G729 transfer button inactive

Hi,
Got a weird problem with my CCM4.0(2)SR1; let me explain :
Have 2 different regions (central office + remote site); when I call from the outside to the central office (using the g711alaw codec), I may transfer calls to wherever I want; but when I call from the outside to the remote site (passing from the central office by a 3725 router, connected to the remote site by a vpn connection) and using the g729 codec, and I wish to transfer a call to another phone in the remote site, pressing the "transfer" hotkey does nothing.
BUT if I use the g711 codec to communicate between both sites, everything works well.
Conclusion : not enough bandwidth ? or misconfiguration?
Hope you can help me with that,

I think the problem i s due to misconfiguration. Try this link for troubleshooting CCM
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_troubleshooting_guide_book09186a00801e8bad.html

Similar Messages

  • Query on Web , Enhanced menu- Query properties- Transfer button not working

    Hello to all experts,
    When We execute a query from query designer on to the web, if a user wants to go to Enhanced menu->Query properties and select any of the options existing there example "Tabular view, supress zeros ect ect " when he clicks on the button "TRANSFER at the bottom " to transfer his selected options , nothing happens... I have never seen this ? Bw netweaver platform 3.5 highest running patch is SAPKW35012
    Does this have to do with any global query settings where tto look in for these settings? Also if this may help When we open query designer in local view I see that many buttons are inactive "Cell view" "Switch to global " ect and in Web application designer the "VIEW" option is grayed out as well ... Were are these settings maintained? Does anyone have any input , the most inportant being why iis the query properties "TRANSFER" button in Enhanced menu not working, i have seen no note on this
    Thank you
    Ayman

    Hi Andy,
    Nothing happened, meaning that the screen did not move, or the scaling factor was not set? Did you try to do it again?

  • How to setup the button inactive in pf-status?

    who can tell me how to setup a button inactive in pf-status so that the button is inactive when the program is running?
    there is a sample of button '&SUM' in PF-STATUS 'STANDARD'(lines 303) of program 'RM07MKON'.

    Hi huanzhiyu,
    In a custom (Z) program you can make PF status buttons and subsequently their OK codes inactive by using the following command:
    SET PF-STATUS 'STANDARD' EXCLUDING '&SUM'.
    And if you need to exclude more than one OK code
    data: itab type sy-ucomm occurs 0,
          wa type sy-ucomm.
    move '&SUM' to wa. append wa to itab.
    move '&ADD' to wa. append wa to itab.
    set pf-status 'STANDARD' excluding itab.
    Hope this helps.
    Regards,
    Aditya

  • HT4847 Why is the "done" button inactive when I try to downgrade my iCloud storage plan to 5GB free? Doesn't work from iOS device or macBook system preferences. I didn't sign up for a $40 plan.

    Why is the "done" button inactive when I try to downgrade my iCloud storage plan to 5GB free? Doesn't work from iOS device or macBook system preferences. I didn't sign up for a $40 plan.

    I found the solution .,,,
    1) click on your current plan and press done your payment details will appear .
    2) the first section is your plan and there is a botton "change" click on it
    3) it will take you back to the upgrade options
    4) press on the downgrade options
    5) choose the 5 GB and the done botton will be enabled
    6) click on it  you'll back to the step number 2 , here read carefully you'll see that your changes will take effect after the current plan expired with the date.

  • Transfer Button in Siebel Accounts Assets

    Hello all,
    The Transfer button in the Accounts > Assets screen is showing the following error:
    Cannot create business component 'Bulk Inventory Txn Popup VBC' for applet 'Asset Bulk Inventory Txn Popup Applet'.(SBL-UIF-00300)
    We added the Business Component Bulk Inventory Txn Popup VBC to the given Business Object Asset Management but the error pop up remains even after restarting the services. Are there any more Business Objects to add the Business Component to?
    Regards,

    I'm using Siebel 8.0. What if we installed the patch 8.1 would the error appear again? because we need to install it regarding our testing environment to test the BI Reports.
    BTW, What is the reports engines we can use with Siebel and what is the recommended one from your experience?

  • How make a button inactive after the click ?

