G550 (Win7) Logon Process Initialization Failure

Hi,
after restoring my G550 (Win7) with a user created backup via OneKey an error during startup occurs:
"Fehler bei der Initialisierung des interaktiven Anmeldeprozess".
(Logon Process Initialization Failure)
Thanks in advance for your help.
Greetings

Hello mate,
Reinstall windows, something went wrong during install.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Similar Messages

Interactive logon process initialization has failed after system state is restored from backup

Recently one of my Windows 2008 server was restored from system state backup, and below error appears before during startup, before logon screen:
"interactive logon process initialization has failed. please consult the event log for more details"
I do not have recovery disk, also repair didn't work, any other solutions?
Thanks.

Hi Justin,
I would suggest you to use sfc to check if there is any systemfiles corrupted :
1. boot from cd
2. sfc /scannow /offbootdir=X:\ /offwindir=Y:\windows (X is boot partition , Y is windows system files partition )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CMDTUX_CAT:1685: ERROR: Application initialization failure

PeopleTools 8.19.04 requires an upgrade of tuxedo 6.5 patchlev ?? AND
Jolt, patchlev ?? . There are also some HP patches if you're moving
from tools 8.16 or below. We have successfully booted our BBLs on HP
with tools 8.19.04. Exact patch levels are in the release notes. If
problem continues, you might try PeopleSoft's Customer Connection.
"Wayne W. Scott" <[email protected]> wrote in message news:<[email protected]>...
Kevin:
1) You will get better Tuxedo help in tuxedo.general.
2) Okay, Tuxedo 6.5 on HP-UX 11; show the output from
tail $TUXDIR/udataobj/patchlev
3) Fix the NLS problems with: export NLSPATH=$TUXDIR/locale/C
{ it might be NLS_PATH; I often forget which }
4) It seems you are using PeopleSoft. The problem might lie in the PeopleSoft to Tuxedo
interface, whatever it is. I don't know where to direct you for that.
Wayne Scott
Kevin Medlin wrote:
Hi all,
Kinda new at the tuxedo stuff. Any help is appreciated.
Attempting to boot ...
Booting all admin and server processes in /software/pt819/hrms830/appserv/ps819tm1/PSTUXCFG
INFO: TUXEDO(r) System Release 6.5
INFO: Serial #: 101998665, Expiration NONE, Maxusers 1000000
INFO: Licensed to: PeopleSoft
Booting admin processes ...
exec BBL -A :
process id=12485 ... Started.
Booting server processes ...
exec PSAPPSRV -s@../psappsrv.lst -s@../psqcksrv.lst -sICQuery -sSqlQuery:SqlRequest
-- -C psappsrv.cfg -D PT81 -S PSAPPSRV :
CMDTUX_CAT:1685: ERROR: Application initialization failure
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error
handler
exec tmshutdown -y
Shutting down all admin and server processes in /software/pt819/hrms830/appserv/ps819tm1/PSTUXCFG
Shutting down server processes ...
tmboot: CMDTUX_CAT:828: NLS:6: Message not found, catalog CMDTUX_CAT, set 1, num
828
==============ERROR!================
Boot attempt encountered errors!. Check the TUXEDO log for details.
==============ERROR!================
Do you wish to see the error messages in the APPSVR.LOG file? (y/n) [n] :
Shutting down admin processes ...
Server Id = 0 Group Id = dbhrt2 Machine = dbhrt2: shutdown succeeded
1 process stopped.
y
PSADMIN.12243 [04/21/03 15:00:57](0) Begin boot attempt on domain ps819tm1
PSAPPSRV.12486 [04/21/03 15:01:06](0) PeopleTools Release 8.19.04 (HP/UX) starting
PSAPPSRV.12486 [04/21/03 15:01:09](0) Open file cache UPM : use
existing content
( 0) 0xc72c35ec DumpStack__18PSExceptionHandlerFi + 0xbc [software/pt819/hrms830/bin/libpssys.sl]
( 1) 0xc72c2e20 DumpStackEventHandler__18PSExceptionHandlerFPCUs + 0x48 [software/pt819/hrms830/bin/libpssys.sl]
( 2) 0xc72c4154 OnEvent__28CPSStackTraceRequestObserverCF8PS_EVENTPCvPv + 0x1c
[software/pt819/hrms830/bin/libpssys.sl]
( 3) 0xc5dca158 Notify__18CPSEventDispatcherF8PS_EVENTPv + 0x60 [software/pt819/hrms830/bin/libpscmn.sl]
( 4) 0xc5dba5b8 PSAssert__FPCcT1Ui + 0x88 [software/pt819/hrms830/bin/libpscmn.sl]
( 5) 0xc743855c SamIsSrcDB + 0x8c [software/pt819/hrms830/bin/libpssys.sl]
( 6) 0xc7498d6c StmSignon + 0x87c [software/pt819/hrms830/bin/libpssys.sl]
( 7) 0xc14fcd10 SgnDBSignon__FP11SGN_DBPARMS + 0x88 [software/pt819/hrms830/bin/libpssgn.sl]
( 8) 0xc620db5c InitInstance__10CNetServerFiPPUs + 0x434 [software/pt819/hrms830/bin/libpsnetapi.sl]
( 9) 0x000595f8 InitInstance__10CAppServerFiPPUs + 0xb0 [software/pt819/hrms830/bin/PSAPPSRV]
(10) 0x000591a4 tpsvrinit + 0xdc [software/pt819/hrms830/bin/PSAPPSRV]
(11) 0xc5a09f84 _tmmain + 0x328 [software/pt819/tuxedo65/lib/libtux.sl]
(12) 0xc59fcc80 _tmstartserver + 0x78 [software/pt819/tuxedo65/lib/libtux.sl]
(13) 0x00037408 main + 0x44 [software/pt819/hrms830/bin/PSAPPSRV]
(14) 0xc0143158 _start + 0xc0 [lib/libc.2]
(15) 0x00036608 $START$ + 0x1a0 [software/pt819/hrms830/bin/PSAPPSRV]
PSADMIN.12243 [04/21/03 15:01:54](0) End boot attempt on domain ps819tm1
Do you wish to see the error messages in the TUXLOG.042103 file? (y/n) [n] :y
150057.dbhrt2!PSADMIN.12243: Begin boot attempt on domain ps819tm1
150101.dbhrt2!BBL.12485: 04212003: TUXEDO Version 6.5 HP-UX B.11.00 U 9000/898
1623623321 unlimited-user license.
150101.dbhrt2!BBL.12485: LIBTUX_CAT:262: INFO: Standard main starting
150106.dbhrt2!PSAPPSRV.12486: 04212003: TUXEDO Version 6.5 HP-UX B.11.00 U 9000/898
1623623321 unlimited-user license.
150106.dbhrt2!PSAPPSRV.12486: LIBTUX_CAT:262: INFO: Standard main starting
150154.dbhrt2!PSAPPSRV.12486: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
150154.dbhrt2!tmboot.12481: 04212003: TUXEDO Version 6.5 HP-UX B.11.00 U 9000/898
1623623321 unlimited-user license.
150154.dbhrt2!tmboot.12481: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered;
initiating user error handler
150154.dbhrt2!tmboot.12481: NLS:6: Message not found, catalog CMDTUX_CAT, set
1, num 724
150154.dbhrt2!PSADMIN.12243: End boot attempt on domain ps819tm1

