G62 mobility radeon 5470 not working

Hi, i have been using HP G62-b45SE notebook with ATI mobility Radeon 5470 and an intel integrated video processor.Few months ago problems started to appear when notebook switched to Radeon when plugged in ac.Couple of times i got blue scrren but i didnot read the dump.I upgraded the bios from the hp site for my notebook and reinstalled the ATI driver.Now when I boot my notebook it shows black screen and nothing else everything else comes on keyboard works and I can hear the login music also.This problem is constan now.Several times I did manage to boot with ATI radeon active since its hybrid
switches from one gpu to other.Now the problem is constant.When I uninstalled the ATI driver in windows 7 safe mode it booted successfully.I even reinstalled my win7 but no success either.I suspect its a hardware problem that requires mother board to be changed. But Iam not sure.
Any help in this regard will be appreciated.

Hi:
According to the support and driver page for your model, this is the only graphics driver that should work.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93513-1&cc=us&dlc=en&lc=en&...
This driver installs the drivers for both the Intel and AMD graphics devices.
You cannot install any other driver (such as a separate Intel or separate AMD driver).
if the above driver doesn't work, unfortunately, I wouldn't know why.

Similar Messages

  • Sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

    sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

    What troubleshooting steps have you tried?  Have you tried resetting the iPhone? or restoring it?

  • The apple mobile device is not working on the ipad. how can i fix it?

    My apple mobile device is not working on my ipad and my itunes dosn't work now. How can I fix it?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

    Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

    I had the same problem. It fixed itself when I opened Internet Explorer (I don't normally use it). I was opening Support Portal to get some support help, but I'm not sure if it was the page or simply opening IE that did the trick.

  • Mobile TV app not working

    hi I'm on Vodafone - I have a sky sports my bike TV subscription but the app is not working.
    Can someone please check my sky id and why mobile TV is not working? I phone 6+

    Sky only moderate on these forums and post Service updates.
    You can Contact Sky for further assistance or wait and see if another customer has any advice.
    Quote from the main forum page: "welcome to the Sky Community - a place where Sky customers share experiences, knowledge and help one another. "
    If you have a smartphone/tablet why not try the Sky Service App

  • MacPro 1,1 (Lion)  + Bootcamp  + Windows XP +  ATI Radeon 1900XT = not working

    Hi as written in the title my ATI Radeon 1900 not working after Lion update on WinXP.
    has someone any advice ...... if its not working i have to switch complete the Macpro

