G560: how to enable virtualiza​tion?

How to enabble the virtualization in the mother board
Moderator note: post moved to its own thread.  Subject edited to match content.
Solved!
Go to Solution.

Hi pallabmukherjee,
Thanks for posting. Just to confirm with you, when you say enabling the virtualisation. Do you mean enabling the Intel Virtual Technology? If you're aiming to do this you can do so by going into your BIOS.
Please see illustration below.
Hope this helps.
Regards

Similar Messages

  • How to enable Virtualiza​tion ( AMD-V ) on G40-45 ?

    hey, I am a new user lenovo laptop , and I was confused when there is a software asks me to activate hadrware virtualization ,
    I have searched for information on the internet , and there is said must pass the BIOS but when I open the BIOS did nothing , not found that virtualization
    Please help me, Lenovo G40-45 amd a8 64410 APU , windows 8.1 thx
    Solved!
    Go to Solution.

    hi caniggiareza,
    Welcome to Lenovo Community Forums!
    The Processor indicates that it is capable of VT 
    Hardware Virtualization
    VT
    Can You try disabling this Hyper V and try running your Software Again.
    Disabling HyperV
    Let me know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Enable virtualiza​tion

    Hi,
    I have a Pavilion DV7-2260ed. It has the Intel Core 2 Duo CPU T6600 @ 2.20GHz. It has hardware virtualization, but Virtual PC's detection application warns that the capability is disabled in the BIOS.
    My BIOS does not have an option to enable it.
     I have read on fora that the advanced options in the bios can be enabled. However, for this specific model there is no Flash file available.
    What can I do?
    Thank you,
    Kasper

    Hi Lisa,
    I think i have found out what the problem is. On these two sites, i found my answer. 
    http://forum.notebookreview.com/hp-pavilion-notebo​oks/595505-current-hp-pavilion-bios-releases-13.ht​...
     Originally Posted by GreenFnatic 
    Hello,
    I'm the owner of a HP Pavilion Dv7-2215eb. The latest firmware is F.46. And i've updated to this one. 
    In the bios however I do not have the option to enable VT (Virtualization Technology). I've read some forums and apperently it's possible is some bios'es, and in some it's just not possible. I need it to be enabled for school, so this is a serious issue.
    Any solutions?
    Thanks in advance,
    GreenFnatic
    In your case, it is not possible for you to enable Intel VT because the CPU does not support this feature. (Your dv7-2215eb has an Intel Core 2 Duo T6600.)
    http://ark.intel.com/Products/VirtualizationTechno​logy
    Processor Family Supports Intel® VT-x Supports Intel® EPT                                                                     
    Intel® Core™2 Duo Processor T6000 Series T6670 T6570 Yes No T6600 T6500 T6400No No 
    It seems that my T6600 Duo core processor is unable to support VT-x.
    I do not have the enable Virtualization Technology option in my BIOS and also do not know how and if I can enable the advanced options. But now, I think it is not necessary anymore.
    Thank you for your reply though.
    kind regards,
    Kasper

  • U330 bios doesn't enable virtualiza​tion techonolog​y mode?

    Can any one from lenovo tell me why U330 bios doesn' t have virtualization technology enable?
    My work MUST use the VMware. Can any one tell me how to enable it?
    It 's very serious problem for me.
    Regrad
    Boombalaka

    Ricky119,
    We can inquire further, but the IdeaPad product line does not support VT presently.  As it is not marketed as specifically having this feature, this will likely be seen as a future requirement rather than a bug to fix.
    Best regards,
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Satellite Z930 with Win 8 - How to enable virtualization?

    Dear Support,
    I bought yesterday a Toshiba Satellite Z930/01E with 3rd Generation Intel ULV Core i5-3337u 1.8 GHz - 2.7 GHz
    The hardware is beautiful but the software windows 8 basic is a piece of rubish, I'm a heavy computer user I need to run several virtual machines in my current laptop a dell xps 15 in a normal day I have 2 windows xp + linux + windows 7,
    I spent my day yesterday trying to get working virtualbox or vmware player on windows 8 on this laptop
    and it doesn't work at all, can anyone please tell me if you are using any virtualization software on this laptop ?and if you are what is the trick ??
    How do we enable virtualization on this laptop ??
    Please help I'm considering in returning this latop and get instead a mac, I got enough issues with windows just to run such a basic application.
    Thanks
    Ivan
    Message was edited by: ivanoch79nnn\

    After restarting the pc several times change every single paramenter in the bios and restore to factory defaults
    its working now thanks for nothing.

