G60 keyboard has some keys which do not work.

Bottom row and qwerty row all have the outside keys not working. the two center keys on each row work fine. Could this be the keyboard or an asic on the MB?

Hi,
While this could be a hardware issue, it's always worth trying the following.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook and see if this will launch the Start-up Menu. If it does, select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"

I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
I am trying to install Acrobat XI Std silently by SCCM.
I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
Is there a way to check the language specified for ym serial number?
Bryndon

Update on a couple of details:
@Sabian,
Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
@Sebastian
I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors.

Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
It does the same thing when using msi with the command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
Here is my setup.ini file
[Startup]
RequireOS=Windows XP
RequireMSI=3.1
RequireIE=7.0.0000.0
Require64BitVC10RT=1
CmdLine=/spb /rs /sl"1036"
[Product]
msi=AcroPro.msi
vcrtMsi=vc_red.msi
vcrtDir=VC10RT_x64
Languages=1033;1036
2052=Chinese Simplified
1028=Chinese Traditional
1029=Czech
1030=Danish
1043=Dutch (Netherlands)
1033=English (United States)
1035=Finnish
1036=French (France)
1031=German (Germany)
1038=Hungarian
1040=Italian (Italy)
1041=Japanese
1042=Korean
1044=Norwegian (Bokmal)
1045=Polish
1046=Portuguese (Brazil)
1049=Russian
1051=Slovak
1060=Slovenian
1034=Spanish (Traditional Sort)
1053=Swedish
1055=Turkish
1058=Ukrainian
1025=English with Arabic support
1037=English with Hebrew support
6156=French (Morocco)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=3
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
Does it means that the serial number provided was invalid for deploying ?
NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that. For now it's only not working at the command line.
Another important point is that the install works great without customization ! If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
So what goes wrong ?

Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
I retried installing the initial package in French on a Windows 7 English and the software installed properly in French.
As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
That gave me the cue I needed to know. I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
I ran again the same command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
And everything works fine.
NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first. Otherwise the installation failed without any error message.
Thanks again to you for your good hint,
Bob

I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it

I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.

**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone.

Some keys still do not work on my Macbook Pro 13"

i have a 13" macbook pro running OS Mavericks
My laptop was on the bed and i found it with dog pee on the right side of the keyboard. i immediately cleaned the top of the keyboard and turned it upside down so liquid would come out. It was clean and the computer was still running so i thought everythings ok. i read 2 magazines and then tried to use my laptop again and noticed the keys were not functioning properly. i pressed several keys to test it and then turned it off. i lifted the laptop and noticed it was still wet underneath. i then felt liquid coming out of the right side. i turned the laptop on its right side so that i could force the liquid to come out. i pressed the power button and it didnt turn on. i attached the charger and noticed the battery was charging but the laptop would still not turn on. i opened the back casing. and saw liquid on top of battery, cd drive and hard drive. i wiped it and dried it with a hair drier. i also dried the keyboard but it would still not turn on.
i waited a few hours and went to the apple store. The service person immediately said the engineers would have to quote me for a new logic board and top case. all he did was stare at the logic board. there was a bit of corrosion but it was like small. i did not go through with the replacements since it would cost me $1330 just replacing and no service fee yet.
i went home and took out the battery, logic board and hard drive. i was able to clean underneath the keyboard which was still a bit sticky with dog pee. i wasn't able to remove the cd drive because the screws were so tight. i the reset the SMC and PRAM. The laptop started. When i was able to see the screen where it had different options like restoring and resetting preferences and something about drives i did not know what to do so i shut it down again. i still could not use the power button so i reset the SMC again. it is the only way to turn on my laptop.The laptop opened. The fan started and the screen showed the login grey screen. I noticed the keyboard was still not working. I could not login to my Admin account because it was password protected. i logged into guest. i went to system preferences and deleted my password for Admin So i could log in to my main account. All the while i was using the on screen keyboard to type which can be opened using keyboard preferences. I realized that my laptop was okay except for the keyboard.
I was able to login to my main account. However i noticed that i could not use my Wi-Fi. It had an error that said -- Wi-Fi: No hardware installed -- i then shut down the laptop once more and disconnected the wires attached to the logic board. i reset SMC again. i logged in my main Admin Account without password and it still showed Wifi hardware not installed. I went to System Preferences and connected the ethernet cable to my laptop. I followed instructions and set up my internet using a dsl connection. i typed my username and password still didnt work i typed my IP address, Subnet mask, Router, DNS server. I got the information from my iphone 4s which was using my current wifi. it still did not work. I kept trying to connect the ethernet restarting the procedures over and over again till suddenly the wifi started working out of the blue.
I then downloaded a remote keyboard app that allows me to use my iphone as a keyboard and trackpad so that i can use my laptop. After one day i can use almost all the letters on my laptops keyboard. however i still cannot use the function keys (except volume down), number keys, delete, enter, arrow keys and most of the punctuation keys do not work. fortunately the option and command keys work i noticed that the left side which i was able to clean from underneath is functioning properly while the right side is not. i also notice that the right side which was peed on has significantly lower back lighting than the left side. im wondering if there is anything else i havent done to fix this issue. pls help and thanks in advance
i will try to open the right side part from underneath to clean it but im apprehensive as i dont want to lose the current progress i have with the laptop.

your mac is not going to get better. liquid damage usually gets worse over time.

Keyboard - Combination Option key+number is not working

I have a actual problem with my czech wireless keyboard. When I use the right Option key in combination with numbers 1-9, nothing happens. Now, I am not able to write @ without the keyboard viewer or changing into US keyboard layout. What is surprising is that other combinations with Option key work as usual. Can anybody help. Can that be caused by some SW update?

