way to boot into single user mode, mount the filesystem and rediscover the hardware, etc.....

First i guess you have to verify that you can find the disks with a probe-scsi-all
next you can boot it of a CD-rom/dvd into single-user:
boot cdrom -s
.. or similar into single-user from a jumpstart image:
boot net -s
Then you can mount the root disk under something such as:
/mnt
and rebuild the config with:
devfsadm -R /mnt
be careful if you have a mirrored filesystem though, you don't want to update just one of the mirrors without first breaking the mirror..
.7/M.

Cannot update Video Driver on Satellite L675

Hi all!
I have problem i bought 675 like 7 months ago for 1099. Since it was the top "gaming" laptop and as time pass i updated my Bios. Since then everything going wrong and i updated my Bios like half year ago after 1 month when i bought laptop.
Like i sayed, as the time passed i start geting like lag spikes if i watch videos, playing games, lisening music.
It put like frezze noise, like pc frezes for 2sec and squiks realy anoying.
Don't know how to fix.
I guess its problem of procesor i5 or cuz bios.
Then when i tryed to updated my Display driver there is no freaking way to updated its just mission impossible.
Toshiba didn't care a bit to make updated drivers for costumers even if i tryed to download it from AMD official site.
It says cannot updated driver since its not suported and it says that i go to toshiba website for new drivers and there are no new drivers for my pc.
So i stucked and new games need new drivers like few games dont wana start cuz i dont have updated my drivers.
Its ridicules.
I hope that u will be able to help me up with my drivers to update. If not... oh well altest i know why not to buy another toshiba laptop if they dont care about costumers.
Thanks and sry for my bad english.
0101 - Operating System : Windows 7 Home Premium 32-bit (6.1, Build 7600) (7600.win7_gdr.120305-1504)
0102 - Language : Slovenian (Regional Setting: Slovenian)
0103 - BIOS : InsydeH2O Version 2.40
0104 - Processor : Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (4 CPUs), ~2.5GHz
0105 - Memory : 4096MB RAM
0106 - Available OS Memory : 3958MB RAM
0107 - Page File : 2612MB used, 5301MB available
0108 - Windows Dir : C:\Windows
0109 - DirectX Version : DirectX 11
0110 - DX Setup Parameters : Not found
0111 - User DPI Setting : Using System DPI
0112 - System DPI Setting : 96 DPI (100 percent)
0113 - DWM DPI Scaling : Disabled
0114 - DxDiag Version : 6.01.7600.16385
02 - Processor
0201 - Caption : Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz x4 ~2534MHz
0202 - CurrentClockSpeed : 1190MHz
0203 - L3 Cache : 3,00 MB
0204 - L1 Cache : 32,00 KB
0205 - L2 Cache : 256,00 KB
03 - Video Adapter
0301 - Card Name : ATI Mobility Radeon HD 5650
0302 - Manufacturer : ATI Technologies Inc.
0303 - Chip Type : ATI display adapter (0x68C1)
0304 - DAC Type : Internal DAC(400MHz)
0305 - Device Key : Enum\PCI\VEN_1002&DEV_68C1&SUBSYS_FD121179&REV_00
0306 - Display Memory : 2737 MB
0307 - AdapterRAM : 1,00 GB

The only thing that i think of is to find newer drivers from other satellite laptops with similar graphic card.
I searched a bit and find [those|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp].
Select Satellite C Series:
C660
Display Driver
ATI
Windows 7 - 32 Bit
8.783.3
C850
10/05/12
Display Driver
AMD
Windows 7 - 32 Bit
8.932.5.3
You can also try downloading 64 bit drivers. There is a possibility that they include 32 bit as well.
C670D
Display Driver
ATI
Windows 7 - 64 Bit
8.812.2.2
Satellite L Series:
L750D
Display Driver
AMD
Windows 7 - 64 Bit
8.911.6
It's a longshot, but you can try.

Running Windows 7 via bootcamp but cannot update to either 3.1 or 3.2. My MAC OS is 10.6.8

I am running Windows 7 via bootcamp but cannot update to either 3.1 or 3.2. My MAC OS is 10.6.8.
I can download either version, but I get an error message after attempting to install.
First tried Boot Camp 3.2. Error message indicated I need Boot Camp 3.1 first.
Then tried Boot Camp 3.1. Error message indicated I need Boot Camp 3.0 first
Then tried Boot Camp 3.0. Would not allow download.
I know the OSX came with Boot Camp why is there a problem????!!

3.0 is on your OS X DVD. Clearly spelled out in the guide in Boot Camp Assistant, and here -
www.apple.com/support/bootcamp : manuals, look for 10.6 pdf version.
3.0 is pre-requisite for any other
OS X comes with Boot Camp Assistant and you access 3.0 drivers while in Windows.

Where I can find documentation and updated drivers for Labview 3.1.1?

