[G575] CD/DVD drive disappeared - no longer recognized in Windows

I have a Lenovo G575 that I have had for a couple of years now. Within the past week the CD/DVD drive has disappeared. If I go to device manager it is not listed. I went through the regedit and tried to delete all the upper/lower filters in the registry and no change. I can insert a disc and it will spin and I can here it running but it won't recognize that there is a disc in the drive. Is there any way I can just reload the driver? And if so where can I find just a driver? I have gone to a couple of sites but haven't been able to just find a CD/DVD driver.
Any and all help is greatly appreciated.
Moderator comment: Subject edited for clarity.

Hi Kechrmi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the CD/DVD driver is not detected in the device manager in your G575 Laptop, I suggest you to check of the CD/DVD is detected in BIOS. To access the BIOS menu press F2 when the Lenovo logo appears on the screen while the computer is starting up.
And to conform the issue, please perform OKR (One Key Recovery) using the OKR button located beside the power button.
NOTE: Please backup the data in the computer before performing OKR, as the data will be completely erased.
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

My DVD drive is no longer recognized.

For the past few months my dvd drive would not open when I used the eject disk function. A few times I went into the startup menu and ejected the disk manually. Now the dvd drive is not even recognized by the computer. This dvd drive is the original and my G5 is at least 5-6 years old. Should I replace the dvd drive or is this a software issue?

Hi birdman1999, and a warm welcome to the forums!
It is very likely it is gone, I've not had an Optical in the last 8 years that lasted that long myself.
Does it not show up even in Disk Utility or System Profiler?
Does it boot off the Install Disc if inserted and holding the c key at bootup?
Here's some options for replacement...
http://eshop.macsales.com/staticpages/Framework.cfm?page=superdrive/sdl_powermacg5.html

My CD/DVD drive is no longer recognized by my computer

Anyone that help me get my computer to reconnect with my DVD drive, I would be greatly indebted to. It just started this yesterday. I put in a DVD and go to my computer and it's like there is nothing there as far as a D drive. Please help.....

see if this helps support.microsoft.com/kb/982116
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Dvd drive disappears

I don't know why, but my DVD drive is there when I start the computer
but if I use Paralells and then quit my dvd drive is no longer recognized by
my computer. NOW It is disappearing after sleeping overnight !!!
Everytime I want to use a CD or DVD I have to restart. Is there another way
to make the computer recognize it>?
I am speaking on the internal one.
thanks.
mac pro 4,1
OS 10.9

You are correct.. I can assume it will be gone after using Paralells, BUT, it also happens sometimes when I have not booted paralells. That's where it is strange.
I will send this question off to parallels as well to see if they know anything (probaby not)
If you know anyother members that might shed some wisdom, please invite them to this discussion.
Thanks Ratvega.
(Vega is my Dog's name.. She is awesome)

SATA DVD Drive disappeared after Install HELP!

I installed Snow Leopard using my second DVD drive in my Mac Pro. After install I tried ejecting the install DVD and it dissapeared but didn't eject the disk... that DVD drive is no longer recognized — I can't option+eject to get it to eject, when I do this it comes up with the Shutdown computer dialogue. "About this Mac" lists the drive as present under the Serial-ATA list, Toast doesn't recognize the disk. Any suggestions apart from paperclip?
Thanks,
John

Reboot and hold "option." In the boot menu, do you see the DVD? If so, try to eject it with the eject key.
If not, it sounds like something is wrong with the drive. The next thing would be to use the paperclip to get the disc out, and then troubleshoot the drive.

Receive message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)... "Error occurred while converting the file 'songname'. The required folder cannot be found." CD/DVD ROM is no longer recognized until restart.

Consistently receive the following message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)...
"Error occurred while converting the file 'songname'. The required folder cannot be found."
CD/DVD ROM is no longer recognized until computer is restarted.

I have the same problem. I recently moved my music from a Vista PC to a new Laptop with an external CD drive. It will copy one song from the CD and it will show in the Music file and then I get the message ' Error importing a CD - Folder not found'. I must unplug the CD drive and plug it back in. I have seen no fix for this problem.

Satellite M505-S4940 DVD Drive Disappear

I have sent my lop top back to Toshiba 2 times because the DVD drive disappear, I insert a Cd or DVD and nothing happens, and try to go to my computer and is not there, any body had the same issue? And how can I solve the problem?
Do I need to sent the computer to Toshiba again?
Help Please!!!!

Satellite M505-S4940
Maybe this helps.
Your CD drive or DVD drive is missing or is not recognized by Windows or other programs
-Jerry

Firewire external mobil disk hard drive is no longer recognized

After last system update, my firewire external mobil disk hard drive is no longer recognized. Any solutions?
Why does MacOS go backwards... gets worse over time?

