G570 failed again

I have a Lenovo G570 with the ATI Radeon GPU which has failed twice in the same way. The first time it was still in warrany and was repaired by Lenovo, this time I am looking to fix it myself.
Both times the problem appears to be that the GPU solder joints to the motherboard failed. Once this happens, the computer usually does not even reach POST, but if it does, the graphics are flickery and do not show the whole screen. Lenovo replaced the entire board when the first failure occured (about 10 months after purchase), the second failure occured less than six months later.
Has anyone else had this problem with the G570 or similar Lenovo laptops? Have I just been unlucky or is this a design flaw in the machine? When the computer is working I love it, but if fails every six months it's not that useful. Is there anything I can do to reduce the likelihood of this problem reoccuring if I get the laptop repaired?

Hello everyone, I suppose I have the same problem, but not sure yet, only just understand it. In my notebook I can't set driver in the integrated MB GPU 3000 HD graphics. the Notebook works only with independent AMD ATI Radeon GPU. At the moment I'm trying to find diagnostic software to confirm my opinion about failed Intel GPU.

Similar Messages

Here we go again,....iTunes update for Windows 7 fails again same problem as back in Feb update

Why is it that Apple is failing to get it right lately with their updates?
Tried to install latest iTunes for Windows update on my PC Win 7 and it fails again wioth same error messages as with the previous update in Febr.
Sooo very disappointed!!!!!
To go thru all this again is taking me a few hours again to fix this problem assuming it works again this time, maybe I should just give up on iTunes instead.
Troubleshooting issues with iTunes for Windows updates
really *****,
NE1 have any suggestions for an easy fix?
thanks

First off the automatic install fails nothing happens.
Then tried the manual install after download, get the message that Apple mobile service failed to start and make sure i have required privileges to do so(Total BS)
the SetupAdmin.exe file does not provide any action.
Then right clicked the iTunes6464.msi file and installed it. Seems to install the update but when iTunes starts get the: "error 7" msg with iTunes helper was not installed correctly. Please reinstall iTunes. then w're in that **** loop......LOL
I believe this is because I have a 4 yr old laptop with old graphic card.

I can purchase apps but whenever i'm trying to make in app purchase its failing again and again

i can purchase apps but whenever i'm trying to make in app purchase its failing again and again

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Operations Manager 2012 Reporting Service installation failed again

Hi dear guys.
i'm an administrator in a company. and our company decided to have monitoring tools for our servers located in two sites.
i started installation of SCOM in Two servers: 1- SQL server 2-Management server, Operations Console, Web Console
all MP's that needed has been installed and configuration completed successfully. then i decided to have Reporting Server too.i did proper tasks and started it with coordination of DBA team. but because of miss configuration in SSRS installing failed. after
repairing SSRS by them installation failed again but reporting Icon appeared in Management console
because of too many communication with DBA team, I installed a SQL server on a separate server(Full Featured) and configured SSRS too. and then started installing SCOM reporting on this server. but it again failed.

I wanted to send whole log but 60000 is maximum allowable character. here's some logs with error event:
[13:27:30]:
Error:     :ImportManagementPack: MP already imported so skip : C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\Microsoft.SystemCenter.Reports.Deployment.mp
[13:27:30]:
Error:     :ImportManagementPack: MP already imported so skip : C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\ODR.mp
[13:27:32]:
Error:     :ImportManagementPack: Error: Unable to load management pack C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP
Found error in 1|System.NetworkManagement.Reports/31bf3856ad364e35|1.0.0.0|System.NetworkManagement.Reports.MemoryUtilization|| with message:
Failed to verify LinkedReport parameter: Name=OptionList, Value......
[13:27:32]:
Error:     :ImportManagementPack: Unknown Error. System.ArgumentException : The requested management pack is not valid. See inner exception for details.
Parameter name: managementPack
[13:27:32]:
Always: :FirstManagementServer: Failed to load MP C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP.
We will retry.
[13:27:32]:
Always: :ImportManagementPack: Loading management pack C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP. 13:27:32
[13:27:32]:
Error:     :ImportManagementPack: Error: Unable to load management pack C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP
[13:27:34]:
Error:     :Error:FirstManagementServer: Failed to load MP C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP on retry number 3
[13:27:34]:
Error:     :Error:FirstManagementServer: Gave up trying to load the MP C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP
[13:27:34]:
Error:     :Error:failed to import Reporting management packs. This is a fatal error
[13:27:34]:
Error:     :FATAL ACTION: ConfigureReportingForInstall
[13:27:34]:
Error:     :ProcessInstalls: Running the PostProcessDelegate returned false.
[13:27:34]:
Always: :SetErrorType: Setting NonVitalFailure. currentInstallItem: Reporting Server
[13:27:34]:
Error:     :ProcessInstalls: Running the PostProcessDelegate for OMREPORTING failed.... but this item is not fatal so we will process the other items.