I'm running LabView 3.1.1 on a PowerMac 7600 and I have run into some difficulties geting it to work properly. The documentation has been lost and I cannot find it online anywhere. Any help with this and updated drivers would be greatly appreciated.

I have LV manuals going back to version 1. I still have a couple of systems operating in version 3 so I will not give up my manuals, but I may be able to help in some way. They are a set of eight books totalling about 6 inches thick. Is there something specific I may be able to help with?
A recent posting on this forum was from a museum of old computers and early LV systems. They were looking for stuff older than yours. I don't know if they could help or not.
Lynn

Satellite A200: I cannot establish drivers unknown devices

Hi,
In the system devices I cannot establish drivers for (a) mass storage device, (b) Unknown device in Other Devices section.
Can anyone help me on this?
kvasilis

If you use the XP on the notebook then you should update definitely the BIOS to the XP version. Then reinstall all available drivers from the Toshiba European page.
This will help to get rid of these unknown devices in the device manager.

How to update drivers for Lenovo IdeaCentre C560?

Hi all,
I have PC Lenovo IdeaCentre C560 with Windows 8.1.
There is installed LSC (Lenovo Solution Centre), which has "System" section and inside it is "Lenovo software update" block, where LSC advices me "Go to Lenovo's website to update the Lenovo software on your PC".
But there are thess problems:
There are 20 drivers for C560 for Windows 8.1 on Lenovo website.
Which of them I have to download and install?
I have tried at my Device Manager to verify for all of my devices to be last update (it was terrible work) and I always got information that my driver is up-to-date.
Somebody have told me that LSC is not SUITABLE for C560 machine.
So I have these questions:
Does anybody have installed LSC on his C560? A does it work fine (so it find and install always new driver) or he only get abstract ionformation Go to Lenovo's website to update the Lenovo software on your PC?
Are there other possibilities to regularly update drivers then LSC?
Thanks.
Solved!
Go to Solution.

Dragnote,
maybe it was caused my terrible English, so I will try to explain relevant aspects once again:
1) I bought my Lenovo IdeaCentre C560 (part number: 57322363) on 22th of May this year from "stone" shop, not through internet. The Web site of this shop is www.mironet.cz, but there is not my PC there in actual supply, because the shop stopped to sell this model. But the parameters etc of this model is on Mironet's Web site here:
http://www.mironet.cz/lenovo-ideacentre-c560-23quot-fhd-intel-core-i54570t-36ghz-8gb-1tb-dvdrw-nvidi...
but is is in Czech language.
2) My Windows are in Czech language, so I will translate it for you into English and therefore some informations/messages can be not fully exact. OK?
2) The LSC program was installed on my new PC with MS Windows 8.1 64-bit. I was only wanted to USE it! And why not. I got with PC only very slim User's Book, where was nothing much usable. And nothing about updating system and drivers, nothing about backuping etc. So I started to use SLC, because it was preinstalled there.
3) Problems of detect WHICH driver I have to update and HOW to do it:
3a) I tried three programs for detecting of my not-to-updated drivers: SLC, Detective and Smart Driver Update with these results: SLC only advice me to go to Lenovo website, Detective and Smart Driver Update gave me list of my not-to-update drivers, but the lists were rather different.
3a) The link I provided, http://forums.lenovo.com/t5/forums/replypage/board-id/ideaCentre/message-id/9220, lists 20 drivers and all of them were released in period between 16 Oct 2013 and 01 Dec 2013, so I have used abbreviation "end of last year", but you are right - mostly of them are from 16 Oct 2013.
3b) I TRIED to compare their date of released with drivers installed on my PC, but I have two basic problems:
3b.1) How to identify WHICH driver on my PC corresponds to drivers on Lenovo web site?
The names are NOT the same. For example: on Lenovo Web site is "Realtek Audio Driver V6695 for Microsoft Windows 8.1 (64-bit) - Desktop", released 17 Nov 2013, version: 6.0.1.6695. Then I found on my Device manager "Realtek High Definition Audio". So my question already is: "Is it the corresponding driver or not?". But let us say: it is.
So, now we can continue with next information on my driver : date of release is 15 Nov 2013, version: 6.0.1.7093. So I am not sure if these two drivers (one on Lenovo Web site, second on my PC) are the correct PAIR. There is antagonism between date of release and the version number.
3b.2) How to update, when I already "decided", that my driver is not-to-updated and therefore I need it to update?
I launch my Device manager, then I choice some driver, then I click on "to update driver software" and there display two possibilities: find driver on computer, or find driver on Internet. So I click on "Find driver on Internet". Then I wait about 10 seconds and then I ALWAYS get the SAME information: "The driver of this device is up-to-date"
This "optimistic" message I received for about 30 of my drivers. So there are three possible explanations how to explain it:
1) LSC, Detective and Smart Driver Update lie to me, when they tell me "You have some not-to-update drivers", because in reality all of my drivers ARE up-to-date.
2) I really have some not-to-update driver but because I cannot address correct WHICH driver is not to-up-date, I try wrong driver to update. Wrong, because it IS up-to-date.
3) I identify the correct not up-to-date driver but the choise "find driver on Internet" open finding of this procedure in non-Lenovo Web sites.
And maybe you are right when you write: "Sometimes, on a new system, Lenovo installs drivers that are "newer" than the drivers listed on their site. Don't worry, keep the newer drivers."
I apologize very much,but I am not able directly to use the information from you.
I never updated drivers on my old PC (I had it 12 years!), so I have no experiences what happens when I replace my NEW (up-to-date) driver with some OLD driver installed from Lenovo Web site. I am affraid that my keyboard, mouse, screen etc will stop its function.
When I bought this Lenovo machine, I to myself have told that I will keep my drivers up-to-date, but I do not how.
Mirek

