G580 model 20150 Core i5 is not showing DVD-RW

hi, i have bought new laptop Lenovo G580 model 20150 Core i5 which is not showing DVD Rom (PLDS DVD-RW DS8A8SH) plz help me what should i do now? when going in device manager its showing Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Using Lenovo Essential G580 Intel Core i5 3210m @2.50ghz up to 3.1ghz
Solved!
Go to Solution.

Hi FaisalShoaib95,
Thank you for posting and Welcome to Lenovo Community,
I’d like to ask you to take a copy from the files that you need from C: partition as we will try to recover the system back to the initial state like the first day you got the machine,
I’d like to ask you to perform a recovery for the system please connect the charger and the battery and please turn off the machine,
And please press on the One Key Recovery button the small one next to the power button and then Enter Recovery,
And you will get the options for the recovery please select One Key Recovery and then restore from initial backup and it will start the process,
Kindly check the below link for more information about the recovery:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT062552
After that the machine will start the activation and please check again regarding the ODD and share with us the status of using the ODD.
Hope the information helps. Let us know.
Regards
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

G580 model 20150 Core i5 is not showing warranty

hi, i have bought new laptop Lenovo G580 model 20150 Core i5 which is not showing Warranty on Lenovo Solution Center and on the website as well, i have upgraded bios to win8 64bit, may be its becuase of it or not, plz help me what should i do now? On this site,
http://support.lenovo.com/en_US/product-service/warranty-status/default.page
its giving following error,
Warranty Status Lookup
Error : System Unavailable, IBase information cannot be provided
Using Lenovo Essential G580 Intel Core i5 3210m @2.50ghz up to 3.1ghz
Solved!
Go to Solution.

Hi FaisalShoaib95,
Thanks for posting in the Lenovo Community,
I’d like to confirm to you that this service for the warranty on the LSC isn’t supported in your region that’s why you can use it and if you need to check your warranty you can check the website to lookup for your warranty and if you need me to check this please PMed me with the serial number.
Thanks and Best Regards,
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Core Center does not show up!

HI Guys,
I have this problem while using Core Center. When I install it and restart my pc, my tasklist shows corecell with a processor usage of 50%, but is does not show up anywhere in my taskbar. The program is running, but I cannot see the screen.
MSI 875P NEO-FIS2R with 1.8 bios
Can anyone help me out? I don't understand

I found it !!!!
The problem was my Yamaha SW-1000G. When i remove it from my system Core Center works fine under WinXp.

Finder Not Showing DVD Content

Hey there folks. i have had a macbook for about 6 months now with very minimal problems, but i have just come across one that is bugging me quite a lot.
i have all my h/d backed up on dvd (philips dvd+rw)
i inserted the dvd into the superdrive, but for some reason the content doesn't seem to load properly when accessed in the finder.
it is quite bizarre to be honest...when the cd icon appears on desktop i click it, and it shows the main folder which the contents are inside, but this folder is just empty.
i have roxio toast 8 installed, so i booted that up and it showed all the content no problem.
i right clicked on one of the sub folders from my dvd in toast and then clicked 'reveal in finder' and it showed that folder in the finder ok, but no others.
this therefore proves it is a fault in finder, or some part of my os, and not the dvd itself. this statement is also backed up as i have tried it with all my dvd's and no luck with any in the finder.
i also went to my neighbours to test the dvd on a windows machine and it loaded fine.
i also know this is a recent fault as the dvd's showed fine in my finder when i first bought the macbook.
i installed the 'SuperDrive Firmware Update 2.1' from apple after i saw the problem to see if this fixed it....but it didn't.
does anyone know what is going on here, or have a solution?
if it helps in your response, i initially created the dvd on a windows xp laptop.
help would be GREATLY appreciated.
thanks,
tom
Macbook Mac OS X (10.4.10)

BUMP.
help would be much appreciated.
still stuck with this matter.
thanks.

New 2.8 8 core MP/Leopard not showing 8 cores in activity monitor?

So, I pick up a new 8 core 2.8 today, drive the hour home, wipe the drive and put a fresh retail copy of leopard on it, then I decide to open up Activity Monitor and "view" all 8 of my cores as the dock icon.
Instead I get 1 icon, and in activity monitor I only 1 black box.
On my Macbook, and iMacs I show 2 icons for processors in the dock.
On my 1st gen Mac Pro I show 4 processors in the dock.
and I am not talking about the floating icon that sits in the corner on the desktop, I am talking about the pretty blue cpu usage icon that you can use in the dock.
Why is my Pro only showing one, but About this mac shows 8?.

