GAAP ETIF 00-21 Multiple Element Arrangements

Does anyone out there have any experience with GAAP invoice and revenue recognition rule EITF 00-21, dealing with Multiple Element Arrangements?
This is the scenario where a contract or sales orders includes support or service that is packaged with a product, therefore customer sees its price as $0; however, when is comes to revenue recognition, vendor needs to account for the revenue according to the typical price for the support or service and percentage of the total contract or sales order.
This would be something that is imlpemented in Advance Pricing, Order Management and AR.
Thanks!!

The problem was that I have 10.10.1 installed, and the system profiler confirms that. I updated on the day of 10.10.1 release. Despite that, I got the above message. However, after uninstalling the previous symantec product as suggested by Eric, I no longer get that message.
I just found out many Yosemite users that have Comcast Xfinity and use the Norton Security Suite provided by Comcast have been having the same problem since upgrading to Yosemite. I checked with Norton today, and they now have provided Comcast with an updated version for Yosemite users [v5.7].
Apparently for all of us who had the Comcast-Norton Security product installed prior to upgrading to Yosemite, you have to uninstall Symantec products as Eric Root so kindly suggested and provided the link for, then reinstall the new product and run the update.

Similar Messages

How to get multiple elements into one element as multiple occurences

I can't figure out how to do this. I have an input message that has multiple elements and I need to take those elements and copy them into one element with each new element going in as a new occurence or instance. For example
I have this input under one parent node.
element1
element2
element3
element4
and this is the output I need
Node
Element1[0]
Element2[1]
Element3[2]
Element4[3]
The input XML looks like this
Payload
Element1
Element2
Element3
and the output XML needs to look like this
Payload
Element.
Thanks in advance

How about this.
Input XML:
<Row>
          <Column1>TOTAL</Column1>
          <Column_9_2_2008>900</Column_9_2_2008>
          <Column_9_2_20082>890</Column_9_2_20082>
          <Column_9_3_2008>52</Column_9_3_2008>
          <Column_9_4_2008>0</Column_9_4_2008>
          <Column_9_4_20082>0</Column_9_4_20082>
          <Column_9_5_2008>0</Column_9_5_2008>
          <Column_9_5_20082>0</Column_9_5_20082>
          <Column_9_8_2008>0</Column_9_8_2008>
          <Column_9_8_20082>0</Column_9_8_20082>
          <Column_9_9_2008>0</Column_9_9_2008>
          <Column_9_9_20082>0</Column_9_9_20082>
          <Column_9_10_2008>0</Column_9_10_2008>
          <Column_9_10_20082>0</Column_9_10_20082>
          <Column_9_11_2008>0</Column_9_11_2008>
          <Column_9_11_20082>0</Column_9_11_20082>
          <Column_9_12_2008>0</Column_9_12_2008>
          <Column_9_12_20082>0</Column_9_12_20082>
          <Column_9_15_2008>0</Column_9_15_2008>
          <Column_9_15_20082>0</Column_9_15_20082>
          <Column_9_16_2008>0</Column_9_16_2008>
          <Column_9_16_20082>0</Column_9_16_20082>
          <Column_9_17_2008>0</Column_9_17_2008>
          <Column_9_17_20082>0</Column_9_17_20082>
          <Column_9_18_2008>0</Column_9_18_2008>
          <Column_9_18_20082>0</Column_9_18_20082>
          <Column_9_19_2008>0</Column_9_19_2008>
          <Column_9_19_20082>0</Column_9_19_20082>
          <Column_9_22_2008>0</Column_9_22_2008>
          <Column_9_22_20082>0</Column_9_22_20082>
          <Column_9_23_2008>0</Column_9_23_2008>
          <Column_9_23_20082>0</Column_9_23_20082>
          <Column_9_24_2008>0</Column_9_24_2008>
          <Column_9_24_20082>0</Column_9_24_20082>
          <Column_9_25_2008>0</Column_9_25_2008>
          <Column_9_25_20082>0</Column_9_25_20082>
          <Column_9_26_2008>0</Column_9_26_2008>
          <Column_9_26_20082>0</Column_9_26_20082>
          <Column_9_29_2008>0</Column_9_29_2008>
          <Column_9_29_20082>0</Column_9_29_20082>
          <Column_9_30_2008>0</Column_9_30_2008>
     </Row>
Output XML:
<Total>
          <Payload>900</Payload>
     </Total>
     <Total>
               <Payload>890</Payload>
     </Total>
     <Total>
               <Payload>52</Payload>
     </Total>

Can I add multiple elements on a single line?

