Gaim suddenly not starting? [SOLVED]

I used to be using sim but I (luckily) switched back to gaim just a moment ago. However, I started it, logged in and used the chat but forgot I can't close the buddy list window and it shutted down. Hey, no biggie! I run the command again but no respond. Ok, I've had my machine up for 48 hours maybie it's time for a reboot. I rebbot but no, gaim is still not working. I made no changes what so ever after fetching gaim. This really makes no sense to me. What can cause this?
/Richard

Well if I knew anything at all I'd post it. It's just that nothing happens when I launch the program. I also don't know what cli is nor where to find my log files for command output (or whatever log I should read).
[EDIT]
BTW. The systray-plugin, is that for X (Xfce4) or for the actual program (gaim)?
I just noticed. I didn't try to launch it from the terminal :oops: , only the mini-command-line and the desktop menu. I was missing libXss, so I just installed it and it's working fine. However, I don't understand how it can work when I first launch it and then just suddenly stop working. Why did the file get removed?
Thanks for the help anyways.
/Richard
[/EDIT]

Similar Messages

Latest thundervbird update will not start [SOLVED]

Thunderbird 31.01 will not run on either of my computers. The error is:
$ thunderbird
XPCOMGlueLoad error for file /usr/lib/thunderbird/libxul.so:
/usr/lib/thunderbird/libsmime3.so: version `NSS_3.16' not found (required by /usr/lib/thunderbird/libxul.so)
Couldn't load XPCOM.
I confirm that nss is 3.16.3-1
Can anyone say what is the problem?
Thanks
Andrew
Last edited by fdservices (2014-08-11 07:12:53)

OK, I admit it, I am confused.
I just updated again to install Thunderbird 31.0-1 and now it is working for me. But I do not know why:
$ ls lib*
libfreebl3.chk libldap60.so libmozalloc.so libnspr4.so libnssckbi.so libnssdbm3.so libplc4.so libprldap60.so libsoftokn3.chk libssl3.so
libfreebl3.so libldif60.so libmozsqlite3.so libnss3.so libnssdbm3.chk libnssutil3.so libplds4.so libsmime3.so libsoftokn3.so libxul.so
$ ldd /usr/lib/thunderbird/libxul.so
libsmime3.so => /usr/lib/libsmime3.so (0x00007fc3febf9000)
Here are the packages updated today:
belle-sip
cmake
kdelibs
lib32-libcups
lib32-openssl
lib32-util-linux
libx264
mencoder
mplayer
openssl
polarssl
qscintilla
swt
thunderbird
thunderbird-i18n-en-gb
thunderbird-i18n-fr
x264
None of which should have changed anything I would have thought.
pacman -Qo /usr/lib/thunderbird/lib*
error: No package owns /usr/lib/thunderbird/libfreebl3.chk
error: No package owns /usr/lib/thunderbird/libfreebl3.so
/usr/lib/thunderbird/libldap60.so is owned by thunderbird 31.0-1
/usr/lib/thunderbird/libldif60.so is owned by thunderbird 31.0-1
/usr/lib/thunderbird/libmozalloc.so is owned by thunderbird 31.0-1
error: No package owns /usr/lib/thunderbird/libmozsqlite3.so
error: No package owns /usr/lib/thunderbird/libnspr4.so
error: No package owns /usr/lib/thunderbird/libnss3.so
error: No package owns /usr/lib/thunderbird/libnssckbi.so
error: No package owns /usr/lib/thunderbird/libnssdbm3.chk
error: No package owns /usr/lib/thunderbird/libnssdbm3.so
error: No package owns /usr/lib/thunderbird/libnssutil3.so
error: No package owns /usr/lib/thunderbird/libplc4.so
error: No package owns /usr/lib/thunderbird/libplds4.so
/usr/lib/thunderbird/libprldap60.so is owned by thunderbird 31.0-1
error: No package owns /usr/lib/thunderbird/libsmime3.so
error: No package owns /usr/lib/thunderbird/libsoftokn3.chk
error: No package owns /usr/lib/thunderbird/libsoftokn3.so
error: No package owns /usr/lib/thunderbird/libssl3.so
/usr/lib/thunderbird/libxul.so is owned by thunderbird 31.0-1
suggests that the extra lib packages were left over from the upgrade.
I cannot say why the links were incorrectly updated before. All very strange.
Thanks for the help
Andrew

