G550 causes DLink router to reboot every 10 seconds

I have a new Lenovo G550, running Vista Home Premium 64-bit and a new DLink WBR-1310 wireless router. Each time the laptop connects to the router through either a wireless connection or a LAN cable connection the router crashes. Then the router rebooys, establishes a connection with the laptop, communication starts and the router crashes again. The cycle continues until I disconnect the laptop. The crash-reboot-crash cycle takes about 10 seconds.
I tested a different router. A TrendNet TEW-432BRP router. The same thing happens. The router crashes as soon as the laptop is able to communicate with the router.
I've taken the laptop to work where I used Microsoft Windows Update and Lenovo Update to ensure that all drivers on the laptop are updated. The only S/W on the laptop is Microsoft Office Pro 2007 and AVG-free (anti-virus) + the S/W that comes with the G550.
At work, the laptop does not crash the router. But at work it does not connect directly to the router. Instead it is connected by LAN cable through a Vonage VOIP system. Meaning the laptop is connected by a LAN cable to the Vonage VOIP unit. And the Vonage unit is connected by a LAN cable to the router.
I also tested the laptop at a couple of public and hotel wireless connections. The laptop is able to connect to these public wireless systems without causing them to crash.
Back at home, the DLink and TrendNet routers work OK with older computers running Windows XP Pro and Windows Vista Home Basic. The DLink also has the latest firmware. WBR-1310 H/W: B1, firmware 2.02.
AVG does not report any viruses and the AVG log file contains no record of finding one in the past.
The router has no custom settings. It is configured with factory defaults. The laptop's network connections (for the LAN and wireless connections) have no custom settings. The laptop's network connections are configured to obtain IP address and DNS server addresses automatically.
My theory about the problem = something in the communication between the laptop & router crashes the router. Perhaps there is something in Windows Vista Home Premium 64-bit. Perhaps something in the Lenovo S/W.
I am looking for help.
Thank you.
Solved!
Go to Solution.

I had this problem too.  Specifically a Dlink router (WBR-1310) and a Lenovo laptop (Y530) running Vista Home (32-bit).  It would show that my laptop connected to the network, then a few seconds later the connection would be down and it would continuously connect/disconnect.  My other system that was connected just fine through the router (running Windows 7) would get kicked off the network.  Connecting the Vista laptop directly to the cable modem, though, would work just fine.
Found this post, and it worked for me.  http://www.justanswer.com/questions/1wau3-bought-lenovo-laptop-y430
Just go into your Dlink configuration's Advanced tab, then the Advanced Network sub-tab.  Uncheck the UPnP (universal plug and play), save the settings, and let the router reboot.
Now both my systems (Vista and Windows 7) are happy and connected through the router.

Similar Messages

  • Why is my CPU spiking, causing the desktop to reboot every few seconds?

    I watch the CPU reading in the Disk Monitor spike in usage (from about 5% to 100%) every 30-90 seconds. Every time it does, the desktop reboots, taking me away from whatever program I am using to the Finder. What should I do?

    Check for incompatible third party applications.
    [One person reports success|http://discussions.apple.com/message.jspa?messageID=8969672#8969672] with installing the latest version of Stuffit upgrade (13.0.3)
    [If using Stuffit, check this one first|http://discussions.apple.com/message.jspa?messageID=8884712#8884712]
    [Finder crashes associated with using Stuffit|http://discussions.apple.com/thread.jspa?threadID=1873700&tstart=0]
    [Finder crashing/looping/closing folders (Stuffit issue)|http://discussions.apple.com/thread.jspa?threadID=1882285&tstart=0]
    [Finder crashes associated with using Afloat|http://discussions.apple.com/message.jspa?messageID=8852780#8852780]
    [Quicktime 7.6 update issues with 3rd party software|http://www.macfixit.com/article.php?story=20090121223437550]

  • WRT54GX2 reboots every 10 seconds

    I have a linksys WRT54GX2 wireless router that reboots every 10 seconds. I've read that it's a firmware problem but how am I supposed to update the firmware from the interface in a matter of 10 seconds?

