G62 110SS light blinking codes ?

Same issue on my g62 - 149WM.  With all devices removed as well, i.e kbd, hd,ood,fan,memory,WLAN.

Hi RonaldC,
Welcome to the HP Support Forums!
I gather that you are getting a blinking code when you start your notebook. I am happy to help you with this, however it looks like this post may have been moved from another thread so I am not sure of the full context of it.
You mention having all these devices removed; several of those devices are needed for startup and would cause the error code by their absence, like the memory.
So what was the original issue that presumably caused you to disconnect all the devices?
What version is your OS?  Is the Windows Version on My Computer 32-bit or 64-bit?
As a start, here is a link to the support page for your notebook and a document of the notebook startup error codes.
HP G62-149WM Notebook PC Drivers
Blank Screen LED Error Codes
Depending on the number of flashes you are getting the document will point to the cause.
Let me know the results and we can proceed from there.
Regards,
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Similar Messages

  • What do the power light blinking codes mean on cinema display?

    I have a cinema display on my G4, and about a year ago or so I had to replace a backlight due to a failure. Tonight I see that the power light is blinking again in a repeatable sequence, and I am wondering where I learn what the sequence is telling me about the nature of the problem?
    Power output of the display is reduced again, and I am hoping I do not need yet another backlight repair.

    The meaning of the blink codes is not stated in the manual, but in this knowledge base article:
    http://docs.info.apple.com/article.html?artnum=88366

  • G62 charger; light blinks, not working

    Whenever I plug in and try to use the charger for my G62, the indicator light flashes white then orange, and then stops working.

    Hello Jori119,
    I see that you are having problems with your charger for your HP computer. From what you are describing I would think that the charger is causing the issue.
    I would suggest trying another charger to verify that. If you take the computer to a local computer retailer they may have a charger that you can test on the computer.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP laptop G62 Blue led light blinking on the caps lock button

    When booting up get a black screen. The Caps Lock blue led light is blinking once.
     1: Tried a hard reset Removed battery, held down the power button for 15 seconds and tried again no luck.
     2: Air cleaned the power vents around the fan same again no boot.
     3:  Founf the LED code chart for the blinks mine appears to blink once and a pause then blink again
          the blink code chart say  CPU Not Functional.
     Does this mean the systemboard / motherboard is bad / fried
    Thanks
    Emmersond

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like your Notebook has a blinking/flashing CAPSLOCK light and a blank screen all the time
    Whenever the Capslock LED Blinks once that means CPU not functional and we need to replace the Processor
    However, I would request with you to perform the below shown step before contacting HP
    Step 01. Turn OFF the Notebook
    Step 02. Un-plug the Power/AC Adapter and also remove the battery too
    Step 03. Press and Hold the Power Button on the Notebook for a full minute
    Step 04. Test your Notebook with Battery and Power Adapter alone
    Note: If you are still facing the same issue try to remove and reseat the Memory Modules of your Notebook
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Blackberry Curve 9220 Won't Switch stuck On only red light blinking RED LIGHT! HELP!

    my blackberry is stuck on red light blinking oleas help me no problem if all the data is lost i dont care i want my phone back it hase been 3 -4 weeks . light is blinking until the battery goes down and it wont charge also i have to get the battery charged by other phone plzz help mee........ 

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Pearl 8100-Rogers not turning on-Red light blinking

    Hello
    I have new Blackberry Perl 8100.I got this from Rogers.It was sitting in box for few month.I tried turning on but it is not turning on.I left the phone in charge for more then 2 hour and it is still not turning on.
    I tried taking out battery but and replacing back in but stillit is not turning on.I can only see red light blinking.nothing else.pls help me .thank you.

    Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
    If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
    Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
    Download Desktop Manager from here:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Torch 9800 wont turn on and the red light blinking..

    hi..im new at here..ive got problem with my bb torch 9800..last day after charging my phone..it cant turn on and the red light blinking..ive tried connect my phone to computer but it cant recognize my devise..ive tried many way to solve it like using BBSAK but it still cant connect to my devise..id tried using blackberry devise manager software but the problem still exist..really2 need ur help now..
    *ive update my phone OS to the latest one..didnt know if that is the problem..need ASAP..

