G575 Screen/boo​ting problem - black screen on monitor until windows is fully loaded

Hi
I have searched online but can't find a similar thread. My laptop went blue the other day (as all pcs/laptops seem to do eventually) and I unplugged the power and rebooted.
The problem I have had since is that on my laptop, it's just a black screen (no windows logo or anything, or boot screen) until windows loads fully. So my laptop is working - it's just that there's no display until it's loaded.
I have my laptop connected to a tv also, as a secondary monitor. On there, the windows logo appears, everything works fine. I can see the boot screen and the windows is loading display. But not on my laptop - just black until windows has loaded. I have windows 7.
I restored my system to it's intial state using one key recovery but it has not solved the problem. It is worrying because I'm scared that soon my monitor will not even display anything even when windows has loaded.
Any ideas/advice?

Hi,
Welcome to Lenovo Community!
I’m sorry to hear about your situation and the issue persists even after performing OSRI (Operating System Re-Install) using OKR (OneKey Recovery). Please check if the issue persists after re-installing the Display & Chipset Driver for the computer.
If the issue persists, I would strongly suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Satellite Pro M40: screen stays dark untill Windows has fully loaded

    Hello to all on here.
    I have a problem with my laptop. My laptop is a Satellite Pro M40.
    When I turn on my laptop I have found the back light will not come on... the screen will stay dark untill it has fully loaded into Windows. I have checked all of my power options and there all fine. Even if I can get to the Bios screen its impossible to read the txt due to no backlight. I have tried holding the Fn & F7.. noy joy.
    Does anyone have any ideas?
    Richard

    Hello Richard
    I didnt see something like that before and I am little bit confused why you can not see BIOS settings but running OS. Usage of FN+F7 key combination will not help because this option works just under Windows and not under DOS level.
    If possible try to connect external monitor and test it again. Anyway I dont believe that you can fix it on your own. Try please to contact Toshiba authorized service partner in your country. Explain the situation and you will see what they will say.
    If you find out something please let us know. It will be really interesting to know why this happen.

  • I am running Mavericks on my MacAir. I developed a powerpoint presentation on my PC and tried to run it on my MacAir. When I go to full screen I get a black screen and Powerpoint crashes. Any ideas?

    I am running Mavericks on my MacAir. I developed a powerpoint presentaiton on my PC and transferred it to my Mac. In powerpoint on my MacAir, when I go to full screen, I get a black screen and then power point crashes. I am running the latest version of powerpoint 14.0. Can you help?

    Did you look at this https://discussions.apple.com/message/23589702#23589702
    Phil

  • Just tried setting up bootcamp on MacPro. Computer now boots to white screen before going to black screen with curser in upper left corner. Can anyone get me back to Mac operating system so I can start over again?

    Just tried setting up bootcamp on 2014 MacPro 13" laptop. Computer now boots to white screen before going to black screen with curser in upper left corner. Can anyone get me back to Mac operating system so I can start over again?

    Hi there rjr25350,
    You may find the information in the article below helpful.
    Boot Camp: Windows installation boots to black screen with blinking cursor
    http://support.apple.com/kb/TS4536
    -Griff W. 

  • HT1212 My iPhones screen is broken(a black screen and the touch function does not work). I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

    My iPhones screen is broken(a black screen and the touch function does not work).I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

    i don't see a way for you to back up your phone, because it will require you to unlock the phone. 

  • Screen problems - black screen and lock-up (plus HDMI issues)

    Hi, I'm not sure if these are related to the same fundamental issue, but they are both serious problems that need resolution.
    I have a new mid-2012 MBPretina.  I am on all the latest updates (10.8.2).
    The first problem is the most recent, and the most serious problem.  Since I updated the Java a couple of days ago I've been experiencing random black screens and lock-ups.  Essentially, what happens is that sometimes when I perform an action (opening an app, clicking a link on a webpage, performing other kinds of in-app actions, etc.) the computer screen will go black.  About half the time I can, through my own memory, try keyboard combinations to quit or force quit the most recently used app (the one where the action was just performed), and I will get some glimpse of the underlying apps, while the menubar and other areas will remain black until I move a window on top of the black space.  Sometimes no key combinations work and I am forced to perform a hard restart with the power button.  This is a serious issue, obviously, since I will lose current work/progress in my apps.  I'm not sure if this is because of the new Java update, or has to do with something else, but it started happening shortly thereafter, over the last 2 days.  I work most of my waking day on my laptop, and this "black screen of death" has happened about 5 or 6 times a day.
    The second problem I have been experiencing since I starting using my MBPr with external HDMI displays in August/September.  The problem is that I will plug the MBPr into an HDMI display, the screen will temporaliy go black, and then bring me to the login screen (as if it's crashing, albeit softly).  This happens about 1 out of 4 times nowadays.
    How can I fix these problems, especially the first?