Backup failed again

SunOS 5.8
$ rman target /
Recovery Manager: Release 9.2.0.6.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: MLQA (DBID=1439070802)
RMAN> run {
2> shutdown immediate;
3> startup mount;
4> backup database;
5> sql 'alter database open';
6> }
using target database controlfile instead of recovery catalog
database closed
database dismounted
Oracle instance shut down
connected to target database (not started)
Oracle instance started
database mounted
Total System Global Area 840404224 bytes
Fixed Size 732416 bytes
Variable Size 301989888 bytes
Database Buffers 536870912 bytes
Redo Buffers 811008 bytes
Starting backup at 06-MAY-08
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=11 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=12 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00019 name=/data1/oradata/mlqa/da_rating_01.dbf
input datafile fno=00035 name=/data2/oradata/mlqa/ind_general_02.dbf
input datafile fno=00041 name=/data2/oradata/mlqa/da_mediation_02.dbf
input datafile fno=00033 name=/data2/oradata/mlqa/ind_mediation_01.dbf
input datafile fno=00038 name=/data2/oradata/mlqa/da_usage02_02
input datafile fno=00061 name=/data4/oradata/mlqa/da_general_05.dbf
input datafile fno=00048 name=/data4/oradata/mlqa/da_usage6_02
input datafile fno=00053 name=/data4/oradata/mlqa/da_usage02_06
input datafile fno=00042 name=/data3/oradata/mlqa/da_general_04.dbf
input datafile fno=00062 name=/data3/oradata/mlqa/da_usage4_03
input datafile fno=00063 name=/data3/oradata/mlqa/da_usage05_03
input datafile fno=00037 name=/oracle/ora926/dbs/c:oracledusage
input datafile fno=00024 name=/data1/oradata/mlqa/da_general_03.dbf
input datafile fno=00022 name=/data1/oradata/mlqa/da_general_01.dbf
input datafile fno=00023 name=/data1/oradata/mlqa/da_general_02.dbf
input datafile fno=00002 name=/data1/oradata/mlqa/undotbs01.dbf
input datafile fno=00018 name=/data1/oradata/mlqa/da_usage01_01.dbf
input datafile fno=00020 name=/data1/oradata/mlqa/da_mediation_01.dbf
input datafile fno=00001 name=/data1/oradata/mlqa/system01.dbf
input datafile fno=00012 name=/data1/oradata/mlqa/df_data_01.dbf
input datafile fno=00025 name=/data1/oradata/mlqa/da_fits_01.dbf
input datafile fno=00021 name=/data1/oradata/mlqa/da_lob_01.dbf
input datafile fno=00046 name=/data1/oradata/mlqa/inf_usage02_02.dbf
input datafile fno=00008 name=/data1/oradata/mlqa/tools01.dbf
input datafile fno=00013 name=/data1/oradata/mlqa/da_usage06_01.dbf
input datafile fno=00005 name=/data1/oradata/mlqa/example01.dbf
input datafile fno=00014 name=/data1/oradata/mlqa/da_usage05_01.dbf