    Hi and Welcome to the Community!
    I am very confused by your post. You say you can't connect your device...to your computer? If so, how did you manage to upgrade the BB OS? Given that, from what you've described, you can use BBSAK, that would require connecting to your computer, but then you say you can't. So I'm confused.
    Please try posting again, and be 100% clear about exactly what the symptom is that you wish to resolve, exactly all of the steps you have attempted (e.g., "like using BBSAK" isn't enough...what, exactly, did you do with BBASK?), and exactly the results of each step of what you have attempted.
    Thanks and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Powe Mac G5 early 2004 gives error (no memory installed) Do I need to replace the Logic Board. Machine powers up,2beeps and power lights blinks 2 times and stops there, No video or any thing?

    I just recently aquired a Power Mac G5 early 2004.
    When I power the system up. I get 2 beeps
    and the small front panel light blinks 2 times continuously.
    The error codes show that it means a memory problem or
    no memory present. Memory is installed.
    In this case do I need to replace the mother board.
    The system goes no futher, no video or any thing.

    Well, it's possible that someone pulled the original RAM from the computer before they sold it, and repalced it with incompatible RAM. That, believe it of not, would be the best of all world in this case, as a working G5 logic board and its installation could cost as much as a refurbed Intel mac.
    I would contact the seller if you did not personally see the computer working before you bought it.
    As the computer had to be moved about--possibly shipped--to change hands, first check that all internal cards and RAM Modules are fully seated. They can work loose in some models.

  • Red light blinks and phone dosen't get on

    firstly my os crashed and faded away and the display turns black.then i reinstalled the o.s 10.3 and now red light blinks and the phone dosen't get on!!

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs. If it fails, please try again but increase the wait time in step 4 to 2 hours, and perhaps as long as 4-5 hours.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    If it still continues to fail, then a forceful OS reload (via AutoLoader) would be my next recommended step.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HPG72-250US Power Light Blinks, Caps Lock Light Stays On

    So I have been having some problems with my computer, an HP G72-250US, that I bought a few years ago.  Namely, the screen would get black and white lines on it and freeze: Here's a pic.   What the screen looks like. 
    A friend of mine told me that it could be a problem with the fan, so I decided I would try to take it apart.  After some success, I noticed the fan wasn't clogged or anything, so I put it back together.  When I did, the power button only turns on for a half a second, then shuts off.  It repeats this over and over again.  I noticed that the Caps Lock light stays on.  Doesn't blink, doesn't do anything. 
    I looked around online (using my wifes computer) and all I could find was the HP LED error codes, which mention the Caps Lock or Number Lock light blinking, but nothing about the Power Button Light.  Could it be the same issue, a CPU failure? 
    Thanks for any help!
    UPDATE: 
    So after watching my computer for a bit, the Caps Lock Light DOES do something.  I hope I can say this correctly so everyone can understand it:
    The Caps Lock Light is on, the Power Button Light is off.  For the split second or two that the Power Button Light comes on, the Caps Lock Light goes out.  The LAN connector also lights up when the Power Button Light is on.  Everything is pointing to it blinking once, so I'm still thinking its a CPU problem.  Any thoughts?

    EduarddeKam wrote:
    It is not a real problem in the sense that is does not hinder me in my computer use, but it is something strange.
    When a turn the computer off, the caps lock light on my keyboard turns on, only to turn off after I strat my computer.
    You might consider zapping your PRAM.

  • Led lights blinking DV7 and DV4

    Alrighty   i got two machines  one running vista  one runing windows  7    the one running vista is a DV7 and the DV 4 runs 7    
    both computers do not boot at all   the fan turns on the backlight on the display turns on and the memory units are all fine.  the lights on the keyboard ( scroll and caps ) are blinking continuously, 3 sec between each blink   ive tryed everything. need help fast  these computers are inportant need them running again!!!   please help!