I also have this problem with my 8-core, 2.8Ghz Mac Pro and activity monitor. I would always put the Activity monitor in my User/Login Items to start up with Tiger & Leopard, and saw 2 meter bars with my dual-core iMac, and now only see 1 with my 8-core MacPro.
If you use the floating window, it will show you 8.
My way around this is to use "Menu Meters" (the latest for Leopard), and I have Menu Meters display all 8-core bars in my Menu bar. Works great - but it's not as pretty as the floating window or dock icon bars from Activity Monitor.
(Also with Menu Meters I have the "show disk activity", "Show download/upload speed" and "Free memory"...it all works great)
So... I'll cast my vote for Apple or a 3rd party company to fix the Dock/Activity Monitor to show all 8-cores in my MacPro!
-Mark

I have 16 gb wifi model brand new but Maps not showing my current location

My iPad is just 2 days old but I don't know what is going on my maps are not able to show my current location I don't
Know what's wrong with this please do suggest me some measures about what to do',and yea I already turned on my location in
Settings then also problem continue ,.,,, pls try to answer my querry

Hi,
I was facing the same issue with my Ipad - wifi.
I have found a simple solution for this but it needs you to have a iphone and period of one week.
if wifi router's mac address is not registered with apple's location services server, the location services on Ipad-wifi does not work, so we need to register wifi router's mac address to apple's server in first place.
If you have a iphone, then try to install 'Find my iphone' app. install it on your ipad also.
Initially when you login to this app with both iphone and ipad, only your Iphone will show location as it has GPS location. and your ipad location will not be reflected on this app.
If you continue to find your ipad using this app on you Iphone, and using your home wifi router, eventually after few days you would be able to track you ipad location, because your wifi router's mac address get registered on apple's server with its gps co-odridnates.
This has worked for my on 3 different wifi routers in last 8 months.
Hope this will hope you.

G580 model 20150 Bluetooth

Hello. I know that here are many toppics about this problem.I dont have in devide manager the bluetooth device.I read them all. The usefull seems to me this one. I did it step by step, but i can still find BT device.My operation system is Windows 8 professional x64. I know that this laptop bluettoth has, because i used it when i had Windows 7 installed on it. Thank for your help.

When I updated my G580 to Windows 8.1 I had to go thru very specific steps to make sure my card was recognized correctly, including downloading the right driver. I was presented with no less than 4 different driver files for my module and I had to try several before finding one that worked.
What worked for me:
1. Download correct drivers from internet (lenovo)
2. Remove all bluetooth and wireless network hardware from Device Manager tree by right clicking on the device and choosing Uninstall option. If asked, choose to remove driver files as well. Reboot machine.
3. Install new drivers from downloaded files, check Device Manager to verify wireless card has been correctly installed.
4. Cold Boot machine (power cycle).
5. On start up, Windows finds new hardware, loads Bluetooth drivers, enables device.
6. Return to Device Manager, verify hardware is working without errors or warnings, reboot if needed.
7. Open Bluetooth Manager, search for devices and pair with one to prove working status.
I had to try several of the files to find that I needed to use an "Atheros" driver for the installed bluetooth to work correctly.

