Galaxy S3 with GPS signal working sparingly since update

Since the Kit Kat update, the GPS on my S3 works about 10% of the time.  Looking for some answers.  Thanks.

Read somewhere that Google Play App "Network Signal Refresher Lite" will help. Loaded and it seems to have boosted bar by 1 for me.
Description
Refresh network signal in one click!!
IMPORTANT: NETWORK SIGNAL CANNOT BE BOOSTED, ONLY RECOVERED/REFRESHED.
THIS APP TRIES TO SET YOUR DEVICE WITH BEST POSSIBLE CONNECTION IN YOUR AREA BY REFRESHING THE SIGNAL CONNECTION. i.e. AFTER USING THIS APP, YOUR NETWORK SIGNAL CAN GET INCREASED IN STRENGTH (BY SETTING THE BEST NETWORK SIGNAL), OR STAY CONSTANT(IF THERE IS NO BETTER NETWORK SIGNAL).
[[Works perfectly for CDMA technology. GSM may not always work.]]

Similar Messages

  • Nokia C7 GPS not working after belle update!

    Hi everyone, i had a C7, working great till i updated it with symbian belle.
    okay here is what i did.
    -my GPS was working on symbian anna with maps version 3.06beta
    -i updated the phone to symbian belle from symbian anna.
    -installed nokia maps 3.06 beta, and replaced the one that came with the update because it had the option of route planning which the installed map did not.
    -this was the first time i checked to see if the GPS was working after the update, and it did not work even after i stood in an open field for half an hour.
    -i learned that the latest update of nokia maps in fact had route planning, so i used the nokia PC suite to reset the phone software, and then later updated everything that was listed in the software update app.
    -my GPS could still not work after i stood in the same damn field for another half an hour.
    -now it will just give approximate positions based on the wireless networks, and not give any accurate position, so i cant use it for navigation anymore.
    -i tried running the gpsinfoqt app, and it keeps saying searching for a signal, but it never finds one!
    Please help me!! if there is any way i could flash the C7 or run a diagnostic or something so atleast i figure what is wrong!

    Hi akkudub, 
    Welcome to Nokia discussions board!
    Have you used Nokia Suite for the update? 
    I advise you to follow the steps below in order to get your GPS fully working again:
    1) Uninstall the current version of Nokia Suite that you have. 
    2) Clean the registry with a registry cleaner. 
    3) On your PC, go to Start > Run and type %temp% and click on "Run". Delete all Nokia folders from the folder that opens. 
    4) Download the newest Beta version of Nokia Suite from this link: 
    http://betalabs.nokia.com/apps/nokia-suite-beta
    You will need to sign in to your Nokia account - the same credentials used to log into this forum. 
    We will appreciate your feedback once you have tried this program!
    Once Nokia Suite is installed, please connect your device to it and perform the available updates if any is available. Alternatively please reinstall the current software. Also, click on the Maps tab and download the relevant maps files (Europe, UK etc...)
    Let us know how you get on and feel free to post any other questions you may have. 
    Regards, 
    astra2025
    Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • Music/iTunes Match not working properly since update to iOS 7

    Music/iTunes Match not working properly since update to iOS 7

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Problems with browsers and 'w' key since updates

    Hi
    I ran 'pacman -Syu' a little over a week ago, and since then I've been experiencing two rather odd problems.
    1.
    Using any web-browser (firefox, epiphany, songbird, etc), visiting pages that make use of javascript (i -think- that's the cause) makes the browser stop responding for 10-20 seconds. It goes grey and everything. And then eventually it starts working again. This occurs on many websites such as Facebook, Woot.com, to name a few big ones. It's really starting to drive me nuts.
    2.
    This problem's much weirder. After starting my computer, the w key is very unresponsive. By that I mean for a 'w' keystroke to register I need to hold down the 'w' key for 1 or 2 seconds, after which it will finally work. At first I thought this was a problem with my keyboard, but as the computer remains on, the problem slowly disappears - after about 30 minutes, the 'w' key works as expected. I don't think this is an X/GNOME problem, as I experience the same problems in the TTYs.
    I have a Sony Vaio FE-890:
    oliver@helios:~$ uname -a
    Linux helios 2.6.28-ARCH #1 SMP PREEMPT Fri Feb 13 11:03:55 CET 2009 x86_64 Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz GenuineIntel GNU/Linux
    I've been updating frequently in the interim hoping the problems will go away, but so far no luck. Any thoughts?

