G580 Broadcom wireless lan does not connect to any network

 I am using Windows 8.1 64bit with my lenovo g580 and e530c both laptops having problems with wireless connectivity as follows:when i want to connect to a network after entering the password the network logo in the system tray goes to disabled then returns to not connected status ie a white cross inside a red circle instantly shows up on the signal strength meter on the system tray then in is not connected.i usually try many times to connect and turn off and on the adapter disable and enable but it does not change anything also tried many drivers and the same problemthe router for sure works properlly with all other devicesits really annoying nowso please advise ^___^ thanks in advance

What router?
Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • HT1947 I had this app on my IPhone 4S and never had a problem. Now on my IPhone 5 it only works sporadicly. If I do a hard reboot it will access the Apple tv but on most occacciosn it does not connect. Any one else?

    I had this app on my IPhone 4S and never had a problem. Now on my IPhone 5 it only works sporadicly. If I do a hard reboot it will access the Apple tv but on most occacciosn it does not connect. Any one else?

    Do you mean the Remote app? 
    This app requires both devices be connected to the same Wi-Fi network, are they?

  • My FaceTime is active but it does not connect. Any one know what is wrong with it or how to solve the problem?

    My FaceTime is active but it does not connect. Any one know what is wrong with it or how to solve the problem?

    Please sign out of FaceTime and sign back in. If there's no change, log out or restart the computer and try again.

  • My phone is not connecting to any network despite having activated it already

    Hi,I am in Italy and my phone is not connecting to any network, I am stuck here even though I had enabled roaming on my phone. I have no access to any phone line here to call EE and resolve the issue. Can EE staff please help re-connect my line for roaming? I am using a strangers phone to post this message. I appreciate a quick help since I am stuck here with family.

    Buying a bundle doesn't mean that your device will work aborad you need to make sure roaming is enabled on your account.
    turning on roaming on the device does not give you roaming when abroad.
    If you have a EE extra plan you still need to make sure roaming is enable on your account your plan only gives you free/cheaper calls when abroad.
    If your wanting to enable roaming on your account there could be a deposit to pay if you haven't had the device for about 6 months.
    Unless you have paid the deposit then roaming is not enabled on your account.
    You need to activate roaming on your account by calling 150 from your device or from a landline 01707 315000 before you leave the UK.
    But you can still do this if you are abroad.
    If you have had the device/contract for 6 months or over you can login to your online account and turn on roaming yourself
    Manage this device>Usage controls>Roaming abroad - Allow and Call abroad and turn it on. If the option is not there you need to call
    It can take 24 hours to activate
    If you had this device/contract for under 6 months you need to call customer services on +44 7953 966250 from a landline.
    Once you have activated roaming you can then use this link to see what cost there is and what bundles you can have.
    http://explore.ee.co.uk/roaming/ee
    Please read this about voicemail
    http://ee.co.uk/help/getting-started/setting-up-voicemail/divert-to-voicemail
    And this
    http://ee.co.uk/articles/set-up-your-phone-for-using-abroad
    Also sending a text to 150 with the words of RO country your going to i.e. RO Spain will get you a reply of what the costs will be from that country.

  • How can i find the capacity of my iphone 4s. whether it is 8G or 16G.  I do not want to switch it on as it is not connected to any network at the moment

    how can i find the capacity of my iphone 4s. whether it is 8G or 16G.  I do not want to switch it on as it is not connected to any network at the moment

    If you have the serial number of the phone, put it in here
    To find the serial number without switching it on, read this article:
    Find the serial number and other information for your iPhone, iPad, and iPod touch - Apple Support

  • I am heading out to the US from NZ and I want to buy an Iphone, Will it work in NZ if I buy from Apple and do not connect to any network until back in NZ? Thanks

    I am heading out to the US from NZ and I want to buy an Iphone, Will it work in NZ if I buy from Apple and do not connect to any network until back in NZ? Thanks

    When you get to the States, if you will be in an area with an Apple store for a couple days, call and ask about reserving an unlocked iPhone, it takes a couple days to get it in the store from what I understand.
    The current MBP 15" models are 2.2 and 2.4 GHz i7 machines.  There is a 17" with 2.5 GHz i7.
    The difference, in addition to the slightly faster cpu, is:
    2.2 GHz - Radeon HD 6750 M with 512 MB VRAM
    2.4 GHz - Radeon HD 6770 M with 1 GB VRAM
    Both have the same hard drive, 750 GB 5400 rpm, both have the same primary graphics - Intel 3000.
    So the difference is in the discrete grapics processor, important for heavy video work, heavy gaming...but will drain the battery a lot faster.
    You can get all the details on any Mac computer by going to http://www.everymac.com and click on the model and then scroll down to the exact machine of interest.