    You can try updating the firmware using TFTP utility...BUt before you upgrade the firmware...Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...
    Download the TFTP utility and save it on the dekstop.
    Follow these steps to upgrade the firmware on the device : -
    Double click the TFTP.exe file and click run.
    For Server- Enter the IP Address of the router that you assigned.  By default, the router is 192.168.1.1...
    For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
    For File- Click the triple “…” button and browse for the .bin firmware file...
    Click Upgrade button to start upgrading.  A progress bar should show up to show the progress.
    Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • X2200 and IB card causes reboot every 10 seconds

    Hi
    we're currently facing a problem with x86 server and PCI Infiniband Adapter.
    Sun as the IB card is in the slot, the server reboots every 10 seconds. This
    causes the network connection to get lost (including ILOM). It is impossible
    to boot the system (hence no OS could be installed ether). Sun as the IB card
    is taken out the system works well.
    Sun P/N: 375-3382
    Dual 10Gigabit/Sec (4x) InfiniBand Host Channel Adapter
    Mellanox InfiniHost III Ex, MHEL-CF256-T, x8 PCI Express, RoHS:Y
    Link to the IB card:
    http://sunsolve.sun.com/handbook_private/Devices/Communication/COMM_Infiniband_PCIExp.html
    Link to the X2200M2 Server
    http://sunsolve.sun.com/handbook_private/Systems/SunFireX2200_M2/components.html

    What OS are will you be installing?
    On our Infiniband cluster (v20z's with Infinicon IB cards), we first installed linux, then the Mellanox drivers (supplied by the IB vendor), then installed the cards. All has been well for over a year of uninterrupted uptime.
    Sounds like the default OS installation (which would be Solaris) does not recognize the card and crashes.

  • My iphone switches off and reboots every 30 seconds

    My iPhone switches off and reboots every 30 seconds, has antone experienced this problem? It happened a couple of weeks ago and I took the sim card out , cleaned it and put it back. This solved the problem for about 2 weeks, but it doesnt help now

    Well Solution 1 : Reset your modem and Restore your Iphone 4 as a new iphone and try and it still keeps you off
    try with another modem and it still keeps you off then your wireless adaptor might crash and you need to go to apple store

  • WRT54G as AP causing dlink router to restart

    I am trying to use a WRT54Gv5 as just and access point.  To do this I have it connected to my main router over the lan connection of the WRT54G (to the lan on the dlink of coarse) and have DHCP turned off on the WRT54G, so that the dlink router handles that.  It all seems to be working properly, with wireless devices being correctly assigned ips by the main router and successfully accessing the internet.  However I have two problems.  The first one is whenever the WRT54G is running the dlink router restarts every few minutes.  I have checked and this does not happen when the WRT54G is disconnected or powered down.  For the time being I have it powered down so no wireless network currently.  This is the main problem I would like fixed.  The second problem is that I cannot access wireless devices from the LAN when the wireless is running.

    If you are facing inetmitten problem with the linksys router, first thing which you can do is Upgrade the firmware of your router,and this will solve your problem. Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop.Once you downloaded the firmware of your router, Disconnect your D-Link router from Linksys router, and let your computer be connected to Linksys router.
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable.
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on
    "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • Router keeps rebooting every few moments

    I have a WRTP54G router and this morning when I tried to connect to the 'net, I discovered that the router keeps rebooting itself. It  barely gets through the process before it dumps and starts all over again, making getting online impossible. I use the power adapter that came with the router and it's plugged into the wall directly. I have no idea what this thing is doing or why. Anyone familiar with this problem? Suggestions?

    Ok Everyone I would like to suggest to check your power supply. I have the same router and I have had to factory default it several times because of my provider pushing firmware to it and messing things up! This time after several resets to bring my router back to default it seems my power supply totally burned out due to power surge trying to start and restart my router so now it will not even boot my router even up to the dreaded flashing power LED. I received an exchange router from them to replace my WRTP54G but is is not the same device. They sent me a device they currently use for new customers and it has many issue if power is lost and the WIFII need to be set up after any power reset as well as WEP WPA and other setting not taking. I used the power supply that the replacement router came with and now I can view my setup page and config on the WRTP54G router. So check your power supply! I thought it crashed because of firmware only but after finally getting it to work with the new power supply it looks like it was multiple issues. I found another WRTP54G on EBAY and will wait to get it to use the power supply and have a spare router available and send back the junk router they sent me to replace my WRTP54G.

