G580 (20150) Brightness Hot key Problem

Hello there guys!
   I'm experiencing some problems after the lenovo support techs changed the hard drive of my 4-month G580(20150) laptop.It seemed that they didn't get to install some drivers concerning sound,wlan etc. but i did manage to do this by myself.
  The only issue i didn't solve was the Hotkey concerning the Brightness(Although the Fn+Sound was automatically solved when i downloaded the sound drivers).I've read similar problems from other users and followed the steps by unistalling the Lenovo Energy Management,restarting and istalling the LEM v 8.0.2.5 again but nothing.Problem still there.
  Any ideas about it??
Thanks in advance
Solved!
Go to Solution.

Hello Boogy,
What happens when you press Fn+Up arrow? Have you tried to find the appropriate drivers from here for your machine: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073548
Microsoft Certified IT Professional (MCITP)

Similar Messages

  • Wake up event by hot-key problem with H676MA-E45

    Hi! I would like to use the wake up event by hot key function (Ctrl+Space) of BIOS, but it doesn't work for me. I have enabled it in BIOS, and if I enable that it would wake up on USB event it works, but this way my computer also wakes up for mouse movement and for every other keystroke.  Please help.   
    Thanks,

    Ok. Because this key option is only for Ps2 

  • G580 (20150) Running slow, Bios problem

    Hello 
    I got a little problem with my lenovo g580.
    Not a long time ago i downloaded the bios update from the site and I did everything right but after my laptop restarted I got the message that said that I have to put in the disk of some sort so I checked on the internet if there is something I could do about that. I went to bios and changed the boot option to Legacy BIOS boot mode but after that everything worked fine but after that I noticed performance decrease on the laptop (Longer boot and longer wait time to open programs for about 1st few minutes after the boot).
    I would like to use Lenovo recovery program to recover system setting to the factory setting but IM scared to do that cause of the bios problem I had.
    I would really like someone to help me with this problem.
    Best Regards

    Hi SloAki,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that the computer is not performing as expected, I suggest you to perform the below steps provided to increase the performance of the computer then perform OKR (One Key Recovery) if required if the issue persists even after performing the troubleshooting steps.
    Optimize Windows for better performance
    Click here to download User Guide and perform OSRI (Operating System Re-Install) using OKR (One Key Recovery) by clicking on NOVO button provided in the computer, to perform OSRI and refer page no. 2 to locate the NOVO button and page no. 34 for the steps to perform OKR.
    NOTE: Please backup the data in the computer before performing OSRI, as the data will be completely erased.
    Hope this helps!!!
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • LENOVO G580 HOT KEY NOT WORKING

    Sir, I bought lenovo laptop g580 my model no is 
    WB0208030S.. i bought one month before... now the hot keys for brightness, volume , wireless are not working... i can't operate my hotkeys which is now harder to activate wifi for me ...when i press Fn+f5 key the wireless option which displayed before is not now showing it is same for brightness(Fn+down/up) and  volume (Fn+right)....
    Pls help me in this issue any professional from LENOVO soon ... waiting for your reply
    regards..
    SARAVANA

    Hi and welcome to the community!!
    All the hotkeys combinations are controlled by the lenovo energy management software. So i reccomend you to reinstall/install it again. Its setup would be present in the lenovo drive of your hdd. If not then please download it from support site.
    Cheers
    Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
    If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

  • Hp15-r006tu can not increse or decrese bright ness with hot key

    sir ..
    i purchased a  new hp notebook 15-r006tu
    some problem are ----------
    1 .
    i have installed  graphics driver but i can not change led display bright ness with hot key  ( fn + bright change key )  .
    although adaptive  bright ness is off ????
    2 .
    when i  want to stop ( wifi and bluetooth )  using hot key   fn + network botton  button  then only bluetooth is off
    but wifi is still run .
    what is hot key ??? or how i stop  wifi ???