    Hi,
    how can i make a button inactive after i clik on it ? I need it becasue i have one button which play my symbol (made with this nice course https://blogs.adobe.com/edge/2012/07/18/tutorial-leveraging-independent-symbol-timelines/) but it's not working when the button is in the symbol where there is animation, it's only working when the buttons is a symbol on the stage and on the top of all over symbols, so when i clik on it works and play the symbol that i want but after is still active so i can't place another button at the exact same place of the first because it will play the first button and i need to put 20 buttons, anyone can help me please ? My buttons is just an empty rectangle so i don't talk about turn of the visibility but turn of th "activity"
    Thanks a lot

    If you prefer you can put the code in compositionReady
    Here is a sampe on how to use a next and prev buttons to change data.I have some other examples I will add later but this one could give you an idea on how to do it.
    This one uses data from an array and then moves through the info:
    https://app.box.com/s/78ya0labbydgwogxra2a
    If you are playing symbols then use the rigth scope to get to them.
    I would make a array of the symbol names and use it the same way like I did the array for the info.
    sym.getSymbol(mysymbolArray[i]).play();

  • Snippet New button inactive

    Why is the Snippet New button inactive? It is grayed out and
    I can't create a new snippet. Without that, the whole snippet
    feature is wasted space at this point. I thought maybe it had
    something to do with the html page i had open, so i opened a new
    blank one not based on a template. Nothing.
    What's up?

    Mine isn't greyed out. What version of DW? What OS? Are you
    using the
    context menu (click on the little triangle in the upper right
    of the panel)
    on the Snippet Panel? Mine says New Snippet and it works
    fine.
    I don't even have to have a document open for this to work.
    How is yours
    different?
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
    A Beginner''s
    Guide, Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "BlueSkiesCreative" <[email protected]>
    wrote in message
    news:f0bdad$k7o$[email protected]..
    > Why is the Snippet New button inactive? It is grayed out
    and I can't
    > create a
    > new snippet. Without that, the whole snippet feature is
    wasted space at
    > this
    > point. I thought maybe it had something to do with the
    html page i had
    > open, so
    > i opened a new blank one not based on a template.
    Nothing.
    >
    > What's up?
    >

  • Evaluate button inactive during confirmation posting

    Hi Friends,
    I am working with SRM5.0.
    I have defined a survey and a questionniare for VE during confirmation.
    Have assigned a use group and a user with valid email address to the survey
    In define events for VE, I have made entries for transaction category "confirmation" and have selected "procedure" as "individual-sel. via button".
    I can call the questioonaire from SPRO using right click mouse button on user--> call questionnaire in WEB"
    Also required SICF services are active and I am able to perform VE on portal using Vendor List.
    With these settings, when I perform the VE for the specified product category, I am finding "Evaluate" button inactive during confirmation posting.
    Any hint for my issue? Pls suggest.
    Thanks
    Regards,
    Prashant

    Hi Prashant,
    1) In define events, trying keying in an "*" for vendor & P.Org, enter the source system as your SRM system. Did you assign the survey & questionnaire in this define events. Enter probability as 100. Then try to post a confirmation.
    2) Defining a user group is not mandatory. Hence, you may try to delete this & re-try if point no.1 does not work.
    Cheers,
    Akash

  • How to you get the transfer button in the lower right hand corner?

    I am trying to transfer my purchases from one computer to another through home sharing. The songs come up, but there is no transfer button in the lower right hand corner, so i cannot transfer the purchases. How do you get the button there?

    On the top-bar of iTunes, Under "advanced" click "switch to mini-player". That will automatically switch it to that size.
    You can change it back to normal size mode by clicking the "maximize" symbol.
    Of course, you can adjust the location of it on the screen at anytime by dragging its border (like any other program).
    Good luck!
      Windows XP  

  • Siebel - CCA Consultative Transfer button

    We are working with Siebel 8.0.0.5 and CCA 8.1 (I think) on Windows Environment.
    The customer wants to be able to do Consultative transfer, but the functionality seems to be broken. Here is what happens:
    1. someone calls in. Gets into the Queue. As soon an an agent becomes available, the call goes to that agent.
    2. Then the Agent (A) clicks on the Consultative Transfer button. A popup opens up and the agent selects another agent (B). During this time, the outside caller gets hold music.
    3. As soon as Agent A selects Agent B from the pick list, Agent B gets a screen pop and their phone rings.
    4. Agent A and B are able to talk but We cannot figure out how Agent A can then transfer the outside caller to Agent B. We have clicked all the buttons but the outside caller keeps getting the hold music and the call doesn't get released from Agent A to Agent B.
    Any one know what we may be doing wrojng?
    Thanks.