Thought you could use this info about getting FireWire to work! I have had no trouble with any update Apple puts out (the Combo update is what I normally choose). Are you running 9.2 like your specs. say? You are in the Tiger forum, so I'll assume you haven't updated your Macs specs.
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours may be the 10.4.5 Combo update. Others reading, download the Combo that applies to your system.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good!
Good Luck!
Cheers!
DALE

TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

Here's what I get:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:24:7d:e7:1e
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:11:24:28:2e:71
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:11:24:ff:fe:7d:e7:1e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>

CD/DVD drive is no longer working on my HP Pavilion Slimline s3720y desktop

Hi! I am having problems with my HP desktop computer and wonder if someone can help me solve this issue.
My CD/DVD drive is no longer working on my HP Pavilion Slimline s3720y desktop. When I tried to test my CD/DVD drive to ensure it it was working properly , When I clicked to open Hardware Diagnostic Tools and it said "The software program is not found". The CD/DVD drive was working but will not respond or recognize that a disk is in the drive. It states insert disk in drive. Where are my diagnostic tools that are missing?

Hi,
Your Seagate update CD is to update the firmware for Seagate hard drives.
Did you try the tips in the post that I referenced above?
Error 31 indicates that the driver is not installing correctly.
Go to Device Manager, locate the CD/DVD drive, open up the CD/DVD drive, double click, click on the Driver tab, then uninstall the driver. Now reboot your PC and Windows will re-install the driver.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

I'm trying to burn my audiobooks on CDs. Got through three books just fine, then my CD/DVD drive "disappeared." I rebooted and got it back, but iTunes says, even after I un- and re-installed it, that it doesn't have the registries to burn CDs.

I'm trying to burn my audiobooks on CDs. Got through three books just fine, then my CD/DVD drive "disappeared." I rebooted and got it back, but iTunes says, even after I un- and re-installed it, that it doesn't have the registries to burn CDs. How can I retrieve this capability? My audiobooks are from Audible.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Help! iTunes makes my DVD drive disappear

I installed iTunes version 7.6 and my DVD drive disappeared when I re-
booted my pc. At first I was able to restore to an earlier point and
my DVD drive re-appeared. When I tried to re-install iTunes, again the
DVD drive disappeared and I was unable to restore at all. The only way
I was able to restore my DVD drive was to restore my pc back to
factory settings. I have since tried an earlier version of iTunes (Version 7) with
exactly the same results as version 7.6. I have a 80GB iPod classic and I'm using XP. Can anyone help me install iTunes without losing hardware?

I have exactly the same problem. there are loads of others the same and some have advised to get a really old version of itunes and others have had to down load new drivers. I as of yet have been unable to resolve the issue yet I know others with Vista who can run new itunes with no problems. How frustrating!!! try looking through the archives on this support page for plenty of ideas on how to resolve it.

Installed iTunes 7.6 and my CD/DVD Drive disappears

I noticed that since I installed the newest version of iTunes on windows vista my DVD player is no longer present. I realized this through a series of trial and error. Originally I noticed my DVD drive was not responding and could not figure out why. Had HP tech support fix the problem by removing a damaged registry key. But later when I went to iTunes it caused an error in iTunes. When I reinstalled iTunes the DVD drive went missing again. Microsoft Windows SP 1 hasnt fixed this and HP has not fixed this has Apple or anyone fixed this issue yet?

Had the same problem but I've fixed it:
Go to Run. Type in "regedit" and click OK. Now follow this procedure:
Computer>HKEYLOCALMACHINE>SYSTEM>CurrentControlSet>Control>Class>{4D36E965-E325-11CE-BFC1-08002BE1 0318.
In this folder, you should see a file called UpperFilters. Delete this! Your CD/DVD Drive should show up again! iTunes should continue to work but I've noticed that it doesn't allow me to burn CDs anymore :S

What can I do if my CD or DVD drive doesn't work properly in Windows 8?

QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
AnswerNote: For help with this issue in Windows 7, please see this article.
To get your CD or DVD drive working correctly, try these suggestions in the order listed.
Reinstall the Driver
Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
Power Cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
Hold down the power button for thirty seconds.
Reattach the battery if removed.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Start the computer and test the drive
Microsoft Fix-it
Your computer may exhibit one or more of the following symptoms:
Your CD or DVD drive no longer appears in Windows
Your CD or DVD drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to a CD or DVD inserted into the drive
You receive an error message about your CD or DVD drive
If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
System Restore
Try using System Restore to restore to the most restore point from before the problem arose.
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
System Recovery
If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
For more information on performing a recovery, see the following article:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
Contact Customer Support
If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

HT2953 I have an hp dvd ram gh60L DVD Drive. It shows up in Windows Explorer (Windows 7), but doesn't show up in itunes. Can someone suggest a fix, please?

I have an hp dvd ram gh60L DVD Drive. It shows up in Windows Explorer (Windows 7), but doesn't show up in itunes. Can someone suggest a fix, please?

Hello b0nvivant,
Thank you for providing so much information about the iPod issue you are experiencing. I found an article with steps to take when your iPod is recognized in Windows Explorer but not in iTunes:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Thank you for using Apple Support Communities.
Best,
Sheila M.

[G575] CD/DVD drive disappeared - no longer recognized in Windows

Similar Messages

Maybe you are looking for