G60 laptop left without sound and bad screen issues after upgrading to Windows 8

I have a G60-458dx notebook that I just recently upgraded to windows 8.
Since then I have had no audio whatsoever, and anytime I try to wake the computer from sleep or hibernation, the screen won't turn on. To get the screen back I have to do a forced shut-down, then turn it back on.
I've tried uninstalling/reinstalling all of the relevant drivers (e.g. video, audio, chipset) to no avail. If anyone has any info on available generic drivers that would work, or updates from hp, you would make me a very happy man.
Here are the hardware id's for my audio and video.
HDAUDIO\FUNC_01&VEN_14F1&DEV_5051
PCI\VEN_8086&DEV_2A42

Try uninstalling the audio driver and installing this generic IDT audio driver: http://goo.gl/0IMBd
If that does not resolve your audio issue, then more than likely it is a hardware compatibility issue.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

Sleep and Shutdown issues after upgrading to Windows 10

Hi there,So I'm having issues with sleep and shutdown after I upgraded to Windows 10, the laptop won't go to sleep or shutdown properly. The screen turns off, but the power LED stays on and the fan as well. If I chose sleep it won't wake up no matter what I try, and I'd have to perform a hard shutdown everytime.Any solution for this problem?Thanks.

**I have posted this in another area with the same issue** YES!!!!! A Solution that worked. Spread the news. It has to do with the Intel Virtualization Tehnology. Didn't know what that was until this issue came up in Windows 10. First, find out if this is your issue. 1. I installed the 'Intel Processor Identification Utility' directly from Intel.2. After installation, open the program and go to the 'CPU Technologies' tab.3. If it says 'YES' for Intel Virtualization Tehnology, proceed. Solution...(at least on my system) 1. The next thing you have to do is go into the BIOS. If you have not done this before, proceed at your own risk. You need to restart the computer and enter the BIOS (for me I hit F10 at the HP screen)2. Within the BIOS, there is an 'Advanced Options' section3. In this section there is a line for 'Intel Virtualization Tehnology' and it will say enabled or disabled. My computer said disabled.4. If this is the case, change the option to 'ENABLED'; then SAVE and EXIT from the BIOS. The Computer will restart and from that point on Shut Down, Sleep, etc. has worked. WOW this was a frustrating issue. Almost went back to Windos 8. I take no credit for this solution, I pieced it together from other posts on this issue. Hope this helps.

Cell Definition and Reverse sign Issue after upgrade

Hi ,
we are having a issue here after upgrade to BI 7 from 3.1c .
There is a Collision between Cell Definition and Reverse sign in the query designer.
Issue is . We have Key Figure "Net Days AR" which has Reverse Sign Checked under properties. In 3.1c when we ran the report the Net Days AR would get value like for example -40 . but now after upgrade to BI 7 SP 16 we are getting value 40. the negative sign is missing. The formula is correct.
I went and checkd if we have any cell definitions defined on this and found the cell definitions onthis keyfigure.
values are comming correct if there are no cell definitions.
Thanks in Advance and Points will be awarded.
Thanks,
Reddy

we have the same problem. In BI 2004s with BEx 3.x when the cell reference is defined, the reverse sign flag is ignored.
I opened a message to SAP. Until now no solution and I think we'll never receive solution. Here are the answers we received:
SAP
I have to say this is the limitation of front end 3.5.
In designer 3.5, it works this way:
When you define a cell referance, this cell is blocked from change of the column property change. No matter how you change the column key fig proerty, it keeps the original status when you define it.
If you want the defined cell property, you need to delete the cell
referance, change property, then redefine the referance.
I agree this is very inconvinience, that's why I would recommend you to use query designer 7.0 if possible. With 7.0 front end, you can define separately the property for defined cells. It is more flexible.
ME
At the moment it is not possible to migrate to 7.0 frontend.
I tried to delete the cell reference, change properties and redefine the reference. I tried to create new columns, define cell properties, save and define the cell reference. I tried several different combinations...
No way, as soon as I define the cell reference, column properties are ignored.
1) How can we restore the correct behavour of a query in frontend 3.5?
2) If we found a way to restore it, we need a smart procedure to modify all our existing queries (including how to identify those affected by this inconvenience).
SAP
For front end 3.5, you need do following:
1. delete cell referance
2. change the column property (such as tick on or off the sign reversal)
3. re-define the cell (this cell will with the new sign status)
4. define formular base on cell
After step 3, you can't change cell property whatever you do in
column property. This is the designed behavior.
If you want to change property after step 3, you need to start
all over from step 1.
ME
I did it.
Don't work. When I define the cell reference, column properties are ignored.
SAP
It seems there is some issue in front end.
Do you use the front end 3.5 with latest patch?
Could you please check front end installation as per sapbexc.xla (described in note 197460). If there are problems shown within this check do the following:
- Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -'REMOVE SAP FRONTEND'
- Install the lastest frontend and GUI patch (according to note 496977or 496989 again and check the installation).
ME
I don't think so. I am using:
Sapgui 7.10 Patch 8
Bex 3.50 Patch 3
Bex 7.x Patch 5
to be continued...