Dv9913cl Notebook not showing DVD drive in system or Device manager, and more

I recently reinstalled the operating system on my stepfathers Pavillion dv9913cl notebook because it was slow and old. After I reinstalled windows I installed all of the drivers from HP's website, and made sure windows was completly up to date. I checked to make sure things on the computer worked, but I forgot to check the DVD drive.
So today when he went to put in a DVD it did not work. I was not present when he and my mom first tried using it, but this is what they passed on:
After putting in a DVD it took a few seconds and then something(I couldn't get them to tell me what) popped up saying something about the DVD region. I couln't get a clear answer on what it told them. My mother said something about it being the wrong region and something about selecting things like US English, and I don't know how what actually popped up for them. I also don't know were this path took them and ended.
Next apparently my mother went searching online. She found a Ask Yahoo that I couldn't relocate that told her to go into help, about windows media player. Then to go to Organize, then layout and show menu bar. Then step two she wrote down is About Windows Media Player -> tech.supportinfo. Specific File to determin codec. Right click file in Library - Properties on file tab - Audio Codec/Video Codec. (I don't know what she was attempting to do here and couldn't get a straight answer. I think the ask yahoo post told her she couldn't play the type of file because of a missing codec, but I dont think that is the problem, I inlcuded what she did though incase somehow it did something bad)
She did some other searching and tried to get into device manager I think to see what it said about the DVD device, but I am not 100%.
**So this is the poiny where I come home. I sit at the computer and pull up device manager. The DVD device is not listed. I looked at every single entry in device manager, nothing has an exclamation point, and nothing says DVD/CD device or anything close.
I went to HP driver website and pulled up the drivers for this laptop. There was not a particular driver there for the DVD player.
I resarted and went into the BIOS and went to the boot order options. The DVD drive does show up there. (I made no changes)
When I insert a DVD or CD nothing happens. I can hear the drive spinning, but nothing happens on the OS. nothing pops up. It doesnt show up in my computer, and I can't find the DVD or CD to play through any program.
I found this support article. https://support.microsoft.com/kb/314060
I tried all 5 of the resolutions. For resolution 3 I got to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}, but in the right pane there was nothing that said either UpperFilters or LowerFilters. When I did some searching I found some other people who had similar problems and fixed it by doing what is suggested in resolution 3 and deleting the entries for UpperFilters and LowerFilters, but they were never there for me to begin with.
Now I am at a loss on what to do next. It seems like when he first put the DVD in the computer it was recognizing the DVD since it said something about DVD region it must have known a DVD was in there, but I never saw that screen. By the time I got to the computer nothing happens when I put any DVD or CD in.
I apologize for the long post, and thank you for any help that can be provided. (Also I don't use Windows, so please try and explain things as layman as possible.)

Hello RonFishing,
Welcome to the HP Forums! I hope you enjoy your experience!
I understand the computer appears to be unable to play DVDs, and the required driver in Device Manager is not found. My response will not be as long as your post, but I will do what I can to assist you!
I do not know what Windows operating system you are running. This will be important in resolving the issue. In the meantime, I welcome you to try the steps in this HP document: Resolving DVD and Blu-ray Movie Problems (Windows 7)
Even though the document is for Windows 7, the steps are similar amongst all versions of Windows. Please try the steps and let me know the results.
Thanks for choosing the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Command, Tab option not showing all open applications

Hi,
Just upgraded to Mountain Lion and now when using the combination of Command+TAB not all open applications are displayed.
This seems like a bug or am I missing something

I want to add to list as having same issue... Even core Apple programs not showing up (Safari, iPhoto) in Command Tab. But Mail, iCal do show up in Command + Tab. Also noticed that only some applications "minimize window into the application icon", while others get minimized to bottom right of Dock. Additionally no "Show indicator lights for open application" appears for those missing programs. I attempted to select-unselect both of those in the Preferences -> Dock options and restart a few times, with no success.
The same programs missing from Command + Tab are also missing a graphic icon in Dashboard view (only Application Name appears).
Issue is new to OS X Mountion Lion, I did not have that problem before.

Staging instance not showing up in Visual Studio

Hi,
As of a few days ago when the transition from "Azure Websites" to the new "App Service" model, the staging websites do not show up in Visual Studio Server explorer.
Details:
Before, if I opened Visual Studio Server Explorer->Azure->Websites I could see both my production and "staging" websites and then click on the staging and do things like connecting a debugger.
Now: Under Visual Studio->Azure->App Service->Default-Web-WestUS only my main website, not its staging, shows up.
Therefore I can't do any runtime things like change files on the fly or debug my staging website.
Thanks

Hello Amitai R,
It is possible and unlikely that this would have to do anything to do with the change in name.
I suggest that you check the following to ensure.
1. Check if the staging slots are availaible within on the management portal.
Please open the management portal and expand your website to check if the staging slots are reflecting under it.
If the slots are available, I suggest that you redownload the publish setting file from the management portal and connect to your Visual studio.
You can refer to this link that will give you information on that:
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-continuous-delivery-use-vso/#step5
Thanks,
Syed Irfan Hussain