Can I add multiple elements on a single line?

Not yet. But this is something we plan to support. You can vote on this idea here: http://forums.adobe.com/ideas/1046
We use this to help prioritize our work.
Randy

How to link a specific panel with spry multiple element sliding

How to everybody to the forum, I've searched into this forum but maybe this mine is a particular case...
I've a html page with 4 different spry multiple sliding panels, named "primo" "secondo" terzo" "quarto", and all worked fine :-)
When you go to this page the first you can see is "primo" (default).
But the problem/question is this: If i want to send an email link to my page and want to see the "terzo" panel. how???
I've try to search many examples but none one of them meet me.
This is an example of this page called test.html
Many thanks to all wants help me
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Spry Multiple Elements Sliding Sample</title>
<link href="http://labs.adobe.com/technologies/spry/css/samples.css" rel="stylesheet" type="text/css" />
<script src="http://labs.adobe.com/technologies/spry/includes/SpryEffects.js" type="text/javascript" ></script>
<script src="http://labs.adobe.com/technologies/spry/includes/SpryURLUtils.js" type="text/javascript" ></script>
<style type="text/css">
.demoDiv{
height: 150px;
overflow: hidden;
.hiddenElement{
display:none;
/* Fix IE floating bug */
position: absolute;
top: 180px;
</style>
<script type="text/javascript">
var observer = {};
observer.nextEffect = false;
observer.onPostEffect = function(e){
if (this.nextEffect)
var eff = this.nextEffect;
setTimeout(function(){eff.start();}, 10);
this.nextEffect = false;
function pannelli(currentPanel)
    // The list of all the panels that need sliding
var panels = ['slide1', 'slide2', 'slide3', 'slide4'];
var opened = -1;
// Let's check if we have an effect for each of these sliding panels
if (typeof effects == 'undefined')
effects = {};
for (var i=0; i < panels.length; i++)
if (typeof effects[panels[i]] == 'undefined'){
effects[panels[i]] = new Spry.Effect.Blind(panels[i], {from: '0%', to: '100%', toggle: true});
effects[panels[i]].addObserver(observer);
if (effects[panels[i]].direction == Spry.forwards && currentPanel != panels[i])
opened = i;
//prevent too fast clicks on the buttons
if (effects[panels[i]].direction == Spry.backwards && effects[panels[i]].isRunning)
observer.nextEffect = effects[currentPanel];
return;
if (opened != -1)
observer.nextEffect = effects[currentPanel];
effects[panels[opened]].start();
else if (effects[currentPanel].direction != Spry.forwards)
effects[currentPanel].start();
</script>
</head>
<body onload="pannelli('slide1');">
<h3>Spry Multiple elements sliding</h3>
<a href="#" onclick="pannelli('slide1');" value="Slide 1">SLIDE 1</a>
<a href="#" onclick="pannelli('slide2');" value="Slide 2">SLIDE 2</a>
<a href="#" onclick="pannelli('slide3');" value="Slide 3">SLIDE 3</a>
<a href="#" onclick="pannelli('slide4');" value="Slide 4">SLIDE 4</a>
<br />
<div id="slide1" class="hiddenElement">
<div class="demoDiv" style="background-color: yellow;">
<h4>Primo</h4>
Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed
diam nonumy eirmod tempor invidunt ut labore et dolore magna
aliquyam erat, sed diam voluptua. At vero eos et accusam et
justo duo dolores et ea rebum. Stet clita kasd gubergren, no
sea takimata sanctus est Lorem ipsum dolor sit amet.
</div>
</div>
<div id="slide2" class="hiddenElement">
<div class="demoDiv" style="background-color: pink;">
<h4>Secondo</h4>
Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed
diam nonumy eirmod tempor invidunt ut labore et dolore magna
aliquyam erat, sed diam voluptua. At vero eos et accusam et
justo duo dolores et ea rebum. Stet clita kasd gubergren, no
sea takimata sanctus est Lorem ipsum dolor sit amet.
</div>
</div>
<div id="slide3" class="hiddenElement">
<div class="demoDiv" style="background-color: magenta;">
<h4>Terzo</h4>
Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed
diam nonumy eirmod tempor invidunt ut labore et dolore magna
aliquyam erat, sed diam voluptua. At vero eos et accusam et
justo duo dolores et ea rebum. Stet clita kasd gubergren, no
sea takimata sanctus est Lorem ipsum dolor sit amet.
</div>
</div>
<div id="slide4" class="hiddenElement">
<div class="demoDiv" style="background-color: green;">
<h4>Quarto</h4>
Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed
diam nonumy eirmod tempor invidunt ut labore et dolore magna
aliquyam erat, sed diam voluptua. At vero eos et accusam et
justo duo dolores et ea rebum. Stet clita kasd gubergren, no
sea takimata sanctus est Lorem ipsum dolor sit amet.
</div>
</div>
<br />
Test per collegamenti esterni<br /><br />
<a href="test.html?">vai al pannello I°</a> |
<a href="#">vai al pannello II°</a> |
<a href="#">vai al pannello III°</a> |
<a href="#">vai al pannello IV°</a>
</body>
</html>

