G780 Fn+F6 on\off touchpad is not working

Not having Fn F6 to disable the touch pad is a most annoying problem on my G780.  Had to do a windows 7 (64 bit) clean install a couple of months ago.  After selling me Windows 7 discs Levono support has been zero help.  I have a wireless mouse connected to a USB port and the only way I can disable the touch pad is to bring up the Mouse Properties window.  I reinstalled the 0qto10ww.exe mouse driver a couple of time.  ANY suggestions would be appreciated. 
Moderator Note; subject edited

hi
This should be done on a WIndows 7 System.
If this check box does not exist,
Follow this step
Open a Blank notepad
Copy the text below on it
Spoiler (Highlight to read)
[HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTPEnh] "DisableIntPDFeature"=dword:00000033
[HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTPEnh] "DisableIntPDFeature"=dword:00000033
Save the file as mouse.reg
Now double click it, to import it into the registry.
Open the Synaptics settings again and your should have the checkbox above
Let me know your findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • The click at touchpad is not working, please help!!!

    I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!

    For this issue AppleCare support told me to so a SMC reset as follows:
    Power the machine OFF.
    At the SAME TIME hold down the following buttons:
    Shift
    Control
    Option
    Power
    Then release all buttons.  Power up the Macbook and see if the trackpad button work.
    Hope this helps.
    Bill

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Touchpad does not work even after format - x220t

    Hi there,
    I've had my X220 tablet for about 10 months and it has been great.  For the last month however, the touchpad and touchpoint have become flaky.  When rebooted or coming out of standby, the touchpoint/touchpad often did not work; after resetting a few times, i would work, but then stop working again when the system when into standby mode.
    I thought this was a driver issue, but uninstalling and reinstalling to the newest drivers did nothing.  I have also updated/reset the BIOS.
    I have more recently have not been able to get the touchpad working at all now and relying on just the touchscreen for input is very frustrating. 
    When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck.  The touchpoint/touchpad did not work even in Windows 8.
    I read around a bit and have tried disabling JUST the touchpad in the BIOS, and amazingly, the touchpoint will work fine when I do that.  When I disable just the touchpoint or leaving both enabled, neither the touchpad or touchpoint will work.
    As far as I can tell from what I have been able to diagnose, the touchpad is damaged and is causing a conflict with the touchpoint when enabled.  I am not sure of this, but it is my belief now.
    Are there solutions out there for me?  I do have 2 months left on my warranty, but I hope to keep mailing my notebook in for support as a last resort.
    thank you,
    steve

    xyster wrote: 
    When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck.  The touchpoint/touchpad did not work even in Windows 8.
    If you are ready to reinstall Windows, try this method:
    http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/My-X220t-Clean-Install-Method/td-p/6612...
    If after that your trackpoint/touchpad still don't work, I think one of them (or both) is defective.
    X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
    IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1

  • I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother was signed into it but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working

    I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother is signed into it because I didn't have any credit to make an ID so he signed in so I could download apps but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working please help.

    Apps are locked to the Apple ID that was used to download them. You will have to sign in as your brother in order to update it.

  • Touchpad is not working properly on Satellite L30-X10

    Hi to all of you.
    I've got the following issue: On my notebook the scroll on the touchpad is not working. If somebody can tell me how to fix this problem it would be kindly appreciated.

    Hi,
    I am not sure if this can be a good solution but maybe its worth to try it:
    1. Download the latest touchpad software from here:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    2. Remove the old software
    3. Reinstall the downloaded software
    4. Go into your mouse properties and check if everything is configured (especially the scroll function)
    Give some feedback in case of further questions..
    Cheers

  • Tecra M3 - touchpad is not working with Windows 7

    I have a Tecra M3 that I have updgraded to Windows 7. The touchpad is not working.
    The Toshiba website does not have Windows 7 drivers for this model. I have tried installing the touchpad driver and TVAP from the A11 model but still cannot get it to work.
    Can anybody help? The audio doesn't seem to be functioning either.

    Hi buddy,
    As Silas wrote, it could be a little bit problematic to find the correct drivers because it doesnt support Vista...
    You should try a touchpad driver from another model like Tecra M4. This should work.
    But Im wondering about this. Basic functions of touchpad should also work without special driver.
    Can you use the touchpad at the moment?

  • Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the n

    Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!

    Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!

  • HT5622 I dowloand  ios7 but is not working FaceTime and iMessage.I tried turn off but still not working.

    I download IOS 7 I'm really dissapoint because my FaceTime and iMessage is not working.I tried turn off but is not working.:(

    Try resetting the SMC.
    MacBook and MacBook Pro with a battery you can remove
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer
    To reset the SMC on newer Mac portables with a battery you cannot remove
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.  
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • HT1414 my wi fi on/off button is not working. any suggestions?

    my wi fi on/off button is not working when i touch it. any suggestions on how to fix it or what to do?