    Hi
    Thanks for your suggestions.
    Also, flash doesn't work on webpages anymore. I'm assuming this is some problem with the nspluginwrapper thing...
    Here's pacman.log of the fateful upgrade:
    [2009-02-10 10:32] synchronizing package lists
    [2009-02-10 10:32] starting full system upgrade
    [2009-02-10 11:37] synchronizing package lists
    [2009-02-10 11:38] starting full system upgrade
    [2009-02-10 13:10] removed gnome-network-manager (0.6.5-1)
    [2009-02-10 13:10] upgraded tzdata (2008i-1 -> 2009a-1)
    [2009-02-10 13:10] Generating locales...
    [2009-02-10 13:10] en_US.UTF-8... done
    [2009-02-10 13:10] en_US.ISO-8859-1... done
    [2009-02-10 13:10] Generation complete.
    [2009-02-10 13:10] upgraded glibc (2.9-2 -> 2.9-4)
    [2009-02-10 13:10] upgraded readline (5.2.013-1 -> 5.2.013-2)
    [2009-02-10 13:10] upgraded bash (3.2.048-1 -> 3.2.048-3)
    [2009-02-10 13:10] upgraded dhcpcd (4.0.7-1 -> 4.0.10-1)
    [2009-02-10 13:10] upgraded pm-utils (1.2.3-3 -> 1.2.3-4)
    [2009-02-10 13:10] upgraded hal (0.5.11-4 -> 0.5.11-7)
    [2009-02-10 13:10] upgraded libnetworkmanager (0.6.6-1 -> 0.7.0-1)
    [2009-02-10 13:10] upgraded networkmanager (0.6.6-1 -> 0.7.0-1)
    [2009-02-10 13:10] installed network-manager-applet (0.7.0-1)
    [2009-02-10 13:10] upgraded aircrack-ng (1.0_rc1-1 -> 1.0_rc2-1)
    [2009-02-10 13:10] upgraded gcc-libs (4.3.2-2 -> 4.3.3-1)
    [2009-02-10 13:10] upgraded xcb-proto (1.2-2 -> 1.3-1)
    [2009-02-10 13:10] upgraded libxcb (1.1.90.1-1 -> 1.1.93-1)
    [2009-02-10 13:10] upgraded libx11 (1.1.5-2 -> 1.1.99.2-1)
    [2009-02-10 13:10] upgraded amsn (0.97.2-4 -> 0.97.2-8)
    [2009-02-10 13:10] ATTENTION DB PACKAGE:
    [2009-02-10 13:10] Please consider to run db_upgrade on Berkeley DB databases with a major db version number update.
    [2009-02-10 13:10] upgraded db (4.7.25-1 -> 4.7.25-2)
    [2009-02-10 13:10] upgraded apache (2.2.11-1 -> 2.2.11-2)
    [2009-02-10 13:10] upgraded libvorbis (1.2.0-1 -> 1.2.1rc1-1)
    [2009-02-10 13:10] upgraded avidemux (2.4.3-2 -> 2.4.4-1)
    [2009-02-10 13:10] upgraded texinfo (4.13a-1 -> 4.13a-3)
    [2009-02-10 13:10] upgraded binutils (2.19-1 -> 2.19.1-1)
    [2009-02-10 13:10] upgraded boost (1.36.0-2 -> 1.37.0-1)
    [2009-02-10 13:10] upgraded brasero (0.9.0-1 -> 0.9.1-1)
    [2009-02-10 13:10] upgraded curl (7.19.2-1 -> 7.19.3-1)
    [2009-02-10 13:10] upgraded pycairo (1.8.0-2 -> 1.8.2-1)
    [2009-02-10 13:10] upgraded pygtk (2.13.0-2 -> 2.14.0-1)
    [2009-02-10 13:10] upgraded deluge (1.1.0-1 -> 1.1.2-1)
    [2009-02-10 13:10] upgraded device-mapper (1.02.29-1 -> 1.02.30-1)
    [2009-02-10 13:10] upgraded ed (1.1-2 -> 1.2-1)
    [2009-02-10 13:10] upgraded eigen (1.0.5-1 -> 2.0.0-1)
