G575 Windows 7 Home Premium activation problem and easy camera wont work

I have bought the G575 a month ago for my parents and everything was fine but yesterday i looked at the laptop and the camera was not working and the windows was not activated. I tried to activate it online by providing the windows key at the bottom of the laptop but it didn't work. Later i saw that the camera was not working and i tried to install the driver for it from the lenovo website and the installation failed saying that the device can't be discovered. I opened the device manager and tried to install the drivers trough the windows update and it failed saying that the drivers are found but the file is not found for the usb composite device. Any suggestions how the problems can be resolved?

Hello saso and welcome to community,
You need to enable the camera by Fn+Esc key and then install the camera driver.
If you have received the pre-loaded Windows 7 with the laptop it comes as activated. If there is issue with pre-installed Windows 7 then you need to reinstall the Windows with OneKey Recovery
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Updated iphone to iso6 and now camera wont work, any suggestions

updated iphone to the new software, and now my camera wont work. When you click on it it stays blank.

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Windows 7 Home Premium Activation Problem

Dear Forum Admin,
Cannot activate my new copy of OEM Windows 7 home premium.
Kindly resolve this issue before this becomes a legal issue.
Thank you.

Dear Forum Admin,
Cannot activate my new copy of OEM Windows 7 home premium.
Kindly resolve this issue before this becomes a legal issue.
Thank you.
Post your issue to the Windows
7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words, don't post
your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
Please do not read this sentence. Please ignore the previous sentence.

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 cont...

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 ULTIMATE then after the exctraction of files and everything the windows setup came and my mouse and keyboard stopped working and i dont know how to open mac os x there is no option anywhere?? what shall i do pls help!!!!if there are any keyboard shortcut key to open mac os x or boot camp pls mention.

For Boot Camp issues please repost in the Boot Camp forum located by clicking Boot Camp

Can I change the OS of Touchsmart 610 from Windows Home Premium to Windows 7 Pro?

I have 610 1100me system loaded with Windows Home Premium 64 bit. We bought it from Dubai and is in use in Pakistan. It started giving problems after few weeks of use. Its' hard disk makes noise and sometimes, system could not find boot disk. Most of the times blue screen of death and hanging issues. Any idea about this issue and how to fix it? My observation is that the culprit is hard disk!
Also, can I change its OS to Windows 7 Pro or ultimate (32 or 64 bit)? Where can I find all drivers for Pro or Ultimate?
Many thanks for your valueable advice.
Regards,
KK
This question was solved.
View Solution.

Hi,
Nearly nothing change interms of drivers required for Windows 7 (HP, Pro, Ultimate) unless you switch from 64 to 32 bit. You can reuse your current HP 64 bit drivers for 64 bit W7 Pro or Ultimate.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I re install windows home premium OA?

I had windows home premium OA on my computer , but I believe it was accidentally uninstalled from my hard drive. I have the product key that is on my computer. I was having trouble finding the correct link to reinstall it on my lap top.
When I went to the microsoft Website all I found was support for windows 8 . Can you give help me with the proper link? thank you

Please provide the manufacturer and model of your pc.
It is possible you have a hidden recovery partition on your hard drive which may be used instead of a recovery disk to restore your system (and Windows) to factory defaults.
Recovery procedures vary from manufacturer to manufacturer.
You should also search for any recovery disk/s that were supplied with your pc. Manufacturers invariably charge a significant fee to supply replacements.
If you decide to use borrowed/downloaded media to reinstall Windows on an OEM pc, the process may not be straightforward. Without some experience and patience you may end up with no other option than to pay a professional to finish the job.
Microsoft does not publicly provide download links for Windows. While you may stumble upon an official download source, beware that many unofficial sources will come pre-loaded with viruses, trojans etc.

Just purchased and installed photoshop and everytime i try to open it it says "windows has encountered a problem and must close the program" anyone else have this problem?

I have just purchased the photography package on my windows 8 computer and everytime I open photoshop an error message pops up saying that windows has encountered a problem and needs to close the program. I am really frustrated that this is happening after I purchased this plan and would like to be able to use the product I have purchased

+1 to Chris' assessment.
Keep in mind that it's your responsibility to provide a problem-free working environment on your computer for Photoshop, and system software (such as display drivers) can have problems.
Look in your Windows Event Logs (specifically, your Application Log) for the info requested above on the specific crashes.
-Noel

My itunes keeps crashing every time i open it with my windows 7. im active military and dont have time to be messing with this. please help

my itunes keeps crashing every time i open it with my windows 7. im active military and dont have time to be messing with this. please help

Hello there, Staver13.
The following Knowledge Base article provides some assistance in troubleshooting your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Particularly:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