input datafile fno=00015 name=/data1/oradata/mlqa/da_usage04_01.dbf
input datafile fno=00016 name=/data1/oradata/mlqa/da_usage03_01.dbf
input datafile fno=00017 name=/data1/oradata/mlqa/da_usage02_01.dbf
input datafile fno=00029 name=/data1/oradata/mlqa/ind_usage03_01.dbf
input datafile fno=00030 name=/data1/oradata/mlqa/ind_usage02_01.dbf
channel ORA_DISK_1: starting piece 1 at 06-MAY-08
channel ORA_DISK_2: starting full datafile backupset
channel ORA_DISK_2: specifying datafile(s) in backupset
input datafile fno=00034 name=/data2/oradata/mlqa/ind_general_01.dbf
input datafile fno=00060 name=/data4/oradata/mlqa/ind_usage01_02
input datafile fno=00050 name=/data4/oradata/mlqa/da_usage03_02
input datafile fno=00057 name=/data4/oradata/mlqa/ind_usage5_02
input datafile fno=00043 name=/data1/oradata/mlqa/da_usage02_03.dbf
input datafile fno=00010 name=/data1/oradata/mlqa/xdb01.dbf
input datafile fno=00006 name=/data1/oradata/mlqa/indx01.dbf
input datafile fno=00009 name=/data1/oradata/mlqa/users01.dbf
input datafile fno=00003 name=/data1/oradata/mlqa/cwmlite01.dbf
input datafile fno=00004 name=/data1/oradata/mlqa/drsys01.dbf
input datafile fno=00007 name=/data1/oradata/mlqa/odm01.dbf
input datafile fno=00040 name=/data2/oradata/mlqa/da_rating_02.dbf
channel ORA_DISK_2: starting piece 1 at 06-MAY-08
channel ORA_DISK_1: finished piece 1 at 06-MAY-08
piece handle=/rmanbackup/MLQA/backup_db_MLQA_S_78_P_1_T_654004418 comment=NONE
channel ORA_DISK_1: starting piece 2 at 06-MAY-08
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/06/2008 11:55:
58
ORA-19502: write error on file "/rmanbackup/MLQA/backup_db_MLQA_S_78_P_2_T_65400
4418", blockno 27393 (blocksize=8192)
ORA-27063: skgfospo: number of bytes read/written is incorrect
Additional information: 1024000
Additional information: 1048576
RMAN>
From the previous qoutes:
RMAN-00571: | RMAN-00569: | RMAN-00571: | RMAN-03009: | ORA-19504: |
I did another backup and it failed again
what do i do next?
The above is the output of the error.
This is the configuration below;
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/rmanbackup/MLQ
A/%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '/rmanbackup/MLQA/backup_db_%d_S_%
s_P_%p_T_%t' MAXPIECESIZE 1024 M;
CONFIGURE CHANNEL 2 DEVICE TYPE DISK FORMAT '/rmanbackup/MLQA/backup_db_%d_S_%
s_P_%p_T_%t' MAXPIECESIZE 1024 M;
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/ora926/dbs/snapcf_MLQA.f'; # def
ault
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of show command at 05/06/2008 12:04:23
RMAN-20021: database not set
RMAN-06031: could not translate database keyword
RMAN>

RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/oracle/rmanbackup/MLQA/%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '/oracle/rmanbackup/MLQA/backup_db_%d_S_%s_P_%p_T_%t' MAXPIECESIZE 1024 M;
CONFIGURE CHANNEL 2 DEVICE TYPE DISK FORMAT '/oracle/rmanbackup/MLQA/backup_db_%d_S_%s_P_%p_T_%t' MAXPIECESIZE 1024 M;
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/ora926/dbs/snapcf_MLQA.f'; # default
RMAN>
The above is the current setting
Tell me if everything is ok with the setting.
Do i have to CONFIGURE BACKUP OPTIMIZATION ON; wdat does it do?
Also if I do df -f /oracle is 90% what can i do to reduce it.It is in noarchivelog mode.
Regards

Hii,,, i am using iphone 3g, i am trying to install apps from apple store,, installation stop in middle,and say u have to do install through itunes from your laptop. when i am trying to install it from my laptop,, its failed again n again,, help me out ,,

hii,,, i am using iphone 3g, i am trying to install apps from apple store,, installation stop in middle,and say,, u have to do install through itunes from your laptop. when i am trying to install it from my laptop,, its failed again n again,, help me out ,

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

How come file sync to CC fails again and again and ...

Again and again ... the file sync to CC fails
Again to day - I have trouble with file sync to CC is about
It is about every week since this summer that this file sync does not work.
I have tried to get an answer - but have not got any. It seems that everybody just accept that this thing does not work
Can you help med - Please !
To save time:
I have sufficient bandwidth
Every other application using network connection works (ftp, htttp etc)
It is pure plain and simple filenames (eg abc.pdf), it is simple pdf files, it is small sizes (like eg 5-6mb)
For every uploading of eg 10 files, only about 6-8 succeed. The

Hi,
I am sorry you are having issues with file sync, Could you please send me your log files.
The logs are located at
Mac:
The log file can be found here:
<Mac Hard Drive>/Users/<username>/Library/Application Support/Adobe/CloudSync/CoreSync-YYYY-MM-DD.log
(where YYYY-MM-DD indicate the date of the last log)
Note: The Users Library user folder is hidden on starting with 10.7 or later
see http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html
Windows:
The log file can be found here:
C:\Users\<username>\AppData\Roaming\CloudSync\CoreSync-YYYY-MM-DD.log
(where YYYY-MM-DD indicate the date of the last log)
Note: The AppData folder is hidden by default this doc shows how to show it if needed
http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html
Please zip them up and send them to [email protected]
Thanks
Warner

Hard drive fails again

I have had 2 new hard drives put into my MacBook Pro ( mid 2012 ) since July this year but the third one has just failed again.
I collected my MacBook on Saturday ( 7th September ) and I didn't have it 24 hours before I saw the same problem happening again.
The machine will constantly beachball on me and then freeze up completely, I end up getting the folder with a question mark in it.
I'd tried to reinstall the OS but it cannot find a disk to install it onto.
Does anyone know what's causing this constant problem?
I'm getting really annoyed at having to bring it into compub for them to say they will replace the hard drive only for the same problem to napping again when I get it back.
Could it be something else in the MacBook that's causing this problem?
My mac has been out of it's 1 year warranty since the end of july but the new hard drive has a 90 warranty and under the European law I know that the machine has a 2 year warranty on it excluding certain parts ( hard drive, charger etc. )

Since you're having so many hard drive failures, your problem may be with the SATA cable used to connect the hard drive to the logic board.
If your last repair is still under warranty, I would return the machine to the Apple Store/AASP that completed the repair and ask them to check the SATA cable. While it may be that you're simply having 'bad luck' with drives, I suspect the cable with so many drive failures.
Clinton

Logic Board Fails- again.

Hi everyone.
I have an iBook G3, purchased in Sept. of '03. The logic board crashed in Dec. of '04, and again in March of '05. Both times, I had the notebook sent in, and apple replaced the logic board free of charge, under the logic board replacement program.
Now, however, it has failed again. And, I'm getting a little fed up. I'm wondering what you think I should do- send it in for a 3rd replacement (which it's still under the 3 yr- policy until Sept), or try to fight for a replacement of the computer altogether. I'm afraid that if I get it replaced, it's just going to crash again outside of the 3 year plan, and then apple won't do anything. Should I attempt to demand a new machine now?
Times like these are soo frustrating. Mac's are great, but when they have problems, it's like the whole thing falls apart and there's never an easy tweak or fix.
Thanks for your opinions...
Melanie Patterson

I was kind of afraid of that. I'm not surprised.
When you get it back, avoid picking it up by the left front corner alone. If you're going to pick it up with one hand (as I usually do), pick it up in the center, under the trackpad.
The theory is that picking it up by the left front corner causes enough flex in the case that it puts pressure on the logic board and causes the solder on the graphics chip to let loose. So, if you can avoid doing that, it may help your iBook last longer.
Have you seen the new MacBooks (just announced yesterday)? Maybe your G3 will last you long enough to save up for one of those little sweet things. I'm looking at them longingly.