Red Rocket initialization failure

I started a new project this morning that would use Red R3D media and found the playback of 3K 2:1 R3D media quite choppy and then saw that a red X in the bottom right of Premiere CS 5.5.
Event: Rocket Initialization Failure
Unable to initialize the REDRocket(s). 1 requested, 0 initialized. The SDK reports 1 should be available.
Device 0 returned status: Old driver of firmware, driver available: 0.0.0.0 (1.3.5.0 required), firmware available 0.0.0.0 (1.1.10.1 required).
I am running driver 1.4.7.0 and firmware 1.1.14.38
RedCine-X v487 (Win7/64) sees the card and runs smoothly with it. Windows7 control panel sees it (and the driver/firmware) just fine.
Any suggestions as to why Premiere 5.5.0 can't use the card? Any help would be really appreciated, I need to get a jump on this job.
FYI
Win7/64 (all current patches applied)
12Gb RAM
GeForce GTX 480 with hack
external eSATA RAID
Red Rocket

Bump.
Any Adobe folks reading this? I've tried posting on Reduser as well without any replies.

Collection Server Initialization Failure

One of my collection servers will not initialize. The WinXP box was
replaced by a VMWare virtual WinXP machine and the ZAM 7.5 software was
installed on the new machine using the same name as the old server. I
installed the Task Server, Collection Server and the Collection client.
All of the services start and there are no errors in the event logs. The
manager shows the Task Server as running but the Collection server as
stopped. When I start the Collection server I get the errors shown
below. This is one of many Collection/Task Servers that I have setup
including some that have been replaced by virtual machines as this one
has been. All other Collection/Task Servers are running without error.
I'm willing to remove it from ZAM and re-install and have tried that
once to no avail. Any help is appreciated.
MSSQL2005
ZAM 7.5 IR13
Management Server Windows 2003
Collection/Task Servers WinXP
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
Bucket size: 200
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
Process Controller Initialized
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
Resetting all Workstations to Disconnected
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
Default Option Set (COptset) may have been updated
{67D90F66-44B1-40B4-B99E-47AC4AAC9D61}
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
Process Controller Running
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
Client cleanup. 0 entries.
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
Default Option Set (COptset) may have been updated
{695CA4D0-CF4B-47C2-83B3-07461265CB06}
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
Default Option Set (COptset) may have been updated
{56547EAC-3A97-4BFE-8648-CA68C8227574}
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
Updating cache file TSUsage32.exe as
..\Cache\EXEDir\Client\Win32\TSUsage32.exe.
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
Filestore checksum failure
Filename: .\Cache\EXEDir\Client\Win32\TSUsage32.exe, Chksum
calculated: 1, errno: 0
Catalog (size: 446464, chksum: 48497451), File (size: 446464, chksum:
48597282)
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
Unable to retrieve file TSUsage32.exe or write to
..\Cache\EXEDir\Client\Win32\TSUsage32.exe
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
Application Object Error at 12/2/2008 10:05:48 AM on BMMSUS1 by BMMSUS1
File Store Validation Failed.
[2.4.1216] This application was unable to access the file due to a
checksum failure. Source filename = TSUsage32.exe.
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
Updating cache file tscclient as .\Cache\EXEDir\Client\Linux\tscclient.
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
Filestore checksum failure
Filename: .\Cache\EXEDir\Client\Linux\tscclient, Chksum calculated:
1, errno: 0
Catalog (size: 556853, chksum: 46150589), File (size: 557419, chksum:
46259996)
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
Unable to retrieve file tscclient or write to
..\Cache\EXEDir\Client\Linux\tscclient