    a list of all hardware conflicts:
    Ressource          Gerät
    E/A-Port 0x00000000-0x00000CF7          PCI-Bus
    E/A-Port 0x00000000-0x00000CF7          DMA-Controller
    IRQ 20          Intel(R) 631xESB/6321ESB/3100 Chipset USB Universal Host Controller - 2689
    IRQ 20          Intel(R) 631xESB/6321ESB Ultra ATA Storage Controller - 269E
    E/A-Port 0x000003C0-0x000003DF          Intel(R) 5000 Series Chipset PCI Express x8 Port 4-5 - 25F8
    E/A-Port 0x000003C0-0x000003DF          Intel(R) 5000 Series Chipset PCI Express x8 Port 6-7 - 25F9
    E/A-Port 0x00000070-0x00000077          System CMOS/Echtzeituhr
    E/A-Port 0x00000070-0x00000077          Hauptplatinenressourcen
    IRQ 21          Intel(R) 631xESB/6321ESB/3100 Chipset USB Universal Host Controller - 268A
    IRQ 21          Intel(R) 631xESB/6321ESB/3100 Chipset Serial ATA Storage Controller - 2680
    Speicheradresse 0xC0A00000-0xC0AFFFFF          Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 4 - 2696
    Speicheradresse 0xC0A00000-0xC0AFFFFF          Broadcom 802.11n-Netzwerkadapter
    E/A-Port 0x00003000-0x00003FFF          Intel(R) 5000 Series Chipset PCI Express x8 Port 2-3 - 25F7
    E/A-Port 0x00003000-0x00003FFF          Intel(R) 6311ESB/6321ESB PCI Express Upstream Port - 3500
    E/A-Port 0x00003000-0x00003FFF          Intel(R) 6311ESB/6321ESB PCI Express Downstream Port E3 - 3518
    E/A-Port 0x00003000-0x00003FFF          Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2
    Speicheradresse 0xFEC00000-0xFECFFFFF          Hauptplatinenressourcen
    Speicheradresse 0xFEC00000-0xFECFFFFF          Erweiterter programmierbarer Interruptcontroller
    IRQ 16          Intel(R) 5000X Chipset Memory Controller Hub - 25C0
    IRQ 16          Intel(R) 5000 Series Chipset PCI Express x8 Port 2-3 - 25F7
    IRQ 16          Intel(R) 6311ESB/6321ESB PCI Express Upstream Port - 3500
    IRQ 16          Intel(R) 6311ESB/6321ESB PCI Express Downstream Port E1 - 3510
    IRQ 16          Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 2 - 2692
    IRQ 16          Texas Instruments OHCI-konformer IEEE 1394-Hostcontroller
    IRQ 17          Intel(R) 6311ESB/6321ESB PCI Express Downstream Port E2 - 3514
    IRQ 17          Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 1 - 2690
    IRQ 18          Intel(R) 6311ESB/6321ESB PCI Express Downstream Port E3 - 3518
    IRQ 18          Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
    IRQ 18          Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 3 - 2694
    Speicheradresse 0xC0C00000-0xC0CFFFFF          Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 4 - 2696
    Speicheradresse 0xC0C00000-0xC0CFFFFF          Broadcom 802.11n-Netzwerkadapter
    IRQ 19          Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2
    IRQ 19          Intel(R) 631xESB/6321ESB/3100 Chipset PCI Express Root Port 4 - 2696
    IRQ 19          Broadcom 802.11n-Netzwerkadapter
    IRQ 19          Intel(R) 631xESB/6321ESB/3100 Chipset USB Universal Host Controller - 2688
    IRQ 19          Intel(R) 631xESB/6321ESB/3100 Chipset USB2 Enhanced Host Controller - 268C
    Speicheradresse 0xC0000000-0xC09FFFFF          Intel(R) 5000 Series Chipset PCI Express x8 Port 2-3 - 25F7
    Speicheradresse 0xC0000000-0xC09FFFFF          Intel(R) 6311ESB/6321ESB PCI Express Upstream Port - 3500
    Speicheradresse 0xC0000000-0xC09FFFFF          Intel(R) 6311ESB/6321ESB PCI Express Downstream Port E3 - 3518
    Speicheradresse 0xC0000000-0xC09FFFFF          Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2
    Speicheradresse 0xA0000-0xBFFFF          PCI-Bus
    Speicheradresse 0xA0000-0xBFFFF          Intel(R) 5000 Series Chipset PCI Express x8 Port 4-5 - 25F8
    Speicheradresse 0xA0000-0xBFFFF          Intel(R) 5000 Series Chipset PCI Express x8 Port 6-7 - 25F9
    E/A-Port 0x000003B0-0x000003BB          Intel(R) 5000 Series Chipset PCI Express x8 Port 4-5 - 25F8
    E/A-Port 0x000003B0-0x000003BB          Intel(R) 5000 Series Chipset PCI Express x8 Port 6-7 - 25F9