    UPDATE:
    Clearly there's a problem because a third of the way through a clean reinstallation from scratch it black screened again. Hmmmm.
    Now this is not good. Problem is I can't rule out potential updates from Apple that might have caused this either.
    The search for solutions continues.

  • W510 Gaming Problem - Black screen

    First, I did some search before I post, and I found someone had a similar problem, but did not found any solution for it.
    I have the  similar problem as mentioned on:http://forum.lenovo.com/t5/W-Series-ThinkPad-Laptops/W510-crashes-during-heavy-CPU-GPU-usage-possibl.... Black screen, keyboard no longer function, and I can hear the cooling fans slowing down, HARD DRIVE STILL FUNCTIONING, as I can see the HDD light is flashing.
    Only thing I can approve is that this problem is not caused by heavy CPU or GPU use or overheat, because my computer behaves different on different games.
    Here are some games that will cause this problem. All my games are licensed.
    Plant VS. Zombie:
    -Problem occurs while launching the game on FULL SCREEN mode.
    -After edit registry to WINDOWED mode, the game works well.
    Left 4 Dead 2:
    -Problem occurs while launching the game first time.
    StarCraft 2:
    -Game successfully launch on both FULL SCREEN and WINDOWED screen.
    -I have been play SC2 for a lot of times, for different time period amunt of time and this problem only occurred for once when I was in the middle of a battle.
    GTA 4:
    -Problem occurs when I play this game for 2-4 hrs.
    This problem NEVER OCCURRED on: CS1.6, Red Alert 3, COD4 & 6, Metro 2033
    Also my computer passes all the test mentioned on the other post.
    HERE is my comp hardare info:
    OS: Windows 7 Ult 64-bit (6.1 Build 7601) [SP1], I have same problems also before SP1.
    Sys Model: 4318CTO
    BIOS Ver: 1.00PARTTBLX (System BIOS Version: 6NET74WW)
    Processor: Intel(R) Core(TM) i7 CPU Q820 @1.73Ghz
    Memory: 8192MB
    DX verison: 11
    Graphic: NVIDIA Quadro FX 880M (1600x1900)
    All my driver have been updated to the lastest stable release version.
    Anyone have any suggestion for this weird problem???
    Solved!
    Go to Solution.

    Never mind, thx for ppl who read this post.
    The problem solved.
    My vid driver was outdated, i thought it was the lastest version because "Automatically find drivers for my NVIDIA products" on nVidia website never notify me for update.

  • HP Pavilion DV3 41700-EE Problem-Black Screen after installing graphic card driver

    Hi,
    Laptop Model : HP Pavilion DV3 41700-EE Entertainment series.
    I download the latest official driver for my lap top from this link : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93326-1&cc=us&dlc=en&lc=en&...
    After the installation i rebooted my device and after the windows loading i got a black screen ! i went to safe mode and unistall the video card and also it's driver from device manager and when i came back the black screen was gone but i have only my onboard Integ graphic which is very slow.
    also i went to AMD web site and get AMD Catalyst from their web site but nothing happened after the installation and i think they don't provide an appropriate driver for my lap top.
    i also tries to go to device manager and with right click on my display adapter and update driver point to the display driver location on my syste but this time it does not take time the black screen after restart, and in the middle of installation i got a black screen.
    Also i upgraded my BIOS Firmware from 16 to 24, but nothing changed.
    i just wanna know is it a software problem or hardware problem ? how can i find out that ?
    also i don't want this switchy manner and i don't care about the power efficency. i just want to my device work on maximum performance.
    What you suggest i do ?

    Use the recovery manager to reinstall the original AMD graphics driver and Catalyst Control center.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Replacement LCD install problems, black screen after boot.