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
Application Object Error at 12/2/2008 10:05:48 AM on BMMSUS1 by BMMSUS1
File Store Validation Failed.
[2.4.1216] This application was unable to access the file due to a
checksum failure. Source filename = tscclient.
</EVENT>
<EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
Updating cache file colosx as .\Cache\EXEDir\Client\OSX\colosx.
</EVENT>
<EVENT AT="12/2/2008 10:05:49 AM" SEVERITY="Severe">
Filestore checksum failure
Filename: .\Cache\EXEDir\Client\OSX\colosx, Chksum calculated: 1,
errno: 0
Catalog (size: 1546124, chksum: 114527802), File (size: 1497396,
chksum: 111016250)
</EVENT>
<EVENT AT="12/2/2008 10:05:49 AM" SEVERITY="Severe">
Unable to retrieve file colosx or write to .\Cache\EXEDir\Client\OSX\colosx
</EVENT>
<EVENT AT="12/2/2008 10:05:49 AM" SEVERITY="Severe">
Application Object Error at 12/2/2008 10:05:49 AM on BMMSUS1 by BMMSUS1
File Store Validation Failed.
[2.4.1216] This application was unable to access the file due to a
checksum failure. Source filename = colosx.
</EVENT>
<EVENT AT="12/2/2008 10:05:49 AM" SEVERITY="Info">
Updating cache file UMxlator.exe as
..\Cache\EXEDir\Client\Win32\UMxlator.exe.
</EVENT>
<EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
Filestore checksum failure
Filename: .\Cache\EXEDir\Client\Win32\UMxlator.exe, Chksum
calculated: 1, errno: 0
Catalog (size: 1249280, chksum: 129525058), File (size: 1249280,
chksum: 129500295)
</EVENT>
<EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
Unable to retrieve file UMxlator.exe or write to
..\Cache\EXEDir\Client\Win32\UMxlator.exe
</EVENT>
<EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
Application Object Error at 12/2/2008 10:05:50 AM on BMMSUS1 by BMMSUS1
File Store Validation Failed.
[2.4.1216] This application was unable to access the file due to a
checksum failure. Source filename = UMxlator.exe.
</EVENT>
<EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Info">
Updating cache file siupd as .\Cache\EXEDir\SysinfoUpg\Linux\siupd.
</EVENT>
<EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
Filestore checksum failure
Filename: .\Cache\EXEDir\SysinfoUpg\Linux\siupd, Chksum calculated:
1, errno: 0
Catalog (size: 7776, chksum: 613014), File (size: 7642, chksum: 602893)
</EVENT>
<EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
Unable to retrieve file siupd or write to
..\Cache\EXEDir\SysinfoUpg\Linux\siupd
</EVENT>
<EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
Application Object Error at 12/2/2008 10:05:50 AM on BMMSUS1 by BMMSUS1
File Store Validation Failed.
[2.4.1216] This application was unable to access the file due to a
checksum failure. Source filename = siupd.
</EVENT>
<EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Info">
Updating cache file Colw32.exe as .\Cache\EXEDir\Client\Win32\Colw32.exe.
</EVENT>
<EVENT AT="12/2/2008 10:05:54 AM" SEVERITY="Severe">
Filestore checksum failure
Filename: .\Cache\EXEDir\Client\Win32\Colw32.exe, Chksum calculated:
1, errno: 0
Catalog (size: 2285840, chksum: 230582079), File (size: 2371856,
chksum: 255767264)
</EVENT>
<EVENT AT="12/2/2008 10:05:54 AM" SEVERITY="Severe">
Unable to retrieve file Colw32.exe or write to
..\Cache\EXEDir\Client\Win32\Colw32.exe
</EVENT>
<EVENT AT="12/2/2008 10:05:54 AM" SEVERITY="Severe">
Application Object Error at 12/2/2008 10:05:54 AM on BMMSUS1 by BMMSUS1
File Store Validation Failed.
[2.4.1216] This application was unable to access the file due to a
checksum failure. Source filename = Colw32.exe.
</EVENT>
<EVENT AT="12/2/2008 10:05:55 AM" SEVERITY="Severe">
Collection Server Error at 12/2/2008 10:05:55 AM on BMMSUS1 by BMMSUS1
Collection Server Initialization Failure
[2.6.4] The Collection Server failed to initialize.
Application Object Error at 12/2/2008 10:05:54 AM on BMMSUS1 by BMMSUS1
File Store Validation Failed.
[2.4.1216] This application was unable to access the file due to a
checksum failure. Source filename = Colw32.exe.
</EVENT>
<EVENT AT="12/2/2008 10:05:59 AM" SEVERITY="Info">
The Process Controller has terminated.
</EVENT>
<EVENT AT="12/2/2008 10:06:16 AM" SEVERITY="Info">
*** bmmsus1 *** One-minute Marker ***
</EVENT>