    Hi pravt_hpr006tu,
    I understand that after installing a Graphics card you can no longer adjust that screen brightness or turn off the WiFi with the function keys. I will try my best to help you with this.
    For the WiFi, I suggest that you download and install the HP Wireless Button Driver, then follow the steps in this document for Airplane Mode (Windows 8) to make sure this has not been turned on.
    For the screen brightness, follow the steps in this document for Resolving Problems with the Brightness of the Display and here is one for Fix : Stuck brightness controls / hotkeys not working in Windows 8 , 7 , Vista & XP for updating drivers. This should help with your brightness issue.
    I hope this information helps, please let me know how it goes.
    Good luck and have a great day!
    I worked on behalf of HP.

  • Hot keyes for monitor brightness on SL510

    I have very annoying problem with hotkeyes for adjusting monitor brightness! After last version of hotkeyes driver they don't work. I can't increase or decrease brightness! Pressing them down and can't change anything. And there is something more! For example I have adjusted some level from power manager and everything looks good until I don't try to manage brightness with hot keyes. I doesn't matter if i want to increase or decrease brightness, it just goes to maximum level!
    Anyone knows something for this problem?
    Many, many thanks in advance
    Solved!
    Go to Solution.

    Hi All,
    Welcome to Lenovo Forum! DaemonDriver, your name somehow caught my attention
    Understand that it seems there is problem with the brightness hotkey even with the latest hotkey driver v3.02. To further the investigation,  may i know
    what OS (home? 64bit?) are you using?
    currently using v3.02 ?
    machine type number (e.g. 7660-14A)
    power manager version?
    Hope to hear from you soon.
    Cheers,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • G580 20150 problem game automatically shut down

    Dear Lenovo Community!
    I have bought my Lenovo G580 (20150) this summer, and ever since, I have been facing an annoying problem. When I try to play a game (regardless of its system requirements), after a few minutes, the laptop shuts down suddenly automatically without any previous warning or explanation after rebooting. I have already tried World of warplanes, Empire Total War and the new Tombraider as well, but the result is the same. However, there is no lagging even on medium-high settings. Besides, the laptop works fine without problems when I use other non-gameing programmes.
    I sent it back to a local laptop service (I have bought from them), but they said that they didn't manage to find any problem.
    What should I do? Please, help me.
    Best regards
    PS: I am not a native speaker, so If I was not clear, please let me know and I will try to explain it better.

    Ah, I forgot to mention that I use win 8 x64, it may be important.

  • Problems with hot keys in iTunes

    Hot keys do not work at the Russian keyboard layout.
    This problem appeared in a previous version of iTunes, and not fixed in new 7.6.0.29. Hot keys work only if change keyboard layout on English.
    OS MS Vista Home Premium Rus

    Apologies for not including all the necessary information for assessing the problem.
    My machine is an iMac 24" Intel 3.06 Mac OS X Leopard 10.5.7 and Mail question, I think the 3.0.
    In my Spanish system, the format has a menu option that says *Indentation->Increase (Command +])* and *Indentation->Decrease (Command + [)*, but does not perform its function well unless it is configured a U.S. keyboard If you have a Spanish keyboard, not working properly.
    Can it be possible to be different menus for the languages English and Spanish? Can I edit the keymap to correct this behavior?
    Thanks in advance
    C. Hernández.

  • Problem with my macbook air brightness control key

    i have a problem with my macbook air.my brightness control key ( F1 & F2 ) dont work.what can i do ?

    If keys on your keyboard don't work:
    http://support.apple.com/en-us/HT203162

  • G580 (20150) Brightnes only two different settings 1 win 8.1

    I have a g580 (20150) and i´m using win 8.1. I have a similar problem. My brightness-controls via the fn-buttons work, like every other fn-shortcut, but there are only 2 brightness settings working. i have either very bright or less bright. every other step in between does not work. before i reinstalled i had like 12 different brightness-steps from very bright to almost completely dark. even if i use the windows brightness-settings i have only these two brightness-levels...**bleep**...i have installed all drivers from the lenovo page including intel drivers, nvidia drivers and energy manangement and also the newest drivers from intel and newest energy management drivers. i have always only 2 brightness-levels. adaptive brightness is switched off. help please...