My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

General purpose Mac troubleshooting guide:
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form
Troubleshooting: My computer won't turn on
https://support.apple.com/kb/TS1367
Where are your bootable backups and clones stored?
What do you have to boot from to restore or attempt to recovery files that are not backed up?
It won't be a PowerMac. People tend to think they look alike? or mean the same thing.
http://www.everymac.com/systems/apple/mac_pro/specs/mac-pro-quad-2.66-specs.html
Try zap PRAM and SMC Reset. If you have ATI 5770 which many have upgraded to you won't be able to use older DVD or systems than 10.6.5

HT4972 I AM USING WINDOWS XP. WHEN I AM CONNECTING MY IPOD TOUCH MODEL NO. MC 008LL TO MY PC ,CHARGING INDICATION IS COMING BUT NEITHER THE WINDOWS NOR THE LATEST VERSION I TUNE DETECTING MY IPOD. IT IS ALSO NOT SHOWING IN I TUNE WINDOWS.

I AM USING WINDOWS XP. WHEN I AM CONNECTING MY IPOD TOUCH MODEL NO. MC 008LL TO MY PC ,CHARGING INDICATION IS COMING BUT NEITHER THE WINDOWS NOR THE LATEST VERSION I TUNE 10.6.3 DETECTING MY IPOD. IT IS ALSO NOT SHOWING IN I TUNE WINDOWS."DEVICE LIST" IS NOT DISPLAYING IN LEFT HAND SIDE WINDOW OF I TUNE. BEFORE IT WAS WORKING IN ITUNES 9 AND I WAS USING IT. BUT NOW IT IS NOT DETECTIN AT ALL. SO PLEASE HELP ME WHAT TO DO?

Have you tried here:
iOS: Device not recognized in iTunes for Windows

Desktop Software 6.0 (PC) does not show OS 6 system software and core applications

I have installed DM 600_b047 on my PC (running WinXP w/ SP3). I have also installed both OS 6.0.0_rel862 and 5.0.0_rel1385 on the same PC. When I connect my Bold 9000 to the PC, DM shows everything that is installed on the device. However, when disconnect the Bold and I connect my Torch 9800, DM shows only the third-party apps installed on the device. DM does not show the System Software, Core Applications, Phone, etc. that are installed on the Torch.
On another PC (also WinXP w/ SP3), I have installed the same DM and OS software. DM on the latter PC shows all System Software, Core Apps, 3rd-party apps, etc. of both the Bold and Torch.
I would appreciate any suggestions how to get my other PC to show all BB software installed on the Torch. I have already uninstalled and reinstalled the DM and OS software on the one PC. It did not resolve my issue.
Thank you.

Here's how I resolved my issue:
1. On the DM's Applications page, click the "Import files" button.
2. Drill down to the folder containing the .alx files of the BB OS. In my case, that would be "C:\Program Files\Common Files\Research In Motion\Shared\Loader Files\9800M_v6.0.0.284_P6.4.0.120"
3. Select the alx files shown.in the files window..
4. Click the "Open" button of the dialog box.
5. Wait for DM to finish processing the selected files.
Voila! Now I see all the apps.
Maybe RIM's software and/or system engineers can explain how the DM software got into the condition where it apparently had not selected the .alx files.

IPod model A1059, freezes, unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or on windows explorer. What is the problem and how do I fix it?

IPOD model A1059 appears frozen and is unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or in Windows Explorer. What is the problem and is there a fix?

If you are unable to reset the iPod (assuming the hold switch is not in the On position either), then you'll have to let the iPod's battery fully drain. Then connect it to a charger and leave it to charge for a couple of hours.
B-rock

My internal drive is NOT showing up in the event library in Final Cut X. I am also getting a "The operation couldn't be completed. Cannot allocate memory" Any ideas? I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8

My internal boot drive is NOT showing up in the Event Library in Final Cut X. My external raid drive is showing up.
I am also getting error message "The operation couldn’t be completed. Cannot allocate memory" when attempting to create a new "event". Any ideas?
If I had a application disk, I would unistall and reinstall FCPX. I am assuming there is a way do do this without a disk - just have not been able to easliy find out how.
I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8
Thanks

Well it did NOT work. Here is a screen capture as FCPX loads showing the drive while it loads. Then when it is loaded, NO drive showing up in the Event Library ( I have turned off the external drive).
ANY ideas . . . . Anybody . . . . APPLE?

G580 model 20150 Core i5 is not showing DVD-RW

Similar Messages

Maybe you are looking for