G580 Keyboard/Touch Pad/Mouse doing the strangest things

I hope I am posting in the right section. Either way, I hope that someone would have an idea what the hell is happening with my laptop. It was working fine for a couple of months, and out of nowhere, from yesterday it started doing the craziest stuff I've seen any PC/Laptop do.
The buttons on the left don't work at all (the num pad numbers). The numbers above the alphabet keys write only symbols e.g.: 12345.. --> !@#$%..., and nothing can change that. The windows key doesn't work at all, and other strange keyboard behavior. And that is not all. On top of that, when I click an icon on the desktop, all the other icons become marked as well, and when I open "This PC" (win 8.1), it opens not only "My computer", but 10 more folders. I cannot undo it, it does that in every folder I go in, it just marks everything, and even if I click on empty space, they still stay as "marked".
Things get even more strange. The problem is not fixed by restart, safe boot or restore point (I tried them all), it is fixed by restarting the PC, but while its booting, I spam F2+F8+F12 at the same time, and when the laptop loads, everything works just fine, like nothing ever happened. But when I restart it (without spamming the F2+F8+F12 keys), it goes bad all over again...
I have never seen such strange behavior out of a laptop, like ever. I am sorry if my description of the problem is not good enough, but I hope someone has the slightest idea what is going on.

hi daniel2215,
Welcome to the Forums.
The weird behavior of the number keys only shows symbols and all the icon on the desktop gets highlighted by clicking only one icon is most likely caused by a defective shift key as it's the same behavior when you have icons listed vertically and you hold shift key and click the icon at the bottom (same goes to folders).
Things that you can try:
1. Use Passmark's Keyboard Test to check the input of the keyboard keys
2. Use a live cd (i.e. Ubuntu Live) to isolate if the issue is OS level. If the same thing happens to the live OS, you most likely have a defective keyboard and you need to contact lenovo for service.
Note:
For models preloaded with Windows 8, you may need to turn off UEFI, Secure Boot, and OS Optimized Defaults to Disabled/Legacy mode/Other OS mode for the Live OS to work.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

My HP ProBook S-series laptop touch pad mouse does not respond to me

My touch pad responds to my tech guy, to my friends, but not to me! It's like my fingers don't work on it, regardless of the pressure I use or the part of the pad I touch. Other than getting a new set of fingers - which in itself is problematic - what can I do about this? Has anyone else had this problem? It's brand new & this was a problem from the get-go. I had an old Dell latitude D600 & it worked fine for me.
Please help!

Well changing fingers is no easy task so I think we better find another solution. Have you tried other fingers? Also make sure the touchpad has not been locked by firmly tapping the top left section of the pad. This is how you can quickly enable or disable the touchpad.
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. Now the cursor moves but cannot select anything. Suggestions?

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. When opening up a browser or application, the cursor moves but cannot select anything. Suggestions?

Maybe something in these Apple support articles will help.
Keyboard Doesn’t Work
Keyboard Keys Do Not Respond
Keyboard/Mouse – Troubleshooting Wireless

My wireless Apple keyboard won't connect, it just keeps blinking to pair, but nothing connects. I even tried hooking up another wireless I have and it does the same thing. Should I delete it and set it up again?

My wireless Apple keyboard won't connect, it just keeps blinking to pair, but nothing connects. I even tried hooking up another wireless I have and it does the same thing. Should I delete it and set it up again?

Hey Apple Health,
Welcome to Apple Support Communities! There's an article that helps to resolve issues with wireless keyboards. I'd take a look at it, go through the troubleshooting steps, and see if that resolves the issue for you:
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048
Best,
David

IOS 7 doesn't work on iPod touch 4g, so does the mean its the end for this device? Or are they going to make updates specially for lower devices an apps that are compatible ??

iOS 7 doesn't work on iPod touch 4g, so does the mean its the end for this device? Or are they going to make updates specially for lower devices an apps that are compatible ??