    Hi Me22,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with brightness in your G580 laptop.
    To change the display brightness on a laptop
    Open Power Options by clicking the Start button , clicking Control Panel, clicking System and Security, and then clicking Power Options.
    Move the slider next to Screen brightness at the bottom of the screen. The brightness changes automatically.
    Also try to connect the external monitor for the issue.
    Also try to perform color calibrate by go to control panel and select appearance and personalization, select display option.
    Under display option select calibrate color option and follow the onscreen insrtuctions.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Elitebook Hot Keys after Windows 10 Upgrade

    Hi Board, I got a brand-new Elitebook 840 last week with Win7 and straight upgraded to Win10 64-bit yesterday. It is running fine so far unless there is one big thing, certain hot keys (FN + F9 for example) are not running. You know, these little keys most of us use a lot to adjust the brightness or the volume. In my case, there is the problem with FN + F8, F9 and F10 (mic off, screen brightness down and screen brightness up). Other keys are working fine (e.g. volume). Does anyone have a specific link for a Win10 driver for that problem. I was looking for about a half an hour but did not find anything (especially not the solution for Win8 proposed with the Hot Key Driver). It might be my problem due to the fact that I am not used to the new HP page. Any help is appreciated a lot, Greets from Switzerland

    DonQuijote wrote:
    Does no one have any suggestion? :-(I have an Elitebook 840 G1 and use HP Hotkey 5.0.28.1 version of it. Everything worked fine, except the Mute Mic witch is on fn-F8 on my model. I donwloaded the Audio driver, IDT, for Win8.1 and now everything  Hotkey is working.

  • How do you get the hot keys / keyboard shortcuts to work?

    I have the free trial version of Photoshop. I am new to Photoshop, I am just starting to learn how to use it. I notice that some of the shortcuts/hot keys don't work.
    For example, one basic hot key that does not work is the F7-key. The F7-key opens and closes the layers palette.
    Another hot key that does not work is the spacebar. My teacher taught me to hold the spacebar down when you want to move the canvas around. When I am in handtool mode I hold the spacebar down, I then apply pressure on my laptops touchpad, I then slide my finger across my laptops touchpad in order to try and move the canvas, but the canvas does not budge.
    Some shortcuts work. For example, tapping the F-key multiple times will expand and reduce the size of Photoshop.
    Closing my web browser did not resolve the problem. Updating the software did not resolve the problem.
    I am eager to learn Photoshop, but it's hard, and probrably a waste of time, to try and learn Photoshop when some of the softwares hot keys don't work. Anyone have a solution they can offer?
    Thank you,
    Jennifer
    Toshiba X75 / Windows 8 / i7-4700MQ / GeForce GTX770M / 32GB RAM

    hello.. i want to ask your something about your laptop... i am actually planing to buy new laptop.Toshiba X75 or MSI GS70 .. i am not gammer. never play game on laptop last 6 years... my laptop 24hrs on.. and i do design...  so how is your Toshiba X75 performance for designing.. i read on internet. Toshiba X75 have overheating problem.. but the people complain most of them gammer... as i don't play game on laptop.. will i face same thing ?

  • Touchpad hot-keys don't work after installing Wii XP on Satellite A200-1HV

    Synaptics hot-keys after installing WinXp doesn't work.
    http://i043.radikal.ru/0805/c5/09a7324bc1d2.jpg
    On Vista i touch "Two arrows" touchpad lite up blue colour but now this does not happen.
    I installed driver from Toshiba web-site for Win XP.
    How to on hot-keys on touchpad?
    From Russia with love = )

    May be i said not good, about problem? I will try tell about my trouble. In Windows Vista Home Basic, when i touch "2 arrows" (You can see it, on screenshot, in up-right angel), after that, touchpad Began fluoresce by the blue colour, and after that i push 1 button from 6 buttons on touchpad (they all in red circle) and starts tha application. But no, when i touch "2 arrows", nothing happened. Is it information help to solve problem?
    P.S. I try phone to Support, but, now in Russia we have holidays = (
    Sincerely your JIABP.