I tried copying the bin files from another server (again) and this time
it worked. I only wish I knew what I did different.
> One of my collection servers will not initialize. The WinXP box was
> replaced by a VMWare virtual WinXP machine and the ZAM 7.5 software was
> installed on the new machine using the same name as the old server. I
> installed the Task Server, Collection Server and the Collection client.
> All of the services start and there are no errors in the event logs. The
> manager shows the Task Server as running but the Collection server as
> stopped. When I start the Collection server I get the errors shown
> below. This is one of many Collection/Task Servers that I have setup
> including some that have been replaced by virtual machines as this one
> has been. All other Collection/Task Servers are running without error.
> I'm willing to remove it from ZAM and re-install and have tried that
> once to no avail. Any help is appreciated.
>
>
> MSSQL2005
> ZAM 7.5 IR13
> Management Server Windows 2003
> Collection/Task Servers WinXP
>
>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
> Bucket size: 200
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
> Process Controller Initialized
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
> Resetting all Workstations to Disconnected
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
> Default Option Set (COptset) may have been updated
> {67D90F66-44B1-40B4-B99E-47AC4AAC9D61}
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
> Process Controller Running
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
> Client cleanup. 0 entries.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
> Default Option Set (COptset) may have been updated
> {695CA4D0-CF4B-47C2-83B3-07461265CB06}
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
> Default Option Set (COptset) may have been updated
> {56547EAC-3A97-4BFE-8648-CA68C8227574}
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
> Updating cache file TSUsage32.exe as
> .\Cache\EXEDir\Client\Win32\TSUsage32.exe.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
> Filestore checksum failure
>
> Filename: .\Cache\EXEDir\Client\Win32\TSUsage32.exe, Chksum
> calculated: 1, errno: 0
>
> Catalog (size: 446464, chksum: 48497451), File (size: 446464, chksum:
> 48597282)
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
> Unable to retrieve file TSUsage32.exe or write to
> .\Cache\EXEDir\Client\Win32\TSUsage32.exe
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
> Application Object Error at 12/2/2008 10:05:48 AM on BMMSUS1 by BMMSUS1
> File Store Validation Failed.
> [2.4.1216] This application was unable to access the file due to a
> checksum failure. Source filename = TSUsage32.exe.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
> Updating cache file tscclient as .\Cache\EXEDir\Client\Linux\tscclient.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
> Filestore checksum failure
>
> Filename: .\Cache\EXEDir\Client\Linux\tscclient, Chksum calculated: 1,
> errno: 0
>
> Catalog (size: 556853, chksum: 46150589), File (size: 557419, chksum:
> 46259996)
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
> Unable to retrieve file tscclient or write to
> .\Cache\EXEDir\Client\Linux\tscclient
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Severe">
> Application Object Error at 12/2/2008 10:05:48 AM on BMMSUS1 by BMMSUS1
> File Store Validation Failed.
> [2.4.1216] This application was unable to access the file due to a
> checksum failure. Source filename = tscclient.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:48 AM" SEVERITY="Info">
> Updating cache file colosx as .\Cache\EXEDir\Client\OSX\colosx.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:49 AM" SEVERITY="Severe">
> Filestore checksum failure
>
> Filename: .\Cache\EXEDir\Client\OSX\colosx, Chksum calculated: 1,
> errno: 0
>
> Catalog (size: 1546124, chksum: 114527802), File (size: 1497396,
> chksum: 111016250)
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:49 AM" SEVERITY="Severe">
> Unable to retrieve file colosx or write to .\Cache\EXEDir\Client\OSX\colosx
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:49 AM" SEVERITY="Severe">
> Application Object Error at 12/2/2008 10:05:49 AM on BMMSUS1 by BMMSUS1
> File Store Validation Failed.
> [2.4.1216] This application was unable to access the file due to a
> checksum failure. Source filename = colosx.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:49 AM" SEVERITY="Info">
> Updating cache file UMxlator.exe as
> .\Cache\EXEDir\Client\Win32\UMxlator.exe.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
> Filestore checksum failure
>
> Filename: .\Cache\EXEDir\Client\Win32\UMxlator.exe, Chksum calculated:
> 1, errno: 0
>
> Catalog (size: 1249280, chksum: 129525058), File (size: 1249280,
> chksum: 129500295)
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
> Unable to retrieve file UMxlator.exe or write to
> .\Cache\EXEDir\Client\Win32\UMxlator.exe
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
> Application Object Error at 12/2/2008 10:05:50 AM on BMMSUS1 by BMMSUS1
> File Store Validation Failed.
> [2.4.1216] This application was unable to access the file due to a
> checksum failure. Source filename = UMxlator.exe.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Info">
> Updating cache file siupd as .\Cache\EXEDir\SysinfoUpg\Linux\siupd.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
> Filestore checksum failure
>
> Filename: .\Cache\EXEDir\SysinfoUpg\Linux\siupd, Chksum calculated: 1,
> errno: 0
>
> Catalog (size: 7776, chksum: 613014), File (size: 7642, chksum: 602893)
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
> Unable to retrieve file siupd or write to
> .\Cache\EXEDir\SysinfoUpg\Linux\siupd
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Severe">
> Application Object Error at 12/2/2008 10:05:50 AM on BMMSUS1 by BMMSUS1
> File Store Validation Failed.
> [2.4.1216] This application was unable to access the file due to a
> checksum failure. Source filename = siupd.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:50 AM" SEVERITY="Info">
> Updating cache file Colw32.exe as .\Cache\EXEDir\Client\Win32\Colw32.exe.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:54 AM" SEVERITY="Severe">
> Filestore checksum failure
>
> Filename: .\Cache\EXEDir\Client\Win32\Colw32.exe, Chksum calculated:
> 1, errno: 0
>
> Catalog (size: 2285840, chksum: 230582079), File (size: 2371856,
> chksum: 255767264)
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:54 AM" SEVERITY="Severe">
> Unable to retrieve file Colw32.exe or write to
> .\Cache\EXEDir\Client\Win32\Colw32.exe
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:54 AM" SEVERITY="Severe">
> Application Object Error at 12/2/2008 10:05:54 AM on BMMSUS1 by BMMSUS1
> File Store Validation Failed.
> [2.4.1216] This application was unable to access the file due to a
> checksum failure. Source filename = Colw32.exe.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:55 AM" SEVERITY="Severe">
> Collection Server Error at 12/2/2008 10:05:55 AM on BMMSUS1 by BMMSUS1
> Collection Server Initialization Failure
> [2.6.4] The Collection Server failed to initialize.
>
> Application Object Error at 12/2/2008 10:05:54 AM on BMMSUS1 by BMMSUS1
> File Store Validation Failed.
> [2.4.1216] This application was unable to access the file due to a
> checksum failure. Source filename = Colw32.exe.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:05:59 AM" SEVERITY="Info">
> The Process Controller has terminated.
> </EVENT>
>
> <EVENT AT="12/2/2008 10:06:16 AM" SEVERITY="Info">
> *** bmmsus1 *** One-minute Marker ***
> </EVENT>