Which apps remain compatible will be up to the individual developers who sell those apps. There will be no further iOS updates, but those aren't really necessary to continue to use and enjoy your device. I still have an iPad 1 running on iOS 5, and it is fully functional.
The App Store has an app called VintApps 3.1.1 that is specifically geared toward iOS 3.1, however, you would probably be able to run most of those apps on your iPod, and considering that there will be a rather large market for iOS 6 apps users, it is not likely that you will see a significant reduction in choices any time soon.
It is not the end for the device in any sense except that it is at it's ultimate iOS level. And again, I have an iPad that is at it's ultimate iOS level (iOS 5), and I get new apps all the time that work for both my iPad and my iPhone that runs iOS 6.1.1
No need to fret....
Cheers,
GB

Got my daughter an ipod touch 4th and it wont dothe back up from itunes? I bought my other daughter an iphone 4 and its doing the same thing. Both are locking up itunes too.

Got my daughter an ipod touch 4th and it wont dothe back up from itunes? I bought my other daughter an iphone 4 and its doing the same thing. Both are locking up itunes too. I tried the deactivate/activate that was suggested it still didnt work. I took the ipod to a friend and hooked to her laptop and it synced fine but now trying to sync on mine it wont do it and it has the backup encryption on but no passwords will unlock it. itunes will reccognize the ipod and the iphone but while going thru the sync steps they both get to step 2 then lock up itunes and then says its syncing but will never stop. I am very frustrated and am regretting buying products from Apple.

It seems to be a glitch or bug. Its been officially acknowledged and addressed by Apple. There is no resolution other than waiting for a few days. The Kb article by Apple states it will fix itself on January 7.
http://support.apple.com/kb/TS4510
Symptoms
After January 1st, 2013, Do Not Disturb mode stays on past its scheduled end time.
Resolution
Do Not Disturb scheduling feature will resume normal functionality after January 7, 2013. Before this date, you should manually turn the Do Not Disturb feature on or off.
To turn off the scheduling feature, tap Settings > Notifications > Do Not Disturb and switch Scheduled to Off.

Having trouble with touch screen. Freezes, texting adds more letters, screen locks up. Got new phone, synced new phone and now it does the same thing??

Having trouble with touch screen. Freezes, texting adds more letters, screen locks up. Got new phone, synced new phone and now it does the same thing??

I also tried the Hard Restart and still has the problem?

Touch pad mouse issue synaptics Touchpad v7.5

I have recently upgraded to windows 10 and i have the issue of when I press a key on the keyboard the mouse freezes the normal thing to do here is to disable palm checker (worked on windows 8) However now this dose not work I press a key i can move the mouse for one stroke then it freeze, how do i fix this is it a keyboard issue a mouse issue or a known issue

, Hello and thanks for posting on the HP support forums. The only options with this problem are as follows. Wait for Microsoft to update the list of drivers and software patches over the next little while or roll back to windows 8.1. With any operating system to update the first week it comes out is a risk as to what is going to work 100% or not. When dealing with notebook some of the hardware takes custom drivers and software and the general functions may work but not all of the extra functions. I hope this helps. Thanks again for the post and have a great day.

My I Phone 4 keeps putting me on hold or mute or hanging up on me from my face touching the screen. returned one phone and now my replacement is doing the same thing. this is crazy. my iphone 3 didn't do this!

My I Phone 4 keeps putting me on hold or mute or hanging up on me from my face touching the screen. returned one phone and now my replacement is doing the same thing. this is crazy. my iphone 3 didn't do this! the screen is suppose to turn black when it is near my ear so that you can not do this and then turn on again when you pull it away. This phone is not doing this.

Are you using a case around your phone? If yes, did you make sure the proximity sensor is not covered?
Try without the cover to make sure the sensor is working.
A protection film on your screen can also cover the sensor and result in a dysfunction of the sensor.

My iphone is getting hot to the touch and the battery is rapidly losing power. I reset the phone but it continues doing the same thing.

My phone is rapidly losing battery life - even when it is just sitting idle. The back of the phone is hot to the touch. I reset the phone but it is still doing the same thing. Thanks.

