G6-2228ee blue-tooth hid device driver problem

recently i purchased HP Pavilion g6-2228ee. it comes with win-8. i updated with windows 10 but
my bluetooth hid device driver have a  issues shown a message "This device cannot start. (Code 10)" pls help update bluetooth hid device drivers

Hi:
Please see if this W7 BT driver and software works...Use the same thing for the dv9K
http://h20566.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&sp​...

Similar Messages

  • Thunderbolt device driver problem

    I have a W540 and running Windows 7 64 bits - and brought a WD My Passport Pro Thunderbolt HDD.  I know it is for Macs - but, I was thinking of reformating the HDD into NTFS once I can get the HDD to mount into Windows.  The Thunderbolt Devices display tells me -
    Thunderbolt Port 1 *-> Western Digital, My Passport Pro. 
    Unfortunately, I have a problem with "Standard AHCI 1.0 Serial ATA Controller" driver - gave me Code 12.  
    Does anybody knows of a replacement device driver to get this HDD to work?  Or recommend an equivalent portable HDD (of at least 4TB) that works with W540 Thunderbolt port.  
    Thanks... WTS

    Update - I think a more fundamental issue is this ...
    Does the W540 BIOS support Thunderbolt hard-disks?  I ask this - because I observe this ... when a Thunderbolt hard-disk is plugged in AND I reboot the computer, it hangs at the BIOS initialisation stage.  Only when I remove the Thunderbolt drive, then the machine can boot up.  
    Also I noticed there is NO option in the BIOS for Thunderbolt - only USB.  
    TS

  • Solaris 10 GA and 64 bit Pentium Processor. Device Driver Problem

    We have a Dell Poweredge SC420 with 3.4 GHz Pentium 4 (EMT64)
    it also has 300Gb SCSI disk and 2 Gb Ram.
    By default this machine tried to boot with the 64 bit kernel then could not load the CADP driver (SCSI CARD). We forced the Kernel to 32 bit by changing the BOOT_FILE from /kernel/AMD64/unix to /kernel/unix.
    The machine is now booted but we are having problems with our PCI device. The device is a DMA Bus master and works fine on another SC420 which has a 2.8GHz Non-64 bit processor running the same release of Solaris. The device driver fails in strategy when we try to bind the dma buffer,(ddi_dma_buf_bind_handle) returning DDI_DMA_TOOBIG when the cookie count is > 1.
    The machine appears to function apart from our device although we have suffered some kernel panics. We cannot ascertain if other devices are performing DMA successfully but must assume that they are.
    Anybody got any ideas, Has anyone else got this processor working?

    My bad. The memory per guest domain is 1GB. Se the Section 1 (NEW) - Hardware http://wikis.sun.com/display/SolarisLogicalDomains/LDoms%20Community%20Cookbook
    Ignore the http://www.sun.com/software/solaris/specs.jsp

  • Unable to Sync Centro with Vista 32; device driver problem

    I currently sync my Palm Centro (Verizon) to my Desktop Computer running Windows XP and Palm Desktop 6.2.2 with no problem. I am trying to move everything to an HP Notebook running Vista Business 32 bit. I disabled Norton Internet Security and loaded Palm 6.2.2 on the notebook but was unable to sync. Error message on the Palm said “The connection between your handheld computer and the desktop could not be established. Please check your setup and try again”. On the notebook the Palm handheld device driver has a “?” besides it. I tried doing a clean uninstall and reloaded Palm Desktop 6.2.2, but it still gives me the same error message. I tried looking for an updated device driver, uninstalling and reinstalling the device driver didn’t help either. Palm Support was unable to fix the problem. I then tried restoring the notebook to the factory condition, and reinstalled Palm Desktop; same error message; Palm device driver still has a “?”. I called HP Tech support. They had me update the Bios and update Vista to Service Pack 2. Still has the same problem. This is driving me crazy! Any ideas???
    Post relates to: Centro (Verizon)

    The system doesn't allow me to browse to PalmUSBD.inf or any other specific file name. It only allows me to browse to the subfolder USB_Driver. When I tried to key in the file name C:\Program Files\Palm\USB_Driver\PalmUSBD.inf and click next I'm told "The location you specified does not exist or cannot be reached."
    I tried uninstalling the driver, then reconnecting to another USB port; driver seemed to install successfully, but then still has "?" and doesn't work. I am not using a USB Hub.

