GA date for DocuMaker 11.3

Can anyone tell me the ga date for Documaker11.3, or tell me where I can find it, please?
Thanks!

I am assuming you are trying to determine when support ends for 11.3, Please see the following. This is the Oralce Lifetime Support brochure/policy. This is offical and is updated by Oracle when needed regarding previous releases. Releases under Oracle are found under My Oracle support. I believe that 11.3 was relased in 2008 and it was a grey area before Documaker/Skywire was fully Oracle.
http://www.oracle.com/us/support/library/lifetime-support-applications-069216.pdf
All this notwithstanding, 11.3 is on Oracle's rolling support cycle where products generally are under full support for 5 years. The base assumption is that you will continue to upgrade therefore always be fully supported, if there is a specific reason that you require support on a product which is "out of cycle" you have options.

Similar Messages

Sorting files for distributed systems for Documaker

Hello,
I've been asked to research tools that will assist with fast sorting of files for the distributed systems for Documaker. Unfortunately, I have not had any exposure to Documaker so I'm starting from scratch. Anyone have any experience with this?
Thanks in advance,
Ron

Easy enough!
BCH files can be sorted by any number of means depending on what you would like to do and when you want to do it, and the complexity of your sorting requirements. Documaker includes some rudimentary sorting capabilities, but since there are so many other options available this is not something we have focused on as a desired feature. You can browse the system doc for more details on that. Otherwise... if you're running in multistep mode then you have access to the BCH file, in which case you can sort it using whatever is appropriate to your OS: MVS folks have syncsort, Linux folks have just about anything from perl to sort, Windows folks have a sort command as well. It so happens that those items I've mentioned are all solutions I've used for customers. If you're running single-step, then you won't likely have the BCH file available to use, and will have to write a custom rule in your CUSLIB for Documaker to sort. In this case, you would have to have access to a sorting application that provides an API. I've used Opt-Tech Sort for customers in the past, and it's definitely both affordable and powerful (and multiplatform).
NA and POL files generally do not require sorting and I would highly recommend that you steer clear of messing with those files unless you have a darn good reason to do so. Primarily you don't need to sort them because the print output is controlled by the BCH file so if you reorder the BCH, the print reflects that order. The NA file contains the variable data, and the POL file contains the forms and sections and recipients for the transactions.
Printstream sorting is an entirely different animal. I haven't been too involved with printstream sorting because it is both 3rd party and happens outside the Documaker realm, but I can tell you that most customers use facilities provided by their print controller (depending on the type of printer) or they use tools like StreamWeaver (in fact that's probably the best one IMO).
Hope this helps!
Andy
Edited by: Andy Little on May 20, 2010 12:09 PM

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

"use cellular data for" apps keep turning back on

ie. go in, slide bar from green to off for facetime, youtube, etc...go out of Cellular, back in, and those apps show green for "use cellular data for".
At first I thought it was an issue with some versions of Angry Birds, as they don't all do this. Then realized facetime, youtube, facebook, etc.. all do this.
Works fine on two other iphones. Running latest ios on 4S
The fact it doesn't do it for all apps is what I find is strange. Thought at first it was an issue with Rovio apps, but then realized even facetime does this.
Thanks

I'd like to know why there is not solution to this. I think I'll just remove all those apps that are turning their 'use cellular' data back on. I only cared because when my kid plays angry birds, my cellular data was being used for videos. Oh well, I guess I'll have to remove apps or get a new data plan.
<Edited by Host>

Have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
If you need help making this change let us know! Have a safe trip!
NicandroN_VZW
Follow us on twitter @VZWSupport

Can we load data for all levels in ASO?