    Hello karwath29r.  I understand that you're unable to get either of your notebooks to boot.
    The flashing CAPS LOCK keys indicate an error.  It will be very helpful to be able to determine which blink code you are getting.  Take a look at this document and determine which blink pattern you're getting.
    Let me know the result.  Have an excellent weekend!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Charging light blinks 3 times (NOT MEMORY)

    Ok.  I have 2 virtually identical machines.  One is a Compaq CQ57-229WM and an HP 2000-2B19WM.  They share a lot of components like batteries, chargers, memory, etc... Problem is the 2000 is was Windows 8.0  It was hard enough for my 69 year old mother to grasp Win7 and IMPOSSIBLE for her to understand Win8 without touch screen interface, so I downgraded it to Win7 and it worked fine...for a while.  It kept getting slower and slower and finally got to the point of being useless.  I ordered a set of restore DVD's and was going to restore it to Win8, give mom mine and use the 2000 myself.  I read the instructions, booted the way the flyer said to and it began to repair the system.  About 20 seconds into it, it froze and would not respond and finally shut off.  It was plugged in but I thought the battery may have died and grabbed my Compaq battery (same part # by the way), put it in and nothing.  I didn't think anything of it since I had been using my Compaq and it had been left unplugged for a few days and thought the battery on it was dead also.  I swapped batteries back, plugged in the Compaq and the A/C charge light didn't come on.  I pressed the power button and the A/C light flashed 3 times and went off.  I put the battery back into the HP and pressed the power button and the button itself barely blinks (more of a quick 'glow' than a flicker) and the A/C light blinked 3 times.  I swapped memory out on the Compaq with some new memory (since the 3 flash code if for bad memory module) and nothing... still 3 flashes.
    Anyone want to try a stab at this one?  I am thinking the battery lost its 'condition memory', but which do I put a new battery in since they are both doing the same thing now?  AND if that is the case, how do I recover the HP and restore Win8 on it if all it is going to do is short out batteries?
    This question was solved.
    View Solution.

    Basically what I am saying is that I now have 2 machines doing the exact same thing at the exact same time.  One was being restored to Windows 8 and died and the other just donated a battery for about 1 minute and now it will not work either.  There was nothing wrong with the Compaq (battery donor) before the battery swap.

  • Phone turns off and led light blinks wont turn back on

    I have the 8100 and have had it for about 2 weeks I bought it off line since my old phone broke. This morning I took it off my charger and went to a meeting after the meeting I looked at my phone and the led light was blinking I hit a button and nothing happened. I then tried to turn the phone back on but nothing happened. I removed the battery waited 5 minutes then put it back in and it started to work again. But again the same thing happened. I tried this multiple times but nothing change it still went back after a few minutes. I took the battery out sim card and memory card out for an hour then put them back in and the same thing happened. Has anyone had this happen before and is there anything I can do for it. Again after I turn my phone on it "shuts off" the led light blinks like I have a message but I ca not do anything the only way to get it out of this is to remove the battery and put it back in but it reverts back to this in a few minutes. Any help would be greatly appreciated thanks

    Greetings, and welcome to the BlackBerry.com Support Forums.
    Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
    If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
    Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
    Download Desktop Manager from here:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    Report back?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Laptop won't boot caps light and Num light blink

    My Ts2-1375dx won't boot after I have shut it off and turned it back on. I get the cap & num lock lights blinking once. I remove the powercord, battery and all attached peripherals, hold the on button for 30 seconds reconnect the power and try booting again. Although this works (maybe after 1-3 tries) I don't believe that this is the way you should have to boot the computer. I also see lots of the same problem with the solution being the method I use. WHY IS THERE NO PERMANT FIX?!?!
    This question was solved.
    View Solution.

    Please try understanding the root cause for the issue by understanding the LED blink codes from the following weblink:
    HP Notebook PCs - Computer Does Not Start and the LEDs Blink or the Computer Beeps
    Provides procedures for resolving problems identified with blink codes or beep codes during startup
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • My mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.

Maybe you are looking for