Application initialization failure exception

I am unable to start the JSL/JREPSVR processes.I am getting the following error when i give tmboot command.Also find the ubbConfig file that I am using.
E:\bea\tuxedo9.1\samples\jolt\ToUpper>tmloadcf -y ubbToupper
E:\bea\tuxedo9.1\samples\jolt\ToUpper>tmboot -y
Booting all admin and server processes in E:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig
INFO: BEA Tuxedo, Version 9.1, 32-bit, Patch Level (none)
INFO: Serial #: 454493271161-2140437240256, Expiration 2007-02-15, Maxusers 100
INFO: Licensed to: BEA Evaluation Customer
Booting admin processes ...
exec BBL -A :
process id=2100 ... Started.
Booting server processes ...
exec DMADM -A :
process id=1040 ... Started.
exec JSL -- -n //GVC3ZA65:3052 -m10 -M50 -x10 :
CMDTUX_CAT:1685: ERROR: Application initialization failure
exec JREPSVR -A -- -W -P E:\bea\tuxedo\udataobj\jolt\repository\jrepository :
CMDTUX_CAT:1685: ERROR: Application initialization failure
exec WSL -A -e E:\bea\logs\stderr -o E:\bea\logs\stdout -- -n //GVC3ZA65:3051 -m 2 -M 10 -x 10 :
process id=4040 ... Started.
3 processes started.
UBBConfig file
#     (c) 2003 BEA Systems, Inc. All Rights Reserved.
#ident     "@(#) samples/atmi/simpapp/ubbsimple     $Revision: 1.5 $"
#Skeleton UBBCONFIG file for the TUXEDO Simple Application.
#Replace the <bracketed> items with the appropriate values.
*RESOURCES
IPCKEY          54321
#Example:
#IPCKEY          123456
DOMAINID     simpapp
MASTER          GVC3ZA65
MAXACCESSERS     20
MAXSERVERS     10
MAXSERVICES     10
MODEL          SHM
LDBAL          N
*MACHINES
DEFAULT:
          APPDIR="E:\bea\tuxedo9.1\bin"
          TUXCONFIG="E:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig"
          TUXDIR="E:\bea\tuxedo9.1"
          TLOGSIZE=100
          MAXWSCLIENTS=10
#Example:
#          APPDIR="/home/me/simpapp"
#          TUXCONFIG="/home/me/simpapp/tuxconfig"
#          TUXDIR="/usr/tuxedo"
"GVC3ZA65"      LMID=GVC3ZA65
#Example:
#beatux          LMID=simple
*GROUPS
DEFAULT: LMID=GVC3ZA65 OPENINFO=NONE
GROUP1
LMID=GVC3ZA65     GRPNO=1     OPENINFO=NONE
DMGROUP GRPNO=200
GWGROUP2 GRPNO=220
WSL_GRP GRPNO=800
JSLGRP GRPNO=95
JREPGRP GRPNO=94
*SERVERS
DEFAULT: GRACE=0 MAXGEN=10 RESTART=Y
DMADM SRVGRP=DMGROUP SRVID=10
#GWADM SRVGRP=GWGROUP2 SRVID=20
#GWTDOMAIN SRVGRP=GWGROUP2 SRVID=30 RQADDR="gwtdom2"
JSL SRVGRP=JSLGRP SRVID=31 CLOPT= " -- -n //GVC3ZA65:3052 -m10 -M50 -x10"
JREPSVR SRVGRP=JREPGRP SRVID=98 RESTART=Y GRACE=0 CLOPT="-A -- -W -P E:\bea\tuxedo\udataobj\jolt\repository\jrepository"
#JREPSVR SRVGRP=JREPGRP SRVID=97 RESTART=Y RQADDR=JREPQ REPLYQ=Y GRACE=0 CLOPT="-A -- -P E:\bea\tuxedo\udataobj\jolt\repository\jrepository"
#JREPSVR SRVGRP=JREPGRP SRVID=96 RESTART=Y RQADDR=JREPQ REPLYQ=Y GRACE=0 CLOPT="-A -- -P E:\bea\tuxedo\udataobj\jolt\repository\jrepository"
WSL SRVGRP=WSL_GRP SRVID=10
CLOPT="-A -e E:\bea\logs\stderr -o E:\bea\logs\stdout -- -n //GVC3ZA65:3051 -m 2 -M 10 -x 10"
#simpserv     SRVGRP=GROUP1 SRVID=1
*SERVICES
TOUPPER