Hi All,
Im creating cube in ASO
can i load data for all levels in ASO
we can load data for all Levels In BSO but in ASO i need confirmation????
and one more
wat is the consider all levels option in ASO is used for ? wat is the purpose?
Can any one help ,it would be appriciate.
Thanks

In an ASO cube you can only load to level zero
The consider all levels if used for aggregation hints. It allows you to tell the aggregation optimizer to look at all levels when deciding if aggregation needs to be done on the dimension

Can we load data for all levels in ASO cube

Hi All,
Can we load data for all levels of members in ASO cube in 9.3.1.
Regards

Yes you can load data for all levels in an ASO cube in any version HOWEVER, none of the upper level data in any cube will be there when you look for it. You will get a warning message in the load because ASO cubes don't store data at upper levels. It is the same as loading data into dynamic calc members in BSO cube. It will do the load without compalints, but there will be no data there (At least you get the warning in ASO)

Historic and Current data for Master data bearing objects

Hi All,
We are trying to implement type 2 dimensions for all the master data bearing characteristics, where we require historic and current data available for reporting. the master data can have a number of attributes and all of them can be time dependent. We are not getting any 'datefrom' or 'dateto' from the source system.
For example:
For Example: The table below shows data entering BI at different dates.
Source Data day of entering BI
MasterID ATTR1 ATTR2
123506 Y REWAR day1
123506 N REWAR day4
123506 Y ADJUST day4
123506 N ADJUST dayn
The field 'day of entry into BI' is only for your understanding; we do not get any date fields from the source. SID is the field we are generating for uniqueness. It is a counter. EFF_DATE would be the current date for all the data. EXP_DATE would be 31.12.9999 until the attributes change. SID and MasterID together would be the key.
On day 1 the following data enters BI,
day 1
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
1 123506 Y REWAR 2/10/2009 12/31/9999
On day 4, 2 data records enter with same PID,
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
2 123506 N REWAR 2/13/2009 12/31/9999
3 123506 Y ADJUST 2/13/2009 12/31/9999
the EXP_DATE of the record of day 1 needs to be changed to current date.
Also there are two records entering, so latest record would have EXP_DATE as 31.12.9999. And the EXP_DATE of the first record on day 4 should change to the current date.
so the following changes should happen,
CHANGE
SID MasterIDATTR1 ATTR2 EFF_DATE EXP_DATE
1 123506 Y REWAR 2/10/2009 2/13/2009
CHANGE
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
3 123506 Y ADJUST 2/13/2009 2/22/2009
On day n, one data record enters with same PID,
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
4 123506 N ADJUST 2/22/2009 12/31/9999
The change is ,
CHANGE
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
3 123506 Y ADJUST 2/13/2009 2/22/2009
The data expected in P-table is as below, on Day n or after Day n, untill any other record enters for this MasterID,
1 123506 Y REWAR 2/10/2009 2/13/2009
2 123506 N REWAR 2/13/2009 2/13/2009
3 123506 Y ADJUST 2/13/2009 2/22/2009
4 123506 N ADJUST 2/22/2009 12/31/9999
Has anyone worked on type 2 dimensions earlier? Or any ideas to implement this logic would be appreciated.
Regards,
Sudeepti

Compound the Master ID with eff date and other attribute as superior objects
so you will get P-table as
ATTR1 ATTR2 MAT ID
1 2/10/2009 2/13/2009 123506 Y REWAR
2 2/13/2009 2/13/2009 123506 N REWAR
3 2/13/2009 2/22/2009 123506 Y ADJUST
4 2/22/2009 12/31/9999 123506 N ADJUST

Unable to install SQL Server Express 2008 R2 - Errors "Failed to retrieve data for this request"

As domain admin I am attempting to install "SQL Server 2008 R2 with SP2" but it keeps failing with "Failed to retrieve data for this request".
The installation never actually starts, it errors before then.
It displays the same error even if I run the System Configuration Checker.
The summary.txt for the install displays the following text:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -1554760125
Exit facility code:            852
Exit error code:               15939
Exit message:                  Failed to retrieve data for this request.
Start time:                    2014-08-15 16:49:52
End time:                      2014-08-15 16:50:06
Requested action:              RunRules
Machine Properties:
Machine name:                  servername
Machine processor count:       8
OS version:                    Windows Server 2008 R2
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  Yes
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Package properties:
Description:                   SQL Server Database Services 2008 R2
ProductName:                   SQL Server 2008 R2
Type:                          RTM
Version:                       10
SPLevel:                       1
Installation location:         c:\84122ef5b6d9cdcd3b2ac48cec\x64\setup\
Installation edition:          EXPRESS
User Input Settings:
ACTION:                        RunRules
CONFIGURATIONFILE:
ENU:                           True
FARMACCOUNT:                   <empty>
FARMADMINPORT:                 0
FARMPASSWORD:                  *****
FEATURES:
HELP:                          False
INDICATEPROGRESS:              False
INSTANCENAME:                  <empty>
PASSPHRASE:                    *****
QUIET:                         False
QUIETSIMPLE:                   False
RULES:                         GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2008InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck
UIMODE:                        AutoAdvance
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140815_164944\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
    Message:
        Failed to retrieve data for this request.
    Data:
      HelpLink.ProdName = Microsoft SQL Server
      HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
      HelpLink.LinkId = 20476
      DisableWatson = true
    Stack:
        at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
        at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
        Message:
                The network path was not found.
        Data:
          WatsonData = [email protected]rror
        Stack:
                at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.CreateBaseKey(ServiceContainer ctx, String machineName, IntPtr hKey, String keyName, RegistryAccess access, RegistryView
view)
                at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocalMachine(ServiceContainer ctx, String machineName, RegistryAccess access, RegistryView view)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
                at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)

    Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
        Message:
                The network path was not found.
        Data:
          WatsonData = [email protected]rror
Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you remove all SQL Server components from add remove program
I strongly recommend you to have a good look at below thread
http://support.microsoft.com/kb/2000257/en-us
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Service Desk: Pricing data for partner could not be read

Hi all,
I am trying to configure the Service Desk functionality for Service Providers (on EHP1).
I follow the SAP Documentation (SAP Solution Manager: Service Desk for Service Providers) and SLA's made easy in SAP Solution Manager. Also some discussion threads helped me with some steps (I applied e.g. the recommendation from Pricing data for partner 106 could not be read. , but it didn't help).
I am facing some errors related to the CRM part of the configuration.
When I create Service Desk Contract (SLFV) in CRMD_ORDER, the error appears Pricing data for partner xxx could not be read. I checked the setting of BP and I am not able to find the reason, for customer's (sold-to-party) BP the sold-to-party > Sales Area Data the Sales Organization/Distribution Channel/Division are maintained. Which information for pricing is needed and where can it be configured?
Another error - I am sure it is related to the first one - the service contract cannot be determined in the service message (in Item details view under product). The error messages are about sales area/organization, so I suppose there is something wrong with the link Service Contract -> Business Partner definition.
Could you please help me what can cause the error?
Thanks in advance,
Vaclav

Hi Balaji.S,
my problem was solved when I double checked the settings of org structure. That means there must be a consistent setting for sales organization / distribution channel / division in businness partner (tcode BP), organizational model (PPOMA_CRM), product workbench (COMMPR01). The setting must be same for both the sales department of the service provider and the customer's company (I am sorry I am not CRM, so I am following just this simple logic)
In the long text of the error (in CRMD_ORDER) I could see "expected" combination for sales organization / distribution channel / division (message e.g. The access was carried out with sales organization 'O 50000613', distribution channel '01' and division '') -> when the org model was set up everywhere in this way, the contract was automatically filled by the organization data and in the next step the contract could be determined in the service desk message.
Anyway it took some time to find out the correct combination. Deeper CRM knowledge would help me much.
Vaclav

What is this message: Base Line Date for rule 11 not set ?

Hello all,
I am doing some test.
Cenario:
I need to create a Scheduling Agreement in transaction: VA41
The material I am using to create the VA41, I have just created.
I created in MM01 the views: Basic Datas 1 and 2, Sales View 1,2 and 3 and Account View 1.
Issue:
When I am creating the VA41 and I enter the material, the system shows the messages:
1) Dates from:: Base line date for rule 11 not set
2) Dates from:: Base line date for rule 9 not set
*obs: the messages dos not block the creation of VA41. It is a information message.
Question:
What that means? What will happen if I do not fix that? What should I do in order to not have more these messages?
Tks & Rgds,
Barbara
Message was edited by:
Barbara Barbos

Hi
Please check whether you have assigned - payment terms both at company code and sales area level
VVR