silemma wrote:
else if (effects[currentPanel].direction != Spry.forwards)
effects[currentPanel].start();
</script>
</head>
<body onload="pannelli('slide1');">
Change the above to
else if (effects[currentPanel].direction != Spry.forwards)
effects[currentPanel].start();
var params = Spry.Utils.getLocationParamsAsObject(); //get the URL parameter
if (params.slide) { // if the slide parameter exists
    var slide = 'slide'+params.slide; // slide = slide+slide parameter
} else { // otherwise
    slide = 'slide1'
</script>
</head>
<body onload="pannelli(slide);"> 
Then when calling the page use the following notation: http://localhost/test/test.html?slide=3 where ?slide=3 is the third slide
I hope this helps.
Ben

Add multiple elements to a tree control at once

I am using a Tree Control to display customer and certificate information. However, adding 500 customer names or certificate numbers to the tree control one at a time takes for ever (well, 30000 ms). Is there any way to add multiple elements to a tree all at once, or is the only solution to use a listbox with 'forward' and 'back' buttons ?
thanks,
michael

Hi Michael
I don’t believe there is a way to supply a list of child items to a parent item, they have to be added incrementally. One way that you could speed this process up is to design your code such that only when you expand an item does it add the child items.
If you want an even higher update rate have a look at using the ActiveX TreeView control, you will find an example called Family Tree.vi in the LV examples.
I'll do up some code that makes using both of the controls more efficient if enough people want it.
Kurt Friday
www.sciware.com.au

Filter on multiple elements

Hi,
I have a message broker channel and I have processes subscribing to that channel. I was wondering if there was anyway I could have the subscribing processes filter on multiple elements of an XML document? For example, if the xml looked like this:
<aaa>
<bbb>bbb</bbb>
<ccc>ccc</ccc>
</aaa>
Now I want the process to only accept messages where element <bbb> = "bbb" && <ccc> = "ccc". Is there any way to do this? I looked and I couldn't find a way, I was hoping maybe someone could either tell me yes or no.
Thanks for you help.

Hello,
if I remember correctly, the filter can be any valid XPath statement, which returns either true or false. You can always switch to the source view and edit the filter statement manually.
-Kai

EText - Multiple elements in the same record

I was wondering if it is possible to put multiple elements within a single record using eText. For example
<SELECTION>
<CRITERIA>
<INVOICE>INV_NUM1</INVOICE>
<INVOICE>INV_NUM2</INVOICE>
<INVOICE>INV_NUM3</INVOICE>
<INVOICE>INV_NUM4</INVOICE>
</CRITERIA>
</SELECTION>
Produces the following output
INV_NUM1 INV_NUM2 INV_NUM3
INV_NUM4