Make gcc fails (again)

after all the previous problems, make gc failed again because this comand
/cygdrive/c/crossbridge-master/sdk/usr/avm2-unknown-freebsd8/bin/ar rc ./libgcov.a libgcc/./_gcov.o libgcc/./_gcov_merg
ran for a short time and exited without producing the libgcov.a that was expected. the "ar" in question
seems to be running and accessing input file, but produces no output.

I also wanted to let you know, that I find it incredibly stupid, that cookies are hidden away in a tools menu; when most internet users would obviously prefer to be able to immediately see what cookies are being used, and could then just click and delete them immediately, without having to click 4 different buttons and then delete them. PLEASE MAKE THE COOKIES EASIER TO GET RID OF, BY SHOWING THEM IN THE BROWSER ALL THE TIME. thank you

BlackBerry 8100 - Loading Software Fail Again and Again

Hi Dear BlackBerry 8100 Users.
      My history is very sad, because some days ago I try to load the software from version 4.5 using the application loader for my specific celular service provider, but The process fail again and again and again... My BlackBerry is dead..
      Well The problem with loader after the process of "LOAD JVM and System Software" after this step the loader goes to step named "Wait for device initialization" in this process the phone lost connection with PC and gain connection many times finally the winner is lost connections with PC and ofcourse the entire process fail with the first message "USB Device Not recognized" and finally with messages "Unable to complete the load operation" and entire process of loading system software stop and nothing.
    ¿Anybody has a possible solution for this problem or advices or procedures to follow?
Note: I configure the USB hub to avoid the process of saving power
Thanks in advance

Hello and welcome to the forums!
It sounds like maybe you computer isn't able to power the device when the process is "Waiting for device initialization". Are you using a laptop computer? Here are a few articles about USB connection issues.
Troubleshooting USB connections
A 507 error message appears on the BlackBerry smartphone while upgrading BlackBerry Device Software (see number 4)
And here is a post on the forums about how to use the Web-Based software loader to load your device software - I have had some success using this when other methods fail.
hope this helps
-tg
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

With installation of 10.1 I lost finder search function. The finder window appears, but no matter what I put in the search window, nothing is found. I re-installed it with initial success, but it failed again very soon.

With installation of 10.1 I lost finder search function. The finder window appears, but no matter what I put in the search window, nothing is found. I re-installed it with initial success, but it failed again very soon.
MacBook Pro (15-inch, Mid 2010)
OS X 10.10.1

Hey Reoh,
Thank you for contributing to the Apple Support Communities.
If searching for files in Finder doesn't return any results, try using the steps in this article to reindex the Spotlight search index of your MacBook Pro hard drive:
Spotlight: How to re-index folders or volumes - Apple Support
Sincerely,
Jeremy

HDD fails again after restoring data from Time Machine?

Hello,
I will try to explain my case and end with a question that maybe someone will be able to answer (I hope..):
1. My imac started to run very slow and every 2 minutes or less appeared the coloured wheel for some secs. While the wheel was visible, the Os and all the apps running freezed.
2. Firstly I thought it was a software problem, but after some "testing" I started thinking on a hard drive failure or similar.
3. I did a disk verification whith the Disk Utility and it failed.
4. Panic!
5. I booted from the instalation DVD and tried to repair the hard drive with the Disk Utility.
6. Nothing..
7. I erased my HDD partition and created a new one.
8. I used the DVD to install again all the Os X.
9. After the installation all seemed ok. The HDD passed the verification and the spining coloured wheel appeared only when it should.
10. I restored my data, apps, etc from my Time Machine HDD using the Migration Assistent utility.
11. After the restore, the problems with the HDD reappeared.
Do you think Time Machine can store damaged files and after a restore make a healthy disk (only with the Os X installed) crash?
Has anyone experienced the same?
Thank you!

Sounds like the hard drive might be starting to fail.

Premiere Pro CS4 Installation Failed - Again!