  • B490 : How to enable virtualization technology in BIOS?

    Hi,
    I have Lenovo B490 machine and i need to enable virtulaization technology for using virtual box. However i do not see this option under security tab in BIOS.
    My BIOS version is : H5ET40WW(1.13)
    Please let me know how to get this working.
    Thanks,
    Kesavan

    hi kesavan,
    Welcome to Lenovo Community Forums!
    Try Checking the Options under, Configuration TAB
    Try looking for Virtual technology option,
    You can refer to this thread
    http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Enable-Hardware-virtualization-on-y510p/m-p...
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to enable virtualization technology

    hello
    I'm working on toshiba satellite L850-b404 laptop with intel i5-3210m processor which shows the intels' website that it supports virtualization technology
    http://ark.intel.com/products/67355/Intel-Core-i5-3210M-Processor-3M-Cache-up-to-3_10-GHz-rPGA
    Also virtualization technology is enabled in my bios settings.
    But I can't run virtual machine properly I'm using virtual box and getting this message
    "VT-x/AMD-V hardware acceleration is not available on your system. Certain guests (e.g. OS/2 and QNX) require this feature and will fail to boot without it."
    Plus when i run intel (R) Processor Identification Utility it's shows me no next to virtualization technology
    Any suggestions?
    Solved!
    Go to Solution.

    hello
    I solved the problem by turning off Hyper-V:
    Control panel >> Programs and features >> Turn windows feature on or off >> uncheck Hyper-v
    Restart PC and works fine.

  • How to enable virtualization on Satelite Pro U200

    Hi, I have satelite pro with Intel(R) Core(TM)2 CPU T5600 processor. I'm 100% sure, that it have virtualization support.
    So the question is: Is there (or why not) any possibility to enable the virtualization in bios? I need to run 64b OSes under vmware server and for this is the virtualization needed. :(

    Hi
    If virtualization option is not available in BIOS settings I am afraid there is no much to do.
    Interesting discussion about Virtualization you can find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18827&messageID=68756
    Bye

  • MOVED: how to enable "Virtualization" for my PC?

    This topic has been moved to Off-Topic Technical.
    https://forum-en.msi.com/index.php?topic=135319.0

    Which CPU is installed?
    That will etermine whether or not it is even an option in the BIOS.
    The following images are from preproduction BIOSes and serve only as examples. 
    With an eligible Intel CPU it should be in the System Configuration menu in the BIOS.
    With an eligible AMD processor it is called SVM (secure virtual machine) and it is also in the System Configuration menu of the BIOS.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How Enable Virtualization Technology in HP Mini 110

    How to enable Virtualization Technology in HP Mini 110 ?
    I want to install some OS in VirtualBox, And i want to enabled VT for share 2 CPU. Generally, this can be enabled in BIOS but HP Mini BIOS does not have any option to do this. Even i was update my BIOS.
    I would like to know the way to enable VT on my HP MINI 110, Intel Atom N570 1.66 GHz processor.
    Thanks in advance.
    This question was solved.
    View Solution.

    The Atom N570 processor does not have VT, so it is not possible
    http://ark.intel.com/products/55637

  • I Want to Access BIOS on ThinkCentre M Series to enable virtualization

    My Operating System is W-7 Pro and I want to install XP Mode, only I think I need virtualization enabled in the BIOS.
    After powering up, the following don't give access to the BIOS:
    F1
    F2
    Ctrl+ Alt + F3
    Ctrl + Alt + Ins
    F1 + F2
    Does anyone know how to access  the BIOS in this machine?
    According to the Registry Key this computer has Lenovo BIOS Version 5JKT55AUS.
    How to enable virtualization is another question, but first I want to get into the BIOS.
    Thank you
    Solved!
    Go to Solution.