    You need to click on the 'complete transfer' icon in the CTI toolbar.
    This is the same button as the consultative transfer button. Once you have the third party on the line...that buttons function toggles to the 'complete transfer' function.
    If you mouse over it you will see the tool tip change to 'complete transfer' once you are talking to the other agent and the original caller is on hold.

  • Media Manager button inactive

    THe Media Manager button in desktop is inactive. This seems to be the only way to transfer excel files to Docs to go. How can I get the button activated to I can transfer excel files to my 8900?
    I just upgraded from an 8700g to 8900.
    Michael D
    Blackberry 8900

    infael wrote:
    THe Media Manager button in desktop is inactive. This seems to be the only way to transfer excel files to Docs to go. How can I get the button activated to I can transfer excel files to my 8900?
    I just upgraded from an 8700g to 8900.
    Hi and Welcome to the forums!
    Your assumption is incorrect -- media manager is not the only way to transfer files. See this thread:
    http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Disk utility - can't restore image - button inactive

    Hi,
    Can anybody tell me why the restore button in disk utility / restore tab, is inactive? Even after choosing the source image it stays that way. It's a USB flash drive that I'm trying to restore on. Any help would be great! Thanks!

    Okay, found it. You have to drag the drive onto the lower field. That should do the trick.

  • GRC 10.0 - create role - Edit button inactive

    Hi,
    when trying to create role ((Business, Composite, Single etc.) in NWBC - AM - RM - Role Maintenance --> 'Create', it`s not possible to enter details as everything is grey and Edit button is inactive.
    Also it`s not possible to modify already existing roles which were created using Role Mass Maintenance - Role Import tool. All fields are grey and Edit button is inactive as well.
    Settings are checked, role types are active and user has full access.
    Did someone have such problem? Any idea what can be missing there?
    Thanks in advice for any advice.
    Regards,
    Aga

    Dear Aga,
    please check the following note: http://service.sap.com/sap/support/notes/1700890
    Hope this helps to understand and fix the issue.
    Regards,
    Alessandro

  • Add button inactive in Match record step in Import manager

    Hello,
    In the Main table, I want to see the country data as 'US; United States' in country field.
    I have made both 'country code' and 'country description' as display fields in the country flat lookup table.
    When I load country code and country description from import manager from an excel file, the 'Add' button in Match records step is inactive for both the fields.
    How can I do the matching in import manager without sacrificing my requirement of showing country as 'US; United States' in main table ?
    Thanks,

    answer to this question is already available in forum.

  • Buttons inactive when the playbar reaches the project end

    Hi
    I am using Captivate 6.
    I am creating a standard UI template file. I have added a smartshape button that opens up a PDF file for download/ save. This button is visible and active throughout the Captivate project right from the first slide (timing set to Rest of the project).
    The problem is when the playbar reaches the end of the project, this button gets inactive.
    I checked in the forums and found a similar query in this post.
    http://forums.adobe.com/message/3735858#3735858
    Based on the info there, I checked the frames in the project (in Project Info) and the last frame where the playbar ends. I noticed that the last frame of the playbar is 2 frames more than the frames mentioned in Project Info.
    Again, taking a cue from Lilybiri's comments in that thread, I added one advanced action at the On Exit of the last slide:
    Expression: cpCmndGotoFrame = cpInfoCurrentFrame - 2. (to send last frame count back by 2 frames)
    Assign: cpCmndPause with 1 (to pause the last slide, so that the learners can do any other task on the last slide if they wish to)
    This solves the problem.
    However, is there a way to make this button remain active without using advanced actions? This template will be used by some newbies to Captivate. I feel they might think that assigning advanced actions is complicated task and hesitate to use this one.
    Sreekanth

    Thanks from me as well. I'm trying to make an interactive house simulation game (basic) and hit this issue where the timeline needs to skip to the next segment as several options are available per room (listed one after the other in the timeline). Flash isn't particularly easy to use when it comes to this kind of thing. Is Flash Catalyst CS5 more suited to this?

Maybe you are looking for