Hi all
We are currently using an old version of Adobe Premiere which I would like to upgrade to the latest version. I want to show everyone in the company how good the latest version is and get them to pay for an upgrade/full version.
I then noticed a free trial download for Adobe Premiere Pro CS4 and thought great idea. Well done Adobe I can now show everyone how good the latest CS4 version is.
5 days later I still can not get the damn thing to install and work!! :-(
In a desperate move I even tried it on a new Windows XP Pro SP3 - 3Gb RAM - Quad Core - 1Tb HD etc.. and when I try and install the Premiere windows 1.3Gb trial installation it eventually says at the end of the installation process (which takes for ever) "Installation Failed - One or more required components of Adobe Premiere Pro CS4 failed to install correctly." and it shows the following error log:
Adobe Dynamiclink Support
Error:
Error 2.
Adobe Media Encoder CS4
Error:
Error 2.
Adobe Media Encoder CS4 Additional Exporter
Error:
Error 2.
Adobe Media Encoder CS4 Dolby
Error:
Error 2.
Adobe Premiere Pro CS4
Error:
Error 2.
Adobe Premiere Pro CS4 LangPack (en_US)
Error:
Over the last 5 days I have looked through this forum site and tried every recommendation it suggests to fix the problem including:
1) Uninstalling / Re-installing serveral times the Adobe Premiere Pro CS4 which eventually comes up with the above error.
2) Turned off all Anti-Virus applications and disabled all running windows applications.
3) I have also tried the WinCS4Cleanupscript process
4) Manually deleted and removed the premiere folders
5) I even rang up adobes technical support line and they said use the forums to solve the problem. Cushy job they have...
None of the above fix the problem...
So here I am. Has anyone got any ideas how to make it run up in trial mode ?
Your help and advice would be greatly appreciated as I suspect im not the only one having this problem.

Day 8 - OK I have finally fixed the problem. I got fed up and purchased the full Adobe Premiere Pro CS4 product and it installed and worked 1st time!!!
I must admit im very annoyed that the Trial version failed but the full product works. The 2 x Premiere Pro CS4 installation CDs went through the installation process without a hitch and I did not get any installation error messages at all.
So my no 1 question is why does the online Adobe Premiere CS4 Trial version fail to install but the full product can ?
For what its worth, here are my final observations from this whole saga:
1) The first thing I noticed on the Full Product CD Installation is it defaulted to and installed the "en_International" version and not the "en_US" language version. For some reason the online trial version defaulted to "en_US" language and I used this option during the trial installations. Maybe this language option upsets the installation process on my UK PC.
Now I have it working im not going to risk re-installing it all again. But if your a UK user and you encounter problems during the trial installation process then try selecting the "en_International" language option. You never know.
2) Another obvious observation is the trial version has numerous features removed and hacked out of it So did the Adobe engineer get carried away with the hacking process and also remove some important installation code and procedures.
After several days of trying to get the trial version to work there is obviously a problem with the trial installation process and it needs looking at. I must of installed and reinstalled it 15+ times and during this time it upset my Dreamweaver CS4 app so forcing me to re-install this application as well.
Please Adobe just give the online users the option of 2 x CD ISO Images to download and burn onto a CD as this could save other users the same frustrating time I have had and maybe give you more revenue.