  • Lync 2013 Mobility continues to not work

    Having issues getting mobility to work.
    Simple environment:
    Single server Edge pool
    Single server EE pool
    SQL clustered backend
    All Lync 2013 CU1 at this point in time.
    Potentially required reading:
    Deploying Mobility (Technet)
    Lync Mobility Deep dive
    (based on 2010, but nearly the same in 2013)
    http://masteringlync.com/2011/08/13/using-fiddler-to-troubleshoot-address-book-download-issues/
    http://blogs.technet.com/b/nexthop/archive/2012/11/09/understanding-lync-server-autodiscover-to-support-the-lync-windows-store-app.aspx
    Windows RT app uses the same method as IOS, and is more wiresharkable/tracable, so I am using that.
    Client end errors:
    Windows RT app (15.0.4481.1503) -  this client version cannot log in.
    iOS - Can't sign in.  Please check your account information and try again.
    I don't have a windows phone or android, so working with the clients I have.  (I understand these also do not work)
    Fiddler trace of Windows RT app session:
     From the W3svc logs:
    2013-03-20 03:53:17 1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user [email protected] 4443 - 75.122.79.199
    LyncImm/15.0.4481.1503+(Microsoft+Lync) 401 0 0 35
    LyncImm is
    NOT a user agent listed in the CSCP - google "user agent" +lyncIMM turned up nothing.  Dead lead?
    Lync connectivity analyzer shows it repeats the same webticket 401 over and over with:
    Cookie  found in autodiscover response: StatusCode: 401, ReasonPhrase: 'Unauthorized', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
      X-Ms-diagnostics: 28032;source="LyncFE.company.local";reason="The web ticket is invalid.";faultcode="wsse:InvalidSecurityToken"
      X-MS-WebTicketURL:
    https://lyncweb.company.com/WebTicket/WebTicketService.svc
      X-MS-WebTicketSupported: cwt,saml
      X-MS-Server-Fqdn: LyncFE.company.local
      X-Content-Type-Options: nosniff
      Cache-Control: no-cache
      Date: Wed, 20 Mar 2013 04:12:20 GMT
      Server: Microsoft-IIS/7.5
      X-Powered-By: ASP.NET
      Content-Length: 1293
      Content-Type: text/html
    LCA:  from inside, choosing Windows App - success!
    LCA: from inside, choosing Lync Mobile Apps- fail:
    Failed to obtain the WS-Metadata Exchange (MEX) document using GET for
    https://lyncweb.company.com/Mcx/McxService.svc/mex.
    The service did not require authorization.
    LCA, from outside, choosing Windows App - hangs repeatedly on the HTTPS external channel.  (repeating 401's on webticket service)
    LCA, from outside, choosing Choosing Lync Mobile apps  - failed, same as from inside #2
    Here's what the LCA failure looked like:
    2013-03-20 04:59:12
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 134
    2013-03-20 04:59:12
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 155
    2013-03-20 04:59:12
    1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
    [email protected] 4443 - 75.122.79.199 -
    401 0 0 35
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 126
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 158
    2013-03-20 04:59:13
    1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
    [email protected] 4443 - 75.122.79.199 -
    401 0 0 31
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 126
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 148
    2013-03-20 04:59:13
    1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
    [email protected] 4443 - 75.122.79.199 -
    401 0 0 33
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 121
    2013-03-20 04:59:13
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 155
    2013-03-20 04:59:13
    1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
    [email protected] 4443 - 75.122.79.199 -
    401 0 0 31
    2013-03-20 04:59:15
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 125
    2013-03-20 04:59:15
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 147
    2013-03-20 04:59:15
    1.2.3.4 GET /Autodiscover/AutodiscoverService.svc/root/user
    [email protected] 4443 - 75.122.79.199 -
    401 0 0 32
    2013-03-20 04:59:15
    1.2.3.4 POST /WebTicket/WebTicketService.svc/mex - 4443 - 75.122.79.199 - 200 0
    0 120
    2013-03-20 04:59:15
    1.2.3.4 POST /WebTicket/WebTicketService.svc/Auth - 4443 - 75.122.79.199 - 200
    0 0 151
    Similar thread:
    http://social.technet.microsoft.com/Forums/en-US/ocsmobility/thread/96c3fc3a-2f80-435a-8368-1a83dcd56e55/
    http://msdn.microsoft.com/en-us/library/ff595929%28v=office.12%29.aspx
    IOS attempt at sign on (version 4.3.8000.0000)
    IIS log files:
    2013-03-20 04:26:08
    1.2.3.4 GET / sipuri=sip:[email protected] 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 200 0 0 1382013-03-20 04:26:08
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 0 0 802013-03-20 04:26:08
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074254 1292013-03-20 04:26:08
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074252 882013-03-20 04:26:08
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074254 782013-03-20 04:26:08
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074252 882013-03-20 04:26:09
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074254 782013-03-20 04:26:09
    1.2.3.4 POST /webticket/webticketservice.svc - 4443 - 166.137.151.211
    Lync%202010/1.6+CFNetwork/609.1.4+Darwin/13.0.0 401 1 2148074252 84
    IOS log file was too large to post in message.
    Running test-cmdlets:
    $passwd1 = ConvertTo-SecureString "supersecure" -AsPlainText -Force $passwd2 = ConvertTo-SecureString "notontheinternet" -AsPlainText -Force $tuc1 = New-Object Management.Automation.PSCredential("domain\user1",
    $passwd1) $tuc2 = New-Object Management.Automation.PSCredential("domain\user2", $passwd2) Test-CsMcxP2PIM -TargetFqdn lyncfe.company.local -Authentication Negotiate -SenderSipAddress sip:[email protected] -SenderCredential $tuc1 -ReceiverSipAddress
    sip:[email protected] -ReceiverCredential $tuc2 -v
    From <http://technet.microsoft.com/en-us/library/hh690024.aspx>
    Results:
    Target Fqdn   : lyncfe.company.com
    Target Uri    :
    https://lyncfe.company.com:443/mcx
    Result        : Failure
    Latency       : 00:00:00
    Error Message : No response received for Web-Ticket service.
                    Inner Exception:The HTTP request is unauthorized with client
                    authentication scheme 'Ntlm'. The authentication header
                    received from the server was 'Negotiate,NTLM'.
                    Inner Exception:The remote server returned an error: (401)
                    Unauthorized.
    Diagnosis     :
                    Inner Diagnosis:X-MS-Server-Fqdn : lyncfe.company.com
                    Cache-Control : private
                    Content-Type : text/html; charset=utf-8
                    Server : Microsoft-IIS/7.5
                    WWW-Authenticate : Negotiate,NTLM
                    X-Powered-By : ASP.NET
                    X-Content-Type-Options : nosniff
                    Date : Wed, 20 Mar 2013 04:39:44 GMT
                    Content-Length : 6639
    Verbose comments on it:
    Trying to get web ticket.
    Web Service Url :
    https://lyncfe.company.com:443/WebTicket/WebTicketService.svc
    Using NTLM\Kerberos authentication.
    Could not get a web ticket
    CHECK:
     - Web service Url is valid and the web services are functional
     - If using Phone Number\PIN to authenticate, make sure they match the user uri
     - If using NTLM\Kerberos authentication, make sure you provided valid
    credentials
    URLs and ports all look OK, all services started.
    Not using phone/PIN
    I provided valid creds - the virtual directories show anon/NTLM for the Webticket vdir.
    Any help is welcome - really want this issue put to bed!

