G710 seems dead after restart but will eventually start.

If I restart my system, lights on the front act normal, but screen remains black for more than 20+ minutes - by black I mean nothing - no Lenovo screen or anything else.  Then if I hit a key or the touchpad, the login screen comes up as normal.  If I leave the lid open, I can "awaken" it as normal.  The front light indicates it's in sleep mode.  But if I close the lid for a time, it will take 20+ minutes before it comes up.  I first thought this was the result of the background install of an update, because it only happened once, but now it happens all the time.  
Thanks for any help anyone can offer up.

Not the case with most notebook computers, they rarely survive more than a year or two of use, regardless of being dropped or mistreated. The primary factor is related to the "lightweight" syndrome that has compromised cooling and impact resistance on the system components. Also - with computer technology advancing faster than most of us can keep up with, manufactures know that users will most likely trade in or upgrade on a yearly basis to take advantage of new offerings in connectivity, or better graphics / storage options.
I had an older P3 notebook that lasted almost 10 years, but you would not want to lug it around or drop it on your foot - it was built like a tank.
Cheers.

Similar Messages

  • Firefox was working, then when I clicked the icon to open, it said it needed to restart to complete a previous installation. After restart, it will not start at all, goes straight to crash report in regular and safe mode.

    The only recent changes to the PC are:
    Ran latest Microsoft updates.
    Installed Halo2, F1 and TinTin games (all purchased from store, installed off original CD)
    Installed DirectX
    Installed Microsoft Games for Windows Live and reditributable
    Installed Visual C++ 2005 redistributable.
    Have tried new installation of FF, won't install, repeats dialog about needing to restart to complete a previous installation (see question above)

    Below KB describes the article that also helps:
    http://support.microsoft.com/kb/839803
    To increase the timeout value in the registry, follow these steps:
    Start Registry Editor (Regedit.exe).
    To change the value data for the ServicesPipeTimeout DWORD value to 60000 in the Control key, follow these steps:
    Locate and then click the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
    Click the Control subkey
    Right-click the ServicesPipeTimeout DWORD value, and then click Modify.
    Click Decimal.
    Type 60000, and then click OK.
    If the ServicesPipeTimeout value is not available, add the new DWORD value, and then set its value data to 60000 in the Control key. To do so, follow these steps:
    Locate and then click the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
    Click the Control subkey.
    On the Edit menu, point to New, and then click DWORD Value.
    Type ServicesPipeTimeout, and then press ENTER.
    Right-click the ServicesPipeTimeout DWORD value, and then click Modify.
    Click Decimal.
    Type a value of 60000, and then click OK.
    The value is 60000 milliseconds and is equivalent to 60 seconds or to one minute.
    Note This change does not take effect until the computer is restarted
    Nikita

  • After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

  • My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

    My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

    1. verify on another Mac first. and another port.
    2. very likely dead SATA card
    read about it here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

  • I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

    I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • Dowload help queues up but will not start. Any ideas?

    My download helper places a download in the queue but will not start. I have a linux machine and a windows machine they are both doing the samething. A friend who has three computers has the same issue on all three. Any ideas. We have refreashed firefox. Reinstalled download helper and set all the updates. I have set all the conversion points as directed as well.

    See:
    *https://addons.mozilla.org/firefox/addon/video-downloadhelper/
    <blockquote>We are aware of downloading issues when using Firefox 36.
    We have been working for months on a 100% new version which works on Firefox 36+ (it does not work on Firefox 35 and below) and we just released a first test version. If you want to test this version and provide feedback on it, please follow this link.</blockquote>
    You can find a beta version here:
    *https://groups.google.com/forum/#!forum/video-downloadhelper-5

  • Power , but will not start

    I have an IBM t43.
    Last night left in hibernate and went to sleep.
    Will not start today. 
    When plugged in power light showed yellow, but is now green, but flashing.
    I have remove battery, hard drive, cd and memery and rep-laced. but will not start. no power. no noise
    Please some suggestions
     Steve
    [email protected] 

    Welcome to the forum!
    Let's try this: remove the battery, hard and media drives. Unplug the AC adapter. Press the "power" button 10 times in a row, holding it down for 10 seconds each time and 30 seconds the last time around.
    Plug the AC adapter back in and try to power on.
    Good luck and let us know.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • PSE 9 was running fine but will not start now and I get the following message:  This application has requested the Runtime to terminate in an unusual way.

    PSE 9 was running fine but will not start now and I get the following message:  This application has requested the Runtime to terminate in an unusual way.
    I have an HP Desktop running XP Professional and tried Restore but it didn"t help. I was just going to uninstall and re-install but I can't get in to deactivate.

    See if anything here helps:
    Troubleshoot C++ runtime errors | Adobe products | Windows

  • My macbook pro will turn on but will not start up.

    My macbook pro ['08 Silver keys] will turn on but will not start up. Screen is black and keyboard is unresponsive, besides power button. Help!

    ugh, no chime is not good, as that means it is not getting past the firmware POST phase.  Is the sleep light blinking fast?
    One thing to try is to access the RAM slots, remove, then replace and reseat the RAM.
    http://support.apple.com/kb/TS1365?viewlocale=en_US

  • [SOLVED] GNU Screen - sessions always dead after restart

    I recently started using GNU screen.  I'm able to detach and reattach sessions normally, except after a restart.  Then any detached sessions are marked as dead and all I can do is run a screen -wipe.  My sessions are stored in ~/.screen. 
    I've searched the web and forums but no one seems to have had this problem.
    Any ideas?  Screen's a lot less useful if I can't reattach after restarting.
    Last edited by noahsark1126 (2009-08-18 05:14:42)

    This is sort of related, but sometimes it is possible to use special software to suspend an application as a file, which could possibly be set up with screen to provide a rebootable state. However this software seems to be fairly hard to find and get working well enough to be usable. If you want to investigate more, you can probably google for something like "linux application freezing" or "linux application checkpointing".
    Actually I just found the software I was thinking of as I'm typing this, http://cryopid.berlios.de/. The page doesn't seem to be loading for me, but I think I have used this in the past with limited success. Not sure if it up to date with the latest kernels however.

