Galaxy S4 not charging after recent update

After installing the recent software update onto my Galaxy S4, it's been charging extremely slow. Last night I put the phone to charge with 35% battery life and this morning it was at only 65%. I've been charging it singe i came to work and it hasn't cracked the 80% mark.
Can someone please assist?

    Hi Mr.0 - Let's give you back the power to power your phone! Are you using the original charger that came with the phone? Are you charging while connected to wall or a USB port? Since this began have you removed and reinserted the battery? I am eager to get this resolved!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Similar Messages

  • Battery Draining faster and not charging after recent update.

    Having serious issues with draining battery. Can we get a fix from Verizon fast ?

        Let's get to the bottom of the issue and explore options to resolve Sproddut! When did battery issue start? Was it after a particular application install? Was it after a software update? Any physical/water damager?
    AntonioC_VZW
    Follow us on Twitter at www.twitter.com/VZWSupport

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My Iphone 4 will not charge after Ios7 update, does anyone know how to fix ?, My Iphone 4 will not charge after Ios7 update, does anyone know how to fix ?

    My Iphone 4 will not charge after ipdate to IOS 7.0.4, Does anyone have a solution ? I have tried apple cables and chargers. I see many have the same issue. Anyone made progress ?

    No offence, but as with quite a few others, my Iphone stopped charging on mains after iOS 7.0.4 update too.
    Not sure you can categorically advise that "it simply is not a software issue" when so many different people are having the same symptoms after updating their iOS   Just have a quick Google!
    Luckily my (original Apple) cable will still allow recharging via USB to a laptop. So, process of elimination would point to a bricked charger that was working faultlessly up until the iOS 7.0.4 update was applied. Seems quite a stretch to be a coincidence.
    Look forward to an explanation ..... and an update? ......

  • Macbook battery not charging after software update

    I was doing some work on my MacBook (4,1) with the charger plugged in and the lid closed (I was using my TV as a montior. There was a software update for itunes and a few others and now it's saying the battery needs to be serviced!
    The battery currently has 62% charge, i've not disconnected the charger once in teh few hours I was working. Anyone got any ideas as to what could cause this?
    The change to needing the battery serviced was not straight after the update, I don't think so anyway. I've not really noticed it until I went to pick up my MacBook and it all started to go haywire. It because unresponsive, black screen etc.
    I've tried to reset the SMC and i've checked the charge cycyles too and it's about 250 so there's no problem there. It's just annoying as this is the 3rd battery i've had for this macbook, the other two being replaced under warranty. Now the warranty is up and it needs chaging for a 4th time!

    Hi imi_uk,
    I see you marked this question as "solved" is that the case?
    If not, are you able to startup your computer via "safe boot" by holding the SHIFT key on startup (until the Apple logo appears and the gear appears below it).
    The next step, would also be to boot off the system restore disc that came with your computer and attempt to repair the volume (the internal HD) via the the built-in disc utility.

  • My imessage is not Working after recent update

    My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?

    It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.

  • Firefox will not open after recent update of all computer lab servers, Windows server 2008 R2, Multipoint 2011

    All 3 computer lab servers were recently updated and rebooted. Java was updated as well to 7u21. Now all 3 do not respond when Firefox icon is clicked, from any thin-client or remote desktop session/user. There is no popup error, just an hour-glass for about 5 seconds and then nada. IE is fine. I can't tell if it was the java update or a windows security update, and I'm not seeing anything in the error logs

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • M4b files will not sync after recent update

    I recently updated the software on my ipod touch 4th gen. After updating, I tried to sync my playlists, but not all of the files would sync. After some investigation, I figured out that the files that wouldn't sync were audio books in m4b format. They synced just fine before the update. What is the problem here?

    Thank you for the response, I have not tried a restore, won't that wipe out everything on the phone? Leaving on vacation and don't have time to start over, I'll have to try this after I get back if the next response does not solve the problem.