This happens if I upload too many HD photos at once. You are overworking the processor. Just leave your phone off and put it on top of a plastic bag of ice to cool it down. To keep this from happening you have to remove apps from the multitasker by double tapping the home button when the phone is on the home screen or in an app, then hold down on an app, then just press the little red minus signs. This won't delte the app, it just quits them (for example: quitting Skype will not allow you to recieve calls, quitting Facebook will stop you from receiving messages until you reopen the app, quitting the Phone app will not stop you from getting calls or texts though). This will save a great deal of battery.

[SOLVED] Some keybindings in i3wm doing the wrong thing

I've been using i3wm for about a year now, and up until today it's worked perfectly.
After an update, some of my keybindings are just plain doing the wrong thing. The rest seem to be working perfectly.
mod-i is for "go to the window to the right", it now opens emacs
mod-k used to close a window. It now has no apparent effect
There's no issue with the keys inside of windows. For instance, I've used the 'i' many times in this post, and it works as expected.
Here is my ~/.i3/config:
# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
# Should you change your keyboard layout somewhen, delete
# this file and re-run i3-config-wizard(1).
# i3 config file (v4)
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
set $mod Mod4
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below. ISO 10646 = Unicode
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, if you need a lot of unicode glyphs or
# right-to-left text rendering, you should instead use pango for rendering and
# chose a FreeType font, such as:
# font pango:DejaVu Sans Mono 10
font pango: Inconsolata-dz for Powerline 8
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# start a terminal
bindsym $mod+Return exec termite
# kill focused window
bindsym $mod+k kill
# start dmenu (a program launcher)
bindsym $mod+w exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+w exec --no-startup-id i3-dmenu-desktop
# change focus
bindsym $mod+h focus left
bindsym $mod+n focus down
bindsym $mod+e focus up
bindsym $mod+i focus right
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+h move left
bindsym $mod+Shift+n move down
bindsym $mod+Shift+e move up
bindsym $mod+Shift+i move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+o split h
# split in vertical orientation
bindsym $mod+semicolon split v
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+r layout stacking
bindsym $mod+s layout tabbed
bindsym $mod+space layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
# bindsym $mod+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# focus the child container
# bindsym $mod+d focus child
# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
# Scratchpad stuff
bindsym $mod+bracketleft scratchpad show
bindsym $mod+bracketright move scratchpad
# reload the configuration file
bindsym $mod+Shift+r reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+p restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+f exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym h resize shrink width 10 px or 10 ppt
bindsym n resize grow height 10 px or 10 ppt
bindsym e resize shrink height 10 px or 10 ppt
bindsym i resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 10 px or 10 ppt
bindsym Down resize grow height 10 px or 10 ppt
bindsym Up resize shrink height 10 px or 10 ppt
bindsym Right resize grow width 10 px or 10 ppt
# back to normal: Enter or Escape
bindsym Return mode "default"
bindsym Escape mode "default"
# Monitor configurations
# V H
# exec (xrandr --output DVI-D-1 --auto --rotate left && xrandr --output DVI-D-2 --auto --rotate right --right-of DVI-D-1)
# H V
# exec (xrandr --output DVI-D-1 --auto --rotate normal && xrandr --output DVI-D-2 --auto --rotate left --right-of DVI-D-1)
# V V
# exec (xrandr --output DVI-D-1 --auto --rotate left && xrandr --output DVI-D-2 --auto --rotate left --right-of DVI-D-1)
# H H
exec (xrandr --output DVI-D-1 --auto && xrandr --output DVI-D-2 --auto --right-of DVI-D-1)
exec setxkbmap us -variant colemak -option terminate:ctrl_alt_bksp,grp:rctrl_toggle,compose:ralt,ctrl:nocaps
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
output DVI-D-1
position top
# status_command cat
status_command $HOME/bin/barinfo