    I know this is an old thread, but I was struggling with the same error for mobility, and I hope this may help others in the same situation. 
    On my scenario the issue was caused because the customer didn't use any reverse-proxy solution, instead the FE external website was directly published using a FortiGate box.
    Given that scenario, there were 2 different certs installed on the FE server, 1 (internal RootCA) certificate was applied to the internal website, and another one issued by Godaddy was assigned to the external website manually from IIS console.
    ---I know this is far from a supported solution, but I was able to get it working after some investigation---
    To solve the issue I use this article:
    http://technet.microsoft.com/en-us/library/jj205253.aspx it explains how to check and assign the certificates for oAuth and I used these cmdlets to specify the Godaddy cert to the "WebServiceExternal" & "OAuthTokenIssuer" websites.
    After that the mobility access for internal and external users started to work as expected, I've validated it with "Lync Connectivity Analyzer" and with different mobile clients on Android, IOS and Windows Store.
    Hope this information may be useful.
    Performance, Security & Design

  • Mobile hotspot app not working on Droid Charge

    My mobile hotspot app stopped working today. When I click on the app the screen flashes for a second then nothing happens. I get the same result when going to settings, wireless network, mobile hotspot. It's like the link to the app is broken or the app is gone. I have removed the battery and restarted several times with no luck.
    How do I reinstall the app or fix this?

    WOW! I just changed the date to May and Boom hotspot works. Is that a joke? VZWsupport wrote me on twitter saying their top engineers have it listed as an open issue still.... I'm not a programer or developer by any means but you would think that if the hotspot works fine with the date changed wouldn't overriding or rewriting that part of the software be fairly easy for a big company like Verizon????

  • Adobe air mobile - softKeyboardType is not working when using skinClass to allow scrolling?