    Hello,
    Just replaced my broken LCD screen (model LTN170CT10) about a third of the screen was just vertical white lines and you could see a dark patch where the LCD was broken.. After quite a lot of searching I found a suitable replacement the same as listed on this link - http://www.powerbookmedic.com/17-Inch-MacBook-Unibody-Display-LCD-Screen-NEW-p-1 7383.html
    My original screen was the matte anti glare so I decided to change to glossy as trying to find the aluminium bezel was proving impossible, anyway I followed the guide off this website and proceeded to replace the LCD, now after I boot all I get is a black screen, can't see any image at all, totally black. I opened the mac back up and checked all the cables and everything seems to be connected right but I still get the black screen. I thought I must have bought a DOA but I've tried the original LCD and that is just black as well.
    Connected and external monitor and the mac is booted no problems, checked everything else worked, bluetooth, isight , airport etc, everything works fine apart from the display.
    Systems profiler shows this -
    http://i114.photobucket.com/albums/n265/remrok/Screenshot2011-02-24at003756.png
    I've zapped PRAM and reset the PMU and still nothing
    Any ideas of what to check next or any other info would be greatly appreciated.
    Thanks,
    Liam.
    Update -
    After screen sharing the Macbook Pro on my G5 I tested the brightness buttons on the the Macbook's keyboard and sure enough I can see the settings go up and down. The contrast buttons don't do anything though the icon comes up on the screen and looks as if the contrast is turned all the way down and there is also a circle with a line through it, pic here - http://i114.photobucket.com/albums/n265/remrok/Picture1-4.png,

    repost in the Boot Camp forum: https://discussions.apple.com/community/windows_software/boot_camp

  • Hard Problem ( Black Screen )

    hey guyz today i have a very hard problem ... i have a verizon IPhone 4 and it's in a black Screen doesn't do anything .. and doesn't want to pulg
    to the PC ... I tried .. everything .. DFU mode ... recovery mode .. nth ...

    thanks I tried this but no help. Went to the genius desk today and they checked the screen connection inside. This fixed it so happy. Seems it works loose and can become unreliable. Cheers

  • NVIDIA problem - black screen

    Hi,
    I've got a MacBook Pro 17inch, early 2009 - and since I've installed the latest Lion Updates my Mac has got strange problems with the graphic card(s).
    The first time the screen kept black after I wanted to wake it after sleep mode. Restarting several times could not solve the issue. So I waited half an hour, tried starting it again and it was all fine - like nothing ever happened.
    After a few days the black screen issue came up again - and I couldn't figure out, how to solve this (other than restarting and restarting and restarting ...). You can hear the typical Mac startsound, but then nothing happens.
    I'm not able to see a pattern here, because sometimes my mac boots completely fine but randomly refuses to work at all.
    Since today I can't activate the bigger NVIDIA-card in Lion - it's not even mentioned in the system informations (there is only the GeForce 9400M and no other card).
    I would reinstall Lion, but I'm not sure, if this could crash the whole machine. Because, if this is a hardware defect, I'm afraid the Lion installation can't switch between both cards if necessary.
    I searched on Google and there were several articles about a similar issue (with a black screen and no chance to get it work again) and some guys wrote, there was an issue with NIVIDIA cards from that time and that Apple extended the warranty up to three years for Macs with that problem.
    My questions:
    What can I do now?
    Is there a chance of getting this problem fixed without paying 800 € for repair?
    Would you think it's a hardware problem, or is it because of the latest update?
    Thank you for your answers!

    fublador wrote:
    My questions:
    What can I do now?
    Is there a chance of getting this problem fixed without paying 800 € for repair?
    Would you think it's a hardware problem, or is it because of the latest update?
    Thank you for your answers!
    1 - Take the computer to an Apple store or an AASP.  Whichever is more convenient for you.  Let the staff properly diagnose your issue.
    2 - If you want to DIY - Do-It-Yourself Laptop Repair
    Research YouTube's 'How To' video tutorials
    FixYa
    3 - To check for hardware issues, boot up from your system disc that came with your computer and run the Hardware Test - Intel-based Macs: Using Apple Hardware Test

  • Start-up problems, black screen or open firmware

    My iBook G4 1.33GHz Dual USB, with 1 gb RAM memory has been troublesome lately. It's installed with the latest version of OS 10.4.9
    When starting up the ibook, it will sometimes only show a black screen after the boot chime. Repeated force restart sometimes makes it boot up the open firmware (white screen).
    Then I see the error message:
    "Illegal instructions at: %SRR0:ff85e778 %SRR1:00081000"
    When I continue on with "mac-boot", I get the blue screen with a question marked box. So it can't find the startup disk.
    This usually only happens when I'm done working for the day and close the lid on my ibook without manually clicking on the sleep mode when I put in in my drawer,. I've seen several times that the screen is still on when I close the lid, so it will continue to burn battery time.
    I've managed to get the ibook to boot properly after removing the battery and letting it "cool-down" for 15-20 min. Also, zapping pram, vram sometimes works, but I don't know how much that actually helped. It worked once when I typed in the reset-nvram in the open firmware screen too.
    I'd rather not have this happen at all! Any suggestions? Is this the much-talked about RAM memory failure?
    Any suggestions would be very appreciated.
    Message was edited by: antony chen