When using FF 5.0, rollover type ads on Facebook game Lexulous pages are 'enlarged' and block 1/3 of the game board. Using up to date versions of Win 7 Home Premium, Adobe Flash and ActiveX

When using FF 5.0, rollover type ads (i.e. ads for XBOX) on Facebook game Lexulous pages are 'enlarged' and block 1/3 of the game board. Using up to date versions of Win 7 Home Premium, Adobe Flash and ActiveX on an HP Pavillion dv7 laptop. Does NOT happen at all in MS IE 8, but occurs every time in FF 5.0.
Also, Google 'translate this page' links do not work in FF 5.0, but works in MS IE 8. All I get in FF is a blank page, time after time.

Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above.

MacBook pro when windows 7 has startup problem and Mac os doesn't work

I installed windows 7 on my MacBook pro and it did work well. But now windows has a startup problem and "startup repair" couldn't solve it, so I can't use both Mac os and windows and my laptop has become completely useless. Any suggestion?

Reboot and hold down command-R at the sound of the chime, that should take you to the Lion recovery partition, if it does go to disk utility and see if you have an OSX partition at all.

Microsoft Excel for Windows has encountered a problem and needs to close. W

i have the attached problem anytime i tried to open a BW query in excel:Microsoft Excel for Windows has encountered a problem and needs to close. We are sorry for the inconvenience", Please inform if there is a work arround, i have re-install excel , likewise SAP many times but nothing

Hi,
I would suggest you check with any other colleague if they are able to run the same or not. Running BEx report depends hugely on the front end capacity and performance. Please check if anyone else can run the same report, with the same front end RAM, then it might be the problem with your installation.
Also you can try with the latest patch for GUI s/w.
Regards,
Debasis.

Will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

yes, though you may need to use compatibility mode to install.

My (4G) iPod's screen adhesive came off, it's home botton is broken, and it also stopped working I want to get it fixed how much would it cost to get it fixed?

My (4G) iPod's screen adhesive came off, it's home botton is broken, and it also stopped working I want to get it fixed how much would it cost to get it fixed?

Apple at this time does not repair iPods, but assuming that that iPod is not in multiple pieces will replace the entire iPod for a flat fee; see the Repair Pricing section here:
http://www.apple.com/support/ipod/service/faq/
There are independent iPod repair services that may be able to perform a repair for less. Do a web search for "ipod repair". It is also possible to purchase parts and find instructions on doing a repair yourself, though it's not particularly easy. Note, though, that if you elect to have the iPod serviced by an unauthorized shop or perform a repair yourself, all further support from Apple will be void.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base before you post a question.

I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together.

My phone doesn't have any cellular phone functions...but it CAN send text messages and access data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, the last two have this problem and the first stopped working all together. I've had new sim cards put in, ive done hard resets on the phone, i've rebooted the phone, done battery pulls, and tech support has reset the signal to my phone. Nothing has worked. (I just "upgraded" <- lol.... and my old phone IS turned off.)

Im in 79707. So to recap my whole case: I upgraded my device using the verizon wireless website. I received my phone and switched my old SIM card from my Droid Razr Maxx HD into the new Galaxy S5. Everything worked fine until the next morning (May 31st) when I woke up and the phone wouldn't turn on. I took the phone to the local Verizon store and they were also unable to turn it on. They issued me a new Galaxy S5 (referred to as phone 2) and switched my SIM card into that one.
With PHONE 2 i was able to make calls and receive calls, along with text and data for approximately four hours. After that, i was unable to use the phone function of the device, but text and data were still functioning. I took PHONE 2 back to the Verizon store where they attempted to hard reset the phone twice, they also installed two new SIM cards at the store. After this they would get the same error, which is the phone just reading "Dialing..." after attempting to make a call. The Verizon associate declared the phone "DOA" and issued me another Galaxy S5 (referred to as PHONE 3).
PHONE 3 worked well, with phone text and data featured intact from when I received it on the after noon of the 31st until approximately 2:30PM on June 1st. I contacted Verizon Tech Support via Gmail phone to attempt the correct the problem. They reset the connection, had me do a battery pull, had me close the "phone" application, and erase the data and catche, then restart the phone. All of which had no effect. My phone is still able to receive texts and use data (even with wifi off) it simply cannot make or take phone calls. all it says is "dialing..." when I attempt to make a call. When other phones call my device it rings once on their end and directs them to voicemail, PHONE 3 does not ring on my end.
I have made sure my old phone is completely powered down.

G575 Windows 7 Home Premium activation problem and easy camera wont work

Similar Messages

Maybe you are looking for