    I am trying to set the softKeyboardType to email but when ever i use skinClass="spark.skins.mobile.TextAreaSkin" it doesn't change it but when i take off skinClass="spark.skins.mobile.TextAreaSkin" it does work. The problem is i need the skinClass="spark.skins.mobile.TextAreaSkin" class to allow my application so scroll with out it the text does not stay with in the bounds of the text input boxes. Has anyone seen this problem or another fix the the scrolling problem?
    Code examples
    <s:TextInput softKeyboardType="email" id="id1" width="100%" skinClass="spark.skins.mobile.TextInputSkin" />
    <s:TextArea softKeyboardType="email" id="id2" height="400" width="100%" skinClass="spark.skins.mobile.TextAreaSkin" />
    Thank for the help,
    Justin

    The main problem we are all seeing is that its not hooking into the scroller, as this is documented not to work in a scrollable environment
    However try something like this, still not perfect (as i see a flicker) but it should get you going.
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        applicationDPI="320"
        xmlns:local="*"
              applicationComplete="init()">
      <fx:Script>
                        <![CDATA[
                                  import mx.events.PropertyChangeEvent;
                                  import spark.skins.mobile.StageTextInputSkin;
                                  import spark.skins.mobile.TextInputSkin;
                                  protected function init():void {
                                            addHandlers(myScroller, myTI);
                                  protected function setStageTextInputSkin(ti:TextInput):void {
      //FIXME could do with a check to ensure that the skin isn't being set many times when it doesn't need to
                                            var myTIText:String = ti.text;
                                            ti.setStyle("skinClass",Class(StageTextInputSkin));
                                            ti.returnKeyLabel = ReturnKeyLabel.DONE;
                                            ti.autoCapitalize = "sentence";
                                            ti.softKeyboardType = SoftKeyboardType.NUMBER;
                                            ti.text = myTIText;
                                  protected function setTextInputSkin(ti:TextInput):void {
      //FIXME could do with a check to ensure that the skin isn't being set many times when it doesn't need to
                                            ti.setStyle("skinClass",Class(TextInputSkin));
                                  protected function addHandlers(scroller:Scroller, ti:TextInput):void {
      // ====================== ADD LISTENERS FOR WHEN WE NEED THE STAGETEXTINPUT ===========================================
                                            ti.addEventListener(FocusEvent.FOCUS_IN, function(event:FocusEvent=null):void { setStageTextInputSkin(ti) });
      // ====================== ADD LISTENERS FOR WHEN WE NEED THE TEXTINPUT ===========================================
                                            addEventListener(SoftKeyboardEvent.SOFT_KEYBOARD_DEACTIVATE, function(event:SoftKeyboardEvent=null):void { setTextInputSkin(ti) });
                                            ti.addEventListener(FocusEvent.FOCUS_OUT, function(event:FocusEvent=null):void { setTextInputSkin(ti) });
      //http://stackoverflow.com/questions/4390725/flex-4-scroller/4425091#4425091
                                            scroller.viewport.addEventListener(PropertyChangeEvent.PROPERTY_CHANG E, function(e:PropertyChangeEvent):void {
                                                      if (e.source == e.target && e.property == "verticalScrollPosition")
                                                                setTextInputSkin(ti);
                                                      if (e.source == e.target && e.property == "horizontalScrollPosition")
                                                                setTextInputSkin(ti);
                        ]]>
      </fx:Script>
        <s:Scroller width="100%"
            height="100%"
            verticalScrollPolicy="on"
                        id="myScroller">
            <s:Group width="100%"
                height="100%">
      <s:layout>
      <s:VerticalLayout/>
      </s:layout>
                <s:TextInput id="myTI" text="hello"
                    softKeyboardType="number"
                                            skinClass="spark.skins.mobile.TextInputSkin"/>
            </s:Group>
        </s:Scroller>
    </s:Application>

  • ITS Mobile Function Key not working

    Dear Gurus,
    I'm currently working on a ticket concerning SAP screens on hand held devices.
    On the hand held devices we have all the LM screens available + an own developed screen.
    Everything is working fine on the hand held device until the user gets to the custom developed program. In here the F7 key (used on the no touch device) does not work.
    Instead the device starts his zoom functionality but no action on the SAP end.
    I currently have tried everything.
    I even tried catching the pressed key with ~ITSMOBILEDEVICEINCLUDE but this still does not fix the problem.
    Does anybody know what or where I could look for the solution?
    thx in advance!