Ajay,
Either you have forgotten to execute tmloadcf on your UBBCONFIG file or the
value of the TUXCONFIG environment variable is set to something different
than the value specified in the UBBCONFIG file.
In tmboot, the TUXCONFIG environment variable is set to
D:\bea\tuxedo9.1\samples\jot\ToUpper\tuxconfig , and tmboot cannot open this
file.
Ed
<Ajay Kumandan> wrote in message news:[email protected]...
Hi Todd,
Now Iam able to start the JSL process but JREPSVR process
is still not starting.I have the following snippet in my
UBBConfig file.
JSL SRVGRP=JSLGRP SRVID=31
CLOPT= "-A -- -n //GVC3ZA03TESTING:3052 -m1 -M1 -x5"
JREPSVR SRVGRP=JREPGRP SRVID=98 #RESTART=Y GRACE=0
CLOPT="-A -- -W -P D:\bea\tuxedo\udataobj\jolt\repository\jrepository"
#JREPSVR SRVGRP=JREPGRP SRVID=97 RESTART=Y RQADDR=JREPQ REPLYQ=Y GRACE=0
CLOPT="-A -- -P D:\bea\tuxedo\udataobj\jolt\repository\jrepository"
#JREPSVR SRVGRP=JREPGRP SRVID=96 RESTART=Y RQADDR=JREPQ REPLYQ=Y GRACE=0
CLOPT="-A -- -P D:\bea\tuxedo\udataobj\jolt\repository\jrepository"
Please find the ULOG file for reference
122101.GVC3ZA03TESTING!slisten.exe.6776.7476.-2: 01-31-2007: Tuxedo Version
9.1, 32-bit
122101.GVC3ZA03TESTING!slisten.exe.6776.7476.-2: CMDTUX_CAT:4323: INFO:
Listener Process Started
125326.GVC3ZA03TESTING!tlisten.9820.6620.-2: 01-31-2007: Tuxedo Version 9.1,
32-bit
125326.GVC3ZA03TESTING!tlisten.9820.6620.-2: CMDTUX_CAT:1468: INFO: Listener
Process Started
125530.GVC3ZA03TESTING!tmboot.2444.6484.-2: 01-31-2007: Tuxedo Version 9.1,
32-bit
125530.GVC3ZA03TESTING!tmboot.2444.6484.-2: LIBTUX_CAT:603: ERROR: TUXCONFIG
file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not exist
125530.GVC3ZA03TESTING!tmboot.2444.6484.-2: LIBTUX_CAT:588: ERROR: Unable to
open TUXCONFIG file
125530.GVC3ZA03TESTING!tmboot.2444.6484.-2: FATAL: internal error:
CMDTUX_CAT:754: ERROR: error processing configuration file
125530.GVC3ZA03TESTING!tmboot.2444.6484.-2: FATAL: internal error:
CMDTUX_CAT:1360: ERROR: configuration file not found
125549.GVC3ZA03TESTING!tmboot.5388.6568.-2: 01-31-2007: Tuxedo Version 9.1,
32-bit
125549.GVC3ZA03TESTING!tmboot.5388.6568.-2: LIBTUX_CAT:603: ERROR: TUXCONFIG
file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not exist
125549.GVC3ZA03TESTING!tmboot.5388.6568.-2: LIBTUX_CAT:588: ERROR: Unable to
open TUXCONFIG file
125549.GVC3ZA03TESTING!tmboot.5388.6568.-2: FATAL: internal error:
CMDTUX_CAT:754: ERROR: error processing configuration file
125549.GVC3ZA03TESTING!tmboot.5388.6568.-2: FATAL: internal error:
CMDTUX_CAT:1360: ERROR: configuration file not found
131834.GVC3ZA03TESTING!tmboot.9840.5780.-2: 01-31-2007: Tuxedo Version 9.1,
32-bit
131834.GVC3ZA03TESTING!tmboot.9840.5780.-2: LIBTUX_CAT:603: ERROR: TUXCONFIG
file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not exist
131834.GVC3ZA03TESTING!tmboot.9840.5780.-2: LIBTUX_CAT:588: ERROR: Unable to
open TUXCONFIG file
131834.GVC3ZA03TESTING!tmboot.9840.5780.-2: FATAL: internal error:
CMDTUX_CAT:754: ERROR: error processing configuration file
131834.GVC3ZA03TESTING!tmboot.9840.5780.-2: FATAL: internal error:
CMDTUX_CAT:1360: ERROR: configuration file not found
132154.GVC3ZA03TESTING!tmboot.8724.10076.-2: 01-31-2007: Tuxedo Version 9.1,
32-bit
132154.GVC3ZA03TESTING!tmboot.8724.10076.-2: LIBTUX_CAT:603: ERROR:
TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not
exist
132154.GVC3ZA03TESTING!tmboot.8724.10076.-2: LIBTUX_CAT:588: ERROR: Unable
to open TUXCONFIG file
132154.GVC3ZA03TESTING!tmboot.8724.10076.-2: FATAL: internal error:
CMDTUX_CAT:754: ERROR: error processing configuration file
132154.GVC3ZA03TESTING!tmboot.8724.10076.-2: FATAL: internal error:
CMDTUX_CAT:1360: ERROR: configuration file not found
132234.GVC3ZA03TESTING!tmboot.7108.8460.-2: 01-31-2007: Tuxedo Version 9.1,
32-bit
132234.GVC3ZA03TESTING!tmboot.7108.8460.-2: LIBTUX_CAT:603: ERROR: TUXCONFIG
file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not exist
132234.GVC3ZA03TESTING!tmboot.7108.8460.-2: LIBTUX_CAT:588: ERROR: Unable to
open TUXCONFIG file
132234.GVC3ZA03TESTING!tmboot.7108.8460.-2: FATAL: internal error:
CMDTUX_CAT:754: ERROR: error processing configuration file
132234.GVC3ZA03TESTING!tmboot.7108.8460.-2: FATAL: internal error:
CMDTUX_CAT:1360: ERROR: configuration file not found
132331.GVC3ZA03TESTING!tmboot.6160.2752.-2: 01-31-2007: Tuxedo Version 9.1,
32-bit
132331.GVC3ZA03TESTING!tmboot.6160.2752.-2: LIBTUX_CAT:603: ERROR: TUXCONFIG
file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig does not exist
132331.GVC3ZA03TESTING!tmboot.6160.2752.-2: LIBTUX_CAT:588: ERROR: Unable to
open TUXCONFIG file
132331.GVC3ZA03TESTING!tmboot.6160.2752.-2: FATAL: internal error:
CMDTUX_CAT:754: ERROR: error processing configuration file
132331.GVC3ZA03TESTING!tmboot.6160.2752.-2: FATAL: internal error:
CMDTUX_CAT:1360: ERROR: configuration file not found
152528.GVC3ZA03TESTING!tlisten.9820.6620.-2: CMDTUX_CAT:4209: INFO: Accepted
request from //127.0.0.1:4553, seq # 1
152655.GVC3ZA03TESTING!slisten.exe.6776.7476.-2: CMDTUX_CAT:4209: INFO:
Accepted request from //10.226.65.102:4554, seq # 1
153804.GVC3ZA03TESTING!slisten.exe.6776.7476.-2: CMDTUX_CAT:4209: INFO:
Accepted request from //10.226.65.102:4580, seq # 2
164453.GVC3ZA03TESTING!slisten.exe.6776.7476.-2: CMDTUX_CAT:4209: INFO:
Accepted request from //10.226.65.102:4959, seq # 3
164758.GVC3ZA03TESTING!jsh.4900.7868.-2: 01-31-2007: Tuxedo Version 9.1,
32-bit
164758.GVC3ZA03TESTING!jsh.4900.7868.-2: JOLT_CAT:1034: "ERROR: Failed to
attach to shared memory for listener table, errno = 22"
164831.GVC3ZA03TESTING!JSH.exe.5084.2480.-2: 01-31-2007: Tuxedo Version 9.1,
32-bit
164831.GVC3ZA03TESTING!JSH.exe.5084.2480.-2: JOLT_CAT:1034: "ERROR: Failed
to attach to shared memory for listener table, errno = 22"
Thanks and Regards,
Ajay