  • TS3048 my screen has frozen on problem loading page, my wireless mouse does not connect to the screen (its got new batteries). the keyboard works when you press enter.

    My mouse (new batteries and wireless), does not connect to my screen on my mac. The screen responds when I press enter, but I cannot move around it as there is no mouse.  The screen has frozen on 'problem loading page'.

    My mouse (new batteries and wireless), does not connect to my screen on my mac. The screen responds when I press enter, but I cannot move around it as there is no mouse.  The screen has frozen on 'problem loading page'.

  • My i phone does not connect to any computer via usb

    it charges fine in a wall socket but does nothing when plugged into a compter tried different cables and different computers to no avail please help

    Here are some more things to try:
    iOS: Device not recognized in iTunes for Windows
    If it still does not connect to your PC, get it looked at by visiting an Apple Store or an Authorized Apple Service Provider next to your place. You can also contact Apple Support instead.
    Apple - Support - Service Answer Center
    Has the software on the phone been modified in the past?

  • [SOLVED] NetworkManager does not connect to WiFi networks

    I'm using `networkmanager` to connect WiFi.
    I have selected WiFi Name through `networkmanager`.
    Next, enter WiFi Password.
    But the problem is, `networkmanager` asks me about password again and again and over again and does not connect to WiFi never !!!!
    I'm sure WiFi password that I entered is correct.
    Last edited by kamrava (2014-02-22 05:46:37)

    orschiro wrote:Maybe not satisfying, but can you instead use Wicd?
    My problem was solved. `wicd` was not installed on my system.
    My Problem solved through :
    I have Installed `wicd` and then NetworkManager works like a charm now
    $ sudo pacman -S wicd wicd-gtk
    Thank you all.
    Last edited by kamrava (2014-02-21 11:29:17)

  • Iphone 4S bluetooth does not connect with any other Bluetooth

    Iphone 4S bluetooth does not connect with MacBookPro Bluetooth or any other Phone with Bluetooth. Can someone please help !!!

    Hi There!
    I am having the same problem, my brothers samsung picks up every bluetooth device thats remotely close but the 4s just sits there searching while sitting on the same desk as my iPad2, iMac 24" and headset that worked fine on my old 3 g.
    I am not hugely tek savvy, can anyone explain in easy speak (the kid at the local apple reseeler told me the new bluetooth used on the 4s is not compatible with the older bluetooth devices.... hmmmmmm)
    There must be a solution..... Thanks in advance

  • Wireless LAN does not work after restart

    Hey
    My brand new laptop suddenly went blank earlier today and when I restarted it I noticed my wireless internet won't work. It is also asking me to install some new driver, the Network Controller? I am confused as everything was working fine and suddenly it's not. Anyone any ideas? :-/

    Hi,
    maybe you should try to install the driver for your wireless lan card. I mean, if some application damaged the driver or installed something which interferes with the wireless lan card then you should try to fix it with an reinstallation of the driver.
    Heres a [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] to the drivers download page from Toshiba. Pick your model and your operating system and download the driver which fits for your wireless lan card.
    Greets

  • Wireless receiver does not connect

    My wireless receiver powers up, connects to the access point (connection success message shows, 5 signal bars stay lit), then please wait message shows. The green link light comes on, the blue hd light comes on and then goes out. The power light flashes for a minute or so then all 3 lights on the receiver and the process starts over.
    This is the 2nd box AT&T has sent due to the same issue. I have another wireless receiver that works with no issues. Main tv hooked to the dvr works fine with no issues.
    Any ideas?

    Try pulling the power on the RG, the WAP & the  two STBs.
    Wait for all green on the RG, replug the WAP & the STBs one at a time. TRy the troublesome one first.

  • My iPhone 5S can't find and does not connect to wifi networks. Occasionally will connect for a few minutes but then drops  and won't connect or find wifi network again

    A
    Any ideas why my iPhone 5s won't connect to wifi networks. Sometimes does find the networks and others finds them, connects for a few then drops

    You do not say if you tried any diagnostic steps yet. The first thing to do is to do a reset or reboot of the phone. This does not erase anything on the phone and is akin to completely shutting the phone off and then a fresh reboot.
    First close all apps - double click on the home button and whisk away the apps toward the top of the phone to close the app.
    Now press the home button once to go back to the regular menu screen
    No press and hold the home button and the sleep/wake button the the top right side together for 10 seconds. The phone will turn off and reboot.
    See if that fixes it.