  • I have windows 7. Firefox seemed to download ok but will not work. error message " firefox had a problem and crashed." It's a message from a "crash reporter" and gives me an option to send a crash report which I tried but it doesn't seem to send the messa

    I have windows 7. A new gateway laptop. Firefox seemed to download normally; however it will not start. I get a crash report if I try to open the browser.It never opened properly. I have uninstalled. reinstalled. rebooted. How do I get mozilla firefox on this laptop?
    == This happened ==
    Every time Firefox opened
    == After I downlaoded firefox ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    See http://kb.mozillazine.org/Firefox_crashes and [[Firefox crashes]]

  • CC 2014 on Yosemite shows applications launched after restart (but they are not)

    Wondering if anyone else is having this issue. Running Yosemite GM on a late 2009 27" iMac.
    All of the apps (except Bridge...which has been extensively discussed) appear to work fine. I routinely use Illustrator, PShop, After Effects, and Audition....no issues...
    When I restart my machine, however, and OS X goes to restore all of the apps that were open before restarting...that's when things get strange. In my dock, there are dots below the apps that were open, indicating that they've relaunched....although if I click on one of the icons in the dock to move over to that app, the app launches....it wasn't actually open although it shows as open and running in the dock. Furthermore, if you right click on one of the "running" icons after restart it shows the app as non-responsive and asks if you want to force quit.
    It really hasn't made any material difference in my work...like I said, all of the apps work (except Bridge when it comes to previewing AE presets) and it's just mildly frustrating....
    Anyone else have this issue?
    Thanks
    spark

    Jeff,
    I have two machines, a late 2009 27" iMac running Yosemite 10.10.2 with 12g of ram, and an early 2009 17" MacBook Pr with 8g of RAM, same OS.
    Creative Cloud runs perfectly on the MacBook Pro, all the apps hang on the iMac. I have disabled every extension, I have deleted CC and reinstalled, I have deleted all the apps and ran the cleaner and reinstalled everything, they still hang. I use dropbox and have unchecked the finder config, both machines. I use FontAgent Pro on both machines. Both machines have Skyfonts. I have no problem with any other app on the iMac or the MacBook Pro. No wifi issues. We just moved here 10 days ago, the problem started then. If it was unseated RAM, other applications would be affected, and they are not. Can you help?
    Nancy

  • On cold boot or restart, MacPro will not start unless CD Tray is open. Any ideas why ?

    On cold boot or restart, MacPro will not startup unless CD Tray is open. Any ideas why ?

    hello Singyt, the bug report associated to this kind of crash indicates that it might be a malware related issue.
    your crash report also shows a file named "urixalog.dll", which doesn't turn up any search hits on google, which is also slightly suspicious. could you search for that file on your pc and upload it to a site like virustotal.com in order to analyze it.
    please do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes].
    [[Troubleshoot Firefox issues caused by malware]]
    edit: the bug report also suggests that a monitoring program named spector pro/360/... which essentially acts like malware, might cause the issue. in case you have that installed please remove it. otherwise [https://support.mozilla.org/en-US/kb/Firefox%20crashes%20when%20you%20open%20it#w_backdoor-ulrbot-c here] would be a removal guide for urixalog.dll

  • Mac powers up but will not start up

    i have a mac pro that powers up but will not boot up

    Unfortunately not a good sign...
    See Here for Details...
    Grey Screen on Start Up
    http://support.apple.com/kb/TS3148
    Resolve Startup Issues
    http://support.apple.com/kb/TS1417

  • Phone flashes but will not start

    the phone is flashing at the start screen white than blue than red and will not start and powers down if unpluged i guess the battary has died but will not let me start to the connect to itunes either.

    Hello, rockinrolla. 
    Thank you for the question.  You may find this article helpful in troubleshooting your issue.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If the issue persists, see step 6 of the article.
    Regards,
    Jason H.

Maybe you are looking for

  • Flash player version problem

    I can go to this site ( http://www.adobe.com/devnet/security/security_zone/apsb06-03.html) and read about security issues but I need to present my boss with the consequences of having a lower version. I am talking about the type of vulnerabilities an

  • How do I get rid of Yahoo on bookmarks bar perminently???

    I want to use parental controls on Safari. They work great except if you delete the preference file for Safari, Yahoo comes back to the bookmarks bar. I don't want Yahoo on there for obvious reasons. Is there anyway to stop that from happening?

  • N79 compulsory attributes missing while installing...

    Gmail (mail application from Google) was working fine till now .. recently i formatted the phone using *#7370# after doing that when i tried installing the gmail application again it gives me a error saying compulsory attributes missing Tried formatt

  • Weblogic preventing financial reporting and RAF from being accessed

    Hi all, 11.1.2.1 (linux) Web logic has financial reporting and RAF in ADMIN mode which is preventing them beign accessed. All other components are fine. The web server config step succeeded and both products were listed as being configured. I logged

  • 3GS Carrier Issue

    Hi all, our chairman has an issue with his 3GS. When he goes abroad it doesn't automatically select a carrier for him. He has to manually go in to the settings and search for one. I've never seen this before. Does anyone have a solution?!