  • WinXP reboots caused by a device driver problem??

    Hi All the experts there,
    I recently bought and installed a MSI 865GM2-LS Motherboard. However, after I installed WinXP, as each time I get onto the web, system reboots and telling me it's caused by a device driver. I installed every device drivers provided in the installation disk. Is there sth wrong with the hardware of just software problem?
    This is really wierd because I've tried WindowsME with exact same hardwares attached and device drivers installed, it works perfectly!
    Please Help!
    MSI 865gm2-ls
    P4 2.6G 800 FSB
    Kingmax 512MB Memory
    Seagate 120G HD
    Pioneer DVD-RW A106
    WinXP Home/Professional

    Sorry, I forgot to mention that there wasn't any problems AT ALL when I use the exact cable modem with another computer that has WinXP installed!! I don't think it's the problem of the modem driver.
    Maybe BIOS configuration problems? Then, what is it? I have gone through numerous times and I can't think of anything I might be mistaken.

  • How can I update the Bluetooth HID Device Driver?

    Hi-
    Can anyone tell me how to do it? I´m trying to pair a Microsoft Bluetooth Notebook Mouse 5000 with a Lenovo T400 running Windows XP Pro with SP3 on it, and with all the latest Windows Update components installed on it  too, with no luck. The mouse is working, took it to the shop to return it, but worked on a laptop running Windows 7, and the bluetooth on my laptop is also working, since it pairs nicely with my cell phone. Tried pairing a Logitech mouse and that´s when I realized the problem might be the driver. I´ve tried updating the HID driver with the device manager, but doesn´t work, nor can I find it on the Microsoft site to download and re-install it. Please help!
    Thanks,
    Enrique

    Download the Bluetooth driver from the T400 driver matrix:
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72858
    I have the same mouse with my T400 and it works fine.
    Also, make sure the mouse is discoverable (light flashes alternating red/green on top) first.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • MTP USB Device Driver problem

    Hi Guys
    I currently have an iPhone 5S and I am trying to connect it to my Windows 8.1 Computer so that it appears as Mass Storage, enabling me to back up photos and videos. I noticed int the Device manager that the "MTP USB Device" has an esclamation mark on it and it states that the driver was unable to verify the digital signiture of the device and cannot be used (Code 52)
    I have tried various methods to try and resolve this issue but I have had no success.
    E.G...
    https://discussions.apple.com/thread/3153566?tstart=0
    https://discussions.apple.com/message/16322708#16322708
    https://discussions.apple.com/message/22972618#22972618
    and various other methods.
    I Contacted Apple support and Microsoft Support but they were unable to help me. The device was working until a week ago and suddenly stopped showing up as a Mass Storage device. It is visable in iTunes and can be used to USB tether, but not USB Storage because of this MTP USB Device error.
    Has anyone got a fix for this that actually works?
    Your assistance greatly appreciated.
    Chris

    Update.
    I have found out that the driver file for MTP USB Device is the file winusb.sys.
    The problem is that it is not digitally signed and windows 8.1 can not verify it's signiture. This is why there is an esclamation mark on the device in device manager.
    I have tried various procedures to fix the problem but none have been successful yet!
    If the driver file was digitally signed, the driver would be fine.
    The search goes on..