ZCM 11.2.4 to 11.3 fails again

This topic has ben on this forum before but I have yet to see an answer. I have an SR on the go but nothing new has been suggested other than restore from back-up and try again. Based on previous posts, it appears that most have installed no problem but a few struggle and the issues seem to be permissions or missing files.
Environment - ZCM 11.2.4 on SLES 11 SP3 - trying to install ZCM 11.3. Audit DB has been created ahead of time I have been given credentials but I don't have direct access to MSSQL server.
Is it possible there is something basic in the install process?
1. Does DB address need to be in either IP address or DNS format?
2. Does install package need to be on a physical DVD or can it be in a folder on the server? Any particular folder?
snippet from verifyDB after failed install (couldn't find /jodbc folder anywhere):
./zdc_verifyDB
ls: cannot access /opt/novell/zenworks/java/lib/jodbc-*.jar: No such file or directory
|__ / _ \ / ___| Novell ZENworks(R)
/ /| | | | |
/ /_| |_| | |___ v 0.9 (11.3)
/____|____/ \____|
+ Starting ZENworks Diagnostic Center.
+ ----------------------------------
System Information:
+ ----------------------------------
OS: SUSE Linux Enterprise Server 11 64 bit
Database: Microsoft SQL Server
ZCM Version: 11.2.4
+ Loading configuration.
+ Initializing native libraries.
+ Attempting to connect to database.
+ Connected to the database.
+ Verifying System State.
+ ----------------------------------
Running 'Database Verifier'.
+ ----------------------------------
+ Verifying ZCM Database metadata.
[!] 1 error(s) found while verifying Indexes of Table LC_EntitlementToPPMap
[!] 1 error(s) found while verifying Constraints of Table LC_EntitlementToPPMap
[!] 1 error(s) found while verifying Constraints of Table LC_LicenseToPPMap
[!] 1 error(s) found while verifying Triggers of Table LC_TallyProduct
... and many more ...
snippet from top of SystemStatus - this identical line was posted earlier with no update:
com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: org.hibernate.exception.SQLGrammarException: could not load an entity: [com.novell.zenworks.datamodel.objects.folders.Fold er#4fd37ae44f381007d0d4dbe4833b58cb]
Thanks,
Neil

Originally Posted by wcdsbdavid
This topic has ben on this forum before but I have yet to see an answer. I have an SR on the go but nothing new has been suggested other than restore from back-up and try again. Based on previous posts, it appears that most have installed no problem but a few struggle and the issues seem to be permissions or missing files.
Environment - ZCM 11.2.4 on SLES 11 SP3 - trying to install ZCM 11.3. Audit DB has been created ahead of time I have been given credentials but I don't have direct access to MSSQL server.
Is it possible there is something basic in the install process?
1. Does DB address need to be in either IP address or DNS format?
2. Does install package need to be on a physical DVD or can it be in a folder on the server? Any particular folder?
snippet from verifyDB after failed install (couldn't find /jodbc folder anywhere):
./zdc_verifyDB
ls: cannot access /opt/novell/zenworks/java/lib/jodbc-*.jar: No such file or directory
|__ / _ \ / ___| Novell ZENworks(R)
/ /| | | | |
/ /_| |_| | |___ v 0.9 (11.3)
/____|____/ \____|
+ Starting ZENworks Diagnostic Center.
+ ----------------------------------
System Information:
+ ----------------------------------
OS: SUSE Linux Enterprise Server 11 64 bit
Database: Microsoft SQL Server
ZCM Version: 11.2.4
+ Loading configuration.
+ Initializing native libraries.
+ Attempting to connect to database.
+ Connected to the database.
+ Verifying System State.
+ ----------------------------------
Running 'Database Verifier'.
+ ----------------------------------
+ Verifying ZCM Database metadata.
[!] 1 error(s) found while verifying Indexes of Table LC_EntitlementToPPMap
[!] 1 error(s) found while verifying Constraints of Table LC_EntitlementToPPMap
[!] 1 error(s) found while verifying Constraints of Table LC_LicenseToPPMap
[!] 1 error(s) found while verifying Triggers of Table LC_TallyProduct
... and many more ...
snippet from top of SystemStatus - this identical line was posted earlier with no update:
com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: org.hibernate.exception.SQLGrammarException: could not load an entity: [com.novell.zenworks.datamodel.objects.folders.Fold er#4fd37ae44f381007d0d4dbe4833b58cb]
Thanks,
Neil
Looks like you are running 11.3 ZDC against 11.2.4. Here is the 11.2.4 one: http://download.novell.com/Download?...d=5PUuVzlO8Fk~
Simply mount the ISO. I use /mnt the docs have another path, should also work: https://www.novell.com/documentation...a/brn2dm5.html
Thomas
Thomas

G570 failed again

Similar Messages

Maybe you are looking for