    HI,
    *"I get the blue screen with a question marked box."*
    That can mean several things. One, the drive is failing. Two, your iBook can't find a System Folder to boot from. Try booting while holding down the Option key which will prompt the Startup Manager window.
    MemTest
    Boot from your install disk and check the hard disk for errors.
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 15% free disk space. Not enough disk space can cause directory corruption.
    If you cannot boot from your install disk, try booting in Safe Mode
    A flashing question mark appears when you start your Mac
    Carolyn

  • Why is my ipod 4th generation have an all white screen or an all black screen?

    my ipod is on but it only has an all white screen or black screen. I'm crying over it becuase i have everything on my ipod.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Screen Sharing not working - Black Screen

    Hi
    I run a Mac Mini (2010) with Snow Leopard as a media server.  The MM is headless so I rely on screen sharing to control it.  I connect to it using Screen Sharing on my MacBookPro (also Snow Leopard) as well as LogMeIn when at work.
    I have the MM scheduled to shutdown at night and come back on in the morning.  Recently after starting up I get a black screen on Screen Sharing.  I've tried a lot of the tips given and none have worked.  Bizarrely the screen is black on LogMeIn as well so I don't believe it's a Screen Sharing issue.
    If I force a shutdown (pressing power button) then restart, Screen Sharing works fine.
    Any suggestions would be appreciated.
    Regards
    Aidan Cooper

    Hi Guys,
    Thanks for getting back to me.
    Hironmay
    I noticed the problem once I updated to Adobe Flash Player version 10.1.102.64 Universal Binary for Macs | 7.60 
    I am not sure what my development team in India has done and if they upgraded to the 1.3 SDK. I will check with them, and make sure that they do and see if that fixes the problem
    I am not sure if I am getting a RTE, no messages or errors are popping up it is just staying a black screen.
    I will pass along the suggestions you made to my development team in India, and hopefully it helps.
    I will keep you updated.
    Quick question, I was looking for the notification of the latest update on the collabritive methods blog and I did not see anything there.. is there another place I should be looking for the latest news about LCCS ?
    As always thanks for the help.
    Best,
    Dan

  • TS3230 I did an update on computer 10.6.8 today and now I have spent hours trying to figure out why You Tube screens are just a black screen with no play options etc

    Im not the most Computer tech savvy fella, stopped doing updates along time ago as I always have issues after updates. Thought I'd do one and sure enough here I am with issues. At First there was aplug in error > I uninstalled and re-installed and that has now gone buy all i get now is a black screen on You Tube that should have options to play but these options are not there. Any help greatly appreciated

    Flash Player update?  Plug-in failure?
    Wait until Adobe fixes the issue.
    If not, try this.
    Adobe Flash Player 13.0.0.0182 Pro  Plug-in failure workaround
    http://forums.adobe.com/message/6288150

Maybe you are looking for

  • ITunes Error Message Won't Let Me Finish Syncing...

    When I sync my iPod it comes up with and error message that says "Error occured reading iPod, the disk could not be read from or written to." I was wondering if anyone else has had this problem, and if they may have found a solution that they would b

  • HT3529 text messages appear as numbers not names

    I have At&T, after upgrade all most of text appear as numbers not names

  • Cannot view image info in iPhoto '11

    Pressing the info button once highligts it, and pressing it twice opens the panel with linen background but it's empty. iPhoto also slows down or seems to hang after doing this. Otherwise, iPhoto seems to work properly. Repairing iPhoto permissions a

  • Best pattern to use for multithread in vi ?

    Hi, I need to create an app, which will communicate to 5x usb to serial converters at the same time. App needs to detect individually when the USB device is connected, upon connection, send it a few commands, and wait for removal. This repeats when t

  • Want to create custom BOR object

    I want to create a  custom BOR object ZMSN in SWO1 so what value should I put in for these filed 1: super type 2:object name 3:name 4:program 5: application