  • IPad reboots every 2 seconds repeatedly

    So my iPad 2 has been repeatedly rebooting its self every 2 seconds for the past two days. It doesn't seem to be getting any better. I would reset everything on settings, but I don't have enough time (given only 2 seconds every reboot). I don't know what to do! All of my school and social life is on there. I need to get to it for projects and school related papers. Please help!

    Try a reset (hold the home and power keys down until the Apple logo appears).
    Barry

  • Upgrade to 10.4.5 Caused Spotlight & Clock to Blink Every 15 Seconds

    Installed Tiger 10.4.3 and everything worked great, then updated with Combo to 10.4.5 and the clock and Spotlight in upper right hand corner keep blinking once every 10 seconds. Can't use the Spotlight unless you catch it perfectly on that one second. Tried downloading manual version of update from Apple, and it goes all the way to the end and then Safari quits. Updated through Software Update. Went to Date & Time and if i check the box for Date & Time it just unchecks itself.

    Computer crashed not long after this!! Long story!!

  • I believe OS 10.10.2 is causing my mac to freeze every few seconds.

    For the last two weeks or so, my MacBook Pro (2011) has been freezing every few seconds. I can barley type this now. When I pull up Activity Monitor, it shows my memory running at 3.0+ out of 4 GB's. I've tried everything I could think of. My Mac is more of a internet surfing comp so I didn't mind reinstalling OS. It worked great for about 30 minutes then everything started to freeze again. Im curious if anyone else is having this issue and if anyone's figured out how to fix it. I ran a diagnostic on my ram and thats not the issue. Im to the point of upgrading my ram but i think it's dumb reverting to that when the 4 GB has been plenty for me in the past.
    Thank You.

    Problem description:
    System lagging every few seconds.
    EtreCheck version: 2.1.8 (121)
    Report generated February 16, 2015 at 4:19:55 AM PST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 216
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 2 days 23:36:23
    Disk Information: ℹ️
        ST9320325ASG disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (288.95 GB free)
                Encrypted AES-XTS Unlocked Failed
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        Default Browser: Version: 600 - SDK 10.10
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             6%    WindowServer
             0%    com.apple.WebKit.Networking
             0%    fontd
             0%    com.apple.WebKit.WebContent
             0%    Safari
    Top Processes by Memory: ℹ️
        163 MB    com.apple.WebKit.WebContent
        142 MB    softwareupdated
        103 MB    Safari
        77 MB    mds_stores
        77 MB    Finder
    Virtual Memory Information: ℹ️
        208 MB    Free RAM
        1.60 GB    Active RAM
        1.41 GB    Inactive RAM
        1.03 GB    Wired RAM
        2.92 GB    Page-ins
        66 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 13, 2015, 04:41:28 AM    Self test - passed

  • What would cause my MRDVR to reboot every 24 hours?

    Reboots exactly 24 hours, to the minute, from the last time it rebooted. Too precise to be a bad box. Sleep timer is set to never.

    Have you tried the in home agent to rest MRDVR?
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • IChat - jabberd/router - new connection every few seconds

    Hi, since upgrading to 10.6 I have seen repeated entries in my syslog as...
    Sep 7 09:08:49 mailgate jabberd/router[8943]: [127.0.0.1, port=57989] connect
    Sep 7 09:08:49 mailgate jabberd/router[8943]: [127.0.0.1, port=57989] disconnect
    Sep 7 09:08:51 mailgate jabberd/router[8943]: [127.0.0.1, port=57990] connect
    Sep 7 09:08:51 mailgate jabberd/router[8943]: [127.0.0.1, port=57990] disconnect
    there are literally thousands of these entries, any idea what it could be? Apologies for the vagueness but I have no idea where to start looking

    I'm having similar problems after migration to SLS (didn't use ichat before, but now i would like to)
    Problems started by using a separate data and an OS disk?
    I named my datadisk "My Data", but got into trouble with mysql, so i renamed my datadisk "MyData".
    However, i can't get iChat starting up, i first had to change the ichatserver.plist (it still had all "My Data" entries, which i corrected. However i'm still stuck with starting up. Buttons are enabled, but after some time iChat still is stopped, and the start button is visible and enabled.
    Any hints wich files to edit (or to trash and let rebuild?)