    [2009-02-10 13:10] upgraded fakeroot (1.11.4-1 -> 1.12.1-1)
    [2009-02-10 13:10] upgraded file (4.26-1 -> 5.00-1)
    [2009-02-10 13:10] upgraded gcc (4.3.2-2 -> 4.3.3-1)
    [2009-02-10 13:10] upgraded libtasn1 (1.7-1 -> 1.8-1)
    [2009-02-10 13:10] upgraded gnutls (2.6.3-1 -> 2.6.4-1)
    [2009-02-10 13:10] upgraded inputproto (1.4.4-1 -> 1.5.0-1)
    [2009-02-10 13:10] upgraded xextproto (7.0.4-1 -> 7.0.5-1)
    [2009-02-10 13:10] upgraded libxext (1.0.4-1 -> 1.0.5-1)
    [2009-02-10 13:10] upgraded ghostscript (8.63-4 -> 8.64-1)
    [2009-02-10 13:10] upgraded hwdetect (2008.12-4 -> 2009.01-1)
    [2009-02-10 13:10] upgraded imagemagick (6.4.8.2-1 -> 6.4.9.2-1)
    [2009-02-10 13:10] upgraded inetutils (1.6-2 -> 1.6-3)
    [2009-02-10 13:10] warning: /etc/inittab installed as /etc/inittab.pacnew
    [2009-02-10 13:10] upgraded initscripts (2008.09-2 -> 2009.01-1)
    [2009-02-10 13:11] update desktop mime database ...
    [2009-02-10 13:11] upgraded inkscape (0.46-9 -> 0.46-10)
    [2009-02-10 13:11] upgraded mkinitcpio (0.5.21-1 -> 0.5.23-1)
    [2009-02-10 13:11] >>>
    [2009-02-10 13:11] >>> If you use the LILO bootloader, you should run 'lilo' before rebooting.
    [2009-02-10 13:11] >>>
    [2009-02-10 13:11] >>> Updating module dependencies. Please wait ...
    [2009-02-10 13:11] >>> MKINITCPIO SETUP
    [2009-02-10 13:11] >>> ----------------
    [2009-02-10 13:11] >>> If you use LVM2, Encrypted root or software RAID,
    [2009-02-10 13:11] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2009-02-10 13:11] >>> More information about mkinitcpio setup can be found here:
    [2009-02-10 13:11] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2009-02-10 13:11]
    [2009-02-10 13:11] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2009-02-10 13:11] ==> Building image "default"
    [2009-02-10 13:11] ==> Running command: /sbin/mkinitcpio -k 2.6.28-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2009-02-10 13:11] :: Begin dry run
    [2009-02-10 13:11] :: Parsing hook [base]
    [2009-02-10 13:11] :: Parsing hook [udev]
    [2009-02-10 13:11] :: Parsing hook [autodetect]
    [2009-02-10 13:11] :: Parsing hook [pata]
    [2009-02-10 13:11] :: Parsing hook [scsi]
    [2009-02-10 13:11] :: Parsing hook [sata]
    [2009-02-10 13:11] :: Parsing hook [usb]
    [2009-02-10 13:11] :: Parsing hook [keymap]
    [2009-02-10 13:11] :: Parsing hook [filesystems]
    [2009-02-10 13:11] :: Generating module dependencies
    [2009-02-10 13:11] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2009-02-10 13:11] ==> SUCCESS
    [2009-02-10 13:11] ==> Building image "fallback"
    [2009-02-10 13:11] ==> Running command: /sbin/mkinitcpio -k 2.6.28-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2009-02-10 13:11] :: Begin dry run