  • Ntlmaps not running after recent update. (FIXED)

    FIXED - Ended up re-writing MAKEPKG, depends, modified patches file and new MD5 sums to build on Python 2.7.  Instructions below for anyone who needs them. Cheers - Arkay.
    Hi All,
    I use ntlmaps in conjunction with corkscrew to create ssh tunnels out through my work proxy to my home network.  It's always worked perfectly fine until a recent pacman -Syu.
    From looking into it as much as I can it appears that Python 3 has been pulled into the mix where ntlmaps appears only to work with python 2.
    In the original effort to fix it I updated to the latest MAKEPKG in the AUR which also doesn't seem to work with either version of Python.
    I've attempted to debug the issues in Python though my knowledge of the language is sorely lacking.
    The initial error I get is:
    File "/usr/bin/ntlmaps", line 31
    print 'NTLM authorization Proxy Server v%s' % conf['GENERAL']['VERSION']
    ^
    SyntaxError: invalid syntax
    But the code block above appears ok to me.  On further investigation (running it line by line in interactive mode), it appeared to be the includes causing the issue at which point I found dos line endings on all the code in the site-python ntlmaps code.  After removing all of them and converting back to unix eol's (didn't seem to really make a difference), I still get the same syntax errors.  Further looking finds includes to libraries which possibly no longer exist or are depreciated in python 3. "threads" seems to be the main offender, according to the doco it is depreciated but should still work (tm).
    I'm pretty much at a loss as to what to do next.  I've tried swapping to cntlm but for some reason our proxy won't allow the connections through the way ntlmaps does.
    I also just tried to re-install it with aurget.  The makepkg worked but the install script failed with:
    Byte compiling python modules...
    error: command failed to execute correctly
    Looking into that now too...
    Any help would be much appreciated.  Perhaps someone else can attempt to install and run it on their system.
    Cheers,
    Arkay.
    P.S.  My system is i686, recently updated.
    P.P.S.  Apologies to the mods.  This should most likely be in the PKGBUILD forms... Please move and remove this P.P.S
    Last edited by arkay (2010-10-26 01:00:09)