tray_output DVI-D-2
mode dock
# These are the colors for the window borders, so I'm going to apply them here
# BorderFrame Border Title NextWindowGoesHere
# client.focused #268bd2 #268bd2 #fdf6e3 #93a1a1
# client.focused_inactive #002b36 #002b36 #d0d0d0 #93a1a1
# client.unfocused #002b36 #002b36 #d0d0d0 #93a1a1
# client.urgent #dc322f #dc322f #fdf6e3 #cb4b16
colors {
background #222222
focused_workspace #222222 #222222 #eeeeee
active_workspace #222222 #222222 #cccccc
inactive_workspace #222222 #222222 #aaaaaa
urgent_workspace #ee0000 #ee0000 #ffffff
# Solarized
# background #073642
# focused_workspace #073642 #073642 #eee8d5
# active_workspace #073642 #073642 #2aa198
# inactive_workspace #073642 #073642 #268bd2
# urgent_workspace #dc322f #dc322f #fdf6e3
bar {
output DVI-D-2
position top
status_command cat
# status_command $HOME/bin/barinfo
tray_output DVI-D-2
mode dock
colors {
background #222222
focused_workspace #222222 #222222 #eeeeee
active_workspace #222222 #222222 #cccccc
inactive_workspace #222222 #222222 #aaaaaa
urgent_workspace #ee0000 #ee0000 #ffffff
# Application keybindings
bindsym $mod+c exec firefox
bindsym $mod+shift+c exec chromium --incognito
bindsym $mod+grave exec dwb
bindsym $mod+f exec thunar
bindsym $mod+m exec emacs
bindsym $mod+t exec termite
bindsym $mod+shift+t exec urxvt
bindsym $mod+p exec pavucontrol
bindsym $mod+l exec emacs "~/prj/lysa/en/book"
# Resize windows
bindsym Control+$mod+h resize shrink width 10 px or 10 ppt
bindsym Control+$mod+n resize grow height 10 px or 10 ppt
bindsym Control+$mod+e resize shrink height 10 px or 10 ppt
bindsym Control+$mod+i resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Control+$mod+Left resize shrink width 10 px or 10 ppt
bindsym Control+$mod+Down resize grow height 10 px or 10 ppt
bindsym Control+$mod+Up resize shrink height 10 px or 10 ppt
bindsym Control+$mod+Right resize grow width 10 px or 10 ppt
bindsym Print exec scrot -e 'mv $f ~/pics/screenshots/'
bindsym F13 exec scrot -e 'mv $f ~/pics/screenshots/'
bindsym XF86AudioMute exec pamixer --toggle-mute
bindsym XF86AudioLowerVolume exec pamixer --decrease 5
bindsym XF86AudioRaiseVolume exec pamixer --increase 5
bindsym $mod+F10 exec pamixer --toggle-mute
bindsym $mod+F11 exec pamixer --decrease 5
bindsym $mod+F12 exec pamixer --increase 5
bindsym $mod+F7 exec mpc prev
bindsym $mod+F8 exec mpc toggle
bindsym $mod+F9 exec mpc next
bindsym $mod+Shift+u move container to workspace prev
bindsym $mod+Shift+y move container to workspace next
bindsym $mod+u workspace prev
bindsym $mod+y workspace next
# Panel things
exec deluge
# exec dropbox
exec google-musicmanager
exec $HOME/bin/gmail-notifyd
exec nm-applet
exec parcellite
exec mpd
# exec ncmpcpp pause
exec urxvtd
# Non-panel things
exec compton
exec dunst
exec emacs --daemon
exec thunar --daemon
exec redshift -l 40.7500:111.8833
exec nitrogen --restore
exec urxvtd
# Solarized
# client.focused #268bd2 #268bd2 #fdf6e3 #93a1a1
# client.focused #f336a2 #f336a2 #fdf6e3 #93a1a1
# client.focused_inactive #002b36 #002b36 #d0d0d0 #93a1a1
# client.unfocused #002b36 #002b36 #d0d0d0 #93a1a1
# client.urgent #dc322f #dc322f #fdf6e3 #cb4b16
# BorderFrame Border Title NextWindowGoesHere
client.focused #00eeee #00eeee #eeeeee #aaaaaa
client.focused_inactive #222222 #222222 #dddddd #aaaaaa
client.unfocused #222222 #222222 #dddddd #aaaaaa
client.urgent #ee0000 #ee0000 #ffffff #aaaaaa
focus_follows_mouse no
for_window [class="^.*"] border pixel 6
new_window 1pixel
^ That's the ~/.i3/config for my desktop machine
The same thing is happening on my other computer, so I don't think it's an issue specifically with my machine.
My laptop's ~/.i3/config:
# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
# Should you change your keyboard layout somewhen, delete
# this file and re-run i3-config-wizard(1).
# i3 config file (v4)
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
set $mod Mod4
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below. ISO 10646 = Unicode
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, if you need a lot of unicode glyphs or
# right-to-left text rendering, you should instead use pango for rendering and
# chose a FreeType font, such as:
font pango: Inconsolata-dz for Powerline 9
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# start a terminal
bindsym $mod+Return exec termite
bindsym $mod+Shift+Return exec termite
# kill focused window
bindsym $mod+k kill