    [2009-02-10 13:11] :: Parsing hook [base]
    [2009-02-10 13:11] :: Parsing hook [udev]
    [2009-02-10 13:11] :: Parsing hook [pata]
    [2009-02-10 13:11] :: Parsing hook [scsi]
    [2009-02-10 13:11] :: Parsing hook [sata]
    [2009-02-10 13:11] :: Parsing hook [usb]
    [2009-02-10 13:12] :: Parsing hook [keymap]
    [2009-02-10 13:12] :: Parsing hook [filesystems]
    [2009-02-10 13:12] :: Generating module dependencies
    [2009-02-10 13:12] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2009-02-10 13:12] ==> SUCCESS
    [2009-02-10 13:12] upgraded kernel26 (2.6.28.1-1 -> 2.6.28.4-1)
    [2009-02-10 13:12] upgraded lib32-freetype2 (2.3.7-1 -> 2.3.8-1)
    [2009-02-10 13:12] upgraded lib32-gcc-libs (4.3.2-1 -> 4.3.3-1)
    [2009-02-10 13:12] upgraded lib32-gtk2 (2.14.6-1 -> 2.14.7-1)
    [2009-02-10 13:12] upgraded lib32-readline (5.2-8 -> 5.2.013-1)
    [2009-02-10 13:12] upgraded libice (1.0.4-1 -> 1.0.5-1)
    [2009-02-10 13:12] upgraded libmikmod (3.1.12-1 -> 3.1.12-2)
    [2009-02-10 13:12] upgraded libnova (0.12.2-1 -> 0.12.3-1)
    [2009-02-10 13:12] upgraded libsndfile (1.0.17-2 -> 1.0.18-1)
    [2009-02-10 13:12] upgraded libsamplerate (0.1.4-1 -> 0.1.6-1)
    [2009-02-10 13:12] upgraded libxi (1.1.4-1 -> 1.2.0-1)
    [2009-02-10 13:12] upgraded lvm2 (2.02.43-1 -> 2.02.44-1)
    [2009-02-10 13:12] upgraded man-pages (3.16-1 -> 3.17-1)
    [2009-02-10 13:12] upgraded mlocate (0.21-1 -> 0.21.1-1)
    [2009-02-10 13:12] upgraded opal (3.4.4-2 -> 3.4.4-2.1)
    [2009-02-10 13:12] * relogin or source /etc/profile.d/openoffice.sh
    [2009-02-10 13:12] * see http://wiki.archlinux.org/index.php/Openoffice
    [2009-02-10 13:12] how to use extensions, e.g. for spell checking
    [2009-02-10 13:12] see /opt/openoffice/share/extension/install what
    [2009-02-10 13:12] is shipped with this package
    [2009-02-10 13:12] upgraded openoffice-base (3.0.0-4 -> 3.0.1-1)
    [2009-02-10 13:12] upgraded patch (2.5.9-1 -> 2.5.9-2)
    [2009-02-10 13:12] upgraded php (5.2.7-2 -> 5.2.8-1)
    [2009-02-10 13:13] upgraded pidgin (2.5.3-1 -> 2.5.4-1)
    [2009-02-10 13:13] upgraded pixman (0.12.0-1 -> 0.14.0-1)
    [2009-02-10 13:13] upgraded pycups (1.9.42-2 -> 1.9.45-1)
    [2009-02-10 13:13] upgraded qt (4.4.3-4 -> 4.4.3-5)
    [2009-02-10 13:13] upgraded reiserfsprogs (3.6.20-3 -> 3.6.21-1)
    [2009-02-10 13:13] upgraded sdparm (1.03-1 -> 1.03-2)
    [2009-02-10 13:13] upgraded smpeg (0.4.4-4 -> 0.4.4-5)
    [2009-02-10 13:13] upgraded sound-theme-freedesktop (0.1-1 -> 0.2-1)
    [2009-02-10 13:13] upgraded syslog-ng (2.0.9-1 -> 2.1.3-2)
    [2009-02-10 13:13] upgraded system-config-printer (1.1.1-1 -> 1.1.3-1)
    [2009-02-10 13:13] extracting fonts... done.