    F7 works in all programs.
    Only on the z application that we added to the standard LM programs the F7 only zooms in on the web page.
    OS on the hand held is a windows mobile version, Browser is internet explorer.
    If we change it From F7 to F8 it works.
    I'm starting to think its the configuration file on the mobile device that is causing problems for the Z program but I can't come up with a logical explenation because it works on the other LM programs.
    gr,
    Frederik

  • Style declaration in mobile app problems (not working)

    Hello,
    In a simple mobile Flex app, I have a simple View that has a styleName assigned to a VGroup within it. The decleration is within the same view (for sake of trying to make this work, but it's in an external css if I figure out a way to make this work).
    The padding's I'm assigning are just NOT working at all. Nothing. While if I specify in the VGroup directly it's paddingTop or another style, it works fine
    Weird behavior.
    Here's the View:
    <?xml version="1.0" encoding="utf-8"?>
    <s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
            xmlns:s="library://ns.adobe.com/flex/spark" title="HomeView">
        <fx:Declarations>
            <!-- Place non-visual elements (e.g., services, value objects) here -->
        </fx:Declarations>
        <fx:Style>
            .myGroup {
                paddingTop:200;
                paddingLeft:300;
                paddingRight:30;
        </fx:Style>
        <s:VGroup styleName="myGroup">
            <s:Label text="Hello" />
        </s:VGroup>
    </s:View>
    Anyone have an idea why ?
    I'm using Flex 4.6/AIR 3.6 at the moment, tried it with Flex 4.9.1/AIR 3.4 too, same behavior.
    Is this a bug ? Am I doing something wrong ? Is there a hack/trick to make this work other than specifying the styles directly in the MXML ?
    Thanks.

    Just realized that the paddings in the VGroup aren't styles anymore but are properties. Damn those spark components
    I guess that's why, and I find it's a bummer. I know I could hack this, but damn me!

  • [SOLVED] Huawei E173s-1 mobile broadband dongle not working

    Update: check the wiki entry at https://wiki.archlinux.org/index.php/Huawei_E173s
    Hi,
    My dongle works out-of-the-box in Ubuntu but I can't get it to work in Arch Linux.
    I followed the instructions from this site: http://www.vivaolinux.com.br/dica/Modem … s-no-Linux
    /etc/usb_modeswitch.d/12d1:1c0b
    DefaultVendor=0x12d1
    DefaultProduct=0x1c0b
    TargetVendor=0x12d1
    TargetProduct=0x1c05
    CheckSuccess=20
    MessageEndpoint=0x0f
    MessageContent="55534243123456780000000000000011062000000100000000000000000000"
    /usr/lib/udev/rules.d/40-usb_modeswitch.rules
    ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1c0b", RUN+="usb_modeswitch '%b/%k'"
    # usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1c0b
    Looking for target devices ...
    No devices in target mode or class found
    Looking for default devices ...
    found matching product ID
    adding device
    Found device in default mode, class or configuration (1)
    Accessing device 003 on bus 001 ...
    Getting the current device configuration ...
    OK, got current device configuration (1)
    Using first interface: 0x00
    Using endpoints 0x0f (out) and 0x8f (in)
    Inquiring device details; driver will be detached ...
    Looking for active driver ...
    OK, driver found; name unknown, limitation of libusb1
    OK, driver "unkown" detached
    SCSI inquiry data (for identification)
    Vendor String: HUAWEI
    Model String: Mass Storage
    Revision String: 2.31
    USB description data (for identification)
    Manufacturer: HUAWEI
    Product: HUAWEI Mobile
    Serial No.: not provided
    Setting up communication with interface 0
    Using endpoint 0x0f for message sending ...
    Trying to send message 1 to endpoint 0x0f ...
    OK, message successfully sent
    Resetting response endpoint 0x8f
    Resetting message endpoint 0x0f
    Device is gone, skipping any further commands
    Checking for mode switch (max. 20 times, once per second) ...
    Searching for target devices ...
    Searching for target devices ...
    Searching for target devices ...
    Searching for target devices ...
    Searching for target devices ...
    Searching for target devices ...
    found matching product ID
    adding device
    Found target device, now opening
    Found correct target device
    Mode switch succeeded. Bye.
    # modprobe usbserial vendor=0x12d1 product=0x1c0b
    But when I run wvdialconf it can't find the modem:
    Editing `/etc/wvdial.conf'.
    Scanning your serial ports for a modem.
    Sorry, no modem was detected! Is it in use by another program?
    Did you configure it properly with setserial?
    Please read the FAQ at [url]http://alumnit.ca/wiki/?WvDial[/url]
    As a result I'm stuck with Ubuntu for the time being. ;( Any help would be very appreciated.
    Edit: running sakis3g after doing the above I was able to connect but I'd still love to know how to to make it work manually with wvdial.
    Last edited by jasewobble (2012-04-22 22:25:22)