<NEW RECORD>     FILE_HEADER
1     25     Alpha     R, ‘ ‘     Invoice[1] || Invoice[3]|| Invoice_number
26     25     Alpha     R, ‘ ‘     Invoice[2]
51     25     Alpha     R, ‘ ‘     Invoice[3]
You are in the record FILE_HEADER and at level <LEVEL>     Invoice.
so any element is accessible under or above is available , like above Invoice_number is accessible if that is available under <INVOICE>

Design multiple elements in the same row

hi,
i am new to web dynpro java. how to design multiple elements in the same row. ie a textfield and inputfield in the same row in form design layout.
thanx

Hi Viral Patel,
To design multiple elements in the same row. Follow below Steps
1.) Open your View --> Select Layout Tab --> In the Outline Explorer --> There will be a Default " RootUIElementContainer " --> Select it --> Right Click & Select Insert Child Option --> A new Window appears --> Select TransparenContainer & Press Finish --> Now Select TransparentContainer --> Right Click & Select Insert Child Option --> Add TextView and Press Finish --> Similarly add InputField to the newly added TransparentContainer.
---> Now to add above two UI Elements in the same row in form design layout --> Select Newly added TransparentContainer --> In the Properties Change layout Property to GridLayout & set colCount --> 2 .
It will make the above two UI Elements in the same Row
With Regards,
Roop Kumar.

Using an array to show/hide multiple elements?

I have two elements that need to be hidden:
"mov-imp"
"mov-pim"
Currently, I am doing this:
var arr = ["mov-imp", "mov-pim"];
// This is the onclick function
sym.$.each(arr, function(){
                    $(this).hide();
What's the best way to show/hide multiple elements/symbols in AE?
Thanks!

Hi Ashish, here is how you can hide all symbols in an array on button click. I'm not sure what you're asking in your second post, if you can clarify that.
Example:
www.timjaramillo.com/code/edge/arrays_hide_objects
Source:
www.timjaramillo.com/code/edge/_source/arrays_hide_objects.zip
Code on button.click event:
// if this button stays at root, you can just call sym.hideObjects();
// this is in case you nest your button inside other symbols
sym.getComposition().getStage().hideObjects();
Code on Stage.compositionReady:
var arr = ["obj1", "obj2"];
sym.hideObjects = function(){
          $.each(arr, function(index, value) {
                    sym.$(value).hide();

How do I search and return multiple elements of array quickly (like Matlab find)?

Hi, I am a fairly experienced Labview programmer, and I have always wondered if there is a way to quickly search arrays for multiple elements that meet a selection criteria, equivalent to the Matlab find command. While my inability to do this in Labview has always bugged me, I now have an application that requires this ability and I need to find a solution.
The fastest way that I have found to do this in labview is to perform comparisons on vectors of data, and then use the resulting Boolean vector to parse the array using a for loop and shift registers. I have attached a vi snippet of a benchmarking vi for one of the simple searches I need to do. On my laptop this search takes about 600ms. In comparison, the equivalent in Matlab:
newArray=oldArray(find(oldArray(:,4)./oldArray(:,2)>1.5),;
executes in about 1.2ms. So, the way that I am doing this in Labview is only 400 times slower
Needless to say, I need to do these types of searches many many times, and those 599 extra ms start to add up pretty quickly!
Thanks for your help,
Aaron
Solved!
Go to Solution.
Attachments:
benchmarkSearch.png ‏641 KB

Hi Aaron,
the slowest part is probably the "build array" node in the loop.
Try this:
Define an array of same size as input data (or simply use a copy of it) and wire that to the shift register. Keep a counter of found rows in the loop. Use IndexArray and ReplaceArraySubset in the loop to move the found rows to beginning of array (overwrite "bad" rows). After the loop simply ReshapeArray to the number of found rows...
Sorry, don't have LV(2009) at hand to edit your snippet.
Message Edited by GerdW on 11-20-2009 08:27 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Add multiple elements in response using rules

All,
I am very interested to know if anyone can tell me how I can add multiple elements in the response using the rules engine in oracle SOA 11g (version 11.1.1.3).
For every rule that fires I want to add a complex element named Rule which contains the elements code and description of the rule fired. This information should be returned in the response.
I hope somebody has the answer.
Many Thanks
Ren

All,
Please see below forum for an answer:
Re: Unbounded element in Business Rules
Regards,
Ren

Attaching Multiple Elements to Same Path

Greetings Friends,
Can someone please tell me if (how) I can attach multiple elements (text) to the same path.
I.E. I have 4 "headings" I want to display around a single ellipse.
Thank you so much!