  • N500 with PCI device driver problem sound

    hi , i re instal a new windows in my N500, XP SP2, and i downloaded all the driver in lenovo site, extrat all the pacckage, but after all, i still have a problem with the sound, with only driver missing!! this mysterious PCI DEVICE....i try to found in all site about a solution, i updated my HDMI from microsft like they say and try so many other idea without solution....always when i install the file setup in DRIVERS\WIN\AUDIO\52av02ww\XP32    i found a strange message after a while showing "le pilote n'a pas été installé: le peripherqiue correspondant est introuvable" it means that the correspndant device is not found....
    this a copy of the report from everest
    Debug - Unknown
    Motherboard   DMIMOBO: LENOVO KIWDX  
    Motherboard   DMISYS: LENOVO 42335LG  
    Motherboard   SROSA001.86C.0000.D.0810200818    
    Motherboard   Unknown  
    PCI/AGP   14E4-1713: Broadcom NetLink (TM) Fast Ethernet [NoDB]    
    PCI/AGP   197B-2381: JMB38X SD Host Controller [NoDB]    
    PCI/AGP   197B-2382: JMB38X SD/MMC Host Controller [NoDB]    
    PCI/AGP   197B-2383: JMB38X MS Host Controller [NoDB]    
    PCI/AGP   8086-2919: Intel(R) ICH9M LPC Interface Controller - 2919 [NoDB]    
    PCI/AGP   8086-2928: Intel(R) ICH9M/M-E 2 port Serial ATA Storage Controller 1 - 2928 [NoDB]     PCI/AGP   8086-292D: Intel(R) ICH9M/M-E 2 port Serial ATA Storage Controller 2 - 292D [NoDB]     PCI/AGP   8086-2930: Intel(R) ICH9 Family SMBus Controller - 2930 [NoDB]    
    PCI/AGP   8086-2934: Intel(R) ICH9 Family USB Universal Host Controller - 2934 [NoDB]    
    PCI/AGP   8086-2935: Intel(R) ICH9 Family USB Universal Host Controller - 2935 [NoDB]    
    PCI/AGP   8086-2936: Intel(R) ICH9 Family USB Universal Host Controller - 2936 [NoDB]    
    PCI/AGP   8086-2937: Intel(R) ICH9 Family USB Universal Host Controller - 2937 [NoDB]    
    PCI/AGP   8086-2938: Intel(R) ICH9 Family USB Universal Host Controller - 2938 [NoDB]    
    PCI/AGP   8086-2939: Intel(R) ICH9 Family USB Universal Host Controller - 2939 [NoDB]    
    PCI/AGP   8086-293A: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A [NoDB]    
    PCI/AGP   8086-293C: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C [NoDB]    
    PCI/AGP   8086-293E: PCI Device [NoDB]    
    PCI/AGP   8086-2940: Intel(R) ICH9 Family PCI Express Root Port 1 - 2940 [NoDB]    
    PCI/AGP   8086-2942: Intel(R) ICH9 Family PCI Express Root Port 2 - 2942 [NoDB]    
    PCI/AGP   8086-2944: Intel(R) ICH9 Family PCI Express Root Port 3 - 2944 [NoDB]    
    PCI/AGP   8086-2946: Intel(R) ICH9 Family PCI Express Root Port 4 - 2946 [NoDB]    
    PCI/AGP   8086-294A: Intel(R) ICH9 Family PCI Express Root Port 6 - 294A [NoDB]    
    PCI/AGP   8086-2A40: Mobile Intel(R) 4 Series Chipset Processor to DRAM Controller - 2A40 [NoDB]     PCI/AGP   8086-2A42: Mobile Intel(R) 4 Series Express Chipset Family [NoDB]    
    PCI/AGP   8086-2A43: Mobile Intel(R) 4 Series Express Chipset Family [NoDB]    
    PCI/AGP   8086-4237: Intel(R) Wireless WiFi Link 5100 [NoDB]
    please who's have idea about this? who can help me?

    try to run executable files on right click by selecting "run as admin"
    and try to run this first, then try this.
    or try to run lenovo smart downloading.

  • HP Probook 470 G0 - Biometric device (driver) problem

    Hello,
    I have a problem with biometric device, I can't find biometric in device manager. Does anyone know how can i fix it? I installed driver (Validity Sensor) but nothing happens when i enter in device manager.  Does anyone know how can i enable biometric? Thats the whole problem I think, there is no biometrics in device manager. Is that problem with BIOS, can i enable it there or what? I use Win 7, 64-bit.
    Thanks in advance,
    Aleksandar Sretenovic

    Can anyone help me, please???