  • Airport Extreme external hdd causes router to reboot

    When I try to access my external WD hard drive (formatted to FAT32) on my AirPort Extreme, it freezes and causes the router to reboot. How do I fix this?
    I am accessing the hdd from windows 7 pc.

    Try adding a powered USB hub....even if the WD drive has its own power supply.
    Reason...the USB port is borderline as far as its ability to supply sufficient power for a hard drive even when the Extreme is new and even when the drive has its own power supply.
    If the Extreme is a few years old, it is not delivering as much power to the USB port as it once did, and it needs some help.
    Worst case, the internal power supply on the Extreme is starting to head South. That is usually not an issue until the device is 4-5 years old.

  • WRT54G2, FW 1.5.01 - Website Blocking by URL Causing Router to Reboot?

    Has anyone seen an issue with the use of this feature causing the router to reboot frequently? Seems to be more prevalent with the amount of traffic. Router recovers but drops all wireless clients and real time protocol (voice) sessions are interrupted. I only had 3 rather short request URIs blocked--wasn't asking too much of the thing. Soon as they were removed, router was steady as a rock...
    Anyone else seen the same thing/found a solution?
    Thanks in advance!

    Hard-reset the router for 45 seconds and try to configure the router again...

  • EA6500 reboots every few hours

    Hi, I got my new comcast connection and using CISCO DPC3008 cable modem and EA6500 Wifi Smart Router. Internet works fine and then suddently the internet goes away. Further investigation shows EA6500 Wifi router just reboots every few hours and then wifi devices don't reconnect like it used to do with previous routers.
    Any idea what is wrong? Have the latest firmware. Reset multiple times.

    Hi,
    Is there a specific time when the router reboots? This performance seems weird and there's no way for most of us - the end users to check what causes the reboot. Anyways, you can try to set static channels on both 2.4Ghz and 5 Ghz bands. For the 2.4Ghz - set it to channel 9 - 2.452 Ghz and for the 5Ghz band, set it to 153 - 5.765 Ghz.
    This is based from  an observation on my friend's N450 Belkin Router - got so curious of it's "self healing" feature. Based on observation, self healing will just re-initialize the router based on the specific time that had been set and it will cycle through other available wireless channel. So, to avoid re-initialization, we can try setting a static wireless channel on EA6500.
    If everyone needs to believe in something, I believe I'll have another beer..

Maybe you are looking for

  • How do i change the icloud on my devices

    Hi there, I have an Iphone and a Ipad and I was using the same Icloud account to do the backups, but now is full from my photos on streaming and the doccuments i use to do my work So i created a new Icloud account so i can use that new account for my

  • Bose Sound Docks are no longer compatible with Apple iPhones or iPods?

    When plugging my iPhone 4S or 5, or my iPod 3rd Gen or 7th Gen into my Bose Sound Dock, I recieve a message that reads, "This iPhone/iPod is not compatible with this accessory" and will not play stored music. Background Info:       - The Bose Sound D

  • Monitor "no input signal"

    When I turn on the computer and the monitor, the monitor does not recognize a signal from the computer.  I have tried restarting the monitor and the computer, unplugging all cables including the power cables and reconnecting, I re-seated the graphics

  • RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

    Hi, All the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolv

  • Modifying Vector List

    Hello, I have used AJAX to create a search list that is linked to a text box. So, as the user enters the a word in the text field then suggested matches are displayed below. The suggested matches come from a vector list. All of this works fine. I wan