Initialization failure - qe, caught signal 15

Please could you help me ?
The OMQ is not running any more.
Now when I try to start the group, It has got a error 'signal 15'
The OS is
$ cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.8 (Tikanga)
LOG
************ dmqgcp (4985) 24-MAR-2014 10:32:33 ************
gcp, group control process for group 126 is running
************ dmqqe (4987) 24-MAR-2014 10:32:33 ************
qe, queuing engine is running
************ dmqgcp (4985) 24-MAR-2014 10:32:33 ************
ipi, message queue operation failed
************ dmqgcp (4985) 24-MAR-2014 10:32:33 ************
gcp, initialization failure
************ dmqqe (4987) 24-MAR-2014 10:32:33 ************
qe, caught signal 15
************ dmqqe (4987) 24-MAR-2014 10:32:33 ************
qe, queuing engine is exiting
************ dmqgcp (4985) 24-MAR-2014 10:32:33 ************
gcp, group control process for group 126 is exiting
TRACE
Start DMQ Processes - start procedura data: (Mon Mar 24 10:32:33 BRT 2014) nodo: snelnxa113.internal.timbrasil.com.br
%STARTUP-I-STARTING, dmqgcp -b 21 -g 126 -f /BECbmq/dmqdir/group/init/GROUP_126.init -n GROUP_126 -l /BECbmq/dmqdir/group/log/GROUP_126.log
IPI 04985:IPI-initializing
IPI 04985:IPI-using bus id 21, group id 126
IPI 04985:IPI-IPIattach_resources
IPI 04985:IPI-attaching ipc queues
IPI 04985:IPI-IPI_engine_write
IPI 04985:IPI-number of bytes to write, 288 (120)
IPI 04985:IPI-IPI_engine_write status
IPI 04985:IPI-IPI_engine_read
IPI 04985:IPI-number of bytes read, 288 (120)
IPI 04985:IPI-IPI_engine_read status
IPI 04985:QE -error status in response to process connect, -256 (FFFFFF00)
IPI 04985:IPI-initialization failure, -43 (FFFFFFD5)

Solved itself after kernel upgrade.

AS2 adapter failure: Initialization failure

Hi experts,
We had a message in RWB with this error:
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # com.seeburger.dt.security.smime.SMIMEHelper (initialization failure), SEEBURGER AS2: AS2 Adapter failure # com.seeburger.dt.security.smime.SMIMEHelper (initialization failure)
Exception caught by adapter framework: Fatal exception: com.sap.aii.af.ra.cci.XIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # com.seeburger.dt.security.smime.SMIMEHelper (initialization failure), SEEBURGER AS2: AS2 Adapter failure # com.seeburger.dt.security.smime.SMIMEHelper (initialization failure)
Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # com.seeburger.dt.security.smime.SMIMEHelper (initialization failure), SEEBURGER AS2: AS2 Adapter failure # com.seeburger.dt.security.smime.SMIMEHelper (initialization failure): javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIDeliveryException: SEEBURGER AS2: AS2 Adapter failure # com.seeburger.dt.security.smime.SMIMEHelper (initialization failure), SEEBURGER AS2: AS2 Adapter failure # com.seeburger.dt.security.smime.SMIMEHelp
There weren't any errors from sxmb_moni, tried checking the com channels and they seem to be working fine. Any help would be appreciated, thanks in advance.
Regards,
Donnie

Hi Doonie
Please check your system cache
Please go through this blog
Seeburger AS2 Adapter No binding found for: AS2, http://seeburger.com/xi
Thanks
Abhishek
**Reward points if helpful**

Process chain failures...

