GA749 start date does not include any senders in FAGLGA35

Hello Guru:
I do FAGLGA31 for sender = account 1-99999 profit center 1 and receiver = profit center 2
version = 1 .
when run cycle execute message "GA749 start date does not include any senders"
I check in table FAGLFLEXT , there is data in Sender cost center and Profit center according to my criteria.
Please advise where to check up and thanks in advance

HI,
please check the following:
The problem could be caused by the cycle header definition. Instead of
'0' you have to enter '1' as a version. All actual data gets posted
under version 001 in NewGL by system default, so if you specify the
version other than '1', the sender value is not found when executing the
cycle.
Regards
Madhu M

Similar Messages

Elements 10 backup from XP - restore to W7 - restore does not include any duplicated pics

Hi, hope someone can help?
I am a new user to Elements10 and originally installed it onto an XP desktop.    I have since upgraded the desktop to Windows7 and want to transfer my images and elements catalog. I have performed a full backup of my catalog from the XP os, via the backup process in Elements (which says successful) and performed a restore onto the W7 desktop retaining the original folder structure (also via Elements).
Despite doing this several times, I always get error messages saying the restore cannot restore a selection of .xml files, but if I continue with the backup it finally says "successful".
However when I compare the number of restored images, with the originals, it appears I am over 700 files short!       A bit of investigation indicates that the restore is not restoring any duplicate images (those with identical file names but in different folders), but only restores one copy of the image.    I can't check all 700 files individually, but can someone confirm if this expected behaviour, so that I can stop worrying that I have lost 700+ images?
Thanks
Steve

stevew218 a écrit:
Ah... as per my 1st post, I am a new user to Elements.    Apologies, I have been approaching this from the wrong direction!   I have checked back on my original XP disk and Elements catalog, and it appears that when I set up the original catalog against my existing pics it did not include any duplicate files, therefore the Backup\Restore is correct, it is the original cataloging of my pictures that did not work as expected.     Do I have to do anything specific to get the catalog to include duplicate file names?
Sorry for the misdirection
Steve
Steve,
The basic rule of database management is to forbid duplicates.
In the case of the Organizer, that would mean changing one of the two above criteria (date daken or file size in kB). That would be possible outside of the Organizer by using external tools, but the problem is that you don't know which files are concerned...
Now that you have restored your catalog in your new catalog, a theoretical solution would be to get back to the old catalog, and use the organizer to delete all the files in the catalog. The remaining ones would be the duplicates. Creating a new empy catalog and importing the remaining files would recover all duplicates. You could then restore on the new PC.
There are still two problems:
- You can't delete a big number of files at the same time? You'd have to delete by small batches
- You'll have all your duplicates in your new PC, but you still won't be able to include them in the main catalog even you have now a special catalog with only the duplicates.
So, the final question may be : why do you want to keep duplicates? You can examine the duplicates catalog and see if they are really necessary. Maybe you can live with two different catalogs.

Update of Planning Start Date does not update macros

I have written a program to update the planning start date in a planning book using function /SAPAPO/MSDP_PB_SAVE_DVIEW_TAB. I have included this in a process chain. The update is immediately followed by a /SAPAPO/TS_BATCH_RUN variant that runs a macro in the updated book. The macro uses planning start date. The issue is that the macro does not appear to have been updated with the new planning start date. I experimented with using transaction Define Planning Book (/SAPAPO/SDP8B) whilst also in Macro Workbench on another session. If I change the planning start date this is also not reflected in the macro unless I come out of the Macro Workbench completely and fo back in. This appears to be a buffereing issue.
Does anyone know if there is a way to force the macros to be updated? Otherwise I may have to resort to just putting a delay in the chain and hoping the maco will be updated before it is run.
Thanks
Edited by: Peter Phillips on Mar 19, 2010 11:32 AM

Hello Mani,
We have planning books used to calculate demand for newspapers at weekends. At weekends the papers contain printed colour magazines. These have to be ordered in advance. The macros that we run use planning start date to claculate the quntity of magazines required for the next weekend. The business also needs to do advanced calculation for the next two weekends. This requires an update to the planning start date to change the basis for the macros. We do not wish to write separate macros for each weekend as there are quite a few of them. We are trying to keep it as simple as possible.
Regards
Peter

Ligthroom 5.5 after installing the software does not start and does not give any kind of mistake