    Hello,
    Thank you BiggAl (Guru) for responding. Sorry about the delay in my getting back, I am in school, hence little time.
    You were 100% correct, once I connected a wired keyboard, F1 accessed the BIOS reliably.
    Now my problem is that I don't see where in the BIOS to enable "virtualization" mode.
    Can some one tell me how?
    Thank you

  • Enabling Virtualization on a 970A-G46?

    I've been trying to figure out how to enable Virtualization.
    My BIOS version is V1.11/20121031.
    My CPU is a AMD FX-8120 (Which supports AMD-V).
    I'm using the GUI Click Bios 2.
    My goal is to run create and run a Linux Ubuntu VM using virtual box for development. Is it possible?

     
    Got it. I'm dumb. I enabled IOMMU in click BIOS. Got to create the VM and it's installing UBUNTU. Works well - so far. We'll see how it runs.

  • How to enable hardware-a​ssisted virtualiza​tion on a Pavilion dv4 1135ee

    How to enable hardware-a​ssisted virtualiza​tion on a Pavilion dv4 1135ee
    My biaos are not supported is any option to enable vitrualization???????????????????

    Have you installed the latest BIOS?
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-84257-1&cc=us&dlc=en&lc=en&...
    These fix a battery charging issue and have several other important fixes from previous updates rolled in. However, the real problem you will face is that the P7350 processor standard in that machine does not support virtualization.
    http://ark.intel.com/products/36750/Intel-Core2-Duo-Processor-P7350-%283M-Cache-2_00-GHz-1066-MHz-FS...

  • How to - enable - multi touch - in windows 7 ultimate - for my G560 touchpad

         I and my friend have the lenovo G560 laptops. I am running windows 7 ultimate and my friend is running ubuntu 11.04 OS in our laptops.
    In Ubuntu: The multi touch is enabled by default for the laptop touch-pad. For vertical scrolling, we can use two fingers to navigate.
    In Windows 7 Ultimate: I don't know how to enable this multi-touch feature.
    Your help is very much appreciated.
    Thanks in advance.

    control panel > hardware and sound > mouse > mouse properties > device settings > settings ( if you have synaptic mouse )
    if you don't synaptic, check the mouse properties to enable/disable the features you'd like to.

  • Satellite U500 - How to enable Intel virtualization technology?

    How to enable Intel Virtualization Technology on Satellite U500 or if this feature is already available or not because im VMware configure in my laptop and when I wont to run it I'm getting the message
    *You have configured this virtual machine to use a 64-bit guest operating system. However, 64-bit operation is not possible. This host does not support VT.*
    By the way my Laptop is Core2duo, Windows 7 Home Premium 64bit, RAM 3GB

    Hi hersi,
    Yes, thats the important model number.
    According the Toshiba website your model has Intel Core2Duo T6600 CPU. So I have checked the Intel page directly and T6600 CPU doesnt support Intel Virtualization Technology (VT-x). You can check this yourself:
    http://ark.intel.com
    Unfortunately there is no option to enable Virtualization :(

Maybe you are looking for

  • Button order and routing from PS menu not working

    Ugh, this is driving me crazy. When authoring a Blu-ray, I've gone through the same steps since I started but all of a sudden the menus I'm creating in PS CS5 for Encore CS5 are not working and for the life of me I can't figure out why. The problem I

  • How to identify listeners types for forms, items and events in addon wizard

    Dear users, I have developed a sample addon through B1DE wizards and successfully installed and connected the addon and can view menu and form of my addon. Since i am new to this, i didn't add any listeners to my form, items and events because i don'

  • Swing and jsp

    hello world i have a projet web application with jsp. how integrate swing in jsp? thank you in advance

  • ITunes 12.1.1.4 wont recognize iphone

    I just updated iTunes to 12.1.1.4 and now when i plug my iphone into my laptop it doesn't show up on iTunes. Any help would be great.

  • PE Slideshow output closes at 42% with error message

    I created a slideshow in the Organizer this summer from my PE 7.0 and it worked great. Now, I'm trying to do a new slideshow and when I output the file whether to a disc or as a file, it stops at 42% with a Microsoft Error message that the program ha