Unless each heading is contained in a single line of text, there is no way to do it. You'll need to clone the path three times and attach the text seperately to each.

How to update multiple elements in xml?

Hi!
I've a input xml containing Sales Order information.
The xml-file has a Header and multiple detail records
e.g.
<NS3:header>
+ <NS3:detail>
+ <NS3:detail>
+ <NS3:detail>
+ <NS3:detail>
+ <NS3:detail>
+ <NS3:detail>
+ <NS3:detail>
</NS3:header>
In each detail node, I want to control if requestedDate is a working day and change date if it's not correct
e.g.
<NS3:detail>
-<NS3:product>
-<NS3:item>
<NS3:itemProduct>222288
</NS3:itemProduct>
</NS3:item>
</NS3:product>
<NS3:quantityOrdered>2
</NS3:quantityOrdered>
-<NS3:processing>
<NS3:actionType>A
</NS3:actionType>
</NS3:processing>
<NS3:dateRequested>2012-03-03T13:17:48.439+01:00
</NS3:dateRequested>
</NS3:detail>
In this example is <NS3:dateRequested>2012-03-03T13:17:48.439+01:00</NS3:dateRequested> a Saturday and this element should be updated with the new date for Monday <NS3:dateRequested>2012-03-05T13:17:48.439+01:00</NS3:dateRequested>
The new date is fetched from a Web Service I invoke for each detail record.
I can read each node and get the element for each dateRequested in a while loop by using XPATH as following:
<scope name="Scope_1">
<sequence name="Sequence_2">
<assign name="Assign_3">
<copy>
<from expression="ora:countNodes('inputVariable','payload','/ns1:processSalesOrderElement/ns1:header/ns1:detail')"/>
<to variable="Count"/>
</copy>
<copy>
<from expression="1"/>
<to variable="varindex"/>
</copy>
</assign>
<while name="While_1"
condition="bpws:getVariableData('varindex')<bpws:getVariableData('Count')">
<sequence name="Sequence_1">
<assign name="Assign_6">
<copy>
<from expression="ora:getElement('inputVariable','payload','/ns1:processSalesOrderElement/ns1:header/ns1:detail',bpws:getVariableData('varindex'))"/>
<to variable="outputVariable" part="payload"
query="/ns1:processSalesOrderElement/ns1:header/ns1:detail"/>
</copy>
</assign>
<assign name="Assign_4">
<copy>
<from expression="ora:getElement('inputVariable','payload','/ns1:processSalesOrderElement/ns1:header/ns1:detail/ns1:dateRequested',bpws:getVariableData('varindex'))"/>
<to variable="outputVariable" part="payload"
query="/ns1:processSalesOrderElement/ns1:header/ns1:detail/ns1:dateRequested"/>
</copy>
</assign>
<assign name="Assign_1">
<copy>
<from expression="bpws:getVariableData('varindex') + 1"/>
<to variable="varindex"/>
</copy>
<copy>
<from variable="inputVariable" part="payload"
query="/ns1:processSalesOrderElement/ns1:header/ns1:businessUnit"/>
<to variable="Invoke_1_startSecureCustomerRequestDate_InputVariable"
part="parameters"
query="/ns5:startSecureCustomerRequestDateElement/ns5:businessUnit"/>
</copy>
<copy>
<from variable="outputVariable" part="payload"
query="/ns1:processSalesOrderElement/ns1:header/ns1:detail/ns1:dateRequested"/>
<to variable="Invoke_1_startSecureCustomerRequestDate_InputVariable"
part="parameters"
query="/ns5:startSecureCustomerRequestDateElement/ns5:jdDateRequestedJulian_DRQJ"/>
</copy>
</assign>
<invoke name="Invoke_1"
partnerLink="BT_SecureCustomerRequestDateManager"
portType="ns4:Oracle_E1_SBF_SEI_PkgBldFile_BT_SecureCustomerRequestDateManager"
operation="startSecureCustomerRequestDate"
inputVariable="Invoke_1_startSecureCustomerRequestDate_InputVariable"
outputVariable="Invoke_1_startSecureCustomerRequestDate_OutputVariable"/>
<scope name="Scope_2">
<sequence name="Sequence_3">
<assign name="Assign_5">
<copy>
<from variable="Invoke_1_startSecureCustomerRequestDate_OutputVariable"
part="result"
query="/ns5:startSecureCustomerRequestDateResponseElement/ns5:jdDateRequestedJulian_DRQJ"/>
<to variable="outputVariable" part="payload"
query="/ns1:processSalesOrderElement/ns1:header/ns1:dateRequested"/>
</copy>
</assign>
</sequence>
</scope>
</sequence>
</while>
My problem is how to update the date for each detail record back to my InputVariable.
There is no XPATH function like updateElement or changeElement?!?
I will use the information from InputVariable with the manipulated dateRequested later on to Invoke WS to create Sales Order in a target system.
Thanks,
Niklas