I subscribe to CC as a photographer and just inatalar Ligthroom but this does not start and no daningun mistake. Reinstall several times but still the same. What can be the problem?
thanks

Hola, arreglado por mi parte también, chateando (en inglés...) con un operador que ha demostrado conocer perfectamente la solución (para Win7):
En carpetas "C:\Program files (x86)\Common Files\Adobe\" y "C:\ProgramData\Adobe\" deben activarse permisos de control total para el usuario (que puede no tener control total en el sistema) y desactivar "solo lectura" a las carpetas descritas y sus subcarpetas para que al iniciar se configure el registro adecuadamente. Una vez hecho esto me ha funcionado todo a la primera, me lo han explicado paso a paso por el chat. Un 10 para el técnico, un suspenso para Adobe por no publicar adecuadamente la solución.
Gracias manufoto por tu explicación, parece que todo va a parar a las mismas carpetas.
Saludos

Context server not started - ULOG does not contain any errors

Hello, please, could anyone help us?
If I try to boot server, only folowing processes are started :
exec BBL -A :
process id=296400 ... Started.
Booting server processes ...
exec TMUSREVT -A :
process id=296516 ... Started.
exec TMSYSEVT -A :
process id=296087 ... Started.
exec contextserver -A -e /d2/mimstst/mims_run_t/log/error.log
The last process doesn't finish, no other processes start, in ULOG are only info
about started processes :
ULOG content...
Do you have any idea?

Petr,
There is nothing called "contextserver" that ships as part of Tuxedo. The
servers that started OK are all supplied out of the box with Tuxedo.
You need to get the source to "contextserver" and see what it is doing. I
suspect the problem might be in whatever code it provided as a tpsvrinit() routine.
Regards,
Peter.
Petr wrote:
Hello, please, could anyone help us?
If I try to boot server, only folowing processes are started :
exec BBL -A :
process id=296400 ... Started.
Booting server processes ...
exec TMUSREVT -A :
process id=296516 ... Started.
exec TMSYSEVT -A :
process id=296087 ... Started.
exec contextserver -A -e /d2/mimstst/mims_run_t/log/error.log
The last process doesn't finish, no other processes start, in ULOG are only info
about started processes :
ULOG content...
Do you have any idea?

Hello . Mozilla keyboard shortcuts does not include any window key shortcuts. Please update this content . Thanks

From Mozilla keyboard shortcuts webpage.

In this article: [[Keyboard shortcuts - Perform common Firefox tasks quickly]]?
If the problem is that you are not seeing shortcuts for Mac or Linux, and you are running Windows, then the site did not properly detect your OS. In the left part of the page, look for the EDITING TOOLS bar. If necessary, click it to expand the list of tools. Then you should see a section called CUSTOMIZE THIS ARTICLE where you can change from Mac or Linux to your version of Windows.
If the problem is that there are specific shortcuts missing that you would like to see documented, could you mention which ones they are or which functions they perform?

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

When the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Corresponding table in the source system does not contain any data -URGENT

Hi Guru's,
I have already uploaded master data.
I have created infosource added infoObjects to it and activated it to create communication strucure.
M using RSA1OLD transaction.
and assigned datasource to infosource ie source system name and clicked ok.
save datasource to infosurce assigned msg displayed, clicked ok.
transfer rules r created, i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv
in datatargets tab selected data target as infocube. n then in schedule tab start data load immediately and clicked ok.
everything is fine upto schedule n in monitor it does not display any data.
what will be the problem??

i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv ??
Are you loading the data from flat file or R3? If you are loading it from R3, why are you giving the Flat file name?
In this case, check in RSA3 (R3 side), whther the datas source is getting the value.
In case you are loading a flat file, you need to create a flat file data source and assign to the infosource.
Thanks..
Shambhu

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

HT203167 My iTunes library on laptop is correct/up to date with recent purchases and downloads; however, our desktop computer does not have any of these when logged into Itunes.... how do I add these so both computers have current info?

The iTunes library on our laptop is correct and up to date with recent purchases and downloads; however, our desktop does not have any of these when using it. Home sharing is turned "ON" with both computers. Why is the desktop not showing the same content and how do I resolve this?

From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
Also see this migrate iTunes library post by turingtest2

GA749 start date does not include any senders in FAGLGA35

Similar Messages

Maybe you are looking for