G550's numeric keypad does not work as it should be

Goodnight everyone, recently bought a laptop lenovo G550. He has a numeric keypad and one thing is making me confused. The key should be a dot "." is actually a comma ","..... what should I do? I tried everything ... My current setup is Portuguese Brazil ABNT 2
Please Help-me
Stevan Cseke
Brazil
Note from Moderator:  Private information removed for your protection.

try this : http://windows.microsoft.com/en-US/windows-vista/C​hange-your-keyboard-layout

Similar Messages

  • Number 2 key on numeric keypad does not work. All other keys work properly.

    The number 2 on the numeric keypad does not work.  Is there some way to clean it?  If not how do I go about ordering another keyboard?

    inside the remote there is a micro switch for each direction each can break
    so yeah you could be the first who write about the right arrow key microswitch being broke in your atv

  • LR 2.6 Numeric Keypad + Does not work

    Windows XP sp3 -- I have searched and noted others have this problem, but have not been able to find a solution or workaround.
    How can I get my numeric keypad + sign to work with LR (as it does with CSR 4)?
    Thanks
    Mike

    Thank you sooo much for this answer. I use an iMac G5, but still, had apparently done the same thing. It was so nice to find this solution and be able to fix it.

  • I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.  What should I do

    I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
    What should I do?

    Hi Anto2211,
    Please follow the thread: Black screen CC where this issue is already discussed and resolved.
    Let me know for any further query.
    Thanks,
    Ratandeep Arora

  • My down arrow key does not work as it should

    Hello to you.
    My down arrow key does not work as it should.
    When I use my down arrow key is the whole side going down.
    It is annoying when you write that you always end up bottom of the page when using the Down arrow key. I hope I can help me
    I use Windows Vista.
    Yours faithfully
    Anders Lodberg

    Check if you enabled scroll lock (fn + insert), in excel it scrolls page when enabled and move across cells when disabled
    3000 N200 0769-AL3, Intel C2D 2G T5750, IEL10 mb, Kingston 4G RAM, Samsung 320G HD, Broadcom lan 100, Agere modem 56k, Broadcom wifi g, AuthenTec fingerprint reader, Sonix 1.3M camera, LG DVD burner, Samsung 15,4" 1280x800 BrightView, Intel X3100 IGD 384M, Ricoh 5in1, Ricoh 1394, vista home premium sp2

  • Okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

    okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

    Hi sigrun from mo,
    If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
    Service Answer Center - iPhone
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Regards,
    - Brenden

  • I updated to 6.1.3 on my iPaad 1, and now my app store does not work.  What should I do?

    I updated to 6.1.3 on my iPad 1, and now my app store does not work.  What should I do?

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • TS1996 my zero key does not work as it should after software update any help

    my zero key does not work after a software update when i try to use it /pp0 then volume symbol appears on the screen just happened after the update

    Hello, pakie1. 
    Thank you for visiting Apple Support Communities.
    Here is a troubleshooting article that you may find helpful when experiencing keyboard issues.
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/ts1381
    Cheers,
    Jason H.

  • HT4623 i updated my ipad with ios7 but the keyboard does not work as it should hit the letters it is slow and does not click as it should

    updated my ipad with ios7 but the keyboard does not work its slow when i hit the letters does not click did not do this until i updated anyone can help me on this to fix it

    Settings>General>Reset>Reset All Settings

  • Numeric Keypad does not enter data into Excel

    Is there a way to turn on/off the numeric keypad for the imac intel based apple computer when using Microsoft Excel?
    I want to enter numeric data into the cells of a spreadsheet in the Excel program, but I can not figure out how to get the numeric keypad to work to do this. It will only work as a directional keypad, moving the active cell left or right, or shoot to the end of the spreadsheet. Consequently I forced to use the use the row of numbers above the keyboard (which is also the row of numbers below the function keys) to enter data.
    Strangely, the numeric keypad will enter data with other programs, such as Word or when entering data into an online page.
    I have searched Apple help without success.