Laptop not starting

My laptop is suddenly not starting,,I used it 2 days ago,Then it was alright.but now it is not starting up... Power button shows light.bluetooth button also shows a red light.Caps lock button shows blue light off & on .. Monitor shows nothing.there is no sound,no air is coming out.. help me.. please

Hi @PraptyParmita ,
Welcome to the HP Forums!
It is a fantastic place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I grasp that your notebook was working OK a few days ago but now it will not boot up. The power button lights up, the Bluetooth light is red and the Caps lock button shows blue light flashing on and off. You do not have any air movement from the fan.
Here are three links that may help determine the cause.
Troubleshooting an Overheating and Auto Shutdown Issue
HP Notebook PCs - Reducing Heat Inside the PC to Prevent Overheating
HP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Suddenly laptop off and not start up again

laptop stopped/ off suddenly and ON again with black/off screen, fan and all LED remains ON including charging LED when i force off it and trying to ON it by pressing the power button, fan
start sound comes in then nothing displays on
screen. It shows light in all LED. I also trying by removing battery but doesn't work..... need help

Hi there @dev0101
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that your notebook is not starting properly, and I am happy to help with this. Please post the full product number for your notebook, as the partial number you posted result in three very different models. See the following, if you need help with that information.
How Do I Find My Model Number or Product Number?
However as a start you can try this page and see if anything clicks for you:
HP Notebook PCs - Computer Does not Start (Windows 7, Vista, XP)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Help! My MacBook is all of a sudden not working. I can login to my account but as soon as I do that the screen goes completely white. I can change the volume and I have a mouse but that is it. I've tried safe starting my computer and that doesn't work.

Help! My MacBook is all of a sudden not working past the login page. A white screen comes up that I cannot get rid of. I attempted a safe start up and that failed as well. It's a white screen where I have a mouse and when I click the volume buttons I can hear it working but nothing else just white. Please help.

Something you can try is resetting it all Settings > General > Reset > Reset all settings. Or go to Settings > Store & sign out & log back in. Another thing you can do is restore your ipod. This has happened to me but the only thing i did was that i created a new account but try doing the things above i just told you. :)

Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday. I shut my iPad down and still no luck.

Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday, and I have already tried shutting off my iPad.