Magic mouse and blue tooth issues after upgrading to 10.6.3

Hi,
After upgrading to 10.6.3 I am having the following problems on my iMac:
1) Magic mouse randomly disconnects during a session
2) bluetooth wakeup no longer works (but is checked in bluetooth advanced settings)
3) After waking up the system using the kb, bluetooth is not active for almost 10 seconds.
4) System seems quite a bit slower
5) Airport is also slower and also takes almost 20 to 30 seconds to become active after wakeup,
None of these issues were present on 10.6.2
Any ideas?
Roy....

Try reapplying the wireless mouse 1.0 update http://support.apple.com/kb/HT3936
http://discussions.apple.com/thread.jspa?threadID=2382651&start=83&tstart=1
http://discussions.apple.com/thread.jspa?threadID=2382651&start=102&tstart=1

Satellite L675D: Blue Screen error after upgrading to Windows 8

Hello,
I've recently upgraded my Toshiba laptop to Windows 8 and every time I use it, after 5-10 minutes, I get a blue screen page of error and the laptop restarts.
The problem is really annoying.
I've discovered that if I don't plug in the battery charger, the laptop works normally, but I'd like to solve the problem properly.
What should I do?

> I've installed Windows 8 Pro with a regular activation key: I had Windows 7 before and I simply updated it to Windows 8. >I don't know about the drivers.. I think that may be the problem, but I also reckon the drivers are ok! Do you know a good way to check it out? Or where I can find the proper drivers?
Windows 8 drivers for Satellite L675D dont exist on Toshiba EU driver page. The L675D series does not support Windows 8.
However, even if the drivers are not available and Windows 8 is not supported, it should not be a big problem to run this system on the Satellite L675D.
You said that you simply updated the Win 7 to Win 8.
Maybe you should try a clean installation of Windows 8?
I think its worth a try in case its an software problem.
By the way: I assume this kind of problem did not appear using Windows 7. Right?

Full screen issue after upgrade to Snow Leopard

Can't seem to play back movie in full screen as before. Picture stays black from start or freezes if played within project (audio ok) View settings are the same - Video Playback>Digital Cinema Desktop Preview - Main.

Hi eaustria,
Double check DNS is correctly configured in Server Admin (SA). Also where in Workgroup Manager (WGM) are you trying to create wikis? In 10.5 (Leopard) server wikis were enabled in WGM. In 10.6 (Snow Leopard) server you enable wikis in the web service in SA or under wiki's in Server Preferences.
Let us know how you get on.
Regards,
John

Has no sound and the screen is dim

Can anyone help? It was working fine and then the sound was kind of scratchy and now it has NO sound and the screen isn't as bright as it was before
Thanks....

Try the standard fixes:
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

My macbook pro It has remained without sound and the connector has a red light

my macbook pro It has remained without sound and the connector has a red light. The analogic sound doesn't work. Thanks for your attention...

    Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
Best.

No sound after upgrading to Windows 8 HP G60-553NR Notebook

I recently upgraded to Windows 8 from Windows 7 64-bit on my HP G60-553NR and went through 3 tiers of tech support with Windows because after upgrading to Windows 8 Pro.... I had no sound coming from my speakers from my notebook nor will sound play when headphones are plugged in. Windows Tech support said that there are no compatable sound drivers to download, which leaves me with no sound completely which is no bueno. So, is there a driver that I can download that will work on my notebook?! If not, how do I downgrade to Windows 7. I'm a DJ and I really need some sound like asap. Thanks in advance for your assistance. Thanks

Do an HP system recovery to get back.
If you have discs - put first in and boot.
If not, you can go into settings from CHarms and advanced to select recover. Here's more: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03489643
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

My MacBook will not play videos. No sound and the video stops after a few seconds.

My Mac book pro will not play videos. No sound and the video stops after a few seconds.

Hello GrahamBIOM,
I understand while viewing a video or listening to some different content, you lose audio, is that correct? I will do all I can to assist you with this issue.
Does the issue occur when you have headphones inserted? If you are not sure, if you have a set of headphones available could you test that please?
Please respond back at your earliest convenience with results.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked?