Hi Niklas,
have you considered also moving from assign activities to transformations?
e.g. (in a loop)
1. using an XSLT to prepare data for the 'BT_SecureCustomerRequestDateManager'
-- input document ... from 'inputVariable'
-- input parameter ... from 'varindex'
-- output ................ to 'Invoke_1_startSecureCustomerRequestDate_InputVariable'
2. invoking 'BT_SecureCustomerRequestDateManager'
3. using an XSLT to modify 'inputVariable'
-- input document ... from 'inputVariable'
-- input parameter ... from 'varindex'
-- input parameter ... output from 'BT_SecureCustomerRequestDateManager'
-- output ................ to 'inputVariable'
Then you will not need to create custom Java program (code). It is easy to do the logic/modification inside of an XSLT.
Also BPEL process code will be easier to read.
Regards,
Martin.

Counter function value to multiple elements as same value in different node

I need your help!
I have a counter function and value of that needs to be passed to two elements of Node A and Sub Node B..
Ex: Mapping
Map Counter function to NodeA.Element1 and also to NodeB(subnode).Element2
Expected Result:
NodA.Element1 = 1
NodeB.Element2 =1
but I am getting the result as
NodA.Element1 = 1
NodeB.Element2 =2
I understand the reason.. since the counter function is called each time..
so my questions is how do I the expected result as mentioned--
NodA.Element1 = 1
NodeB.Element2 =1
remember the XML is multiple occurence(1.. unbounded for both the nodes)
Thanks-Gopal

I think I did not explain phrase it correctly..Technicallyh NodeA.Element1 value should be copied to NodeB.Element2..As long as I can generate counter to NodeA.Element1 and hold the value somewhere to copy to NodeB.Element2, that would be fine..
the above suggestion you guys made would not work as it will create two different set of sequences.. however Index suggestion might work differently but still I might go out of sequence if I have multiple detail record for each master record..
Here the expected output (concise)
Record 1 - NodeA.Element1 = 1
Record 2 -NodeB.Element2=1
Record3- NodeA.Element1 =2
Record4 - NodeB.Element2=2 -->two detail records
Record5 - NodeB.Element2=2 --> two detail records
please help

Transformation from multiple elements to multiple instances of same element

I have to do a transformation where some elements in the source side has to be mapped into multiple instances of an element which has name-value pair elements.
For example source has
element1
element2
element3
element4
Target has
elementspecgroup (0--infinity cardinality)
element-name
element-value
so the mapping will be multiple instances of elementspecgroup
elementspecgroup
ist instance: "element1"
value of element1
2nd instance: "element2"
value of element1
and so on.
Can somebody please give me a hint how to achieve it.
Thanks.

can you show me source-payload and target-payload?

GAAP ETIF 00-21 Multiple Element Arrangements

Similar Messages

Maybe you are looking for