# start dmenu (a program launcher)
bindsym $mod+w exec dmenu_run
# There also is the (new) i3-dmenu-desktop# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
# Should you change your keyboard layout somewhen, delete
# this file and re-run i3-config-wizard(1).
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
# change focus
bindsym $mod+h focus left
bindsym $mod+n focus down
bindsym $mod+e focus up
bindsym $mod+i focus right
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+h move left
bindsym $mod+Shift+n move down
bindsym $mod+Shift+e move up
bindsym $mod+Shift+i move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+o split h
# split in vertical orientation
bindsym $mod+semicolon split v
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+t layout tabbed
bindsym $mod+space layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# focus the parent container
bindsym $mod+a focus parent
# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
bindsym $mod+u workspace prev
bindsym $mod+y workspace next
# Scratchpad stuff
bindsym $mod+bracketleft scratchpad show
bindsym $mod+bracketright move scratchpad
# reload the configuration file
bindsym $mod+Shift+r reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+p restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+f exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
bindsym $mod+Shift+k exec killall -u pete
exec setxkbmap us,ru -variant colemak, -option terminate:ctrl_alt_bksp,grp:rctrl_toggle,compose:ralt,ctrl:nocaps
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
position top
status_command $HOME/bin/barinfo
colors {
# background #222222
# focused_workspace #222222 #222222 #eeeeee
# active_workspace #222222 #222222 #cccccc
# inactive_workspace #222222 #222222 #aaaaaa
# urgent_workspace #ee0000 #ee0000 #ffffff
# Solarized
background #073642
focused_workspace #073642 #073642 #eee8d5
active_workspace #073642 #073642 #2aa198
inactive_workspace #073642 #073642 #268bd2
urgent_workspace #dc322f #dc322f #fdf6e3
# Application keybindings
bindsym $mod+c exec firefox
bindsym $mod+grave exec xombrero
bindsym $mod+f exec thunar
bindsym $mod+m exec emacs
bindsym $mod+p exec pavucontrol
bindsym $mod+r exec thunderbird
bindsym $mod+l exec emacs "~/prj/lysa/en/book"
bindsym Control+$mod+l exec $HOME/bin/startlysa
# Resize windows
bindsym Control+$mod+h resize shrink width 05 px
bindsym Control+$mod+n resize grow height 05 px
bindsym Control+$mod+e resize shrink height 05 px
bindsym Control+$mod+i resize grow width 05 px
bindsym Control+$mod+Left resize shrink width 05 px
bindsym Control+$mod+Down resize grow height 05 px
bindsym Control+$mod+Up resize shrink height 05 px
bindsym Control+$mod+Right resize grow width 05 px
bindsym Print exec scrot -e 'mv $f ~/pics/screenshots/'
bindsym XF86AudioMute exec amixer set Master toggle
bindsym XF86AudioLowerVolume exec amixer set Master 8%-
bindsym XF86AudioRaiseVolume exec amixer set Master 8%+
bindsym $mod+F7 exec mpc prev
bindsym $mod+F8 exec mpc toggle
bindsym $mod+F9 exec mpc next
bindsym $mod+F10 exec pamixer --toggle-mute
bindsym $mod+F11 exec pamixer --decrease 5
bindsym $mod+F12 exec pamixer --increase 5
# Autostarted applications
# exec deluge
exec cbatticon
# exec dropbox
exec kalu
exec nm-applet
exec parcellite
exec mpd
exec ncmpcpp pause
exec urxvtd
# exec xscreensaver
# Non-panel things
# exec compton
exec dunst
# exec $HOME/bin/gmail-notifyd
exec emacs --daemon
exec thunar --daemon
exec nitrogen --restore
exec redshift -l 40.75:111.8833
exec synclient TouchpadOff=1
# Solarized
# client.focused #268bd2 #268bd2 #fdf6e3 #93a1a1
client.focused #f336a2 #f336a2 #fdf6e3 #93a1a1
client.focused_inactive #002b36 #002b36 #d0d0d0 #93a1a1
client.unfocused #002b36 #002b36 #d0d0d0 #93a1a1
client.urgent #dc322f #dc322f #fdf6e3 #cb4b16
# BorderFrame Border Title NextWindowGoesHere
# client.focused #00eeee #00eeee #eeeeee #aaaaaa
# client.focused_inactive #222222 #222222 #dddddd #aaaaaa
# client.unfocused #222222 #222222 #dddddd #aaaaaa
# client.urgent #ee0000 #ee0000 #ffffff #aaaaaa
focus_follows_mouse no
for_window [class="^.*"] border pixel 5
new_window 1pixel
Here is what I tried:
Restarting X11
Rebooting
Reinstalling i3
None of them had any apparent effect.
Edit:
Upon further investigation, this is a bug in i3: https://github.com/i3/i3/issues/1302#is … t-77648601
Hopefully the fix is coming soon.
Last edited by pharpend (2015-03-09 16:54:04)