Dv7-6059eo, microphone and camera not working, have re-installed the system, updated drivers etc.

Hello. A couple of days ago, my microphone and camera suddenly stopped working. When I started up my camera in Skype, it said "Please open YouCam" or something like that, and when I did, it told me to update it. So I did. Then it told me that I had to uninstall the current version of YouCam. When I did and tried to install the update, it said something like "no video device detected".
After updating drivers and un-/installing things, I recovered my whole computer to fabric options. Still not working. So I suspect that it might have something to do with the hardware. Although I don't know what should have caused it, as it just happened randomly in the middle of the day.

Brad K59 wrote:... Photo Booth cannot recognize my built in Mac camera (ISight)...
iSight camera failure after OS X 10.9 Mavericks update
Brad K59 wrote:... I am missing the com.apple.photobooth.plist file ... how do I rebuild the file? ...
Try the User Tip suggestions first. Your system does need a plist, but a properly working OS X automatically generates any needed plist files when you launch the associated app (if its plist does not already exist.)

15k after patches: Cannot assemble drivers for root /pci@1c,700000/scsi@1/d

All domains booted fine before patching through my local patch proxy on Thursday, June 15th. After running smpatch update, all domains went into the reboot loop with:
Cannot assemble drivers for root /pci@1c,700000/scsi@1/disk@0,0:b
Jun 15 20:42:57 2006 Cannot mount root on /pci@1c,700000/scsi@1/disk@0,0:b fstype ufs
I've reviewed other posts with similar error but there shouldn't be a driver completely missing, as it did boot fine many times before patching. From google search it looked as if /kernel/drv/sd.conf might have been effected by a patch, but that doesn't seem to be the case as a search through all /var/sadm/patch doesn't show any files with that string. Perhaps the scsi drivers were changed somehow?
If this is a patch, I would really like to narrow down which one it might be so I don't need to un-install all of them.
t

Thanks for the responses, I really do appreciate the help.
My goal was to install Solaris 8 onto 2 systems, a V880 and a V890.
Initially my problem was that I tried to install our existing Solaris 8 07/03 flash archive onto the V880 (and V890). But the V880 and V890 needed newer hardware links, I had to re-create our Solaris 8 flash archive with the 02/04 release of Solaris 8.
Now the V880 and V890 would boot from the network and the OS would install onto the local drives. But when the OS would boot from the local disk, I would received the error "Cannot assemble drivers for root /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e01
1476eb1,0:a". The machine would panic and cycle - booting and panincing over and over again.
Since the net boot image recognized the disks but the flash archive installed image did not, I booted the V880 with "boot net -s" to view the loaded modules. I compared a V240 running Solaris 8 with the net booted V880 as I have no other V880s in the environment. I also compared the directories /kernel/drv/sparcv9/ to see which drivers were missing.
What I discovered is that since I create our flash archive on a scsi based system and I did not use the SUNWCXall package cluster in the profile, the drivers for the FC-AL drives do not get included on the system from which the flash archive is created. The V880 and V890 internal drives are FC-AL based. This was the root cause of my problem.
Thru the comparison described above, I learned that I needed to add the following packages to the install profile of the master system:
socal driver - SUNWluxl and SUNWluxlx
qlc driver - SUNWqlc and SUNWqlcx
usoc driver - SUNWusoc and SUNWusocx
Then I recreated the flash archive and re-jumped the V880 and V890. Both systems booted from their internal drives. And there was much rejoicing...

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

"Cannot update iPod because the selected playlists no longer exist"

That is an error message I'm now getting. My iPod is erased but iTunes works fine. How do I fix this? (I've already restored all settings, updated, software, etc.)
HP Windows XP

" When I try to put it back it says "Songs on the iPod cannot update because all of the playlists selected for
syncing no longer exist"."
http://discussions.apple.com/thread.jspa?messageID=607312&#607312

G5345uk cannot update drivers

Similar Messages

Maybe you are looking for