    Hi
    Thanks for the advice above. Initially cleaned off original app
    I removed the software application from Mac HD/Applications/Orange Mobile Partner
    The kernel extension located at Mac HD/System/Library/Extensions/HuaweiDataCardDriver.kext
    The modem script located at Mac HD/Library/Modem Scripts/HUAWEI Mobile Connect – 3G Modem
    Then dragged the Orange MobilePartner file to the HD, selected 'Show Package Contents' and followed the advice above opening the .mpkg.
    Was about to try and return the dongle, but now after several tests, am sure it works
    Another Apple Discussion Board success

  • Youtube mobile Safesearch is not working on Firefox23. How can I turn safesearch on?

    How to reproduce:
    1. visit www.youtube.com mobile site using a tablet
    2. go to youtube setting and turn the Safe Search to ''On"
    (or edit PREF cookie's fms2 value to 30000)
    3. search the word like "porn"
    The result is not filtered.
    My user agent is "Mozilla/5.0 (Android; Tablet; rv:23.0) Gecko/23.0 Firefox/23.0" on Nexus Tablet.
    You can also reproduce this issue just by changing the user agent and visit youtube mobile site on your PC.
    Youtube mobile safe search is working in chrome browser.
    So I believe this issue is Firefox specific.
    Thanks.

    Hi!
    I'm able to replicate this on my mobile phone, interestingly though, Chrome, in the same phone (A nexus 4) has the same behavior.
    So it looks like a problem on their side. Thinking about it, it's hard to tell how could this be related to the browser.
    I would recommend rising the issue in the Youtube forum: http://productforums.google.com/forum/#!forum/youtube
    Best,
    Ibai

  • Page from Sample - Mobile Starters - jQuery Mobile with theme not working on mobile

    I created a new webpage - New - Page from Sample - Mobile Starters - Jquery Mobile with Theme and did not modify it.
    That does not work on an iPhone or Android.
    What am I missing? Is there an update to make the jquery mobilesite work?
    This is how it looks in dreamweaver
    http://ricston.com/push/test/screenshot_dreamweaver.png
    This is how it looks on my phone:
    http://ricston.com/push/test/screenshot_galaxy.png
    The page for the template is here http://ricston.com/push/test/test.html - As you can see, nothing has been changed.

    Thank you.  I was having the exact same problem.  I even upoaded the unmodified starter page, just in case it was something I did.  Inserting the viewport line fixed it.  (Now I need to go back and insert that line into each of the pages I was working on.)
    The question remains, however, as to why the mobile starter pages don't include that line in the first place.
    [edit] FYI - On Dreamweaver CC, it's under the "common" group within "insert".  (I would have expected it under "JQuery Mobile", but it's not there.)

  • T mobile broadband stick not working after lion instal

    T mobile broadband USB stick not working after lion install

    No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

Maybe you are looking for

  • Key figure present in Infocube but not in Transformation

    Hi All, I have added two new quantity key figures in my cube but I am not able to find them in Trnasformation from undelying DSO to the said CUbe. ALtough if i search for the Key figures in the cube i am able to see them but they are not present in t

  • Adobe Photoshop CC Reset and Most PSDs are corrupted

    I purchased a subscription to Adobe Photshop CC 2014 (2014.2.0 20140926.r.236) about a month ago and installed on a new Dell Precision 2850 laptop.  I've been using Photoshop consistently every day and have had no issues - until today. My Photoshop f

  • Flashed Radeon 9800 Pro died. Anywhere I can find a cheap X800XT?

    It seems that everytime I throw in an ATI Radeon 9800 Pro (AGP) that's flashed into my G5 DP 1.8 June 2004 PowerMac, it chews through it within a year or two, ending up killing the card with the infamous vertical lines in random areas of the screen.

  • What file type is this?

    Hi all, I am a Flash newbie. I like this video and would like to have a go at making something like this so I was wondering is it possible to tell how it was made ie whether it was made with Flash? If I right click on the video in IE 10 it says "Abou

  • Why can't I hear anything on my playback?

    So apparently on my Garageband, whenever I import an audio file from the Garageband library or my iTunes library, I cannot hear anything on the playback. However the volume meter on the bottom indicates that is it indeed audible however I cannot hear