[NOT SOLVED] Gnome will not start

I'm editing this original message by way of summing up so that anyone coming here with a similar problem will know what to expect if they read further:
I believe the reason Gnome would not start on the machine in question was that it made too many demands on the available hardware (see desm0te's comments below).
For this reason I decided to switch to LXDE as Desktop Environment which works well on the restricted hardware. I did not investigate the Gnome related problem any further.
The original message follows:
After a successful installation of the basic command-line Arch according to the Beginner's Guide, I went on to install Gnome according to instructions in the Wiki.
I Did not want Gnome to start automatically but only when I type in the command startx.
This it does, but all I get is the nice blue "curtain" background - no black bar at top of screen with Actions, date , name etc...
and no cursor.
One funny thing was - this afternoon while I was concentrating on another machine - the black bar suddenly appeared (apparently for no reason) showing the date and my name but with the X cursor
from the X11 environment. However as soon as I moved this cursor to the bar and clicked, both dursor and bar disappeared never to return .
I decided to redirect the stderr of startx to a file in the hope that it would give a clue as to what was wrong.
X.Org X Server 1.11.4
Release Date: 2012-01-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.2-1-ARCH i686
Current Operating System: Linux pdv 3.2.2-1-ARCH #1 SMP PREEMPT Thu Jan 26 08:28:27 UTC 2012 i686
Kernel command line: root=/dev/sda1 ro vga=773
Build Date: 29 January 2012 03:41:53PM
Current version of pixman: 0.24.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 3 21:13:19 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
[10f] 320 x 200, 70Hz
[134] 320 x 240, 72Hz
[144] 400 x 300, 72Hz
[154] 512 x 384, 70Hz
[11e] 640 x 400, 70Hz
[112] 640 x 480, 60Hz, 75Hz, 85Hz, 100Hz, 160Hz
[115] 800 x 600, 60Hz, 75Hz, 85Hz
[118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz, 130Hz
[17b] 1280 x 768, 60Hz
[16a] 1280 x 960, 60Hz, 85Hz
[11b] 1280 x 1024, 60Hz, 75Hz, 85Hz, 100Hz
[13e] 1400 x 1050, 60Hz, 75Hz
[124] 1600 x 1200, 60Hz
(gnome-shell:770): Clutter-CRITICAL **: Unable to initialize Clutter: Unable to find suitable fbconfig for the GLX context: Failed to find any compatible fbconfigs
Window manager error: Unable to initialize Clutter.
Failed to play sound: File or data not found
Tracker-Message: Setting up monitor for changes to config file:'/home/dick/.config/tracker/tracker-miner-fs.cf** Message: applet now removed from the notification area
(nm-applet:789): libnotify-WARNING **: Failed to connect to proxy
** (nm-applet:789): WARNING **: get_all_cb: couldn't retrieve system settings properties: (25) Launch helper exited with unknown return code 1.
** (nm-applet:789): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
** (nm-applet:789): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
Tracker-Message: Setting up monitor for changes to config file:'/home/dick/.config/tracker/tracker-store.cfg'
(tracker-store:791): Tracker-CRITICAL **: D-Bus service name:'org.freedesktop.Tracker1' is already taken, perhaps the daemon is already running?
(tracker-miner-fs:788): Tracker-CRITICAL **: Empty locale file found at '/home/dick/.cache/tracker/miner-applications-locale.txt'
(gnome-settings-daemon:668): color-plugin-WARNING **: failed to get edid: unable to get EDID for output
(tracker-miner-fs:788): Tracker-WARNING **: Couldn't properly parse desktop file 'file:///usr/share/applications/brasero-nautilus.desktop': 'Desktop file doesn't contain type'
(tracker-miner-fs:788): Tracker-CRITICAL **: Empty locale file found at '/home/dick/.cache/tracker/miner-applications-locale.txt'
xinit: connection to X server lost
waiting for X server to shut down gnome-session[655]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
Server terminated successfully (0). Closing log file.
(tracker-miner-fs:788): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
(tracker-miner-fs:788): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
(tracker-miner-fs:788): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
(tracker-miner-fs:788): GVFS-RemoteVolumeMonitor-WARNING **: cannot remove match rule 'type='signal',interface='org.gtk.Private.RemoteVolumeMonitor',sender='org.gtk.Private.GduVolumeMonitor',': org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(tracker-miner-fs:788): GVFS-RemoteVolumeMonitor-WARNING **: cannot remove match rule 'type='signal',interface='org.freedesktop.DBus',member='NameOwnerChanged',arg0='org.gtk.Private.GduVolumeMonitor'': org.freedesktop.DBus.Error.Disconnected: Connection is closed
xinit: unexpected signal 2
If this gives clues could someone please point me in the right direction? Are the two EE messages significant (Failed to load modules "vesa" and "fbdev"). What is Clutter*? What should I do to get it initialized?
Thanks for any help.
Dick Summerfield (aka Battus).
* Sorry about that - it's an open source graphics library for creating hardware-accelerated user interfaces - but am I any the wiser for that
Last edited by Battus (2012-02-21 19:48:23)