  • How do I turn off hot key commands for the application menu/main nav?

    (I am using Photoshop CC on windows 7 64bit)
    I continue to have this problem which in many ways slows down my workflow. It is a bit difficult to explain so bare with me here.
    When I am working through the different functions and tools like switching from the polygonal lasso tool to duplicating a layer and then nudging the image with the directional keys the application menu/main nav is selected instead of the designated hot key and I need to hit esc twice to exit the main nav selection and go back to the tool I was using... “I did say this would be hard to explain”.
    Let me paint a specific scenario that causes this to happen:
    I want to create a mirror reflection for a product. I first duplicate the product image, then I flip it vertically and drag it to the bottom of the base image. Then I hit the directional up button to nudge it into place but this doesn’t work because by hitting the directional button ‘File’ from the main nav is selected. In order to return to the ‘move tool’ I need to hit esc twice or hit the mouse button once. This may not sound like a big deal and it’s not but do this 500 times a day for a week with the ‘polygonal lasso tool or PLT’ and tell me it’s not a big deal after that. When using the ‘PLT’ you have no option but to hit the esc button twice because if you click the mouse button you place an anchor for the PLT and chance loosing anything you have already preselected with the PLT.
    Anyway, moral of the story is... I have a mouse which is more than proficient in selecting File, Edit, Image, Type and any other main nav query. I would love the hot keys to select just the tools and simply leave the main nav out of it... when I first purchased CS5 this function was not apparent. It was only after an update or maybe I blindly changed a preference and poof... every second hot key I push I select something from the main nav which is a completely pointless and annoying function for me which I have never used and never ever will.
    Please Adobe tech masters, help me! I will be forever in your debt.
    Cheers,
    Tony

    Not a problem in the Adobe software. Something is wrong with your input devices or you have something on your system that instates global, system-wide shortcuts that may conflict with application specific ones. You need to figure out what it is.
    Mylenium

  • Satellite L300 - Hot key function is not working

    After the superb help I got from Jimi I'm hoping I can solve my last problem, I have changed my OS from Vista to WXP and I have managed to get all drivers working even though some from the Toshiba site dont work like the Wi-Fi, I have managed to acquire from other places. The only one I cannot get to work is the hot keys , It states TOSHIBA COMMON MODULE NOT FOUND! Everything else works o.k. after using Nlite (Cracking Bit Of Kit)
    My Laptop Is the Sat L300 - 1AQ Model PSLB8E-OOKOO
    Many Thanks for your Help

    Hello
    Ivan is right. You must install Common modules. It must be installed at first before you start to install any other Toshiba designed tools or utilities.
    Common Modules is kind of basic software and all other tools can be installed additionally. Because of that it is very important to install Common Modules first.
    Good luck!

Maybe you are looking for

  • Can I imbed a GIF into a PDF for web viewing?

    I want to email a PDF, and have a GIF animation while viewed from a computer. Is this possible?

  • Wrong charset in jar file

    I'm using NetBeans 6.7.1, Firebird 2.1 with UTF8 charset. "jdbc:firebirdsql:localhost:erpdebug?sql_role_name=TENDERING;lc_ctype=utf8" All works fine until program inside NetBeans. When jar file starts outside IDE - all non-English characters becomes

  • FaceTime Activation Could not sign in

    Hi, i bought ipod touch 4g for facetime. and i can't activate it! it stops on ipod>settings>Facetime='FaceTime Activation, Could not sign in. Please Check your network connection and try again.' i have used all the solutions for facetime but all in v

  • Email Templates localization

    Hi, Is there any elegant way to have localized Email Templates (in multi national environment)? Language Pack doesn't help in that case even in single languege (different than English). Borys Majewski, Identity Management Solutions Architect (Blog: I

  • Stuck pixel on Macbook pro 15" Late 2008 LED screen w/applecare

    Greetings I was researching and I know that Apple cover warranty for stuck pixels, and also I was researching about what stuck pixels are, so I take my mac to a certified apple center where I can process warranties and the manager told me that those