Hi Gurus,
Can someone please send me a link which has got some common process chain failure issues with the resolutions....
Thanks & Regards.
Pawan.

Hi,
Common Errors can be like
1. SID Failure while loading data.
2. Activation Failure.
3. Idoc failure
4. Failure in Source System.
5. Table space issue while loading.
6.No SID found for a characteristics
7.No Data found in the soucre system
8.DATASET Errors: Short dump with Various DATASET errors
9.Hierarchy load fails with error Incorrect Hierarchy Structure with Consistency Check / NodeID XXXXX not included in the Hierarchy.
10.Invalid character error
11.File not found (System Command for file check failed).
12.Error occurred due to Short Dump.
13.Attribute Change Run failed - ALEREMOTEBW was locked.
Thanks,
Nagesh.
Edited by: Nagesh Mule on Jan 30, 2008 7:19 AM

Fileopen Initialization Failure(2)

I receently updated both Acrobat 8 standard and Adobe Reader 9 up to their latest versions. Whenever I open a PDF with either product I get the following message
Fileopen Initialization Failure(2) you will not be able to open protected documents. I am an admin on my system. Anyone have an idea what is going on? I searched the forums and did not find anything related to this issues. Everything worked fine before patching. OS is windows XP SP3 - no microsoft silverlight installed ( I found silverlight could casue much weirdness with Acrobat)

Somehow a version of the fileopen api that was 5 years old was installed in reader directory and the acrobat standard dir. All I did was path the programs and wham error started. I went to the fileopen site and the promptly solved my issue.
Here is their solution
If you aren’t concerned about opening documents using the plug-in you can remove it by finding and deleting all instances of fOpen32.api; as I mentioned, that plug-in was discontinued a long time ago (and our installer only dispenses the current one).
Good job Bernd point me in the right direction
Thanks

Remote Desktop disconnects immediately. Error 4005; Windows logon process has unexpectedly terminated.

Hi, I have always been able to remote into my pc (Win 8.1) using remote desktop. Just recently this stopped working. Either I get a blank screen for about 10 seconds and then it closes or the connection closes immediately. Every time this happens I get error
4005 in the event log; Windows logon process has unexpectedly terminated. It seems the remote desktop stopped working after the last set of Windows updates were applied. But no other web searches indicates anyone else has had this problem recently. I've also
read the Windows Server document or error 4005 which suggests my registry may be corrupt or a service may be stopped but this does not seem to apply to my situation. I'm stumped and without being able to remote into my pc from my office I can't do my job.
Any suggestions would be greatly appreciated.
UPDATE: After installing a new required Windows update and a bunch of optional Windows updates (that I had been ignoring), the problem has been fixed. I'm guessing which ever Windows update broke Remote Desktop was fixed in the latest update(s).

Hi arzoo1,
So you have checked the steps mentioned in the article below?
Event ID 4005 — Windows Logon Availability
You may take a try with Dism /online /cleanup-image /resorehealth command and then check if issue insists.
For Windows Update related, please consider system restore or startup repair.
Try to boot into clean boot and then remote again to check if issue insists.
Best regards
Michael Shao
TechNet Community Support

Microsoft // Winlogon 4005 (The Windows logon process has unexpectedly terminated) on one Windows Server 2012 VM with working RDS roles installed

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

Re: win7 (prof edition) hd failure

Just an update.
I believe some EVIL beings from some powerful organization has totally hijacked my Lenovo laptop. Now the F1 key would not bring up the BIO setup menu, instead, it asked if I want to boot to Windows 7. Windows update for .NET Framework 4 failed. Previously I fixed. Now it's gone again.
These [mod edit] despicable evil beings are most likely from a government. An individual would not have such motivation.
Moderator note: This message regarding a hijack has been moved to Security & Malware from the original discussion: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/win7-prof-edition-hd-failure/td-p/123610...

Hello,
My general rule of thumb when encountering these types of issues is to get on the phone with your anti-malware software vendor's technical support department. They are likely best able to investigate and troubleshoot issues you think may be related to malware (whether from governments, criminal organizations or just garden-variety hackers).
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Process chain failure due to weekly maintanence

Hi experts,
we have BI sytem shutdown every week ok sundays due weekly system maintanence.In that process we have few process chain failure as well as batch job failures and each time we have to fix it by manual loading of data.
Any one help me fixing it once for ever.
Thanks for your help.
Thanks
Smitha.

Hi,
Is ur PC running when the system is shut down?? if yes then u have to fix manually...The best practice is to finish off the loads before the system is shut down. Make sure that all the deltas are pulled before the system is down..
try this for restarting PC
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
after cleaning up all the datatargets u can restart it as mentioned in the above link...
Regards,
B

Unable to connect to Oracle Discover Application: ORB Initialization failure

We are running Discoverer 4.1.37 in a DMZ. Some of our internal users receive a "Unable to connect to Oracle Discoverer Application: ORB Initialization failure ..." error when trying to use Discoverer Plus. Our external users are able to connect using Discoverer Plus. We have SSL and Gatekeeper was configured with the machine's IP address (Exterior address), port 443 (exterior port), and exterior proxy address. Networking changes were made to enable users to use one web address instead of two (one for external and one for internal). Also, if I trying to use the machine's IP address in the web address, Discoverer just says "Loading" in the Discoverer Plus status box. If I use the one web address (originally, the external web address), I can log into Discoverer.

How are you trying to connect the database using JPA?
Has your datasource got bind successfully. You should check all these things first. If your datasource has not got binded then debug for that.

G550 (Win7) Logon Process Initialization Failure

Similar Messages

Maybe you are looking for