desm0tes:
To take your points one by one:
1. I am now quite happy with LXDE too. The problems I mentioned last night seem to have gone (???!!!) and I can just start LXDE from my user account. Maybe later, I'll realize what I was doing wrong or rather what I did to make it work... . Now I just type:
startx
having put:
exec ck-launch-session startlxde
in .xinitrc.
2. Thanks for the tip about yaourt. I shall try that sooner or later.
3. Well as I said - I don't understand what I was doing wrong - which makes me feel a bit stupid and is rather annoying but looking on the bright side it's fine to be able to start-up, have a legible screen and logout successfully - which I couln't do before. I now have to figure out how to expand the contents of LXDE a bit but that's the fun of it!
LXDE starts up nicely with minimal possibilties but I can change look & feel and customize the panel settings.
"Menu" contains:
Accessories:
File Manager
Image Viewer
LXTerminal
Leafpad
Xarchiver
Internet:
Avahi SSH Server Browser
Avahi VNC Server Browser
Office:
ePDFViewer
System Tools:
Avahi Zerconf Browser
Task Manager
Preferences:
Customize Look and Feel
Monitor Settings
OPenbox Configuration Maanger
Preferred Applications
Run
Logout
All of these start up OK and work, on cursory examination, except the Avahi Browsers which I don't understand and which appear to do nothing as no window appears on screen.
4. I'm not quite sure I can yet see the use of a login manager such as SLiM, since I seem to get on quite nicely without it but since I've heard it mentioned a lot I'm sure I'm just missing the point.
Dick Summerfield (aka Battus)
Last edited by Battus (2012-02-06 19:56:30)

When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?

Hi all,
I need help with my iphone4s.
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?
What seems to be the problem here?
thanks and regards
Wan

Wanlucg wrote:
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

UME Service suddenly stopped and now does not start

Hello experts, a weird problem has come up to my attention. A few days ago our Enterprise Portal suddenly went down and when we restarted all services, the UME Service did not start. We tried restarting the whole server, to no avail. This service just won't start. We are using EP 7 and our UME is configured to take ABAP as data source.
Looking at one of the logs (security.log) I found the following interesting errors:
#1.5 #0012799E98F6002100000000000027250004456D687024B5#1202236112773#/System/Security/Usermanagement##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_48##0#0#Error#1#com.sap.security.core.persistence#Java#User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: "". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "".##User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: "". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "".#2#Name or password is incorrect (repeat logon)#{
passwd=********
lang=EN
receiverid=master
sysnr=00
client=500
poolmaxsize=10
user=SAPJSF
receiverid_guest=master
ashost=10.1.2.42
poolmaxwait=10000
#1.5 #0012799E98F6002100000003000027250004456D68702DA9#1202236112775#/System/Security/Usermanagement##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_48##0#0#Error#1#com.sap.security.core.persistence#Java#An exception was thrown in the UME/ABAP user management connector that was caused by unavailability of the RFC communication with the backend system: "". ##An exception was thrown in the UME/ABAP user management connector that was caused by unavailability of the RFC communication with the backend system: "". #1#Name or password is incorrect (repeat logon)#
#1.5 #0012799E98F6002100000005000027250004456D68702ECA#1202236112776#/System/Security/Usermanagement##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_48##0#0#Fatal#1#com.sap.security.core.persistence#Java#Initialization of ABAP data source () failed: "". This message is critical if it appears during the startup of the AS Java.##Initialization of ABAP data source () failed: "". This message is critical if it appears during the startup of the AS Java.#2#com.sap.security.core.persistence.datasource.imp.R3Persistence#Name or password is incorrect (repeat logon)#
#1.5 #0012799E98F600210000000A000027250004456D68703B33#1202236112779#/System/Security/Usermanagement##com.sap.security.core.server.ume.service.UMEServiceFrame#######SAPEngine_System_Thread[impl:5]_48##0#0#Fatal#1#com.sap.security.core.server.ume.service.UMEServiceFrame#Plain#Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Name or password is incorrect (repeat logon)###
This errors also appear on the trace file.
Any suggestions? If you need any other info, please let me know.
Regards.