  • Bluescreen - Software Device Driver Problem

    The problem also occurs with safari beta (3.0.4) and firefox (2.0.0.9). The Bluescreen is reproducible on both browsers with some pages of apple.com (those with Quicktime videos). After uninstalling Quicktime i saw a picture of the XMas-Add on the start page (with the Download Quicktime link). (Quicktime v 7.3)

    Hi!
    Its not easy to say what is wrong.
    First of all, which notebook do you have exactly?
    In your position, I would first check the RAM. There are some special tools and I do this always with Memtest86.
    You can download an ISO image to burn it on a CD from [www.memtest86.com]
    Boot from CD and test your RAM, maybe you will get some errors.
    You can also reinstall Windows with the recovery disk. It could be a software or driver issue.
    If you have more questions, I will try to help you.
    Bye

  • I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

    Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

    I was searching for how to setup the 903+ and my W520 and came to this thread.
    1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
    but if you are going to go BT headset....
    2.  What I did for the 903+
    Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
    Required reboot.
    Activated the Bluetooth with FN + F5 menu.
    Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
    Ran the updated Bluetooth driver install.
    Rebooted for good measure.
    Double-clicked the Bluetooth Tray icon.
    Clicked Add A Device.
    Turned off my 903+ and continued to hold down the power to enable pairing mode.
    Showed up in devices and added it.
    Worked for audio. There are probably additional options for enabling the mic.
    Hope that helps whoever might find this thread.

  • Iphone4 blue tooth problems

    I can't seem to paire my iphone4 to my keyboard. The blue tooth under devices just says searching.... I can't link the two.

    Just to make sure you're pairing correctly, please note the following from the iPhone User Manual:

  • Blue Tooth Mighty Mouse compatability?

    I've been needing a wireless mouse for a while, preferably blue tooth, the new mighty mouse and one logitech mouse are the only blue tooth mouses I've ever seen with more than just left and right click and scroll, but the logitech one was discontinued. I really want to get this now, but I need a mouse for gaming in bootcamp and I've heard blue tooth doesn't work or something, it appears to work when I'm in XP but I don't have anything Blue Tooth to test it. second even if blue tooth wasn't a problem it doesn't say under the Mighty Mouse page if it supports windows.
    does anyone know if it could work in XP on a macbook too? (maybe a little soon to ask questions about it)

    Generally speaking Bluetooth is not fully supported under Boot Camp. So in that regard it may not work correctly. I did attached a Logitech MX900 Bluettoh mouse under Boot Camp and everything seemed fine whereas my Apple Wireless keybaord didn't want to work. So really your milage may vary.
    The thing with the new Mighty Mouse is that it may require specific drivers for you to be able to configure the additional buttons. If this is the case then it won't work as Apple will need to provide those drivers.
    If gaming is important I would go for a USB wireless mouse so you are able to fully configure the mouse and install its software under Windows.

  • NI device driver locations for upgrading labview to 64-bit

    There is a section in the NI LabVIEW 2012 SPI (64-bit) download where it prompts you for the location of the NI Device Drivers.  Unfortunately, I cannot get a hold of the original CDs for a while, so I cannot see where they default to.  Does anyone know where these drivers default to?  Alternatively, what should I search for if I want to find these device drivers?
    Attachments:
    device driver problem search.png ‏247 KB

    Hi leejesm,
    You can find device drivers at this link.

  • Bluetooth 4.0 - When Will BLE - Blue Tooth Low Energy Be Supported?

    Hello,
    I recently acquired at W530 - has the BlueTooth radio from Broadcom - I thought 4.0 supported BLE and all of the 'smart' features.
    I am actrually developing a product for BLE and one of the reasons I picked up this laptop was for the 4.0 Radio - can anyone tell me when Broadcom/Lenovo will have the Bluetooth SMART Apps (BlueTooth Low Energy or BLE) enabled for this laptop?
    I actually had to go out and buy the Nano Dongle for me an my co-workers from SMKLINK (CSR Radio) in order not to impede progress on this project - a little embarassing for Lenovo I think.
    If BLE is enabled - please let me know how to configure it.
    If not - and I think the answer is not - when will Lenovo get this enabled - something that the W530 should ship with IMHO.
    THANKS IN ADVANCE!   (I STILL  MY THINKPAD!)
    John Dubbya

    Hello Lenovo,
    Blue Tooth Low Energy Driver.  The Broadcom radio that you shipped supports it.
    You do not have a driver that supports it.
    Why?
    Spoiler (Highlight to read)

Maybe you are looking for