    [2009-02-10 13:13] rebuilding font cache... done.
    [2009-02-10 13:13] upgraded ttf-ms-fonts (2.0-1 -> 2.0-2)
    [2009-02-10 13:13] upgraded unrar (3.8.5-1 -> 3.8.5-2)
    [2009-02-10 13:13] upgraded vlc (0.9.8a-4 -> 0.9.8a-5)
    [2009-02-10 13:13] upgraded wireshark (1.0.5-1 -> 1.0.6-1)
    [2009-02-10 13:13] upgraded xcb-util (0.3.2-1 -> 0.3.3-1)
    [2009-02-10 13:13] upgraded xf86-input-evdev (2.1.0-1 -> 2.1.2-1)
    [2009-02-10 13:13] upgraded xf86-input-keyboard (1.3.1-1 -> 1.3.2-1)
    [2009-02-10 13:13] upgraded xf86-input-synaptics (0.99.3-1 -> 1.0.0-1)
    [2009-02-10 13:13] upgraded xine-lib (1.1.16.1-1 -> 1.1.16.1-2)
    [2009-02-10 13:13] upgraded xkeyboard-config (1.4-2 -> 1.5-1)
    [2009-02-10 13:13] upgraded xorg-xinit (1.1.0-1 -> 1.1.1-1)
    [2009-02-10 13:13] upgraded xterm (239-1 -> 241-1)
    [2009-02-10 15:15] synchronizing package lists
    [2009-02-10 15:16] starting full system upgrade
    [2009-02-10 15:17] ==> to use yaourt as user,add these entries to /etc/sudoers:
    [2009-02-10 15:17] user ALL=NOPASSWD: /usr/bin/pacman
    [2009-02-10 15:17] user ALL=NOPASSWD: /usr/bin/pacdiffviewer
    [2009-02-10 15:17] (Please, use sudo very carefully)
    [2009-02-10 15:17] ==> for a full colorized output, install pacman-color and set PacmanBin in /etc/yaourtrc
    [2009-02-10 15:17] upgraded yaourt (0.9.1-1 -> 0.9.2.4-1)
    [2009-02-10 15:18] synchronizing package lists
    [2009-02-10 15:19] starting full system upgrade
    [2009-02-10 15:24] upgraded bin32-wine (1.1.10-1 -> 1.1.14-1)
    [2009-02-10 15:24] Reading package info from stdin ... done.
    [2009-02-10 15:24] Writing new package config file... done.
    [2009-02-10 15:24] upgraded haskell-sdl (0.5.4-1 -> 0.5.5-1)
    [2009-02-10 15:24] Reading package info from stdin ... done.
    [2009-02-10 15:24] Writing new package config file... done.
    [2009-02-10 15:24] upgraded haskell-sdl-ttf (0.5.2-1 -> 0.5.5-1)
    [2009-02-10 15:25] "nspluginwrapper -r $HOME/.mozilla/plugins/* ; nspluginwrapper -v -a -i" to recreate plugins after update
    [2009-02-10 15:25] Konqueror users need to add $HOME/.mozilla/plugins/ to konqueror plugins path
    [2009-02-10 15:25] upgraded nspluginwrapper (1.0.0-1 -> 1.2.2-1)
    [2009-02-10 15:25] installed lib32-curl (7.19.3-1)
    [2009-02-10 15:25] installed lib32-nspr (4.7.3-1)
    [2009-02-10 15:25] installed lib32-sqlite3 (3.6.10-1)
    [2009-02-10 15:25] installed lib32-nss (3.12.2-1)
    [2009-02-10 15:26] Run
    [2009-02-10 15:26] nspluginwrapper -v -r ~/.mozilla/plugins/npwrapper.libflashplayer.so
    [2009-02-10 15:26] nspluginwrapper -v -a -i
    [2009-02-10 15:26] to upgrade the plugin
    [2009-02-10 15:26] upgraded nspluginwrapper-flash (9.0.124.0-1 -> 10.0.15.3-3)