    Make sure that NumLock has not been engaged. To toggle that on and off, press Shift-Clear ("Clear" is the key immediately above the 7 on the keypad).

  • Apple Bluetooth Keyboard: Numeric keypad keys not working

    Hi I have a G5 PPC and the 4, 5, 6, and + (all in a row) keys on the numeric keypad stopped working. Replaced batteries and re-paired the Bluetooth—no joy. Tried cleaning under these keys with a blast of air and it didn't help either.
    Any ideas? Appreciate any advice. Thanks
    Message was edited by: persist

    I don't think there's any way to take the board apart, my suspicion is that whatever mechanism causes them to register is warped or damaged in some way. I would think that repairing the board would not be cost effective, a new one would seem to be the way to go. Sorry that there's not a clearer answer.

  • LENOVO G560, BEEP SOUND ON STARTUP & SOME NUMERIC KEYPAD BUTTONS NOT WORKING

    My g560 sounds continous beeps while starts ups, some numeric keys on right side not working like 2, 4, enter key, etc.
    some times the number 2 keys works automatically any time while working on WORD file or on run command.
     whts the problem,, plz advice.

    Hi abgautam00.
    Welcome to Lenovo Community Forums!
    If your system still boots to windows ok,
        I think it's a stuck key that's causing the beep
    Try Installing this Software test
    http://www.passmark.com/products/keytest.htm
    Run this app within Windows and without pressing any keys see if there is a stuck key as it will light up on this tool
    Let me know your findings
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Just purchased a WKP-1314 bluetooth numeric keypad and not working

    Just purchased a Apple WKP-1314 for my new IMAC,
    Followed the instructions and it paired right up and then lost connection, then connected and then lost connection.
    Trying to find out if some else has had this problem with the unit before I make the 35 minute ride back to the store.
    Searched this site for it found nothing hoping others are using it or tried to get some inout thank you.

    Hello:
    Before you return it, try a couple of things:
    1.  Reset the SMC.
    2.  Reset the PRAM.
    If that does not help, take it back for replacement.
    Barry

  • Equals does not work where it should......

    This runs in a while next from mysql DB, gets 5 rows back.
    If a real date is in the field I want to print out the date in the else.
    otherwise I want to display nothing if the date field in MysQL DB has 0000-00-00 inside (default value).
    if (rs.getString(4).equals("0000-00-00")) {
    out.println("0000-00-00");
    } else {
    out.println("real date");
    Why does this not work???

    Hi
    Have you checked that the value coming from database is 0000-00-00 only for the results?
    If correct,
    Do the following :
    Put the rs.getString(4) value into a string. now compare the string. using the code
    String strDate = rs.getString(4);
    if (strDate.equalsIgnoreCase("0000-00-00")) {
    out.println("0000-00-00");
    else {
    out.println("real date");
    Try it
    Thanks
    Swaraj

  • Junk mail just does not work as it should

    I've had this for ages and just put up with it.
    I have my jumk mail settings set for
    Enable: the following types of messages are exempt from junk mail filtering: sender of message is in my address book (and in previouos recipients).
    I assume that this means that anyone sending a message who is in my address book will not then appear as junk. This does not happen and despite repeated attempts to assign each one as not being junk it never learns as I thnk it is supposed to. A very few of my incoming messages of people who are in my address book do not appear as junk but I can't see a pattern.
    Over time I have tried all kinds of ways to set the various settings but to no avail and now I really think that I should try and sort it as it is low grade annoying. I would appreciate any help anoyne could give.
    Pete Snowdon

    hey are you still having trouble with your ical publishing? it looks like it needs more testing...but try this format of the web address.
    http://ical.me.com/USERNAME/CALENDARNAME
    It looks like iCal hasn't updated when you updated your operating system if it's still writing to a .mac address like you suspected. The most recent version is 4.0.1. If you need to update your actual application you can try copying from another computer with snow leopard installed (I've tested this), or reinstalling Snow Leopard. (not a fun option for such a small issue I know)

Maybe you are looking for