My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, I call apple support and they told me to bring it in but the nearest store is about two hours away. They said I need it to erase my hard drive but I have too many family pics on it.
would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked on it? I could replace the internal and get an enclosure for the original until I get the pics out of it?
Please advise, it's like five years of family pics I don't wanna loose them and I am worried.
Thanks
Al Florez

A Brody,
I really apprecate your very quick respond, Its too late to back up as of now, my hard drive wont load at all so I cannot follow your instruction to back it up. Learn a hard lesson but I will from now on following your link.
Also my hard drive it is not available to do the free exchange program.
I read the OWC instruction on how to replace the drive I was just wondering if the 2TB would work on it instead of the 1 TB they offer, I specifically asked for the Seage Barracuda because I had great experiences with it on PCs.
Again, Thank you

My iPhone 4S has no sound on alerts, music, only on calls and SMS, this happened after upgrading to IOS7. Can anyone help me solve this problem?

My iPhone 4S has no sound on alerts, music, only on calls and SMS, this happened after upgrading to IOS7. Can anyone help me solve this problem?

check and make sure that an alert style has been choosen for certain alerts, and make sure you check your sounds in settings

Black Screen After Upgrading to Windows 8

Hi
I'm experiencing a black screen after upgrading a Dell N5050 B890 to Windows 8.
Tried to refresh the installation but the problem persited. re-installed the Windows 8, the machine logged in successfully but the problem arose again after reboot.
Urgent assistance needed

This problem is solved...
I guess the problem is concerned with the display module controller in the BIOS which is having a slight compatibility issue with windows 8.
This issue is solved by updating the BIOS of your Laptop/PC to the latest version. You can download the latest BIOS from the website of the Laptop company/Motherboard Company.
But for updating the BIOS, you have to start your computer/Laptop for at least one time in Normal Mode. So here are the steps to do so...
1) Boot the Laptop/PC.
2) After the boot screen (The Circle Animation & Windows 8 logo), you will be presented by the lovely & awesome blank screen.
3) Wait for 1 minute so that drivers load into the memory.
4) Press the Power button of your laptop/PC for only a moment (Just Press and release it quickly. Don't hold. We don't want to shut down).
5) This will force the laptop/PC to go into Sleep mode.
6) When the laptop/PC goes in sleep, the laptop fan & other sounds will stop.
7) After 4-5 seconds, press the power button again & release it quickly.
8) Voilllaa!!! The laptop/PC starts & you are presented with the lock screen. Now..... Login! What are you waiting for! :P
This is not the permanent solution. It just lets you start you Laptop/PC.
After updating the BIOS, I strongly suggest that you must download the latest graphics driver for your Computer/Laptop to avoid any further issues.

After upgrading to Windows 8.1 firefox longer works. I got it to load but screen is either blank or doesn't go to target address

after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
Although IE11 works, it doesn't work correctly.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Screen distortion after upgrading to mavericks os

I own a late 2011 MBP 13". Last week I upgraded to Mavericks and regret it ever since. Firstly, it's become unbelievably slow. Secondly, and most importantly my screen resolution is now distorted and completely messed up. Immediately I suspected if Mavericks had screwed some setting. So I looked up Google for screen distortion after upgrading to Mavericks. The results were surprising! There are many apple discussions going on about the same thing. After reading most of them, as suggested in almost all threads, I took my laptop to the service station. The initial response given to me was that they suspected a hardware issue. All threads had indicated what to expect so I was not surprised. I explained to them clearly that there are discussions revolving around this topic and many users have been affected because of this. I even showed / shared the links of the various discussions on this topic. The service station in India asked for more time to investigate further. In the mean time I contacted the Indian call centre to report this problem. The service station reverted after their investigation that my logic board was corrupted and needed replacement. Phew!!! The cost of replacement is as good as buying a new MBP. It's really amusing because my MBP is less that 2 years old and unfortunately I do not have extended warranty.
Has anyone facing the same issue been able to convince apple that this is a mavericks issue? Does even apple recognize this as an issue in the first place? Does apple expect people to blindly invest in hardware just because they have released a new OS?
These and many more questions....
Expecting answers!!!
Not a good start to 2014

The startup disk may need repairing ...
Restart your Mac while holding down the Command + R keys.
From there you should be able to access the built in utilities in OS X Recovery

G60 laptop left without sound and bad screen issues after upgrading to Windows 8

Similar Messages

Maybe you are looking for