  • MMS texts not working properly since updating to KitKat

    I used to be able to send and receive group texts although I would sometimes have to 'download' the group messages, which was a pain but at least I got the messages.  Since updating to KitKat on 5/21/14, I have been unable to receive group texts at all and any pictures are VERY slow in coming to me.  For the group texts, I will receive a notification but can never actually SEE the text no matter which way I go in to see the message.  With pictures, there will be the little (1) - or whatever number of pics I've received - at the bottom of the messaging icon, but the pictures don't show up at all, or they will come through after I turn the phone off and back on...which I don't do every hour of every day.  This is so annoying! 
    I have seen other people in the forums having similar problems and they have recommended force stopping the messaging app, clearing the data...blah blah...but that doesn't work.  I did a chat with a Verizon rep earlier today for about an hour and still didn't get a fix to my issue before I had to sign off of the chat due to a meeting.  She had me delete all my text threads (which I wasn't a fan of), and doing the force stop, clear data, clear cache, etc. none of which worked.
    This is making me not like my phone right now.

    Hi Kevin.  Thank you for your response.  I was using the normal text messaging application, not Hangouts.  I'm having issues with the picture messages no matter where I am at, on Wifi and on mobile data.  The Verizon tech I chatted with yesterday had me try both ways and should be documented in my account if you can access that information. 
    I did try downloading a 3rd party app last night (Textra) and picture messages go fine through that app, but I still have the trouble with group messages.  I tried to send a group text to my husband (on an iPhone) and my cousin (on a Samsung) to test things this morning and my cousin received it and my husband didn't.  When my cousin responded it went to a single thread, not the group text. 
    I would really like to just use my phone like normal, without having to find a suitable 3rd party app to make things work right with my messaging. 

  • My iPhone 4 keypad isn't working correctly since updating to iOS 7.2.  Any ideas please?

    My iPhone 4 keypad isn't working since updating to ios7.2. The letters don't show as you type and then suddenly appear all at once making it impossible to put in a password. Any ideas please?

    Hi kathycamper,
    If your iPhone's keypad seems to stall for short periods of time and then resume, I would recommend putting the iPhone through this troubleshooting assistant:
    iPhone Troubleshooting Assistant - Frozen or Unresponsive iPhone
    http://www.apple.com/support/iphone/assistant/phone/
    Cheers,
    - Ari

  • Why is my iPad working slower since updating with IOS  7

    I have recently uploaded the new update for iPad and it is now significantly slower and I liked the old themes better,this latest update has made downloading and surfing really slow anyone else experiencing this or is it just me?

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • USB's not working properly since updating 10.6.4

    Since i've updated to Snow Leopard 10.6.4 rear USB connector is not working at all.
    USB don't recognize my Woxter multimedia hard disk.
    I'v got an iMac Late 2009 27 inch Core i5
    Message was edited by: pacopec

    My firewire external MY BOOK hard drive will not mount with 10.6.4
    I tried every possible combination. OS sees the hard drive, but it will not mount.
    I used SuperDuper to go back to 10.6.3. Now everything is OK

  • Mail not working properly since updating

    Hi, since going from Snow Leopard to Mavericks, Mail has become completely useless for me.
    It doesn't pull all the emails from gmail (as it used to - even my @me account doesn't seem to work properly), nor does it update as soon as emails come in. Not sure what to do anymore - I have already delted and re-added accounts, etc but that has not made any difference. Does anyone know what I can do? Thanks!

    Do a backup.
    Quit Mail.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Go to Library/Containers/com.apple.mail.  Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    Restart, re-launch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. You can then put the folder in the Trash. If the problem remains, return the folder to where you got it replacing the one that is there. 
    Information learned from Linc Davis. Thanks to leonie for some information contained in this.
    Crashes/quits unexpectedly

  • Standby doesn't work anymore since updating to v5.0.0.103​6 & lock keyboard works differentl​y