  • Wireless Printer Will Not Connect To Any Machine

    Okay so just want to start out saying any help is appreciated, haven't used a forum before so hoping for any answers.
    I have a HP Photosmart 5510 All in One B111a printer
    Trying to connect to 2 laptops 1 Win7 64 bit - 1 Windows XP Professional SP2
    I have had the printer for around a month - Set it up on my Win7 laptop no problem, needed to connect to the Win XP laptop, and after turning it on it will not connect to either randomly
    It seems so far that the printer is connected to the network according to what it says, and both laptops install the software okay but when searching for the printer neither can find it, it then resorts to searching via IP where it still cannot find it.
    So far I have attempted to reset defaults on printer, reset network defaults on printer, change the IP address, update the IP address, reinstall the software, reinstall the driver, install the full feature installation package, the network diag tool, it cannot seem to find the printer at all even though on the printer screen it states it's connected to the network fine.
    It works fine through a cable and at one point i made a WPS connection via my Win7 laptop but couldn't really figure out what to do next and if it would help my situation so disconnected.
    I don't know whether this is down to some stupid mistake I've made/something basic I've missed (it's my first printer) or an actual problem
    Please help!

    What router?
    Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • MacBook Air 6,2 does not connect to 5GHz network

    Hi,
    My problem is about wi-fi connection. When I try to connect to my network (Time Capsule 5 GHz), it doesn't connect. Password is right.
    Also I try to connect using terminal, and it show me this output:
    Failed to join network SML TC 5 ГГц.
    Error: -3905  The operation couldn’t be completed. (com.apple.wifi.apple80211API.error error -3905.)
    The Mac connect good to regular wi-fi network. My iPhone connect to 5 GHz TC without any problem.
    So, can you help me with this issue.
    PS. I can give you any required additional info.

    vzw-user wrote:
    Hello:
    I just purchased a new Motorola DROID 2 Global, and am having difficulty connecting it to my home WiFi network. My router is a DLINK 655 router, which I have set to 802.11n only with WPA2 encryption and I do not broadcast the SSID. I have gone through the setup process on the DROID 2 by entering the SSID on the phone providing my password etc. The phone keeps attempting to connect to the WiFi network, but just cannot do so. I have a Lenovo laptop which has no problem connecting to the network at the same time, and I have connect it many times.
    If I change the router setting to broadcast the SSID, the phone will connect. But as soon as I hide it again, the connection will drop. The saved network setting on the phone will show "Not in range" even though I am standing right next to the router, and the phone connected to it just a minute ago when the SSID was being broadcast.
    Has anyone else experienced this problem? Is there a solution to this problem or is this a known limitation of the phone?
    A soft reset may resolve your WiFi connectivity concerns. Please remove the battery from your phone while is ON. Re-insert battery after 10 seconds. Power phone ON and allow it to register applications.

Maybe you are looking for

  • XI study material needed

    Hi Everyone,   I'm an abaper and now I would really like to learn XI.  can anyone tell me where can I find good study material for beginners like me. I need some tutorials that explains everything from scratch. thanks in advance. Pooja.

  • 1.8" Enclosures

    Hello, I have an HP Elitebook 2350p notebook. I need to take out the 1.8" hard drive and install it in an enclosure to take off some data. Do you know what type of enclosure I need. There seem to be SATA, ZIF and LIF enclosures available. Many thanks

  • Compiling error: "checking for mtc_init in -lmatc... no"

    Hello I'm trying to compile the elmer fem from svn via a selfmade PKBUILD. I've got an error message: "checking whether we are using the Microsoft C compiler... no checking for mtc_init in -lmatc... no configure: error: libmatc ==> FEHLER: Ein Fehler

  • Divide bug in Labview?

    In labview, if you divide fractional numbers, you end up with a rounding error. For example if you use quotient/remainder and divide 0.6/0.2 the quotient should be 3, but it is 2 instead. This acts exactly the same as doing that divide and then using

  • Grant All Script

    Hi All, I have a schema called PROD. I have a user called user_x. PROD schema has Many different tables. I would like to write a script to grant select on all PROD tables to user_x, This is my first time doing such a script, therefore I don't know ho