Hi mirahozda,
Welcome to the Apple Support Communities!
In this situation where some of your keys are not responding as expected, I would recommend reading over and working through the Some keys don’t work as expected section of the attached article.
One or more keys on the keyboard do not respond - Apple Support
Have a great day,
Joe

Some keys of e70 not working

Hi guys,
i have the problem that the keys "7, U, J" and "M" on my keypad are not working. Just nothing happens when I press them. I already removed the rubber-keypad once and pushed the real buttons beneath it. This didn't help. I also tried a hard reset, which wouldn't work ether. Any suggestions?
Firmware: 2.0618.07.10
Model: E70-1
Max
Solved!
Go to Solution.

Only the NCP will be able to tell you how much the repairs will cost. Take the phone in and ask them to let you know how much it will cost before proceeding.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Some key commands are not working

I have a 2010 MacBook Pro running OS 10.10.2.
When I use cmd/shift/4, nothing happens. However, these keys work individually. Similarly, in Pages, hitting cmd/shift/> will zoom the content in the window, but cmd/shift/< will not zoom back out. I've check my keyboard settings and all of the keys are mapped correctly and set to default settings. None of them seem stuck down.
Does anyone have any ideas of other things I can check to restore these functions? Thanks!

Yes, I've done this already. It looks just like your image.
I rebooted, hoping that would fix it and it did not. Also, this started before I loaded Yosemite and I was hoping loading it might fix the problem if it was something simple like that.
I checked the apps tab also (I have no apps) but the only one on there was the "show help menu" button and the keys listed for it are not replacing any other commands.

Thinkpad keyboard problem - some keys generate multiple keys when pressed

thinkpad keyboard problem - some keys generate multiple keys when pressed
For example, "t" generates "tr", "y" generates "yu", "backspace" generates "backspace" plus "IBM access connections", "m" generates "mn" and "n" generates "mn". Not all keys are wrong.
For what it's worth, the odd behaviour started shortly after a trip to Miami in which I had a meeting at a cafe in which we were undercover but it was pouring cats and dogs - it was like having a meeting in a sauna - so I am wondering if the high humidity could have caused the behaviour.
I tried replacing the keyboard but the new keyboard has the same problem.
The machine in question is a Thinkpad T23 running Windows XP Pro
Any help would be appreciated as I am now in Los Angeles using a borrowed Mac! :-)

i have something along the lines of the same problem.
http://bbs.archlinux.org/viewtopic.php?id=56777
my conclusion is something in the last system update screwed it up.

Some key figures are not being correctly reversed in the Change Log

Hi Experts,
I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
First time the record comes - Change log content:
Material   Valid Dt   Cost Value      Quantity Rec. Mode      Req. ID
1234     May/01   $ 100.00       10          'N'     1
Second time when the record changes the Date:
Material     Date      Cost Value      Quantity Rec. Mode      Req. 1234     May/29   $ 100.00       10          ' '     2
1234     May/01   $ -100.00       10          'X'     2
Then the final result in the cube, after it is compressed, is:
Material     Date      Cost Value      Quantity
1234     May/29   $ 100.00       20
Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
Can anybody help me to figure this out, please?
Thanks in advance.

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations. What I can do?

In my numeric key pad I can not use the decimal dot (.) because it has a (,) and this not work with decimal calculations. What I can do? Help ………

IT NOT WORK IN MEXICO. THANKS A LOT. BEST REGARDS. MANUEL LOPEZ
El 6/2/2015, a las 16:50, Apple Support Communities Updates <[email protected]> escribió:
You received a reply
SGIII has replied to your question. You can view the full discussion in Apple Support Communities.
In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations. What I can do?
Correct Answer Helpful Answer
Use the buttons above to tell SGIII and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to SGIII, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

Creating extensions Firefox 3.6.13: When dragging an XPI file (even pre-made), i'm always getting some error, which is not properly readable, but it says "not found" and an "ok" button.

Hi! I want to develop an extension for Firefox.
My problem is that none of the tutorials and sample which i find online work for Firefox 3.6.13 (on Mac).
When dragging an XPI file (even pre-made), i'm always getting some error, which is not properly readable, but it says "not found" and an "ok" button.
Please send me some info on how to make a "helloworld" extension installable in Firefox 3.6.13.
My email is [email protected] Thank you very much!

You can try to install the extension via File > Open File
A forum better suited for such questions is this forum:
*http://forums.mozillazine.org/viewforum.php?f=19 - mozillaZine Extension Development forum
You need to register on the MozillaZine forum site in order to post at that forum.

I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

A reset has nothing to do with Internet access or data access.
A reset is simply pressing and holding the home and power buttons until the white Apple logo appears.
What are you really trying to do?

Hello, I purchased design premium 4.0 German Windows (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not disable the product key. He loaded it, but onl

Hello, I purchased design premium 4.0 German Windows (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

Moving this discussion to the Downloading, Installing, Setting Up forum.
Jakobh53157856 before you begin the installation process please complete the transfer of license process to transfer the Adobe Creative software license you wish to utilize to your possession, You can find details regarding the transfer process at Transfer an Adobe product license.

I have a MacBook with no more guarantee and with Mac OSX 10.5.8. There some sites which do not accept this version . I tried to update with no success. What do I have to do?

I have a MacBook with no more guarantee and with Mac OSX 10.5.8. There some sites which do not accept this version . I tried to update with no success. What do I have to do?

Hi, which sites Andrea?
You might update...
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have it:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
And it's been reported that if you have a MobileMe account Apple will send one free.

G60 keyboard has some keys which do not work.

Similar Messages

Maybe you are looking for