I can log on to the backend system (ABAP) with any user.
I will include the last lines from DefaultTrace#.trc:
#1.5 #0012799E98F600230000000800006AF70004456F971D4B4C#1202245485807#com.sap.security.core.server.ume.service.UMEServiceFrame##com.sap.security.core.server.ume.service.UMEServiceFrame.start()#######SAPEngine_System_Thread[impl:5]_122##0#0#Error##Plain###com.sap.security.core.persistence.datasource.PersistenceException: Name or password is incorrect (repeat logon)#
#1.5 #0012799E98F600230000000900006AF70004456F971D4BC5#1202245485807#com.sap.security.core.server.ume.service.UMEServiceFrame##com.sap.security.core.server.ume.service.UMEServiceFrame.start()#######SAPEngine_System_Thread[impl:5]_122##0#0#Error##Plain###com.sap.security.core.persistence.datasource.PersistenceException: Name or password is incorrect (repeat logon)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:234)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:489)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:444)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
caused by -
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)
     at com.sap.security.core.persistence.datasource.imp.r3persistence.R3JCo640Proxy$Client640.getAttributes(R3JCo640Proxy.java:490)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.doInitRfc(R3PersistenceBase.java:732)
     at com.sap.security.core.persistence.datasource.imp.R3Persistence.localInitialization(R3Persistence.java:277)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:466)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:444)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
#1.5 #0012799E98F600230000000B00006AF70004456F971D4E02#1202245485808#com.sap.security.core.server.ume.service.UMEServiceFrame##com.sap.security.core.server.ume.service.UMEServiceFrame#######SAPEngine_System_Thread[impl:5]_122##0#0#Fatal#1#/System/Security/Usermanagement#Plain#Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Name or password is incorrect (repeat logon)###
#1.5 #0012799E98F600230000000D00006AF70004456F971D63C5#1202245485814#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_122##0#0#Error#1#/System/Server#Plain###Service com.sap.security.core.ume.service error. Nested exception is: com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Name or password is incorrect (repeat logon)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Name or password is incorrect (repeat logon)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:234)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:489)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:444)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
#1.5 #0012799E98F600230000000F00006AF70004456F971D6668#1202245485814#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_122##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Name or password is incorrect (repeat logon)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Name or password is incorrect (repeat logon)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:234)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:489)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:444)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
#1.5 #0012799E98F600230000001100006AF70004456F971D6861#1202245485815#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_122##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#

I'm trying to sync a new i phone to i tunes. I get message that says cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

I'm trying to sync a new iphone into i tunes. I'm getting a message that says that this iphone cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

See Here...
AMDS for Windows
http://support.apple.com/kb/TS1567
AMDS for Mac
http://support.apple.com/kb/ht1747

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

here is link to the apple product feedback website:
http://www.apple.com/feedback/

When connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

when connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

[Solved]Laptop does not start (not even bios)

Hi all,
I was about to install archlinux on my laptop. When I generate partitions (I used GPT), I saw something like this:
"If you have a BIOS motherboard (or plan on booting in BIOS compatibility mode) and you want to setup GRUB on a GPT-partitioned drive, you will need to create an extra BIOS Boot Partition of size 1 or 2 MiB and EF02 type code. Syslinux does not need one."
So, I was planning to make this. When I run cgdisk, I was that lthere was a 1007kb unusued(?) space. So I thought I can use this space for boot sector. Then I changed its type to EF02. When I did this, my laptop shutted down quickly and does not start again. When I press the power up button; I hear the usual starting noise, and then it shuts down again.
What did I do to my laptop?
What I tried:
Remove battery, wait for 5 minutes, try again
Remove hdd, try again
Unplug&plug bios battery, try again
Edit: Solved with a shame. Wall-charger was unplugged. This topic can be removed.
Last edited by firatakandere (2013-12-24 17:09:56)

firatakandere wrote:Wall-charger was unplugged. This topic can be removed.
Why? Others may learn for your experience
Welcome to Arch Linux.