    Hi all,
    Hope you guys are able to help me with my problem
    I updated my Blackberry 8900 Curve over the weekend to
    v5.0.0.1036(Platform 5.2.0.104) Provider is Vodafone.de
    This updated was offered when connecting my device to BlackBerry Desktop Application.
    After this update successfully took place I discovered the problem that the upper top right button (usually used to mute) does not send my device to standby anymore when being pressed longer than 3 seconds.
    This function worked perfectly prior to this update. Unfortunately I did not know on what version I was before, but as I`m doing updates on a  more of less regular base I assume it was the prior available one.
    Together with this problem I discovered something that is also working different than before.
    When I press the keyboard lock button (upper top left button) the lock now gets activated directly and
    the screen turns black. Before this update took place the owner details were showing up when pressing this button and the screen turns dark after the defined time to go off.
    The owner details are added correctly and show up when going to properties-owner.
    I did a secure delete (security options - security delete) of the device and started from scratch twice already, but the problem remains the same.
    Is there any way to get at least the standby working again.
    I´m using an case-mate holster with build in battery allow me to recharge my BB when no power plug is avail. Unfortunately this one does not have a magnet that send the device to standby automatically when plugged into the holster, so this manual standby option is important for me to
    extend battery life.
    Looking forward to your reply.
    Thanks in advance.
    Kind Regards
    Agent
    Solved!
    Go to Solution.

    Agent wrote:
    I discovered the problem that the upper top right button (usually used to mute) does not send my device to standby anymore when being pressed longer than 3 seconds.
    Together with this problem I discovered something that is also working different than before.
    When I press the keyboard lock button (upper top left button) the lock now gets activated directly and
    the screen turns black. Before this update took place the owner details were showing up when pressing this button and the screen turns dark after the defined time to go off.
    The owner details are added correctly and show up when going to properties-owner.
    This is working as designed with the new upgraded operating system you installed. There is not an option to change it back, only to downgrade your operating system back to the version you had installed previously.
    If you want to lock the screen, you will need to set a password on the device.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem with Creative Cloud Desktop app since update to Windows 8.1

    Hi, I have updated my desktop and laptop to Windows 8.1 over the past day, and have noticed a problem with the Creative Cloud Desktop app.
    Some menu items when I right-click on either the CC system tray icon, or click on the Settings menu icon in the app interface itself do not show.  I've included a screenshot of the problem.
    I have tried uninstalling and reinstalling the desktop app, but this has not worked.  Any ideas?

    I am experiencing issues similar to the post above, with smaller floating windows but no dialouge. I uninstalled creative cloud desktop then re-installed- Issue is partly fixed, but now I get this:
    My system build:
    CPU:           Intel Core i7-3770 (Ivy Bridge-DT, E1)
                   3400 MHz (34.00x100.0) @ 3900 MHz (39.00x100.0)
    Motherboard:   ASRock Z77 Extreme6
    Chipset:       Intel Z77 (Panther Point DH)
    Memory:        16384 MBytes @ 666 MHz, 9.0-9-9-24
                   - 8192 MB PC19200 DDR3 SDRAM - G Skill F3-2400C10-8GTX
                   - 8192 MB PC19200 DDR3 SDRAM - G Skill F3-2400C10-8GTX
    Graphics:      Intel Ivy Bridge-DT GT2 - Integrated Graphics Controller [E1/L1/N0/P0] [ASRock]
                   Intel HD Graphics 4000, 2112 MB
    Graphics:      GIGABYTE GeForce GTX 660 Ti
                   NVIDIA GeForce GTX 660 Ti, 3072 MB GDDR5 SDRAM
    Drive:         SanDisk SDSSDHP128G, 125.0 GB, Serial ATA 6Gb/s @ 6Gb/s
    Drive:         Corsair Force GT, 117.2 GB, Serial ATA 6Gb/s @ 6Gb/s
    Drive:         SAMSUNG HD204UI, 1953.5 GB, Serial ATA 3Gb/s
    Sound:         Intel Panther Point PCH - High Definition Audio Controller [C1]
    Sound:         NVIDIA GK104 - High Definition Audio Controller
    OS:            Microsoft Windows 8.1  (x64) Build 9600

  • Play and Stop with Spacebar not working in newly updated Premiere CC

    Tried on two different machines (iMac and MacPro) in last 24 hours. Audio also goes out randomly

    Have not connected any external audio devices. The audio dropout seems to be a common problem according to other staff and users on the forums, with no real solution. The spacebar not working is a new issue though that just started once I updated yesterday on two different machines, both on OSX 10.9.4

  • Flash-files not working properly since update on june 21st.