    Ok.  For some reason I haven't (yet) been able to get the PKGBUILD working with python 3.
    I have however updated everything to work as expected with python 2.7 (specifically ntlmaps-0.9.9.0.1 under python2 2.7-2).
    Here's the relevant bits for anyone who would like to build against 2.7 instead (if you have problems with 3).
    Filename: PKGBUILD
    # Contributor: Graziano <[email protected]>
    # Maintainer: John Gerritse <[email protected]>
    pkgname=ntlmaps
    pkgver=0.9.9.0.1
    pkgrel=5
    pkgdesc="'NTLM Authorization Proxy Server' (APS) is a proxy software that allows you to authenticate via an MS Proxy Server using the proprietary NTLM protocol."
    url="http://ntlmaps.sourceforge.net/"
    license="GPL"
    arch=('i686' 'x86_64')
    depends=('python2')
    backup=('etc/conf.d/ntlmaps')
    install=$pkgname.install
    source=(http://downloads.sourceforge.net/sourceforge/$pkgname/${pkgname}-${pkgver}.tar.gz patches ntlmaps.install ntlmaps.rc)
    md5sums=('7ee0a00d5446f39ebbe5f0f90465986e'
    '0ba42ac958b124b8e635c1524b26138e'
    'a78770387e22c14a37bfdaee25c6594a'
    '602132fda99e27efdd636a946e034d6b')
    build() {
    PYTHONVER=`python2 -c 'import sys;print(sys.version[0:3])'`
    cd $srcdir/$pkgname-$pkgver/
    patch -Np1 -i ../patches
    install -D -m 600 server.cfg $pkgdir/etc/conf.d/$pkgname
    PYDEST_SITE=$pkgdir/usr/lib/python$PYTHONVER/site-packages
    mkdir -p $PYDEST_SITE/$pkgname
    cp -a lib/* $PYDEST_SITE/$pkgname
    install -m 644 __init__.py $PYDEST_SITE/$pkgname/__init__.py
    install -D -m 755 main.py $pkgdir/usr/bin/$pkgname
    install -D -m 755 ../ntlmaps.rc $pkgdir/etc/rc.d/ntlmaps
    echo $pkgname > $PYDEST_SITE/$pkgname.pth
    echo "echo $pkgname > $PYDEST_SITE/$pkgname.pth"
    Filename: ntlmaps.install
    # This is a default template for a post-install scriptlet. You can
    # remove any functions you don't need (and this header).
    # arg 1: the new package version
    pre_install() {
    /bin/true
    # arg 1: the new package version
    post_install() {
    echo "Byte compiling python modules..."
    python2 /usr/lib/python2.7/compileall.py >/dev/null 2>&1
    python2 -O /usr/lib/python2.7/compileall.py >/dev/null 2>&1
    # arg 1: the new package version
    # arg 2: the old package version
    pre_upgrade() {
    /bin/true
    # arg 1: the new package version
    # arg 2: the old package version
    post_upgrade() {
    echo "Byte compiling python modules..."
    python2 /usr/lib/python2.7/compileall.py >/dev/null 2>&1
    python2 -O /usr/lib/python2.7/compileall.py >/dev/null 2>&1
    # arg 1: the old package version
    pre_remove() {
    /bin/true
    # arg 1: the old package version
    post_remove() {
    /bin/true
    op=$1
    shift
    $op $*
    Filename: ntlmaps.rc
    #!/bin/bash
    . /etc/rc.conf
    . /etc/rc.d/functions
    case "$1" in
    start)
    PID=`pidof -o %PPID /usr/bin/ntlmaps`
    stat_busy "Starting ntlmaps"
    if [ -z "$PID" ]; then
    /usr/bin/ntlmaps > /var/log/ntlmaps.log 2>&1 &
    fi
    if [ ! -z "$PID" -o $? -gt 0 ]; then
    stat_fail
    else
    add_daemon ntlmaps
    stat_done
    fi
    stop)
    PID=`pidof -o %PPID /usr/bin/python2 /usr/bin/ntlmaps`
    stat_busy "Stopping ntlmaps"
    [ ! -z "$PID" ] && kill $PID &> /dev/null
    if [ $? -gt 0 ]; then
    stat_fail
    else
    rm_daemon ntlmaps
    stat_done
    fi
    restart)
    $0 stop
    sleep 1
    $0 start
    echo "usage: $0 {start|stop|restart}"
    esac
    Filename: patches
    diff -Naur ntlmaps-0.9.9.0.1/__init__.py ntlmaps-0.9.9.0.1_new//__init__.py
    --- ntlmaps-0.9.9.0.1/__init__.py 2005-06-10 13:49:35.000000000 +1000
    +++ ntlmaps-0.9.9.0.1_new//__init__.py 2010-10-25 12:49:03.820614080 +1100
    @@ -1,4 +1,4 @@
    -#!/usr/bin/python
    +#!/usr/bin/python2
    # This file is Copyright 2004 Darryl A. Dixon <[email protected]>
    # and is part of 'NTLM Authorization Proxy Server',
    @@ -20,10 +20,10 @@
    # 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
    -import os, sys
    +#import os, sys
    -ntlmaps_dir = os.path.dirname(os.path.abspath(__file__))
    -ntlmaps_libdir = ntlmaps_dir + '/lib'
    -sys.path.append(ntlmaps_libdir)
    +#ntlmaps_dir = os.path.dirname(os.path.abspath(__file__))
    +#ntlmaps_libdir = ntlmaps_dir + '/lib'
    +#sys.path.append(ntlmaps_libdir)
    -del os, sys
    +#del os, sys
    diff -Naur ntlmaps-0.9.9.0.1/lib/config.py ntlmaps-0.9.9.0.1_new//lib/config.py
    --- ntlmaps-0.9.9.0.1/lib/config.py 2005-06-10 13:46:43.000000000 +1000
    +++ ntlmaps-0.9.9.0.1_new//lib/config.py 2010-10-25 12:51:35.847799575 +1100
    @@ -52,7 +52,7 @@
    the config file. Otherwise the function falls back to
    'server.cfg' in the current directory. """
    - configFileName = configFileDir+'server.cfg'
    + configFileName = configFileDir+'ntlmaps'
    optionsList, notUsedArguments = getopt.getopt(argv[1:], 'c:')
    diff -Naur ntlmaps-0.9.9.0.1/main.py ntlmaps-0.9.9.0.1_new//main.py
    --- ntlmaps-0.9.9.0.1/main.py 2006-01-27 12:35:00.000000000 +1100
    +++ ntlmaps-0.9.9.0.1_new//main.py 2010-10-25 12:58:02.445983916 +1100
    @@ -1,4 +1,4 @@
    -#! /usr/bin/python
    +#! /usr/bin/python2
    # This file is part of 'NTLM Authorization Proxy Server'
    # Copyright 2001 Dmitry A. Rozmanov <[email protected]>
    @@ -18,17 +18,16 @@
    # Free Software Foundation, Inc.,
    # 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
    -import __init__
    import sys
    -import server, config, config_affairs
    +from ntlmaps import server, config, config_affairs
    # config affairs
    # look for default config name in lib/config.py
    -conf = config.read_config(config.findConfigFileNameInArgv(sys.argv, __init__.ntlmaps_dir+'/'))
    +conf = config.read_config(config.findConfigFileNameInArgv(sys.argv, '/etc/conf.d/'))
    conf['GENERAL']['VERSION'] = '0.9.9.0.1'
    Save each of the code blocks (cut/paste into an editor) with the filenames given into a directory.  Update/check the md5sums in the PKGBUILD for each (dunno how to upload files into a thread so you'll have to check the sums match after pasting/saving and I don't yet have AUR access).  Then run makepkg.  You should end up with a working ntlmaps for python2.7.
    Cheers,
    Arkay.
    Last edited by arkay (2010-10-26 03:40:20)