    Is it disabled, that is "grayed out"?  If so, see this thread, and good luck: https://discussions.apple.com/thread/4313031?start=0&tstart=0
    If not, turn phone off/on again.  If that doesn't do it, reset by holding down the power and home buttons until you see the apple logo (ignore the slide to turn off message).  Finally, you can try restoring the phone from backup.

  • My off switch is not working

    My off switch is not working on my iphone 5

    Make an appointment at an Apple Store and have them evaluate the device and possibly replace it if still under warranty.
    In the meantime, you can enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
    Settings>General>Accessibility>AssistiveTouch: turn ON
    *Note* If you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device if your Sleep/Wake (power) button is not functioning. You will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

  • Re: Satellite L500D - Touchpad "touch" not working

    Hi everyone,
    my touchpad's touch function (to emulate left-clik by tapping the touchpad) is not working any more. I can move the mouse with the pad.
    Also the left button below the pad is not working - the right one is.
    I've already tried :
    -Updating the driver
    -Fn+F9
    -The touchpad settings - the "touch" function is enabled
    -The Toshiba hardware test - passed
    but with no success.
    Not sure whether it's a software issue or a hardware one.
    Any suggestions?
    Thank,
    Andres

    Hi
    As far as I know the option is called Tap to Click
    You should check if this enabled in the touchpad settings.
    >Also the left button below the pad is not working - the right one is.
    Maybe this has something to do with the fact that the left click by taping is not working
    Its hard to say what could cause this
    As I said; the options should be checked once again in control panel -> mouse -> device settings -> settings (or properties)
    If all the settings would be ok, then a touchpad hardware issue might be possible

  • Touchpad is not working anymore after Windows Update

    Issue:
    After a Microsoft Windows update it may occur that the touchpad is not working anymore.
    Resolution:
    Press the shortcut function keys (typically F5 or Fn+F5) to enable the touchpad again. Please refer to the user manual of your notebook to find the correct key combination for enabling the touchpad.
    More Info: aps2.toshiba-tro.de/kb0/TSB5303QQ0002R01.htm

    Check the settings:
    Press FN+F9 or hotkey to turn on touchpad.
    If the problem persists then enter the BIOS and make sure BIOS is set to default.
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Hi , I have problem with my iphone 4s the wifi I can't put it on or off it's not worked with me , so what can I do plz answer me as soon you can

    Hi , I have problem with my iphone 4s the wifi I can't put it on or off it's not worked with me , so what can I do plz answer me as soon you can

    if it wont turn on or off the wifi ground connector could be loose. backup and restore the phone to new and see if it works then if not take to someone who fixes iphones

  • HT1212 My on and off button is not working anymore and my iphone fell again today so the numbers 7,8,9 not working and so i cant enter my password to access my iphone. Pls, what can i do about this to access and change my password?

    My on and off button is not working anymore and my iphone fell again today so the numbers 7,8,9 not working and so i cant enter my password to access my iphone. Pls, what can i do about this to access and change my password?

    Changing your password won't help. It is a touchscreen so if 7,8,9 are not working then that part of the screen will not work if you were to get it unlocked.
    TeeKnows is right. You need to contact Apple for a repair.

Maybe you are looking for

  • Possible to change the Portal Timeout webpage?

    We have set it up so our portal users timeout if they have been inactive for 30 min. The problem is when the comeback from a period of inactivity, click on a link, and then are redirected to a webpage informing them that their session has timed out i

  • How to retain the same input filename with FileAdapter

    I use FileAdapter to read a file. I need to archive the file using the same filename. So I copied the input file to another FileHeader then write the file to the archived directory using FileAdapter. But the archived file does not retain the original

  • Datafiles Dropped at OS level.

    Hi Team, Please help I have dropped the datafiles at OS level. The db in not in archive log mode and we dont have backup. Its a UAT daatabase. .. Is it possible to take export and recreate and import the db if we drop the datafile..? Or is there any

  • Problem Adding Ram - no boot with 4GB installed.

    I am trying to upgrade a macbookpro4, 1 (early 2008). I got it to see 3GB (one 2GB SODIMM and one 1GB SODIMM) but it won't boot with  two 2 GB SODIMMs installed. They are PNY DDR-2 PC2-6400 (compatible with 800 MHz, 633 MHz & 533 MHz). (It is not a p

  • Calcuate Hours: Minutes:Seconds between two dates excluding Weekends

    Hello All, @StartDate = '2014-06-21 13:37:30:037' @EndDate = GetDate() I want to find out Hours:Minutes:Seconds between the above dates EXCLUDING WEEKENDS. Please help. ReportingServices