Issue with Apex and IE , losing data for items on submit

Hi All,
I am facing one problem in APEX when i run my page on IE 8. When i submit the page i lose the data for all my items while the same does not happen on Firefox mozila and Google chorme.
Actually i have one select list which has one dynamic action associated with it when i select the options from this list other object become enable and disable with that action and page get submit.
but when i select this list in IE page get submit and my value which i selected also get lost.
Please let me know if this is some issue with IE or Apex as soon as possible.
This is bit urgent.
Thanks

Modify your code as below and run the page in debug mode and note the value shown for p610_x DECLARE
l_vc_arr2 APEX_APPLICATION_GLOBAL.VC_ARR2;
BEGIN
wwv_flow.debug('value for p610_x is ' || :p610_x);
l_vc_arr2 := APEX_UTIL.STRING_TO_TABLE(:P610_X,'~');
FOR z IN 1..l_vc_arr2.count LOOP
htp.p(l_vc_arr2(z) || '
END LOOP;
END;varad

Problem while refreshing the data for the second time using excel services in sharepoint 2013...

Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.Meenakshi

I am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi

Sharepoint Web Analytics no data for reports

Hi all,
I would like some assistance in troubleshooting the web analytic problem I am experiencing with one of my farms.
My web analytics reports stopped beeing generated recently and the uls logs have not been helpfull at this point.
I have checked the following:
Verified that the Web Analytics Data Processing Service and Web Analytics Web Service are started on the server.
Made sure web analytics service application is started.
.USAGE files are being generated on the WFE
Noticed that the SharePoint Logging database (LoggingDB) DOES not contains any information.
I think this is where my problem resides, I have tried to create a new Web Analytics services application, with a new staging and logging database, but no luck.
I have also tried to create a new wss_logging db, still no luck.
I have made sure that the account that runs web analytics has the correct SQL db right on the logging db. still no luck.
Your assistance is highly appreciated.
Clifford - South Africa

Generally it take 24 hrs to generate analytics data.
Check if below jobs are active:
Diagnostic Data Provider: Event Log
Diagnostic Data Provider: Performance Counters – Database Servers
Diagnostic Data Provider: Performance Counters – Web Front Ends
Microsoft SharePoint Foundation Usage Data Import
Microsoft SharePoint Foundation Usage Data Processing
http://pinchii.com/home/2012/03/site-web-analytics-reports-show-no-data-in-sharepoint-2010/
Also try steps from:
http://blogs.msdn.com/b/sharepoint_strategery/archive/2012/03/16/troubleshooting-sharepoint-2010-web-analytics.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0728b722-29e1-4de3-87ee-45ac40242ccf/web-analytics-no-data-for-sites?forum=sharepointadminprevious

Load Test Results - time series request data for by URL in VS2013

I am trying to figure out how to export and then analyze the results of a load test, but after the test is over it seems I cannot find the data for each individual request by url. This data shows during the load test itself, but after it is over it seems
as if that data is no longer accessible and all I can find are totals. The data that I want is under the "Page response time" graph on the graphs window during the test. I know this is not the response time for every single request and is probably
averaged, but that would suffice for the calculations I want to make.
I have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
My goal is to plot (probably in excel) each request url against the user load and analyze the slope of the response time averages to determine which requests scale the worst (and best). During the load test I can see this data and get a visual idea but when
it ends I cannot seem to find it to export.
A) Can this data be exported from within visual studio? Is there a setting required to make VS persist this data to the database? I have, from under Run Settings, the "Results" section "Timing Details Storage" set to "All individual
details" and the Storage Type set to "Database".
B) If this data isn't available from within VS, is it in any of the tables in the LoadTest2010 database where all of the summary data is stored?
Thanks
Luke

Hi Luke,
Since the load test is used to
simulate many users accessing a server at the same time, it is mainly verify a wev server load stress.
As you said that you want to find the data
for each individual request by url, I know that generally we can analyze the url request from the Summary like the following screen shot.
>>I
have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
I suggest you can try to add the
SQL Tracing Connect String in the Run Setting properties to trace the data.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/74ff1c3e-cdc5-403a-b82f-66fbd36b1cc2/sql-server-tracing-in-visual-studio-load-test?forum=vstest
In addition, you can try to create an excel to analyze the load test result, for more information:
http://msdn.microsoft.com/en-us/library/dd997707.aspx
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

GA date for DocuMaker 11.3

Similar Messages

Maybe you are looking for