[SOLVED] CUPS does not start

I don't know if this issue is a bug or if I'am doing something terribly wrong.
I've installed ArchLinux without GUI, just base, as a pure printserver a few weeks ago with only cups running and it worked.
But when I try to do exactly the same installation again on same PC (tried IPFire meanwhile) it is a mess!
First CUPS suddenly needs avahi to be running (enabled).
Without it, I get a 'core-dump' error:
systemd-coredump[###]: Process 255 (cupsd) dumped core.
systemd[1]: cups.service: main process exited, code=dumped, status=6/ABRT
Next cups does not start, does not offer shared printers and is not accessible through web interface until I start it manually.
Than everything works as supposed.
On reboot: same procedure!
Of course I edited 'cupsd.conf' on the server, added
Listen *:631
and
Allow from 192.168.XXX.XXX/24
to all <Loaction> entries.
Though I enabled cups (which in fact only enables the cups.socket) I do not get it to work.
So it seems to be a problem with this non reacting cups.socket, perhaps?
BTW: sshd.socket works.
There are no errors which I could post.
I've also reinstalled serveral times...
PS:
Menawhile I found a workaround:
# systemctl disable cups
# sudo ln -s '/usr/lib/systemd/system/cups.service' '/etc/systemd/system/multi-user.target.wants/cups.service'
but I still wonder, why the intitial configuration which worked till a few days suddenly stopped working...
Last edited by renegat (2013-02-27 14:28:14)

renegat wrote:
I don't know if this issue is a bug or if I'am doing something terribly wrong.
I've installed ArchLinux without GUI, just base, as a pure printserver a few weeks ago with only cups running and it worked.
But when I try to do exactly the same installation again on same PC (tried IPFire meanwhile) it is a mess!
First CUPS suddenly needs avahi to be running (enabled).
Without it, I get a 'core-dump' error:
systemd-coredump[###]: Process 255 (cupsd) dumped core.
systemd[1]: cups.service: main process exited, code=dumped, status=6/ABRT
Next cups does not start, does not offer shared printers and is not accessible through web interface until I start it manually.
Than everything works as supposed.
On reboot: same procedure!
Of course I edited 'cupsd.conf' on the server, added
Listen *:631
and
Allow from 192.168.XXX.XXX/24
to all <Loaction> entries.
Though I enabled cups (which in fact only enables the cups.socket) I do not get it to work.
So it seems to be a problem with this non reacting cups.socket, perhaps?
BTW: sshd.socket works.
There are no errors which I could post.
I've also reinstalled serveral times...
PS:
Menawhile I found a workaround:
# systemctl disable cups
# sudo ln -s '/usr/lib/systemd/system/cups.service' '/etc/systemd/system/multi-user.target.wants/cups.service'
but I still wonder, why the intitial configuration which worked till a few days suddenly stopped working...
Using the .socket will activate cups on access. Which is much better than keeping it running all the time. Unless you want it running all the time.. Up to you.
I'm curious what your cups.service acutally looks like.. since you shouldn't be having to make a symlink manually.. That's what systemctl enable is for, as you probably know. And why not paste the socket too while you're at it.. Mine are at the bottom of this reply. I also added the cups.path so you can compare and see if anything went wrong there.. Mine works great on 3.7.9-1 kernel.
I'm not sure why you're linking cups.service to multi-user.target.wants/ but it should be WantedBy=printer.target.. Have a look below.
* enabling cups.service should create symlinks for the service unit and the path
* enabling cups.socket should only create the symlink for the socket.
╰─╼ cat cups.socket
[Unit]
Description=CUPS Printing Service Sockets
[Socket]
ListenStream=/var/run/cups/cups.sock
[Install]
WantedBy=sockets.target
╰─╼ cat cups.service
[Unit]
Description=CUPS Printing Service
[Service]
ExecStart=/usr/sbin/cupsd -f
PrivateTmp=true
[Install]
Also=cups.socket cups.path
WantedBy=printer.target
╰─╼ cat cups.path
[Unit]
Description=CUPS Printer Service Spool
[Path]
PathExistsGlob=/var/spool/cups/d*
[Install]
WantedBy=multi-user.target

Gaim suddenly not starting? [SOLVED]

Similar Messages

Maybe you are looking for