Same issue here, on 2 different laptops. Things were working fine, and suddenly my mod+123456789 keys to switch workspace won't work anymore (and maybe others that I haven't noticed yet).
Since I have a Fr-pc keyboard, actually those are:
mod+ampersand
mod+eacute
mod+quotedbl
etc...
By chance, mod+cedilla is working and open and switch to Workspace 5 (instead of Worskpace 9 but let's not be picky..) ! thanks god, life was awful with one workspace.
I hope they'll fix this soon.

TS3274 My iPad charges for a minute or so then stops... When reconnect the chargers, it still does the same thing..

My iPad charges for a minute or so then it stops... I reconnect the charger, it still continues doing the same thing... Any way out pls....

Hello there, batulububa.
The following Knowledge Base article although written for iPhone can be used in troubleshooting your iPad battery issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Specifically the following:
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

My Macbook Air is stopping a few seconds into videos (e.g. Youtube and BBC iPlayer) and is doing the same thing with PDF downloads not

My Macbook Air is stopping a few seconds into videos (e.g. Youtube and BBC iPlayer) and is doing the same thing with PDF downloads which are only partially downloading then stopping. I changed some security settings yesterday but don't think I touched anything else. Can anyone help?

My Macbook Air is stopping a few seconds into videos (e.g. Youtube and BBC iPlayer) and is doing the same thing with PDF downloads which are only partially downloading then stopping. I changed some security settings yesterday but don't think I touched anything else. Can anyone help?

My pc has a virus I just downloaded song from pc to kids ipods now both ipods are not working correctly could the virus be in the ipods, if not why are both not working doing the same thing right after unplugging from pc.

Can an ipod get a virus from a pc that has a virus. After connecting two different ipods to my pc to download music they both are not working correctly, could the virus have transferred to the ipod, if not why would both ipods not work and be doing the same thing? When trying to click on a game it just stays on the main screen.

- I have not heard of a virus that can cause problem with an iDvice that has not been jailbroken.
- Try resetting the iPods. nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Do you hve problems with one game? The same game on both iPods?
Other apps?

I just installed itunes 10 and all it does when i open it is show me the software agreement, and if I click "accept" or "decline" it closes and does nothing else. It does the same thing when i try to play music on it. (By the way, I have Windows XP SP3.)

I just installed iTunes 10 and all it does when I open it up is show me the software license agreement, and if I click either "accept" or "decline" it closes up and does nothing else. It does the same thing when I try to play mp3 files, just opens up the license agreement and nothing else. It also doesn't recognise my iPod touch when I plug it in, thinks it's a digital camera. Please help! (By the way, I have Windows XP SP3.)

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

G580 Keyboard/Touch Pad/Mouse doing the strangest things

Similar Messages

Maybe you are looking for