    Hi!
    I have this problem..
    Some of my flash-files just started acting weird since the latest "patch"...
    Says: "WARNING: Actions on button or MovieClip instances are not supported in ActionScript 3.0. All scripts on object instances will be ignored."
    And it just ignores my actions....
    sad
    //Amanda

    I am having the same problem since downloading ios6
    Almost wish I hadn't
    Can't get YouTube as apple removed it
    When I go to apps it keeps giving me a blank page too
    I type in YouTube and it goes to page with cancel far left. iPad iPhone app in middle and search box for YouTube far right
    But it just goes back to beginning when I cancel
    Is it corrupted..will apple sort this ASAP
    It's not only you tube I want...
    Help apple! Or anyone

  • My website containing a swf file does not work now since update of 3.6.4

    I have recently set up my own site using flash panorama player (swf file) which has been successfully working for a few months now: annedoncaster.co.uk. I recently did an update on my firefox browser which I am sure has caused an issue with my panoramas showing, they no longer load or show on my website. I have tried all the other browsers and they all load the panorama, which is very odd.
    == This happened ==
    Every time Firefox opened
    == Update of firefox 3.6.4

    @'''Anne''':
    That is a tough one.
    I can only make it work if I disable OOPP for the Flash plugin and close and restart Firefox.
    It works if I copy and paste the URL of the Flash in the location bar, but as soon as I use HTML code then it fails.
    Apparently the plugin-container process isn't able to play that file.
    You can try to file a bug report for it on https://bugzilla.mozilla.org/ to see if anything comes up.
    See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
    You can set the prefs dom.ipc.plugins.enabled.* to false on the about:config page to disable the plugin-container process.
    dom.ipc.plugins.enabled (currently false by default)
    dom.ipc.plugins.enabled.npswf32.dll (Flash)
    To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
    If you see a warning then you can confirm that you want to access that page.

  • Firefox hasn't worked right since update to 21, help

    hi my mom lost all her security apps; all privacy apps; etc. TNA toolbar wasn't working, i uninstalled; the health report isn't working at all; something is terribly wrong here. can she go back to firefox 20 ? she had no troubles at all & was getting used to ghostery, cookie cruncher?, etc. now, we can't even log into Facebook, Ebay, & Hotmail. help please. i'm writing to you in the firefox safe mode. thanks, vickie (another firefox user, no troubles yet) ps how do i remove the Iwin thing in the add-ons ?
    ''[Personal information removed by moderator. Please read [[Forum rules and guidelines]], thanks.]''

    Hi there!
    If Firefox is working for you in Safe Mode, then the next time Firefox starts up with all your add-ons disabled, enable them one by one until you figure out which one is causing your issue.

Maybe you are looking for

  • PL/SQL WITH Clause

    Hi Gurus, I have been trying to find more information regarding the WITH CLAUSE, but most of the info I find is related to Forums. Do you know where i could find Oracle specific documentation on this? I really like using that clause, but i have notic

  • HP Officejet model 6110 all-in-one won't send out fax

    I have the subject machine.  I have not used it for a year.  Ir recently started using it again.  The printer and scan works OK.  The Fax machine seems to ring on incoming phone calls (I can hear it on the machine).  The outgoing fax dials the number

  • I need to unistall flash player 11.7 & install 11.6

    After getting a prompt to install the latest flash player version, I did & installed flash player 11.7.  Right after doing that, I went to Smilebox to finish a birthday creation & found that there was NO sound.  I guess I'm not the only one & Smilebo

  • Reg update

    hi all   UPDATE TABLE    zinv_header .                     SET    invoice_core      = p_perinv                               invoice_created  = inv_cnt                                username         = sy-uname                               systemdat

  • Creating small size table calendar on iPhoto 9

    How can I create a small size table calendar (e.g 20x20 cm) on iPhoto (not the built-in wall calendar)? Thank you Duc