  • Lightening to HDMI not working after recent update

    I recently updated my Ipad and now my Lightening to HDMI adapter does not seem to work.  It was working fine up until the most recent update.   I know that the HDMI cable works and all the other connections are fine b/c it works fine when plugged into our blu-ray player. 
    Has anyone else had this problem, or does anyone know how to fix this issue?

    What recent update?  The last Epson R220 update for non intel Macs was 08/19/10:  http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=60202&prodoid=58654 761&BV_UseBVCookie=yes&infoType=Downloads&platform=Macintosh&x=21&y=13
    What happens when you click on the EPSON Printer Utility which should be inside the Utility folder?  Have you tried repairing permissions and restarting your computer?  Have you read Epson's user manual and/or contacted their tech support?
    I also have the R220 model.  Besides using their drivers, I also use the Gimp drivers:  http://gimp-print.sourceforge.net/MacOSX.php

  • Possible fix for Gmail not syncing after recent update

    Hey all,
    I've seen at least one person on the forums who's had issues with their Gmail not syncing after the latest update. I thought I would pass along my solution to the problem in case it worked for others. After I updated to the latest version of the iPhone software a couple of days ago, my mail accounts from Gmail were behaving strangely. For one thing, all of my saved e-mails on the iPhone were deleted. For another, it no longer received any e-mail from those accounts. Finally, I decided to test it out by creating a new e-mail account on my iPhone to sync with a disused Gmail address that I had not yet set up for IMAP on my phone. To my surprise, it worked perfectly! Then, after I checked the details of the new e-mail account with those of my existing accounts, I discovered that the incoming server port number was incorrect on the other accounts. It was 995 when it ought to have been 993. When I corrected the port numbers, all of the accounts synced perfectly. I hope that might work for someone else. It was at least worth a post on the forums, I figured. Have a wonderful St. Patrick's day, everyone!

    Fantastic! Worked a treat - thanks!
    Lucy

  • Iphone 5 not charging after software update

    I installed a latest iOS 6.1.4 update on my phone yesterday. Since then my iphone stopped charging (wall charger) for no apparent reason. The USB on my laptop is not recognizing it and not charging it. 
    Can you please help me sort this issue and fast ?
    Regards,
    Reena

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Apper not working after recent update

    Hi everyone,
    with today's update of pacman, apper stopped working, any solution to get it back and running? I get this in the terminal:
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    enumFromString ( Role ) : converted "" to "UnknownRole" , enum id 0
    enumFromString ( Group ) : converted "" to "UnknownGroup" , enum id 1
    enumFromString ( Filter ) : converted "" to "UnknownFilter" , enum id 3
    Error, cannot create transaction proxy
    QDBusError("com.trolltech.QtDBus.Error.InvalidObjectPath", "Invalid object path: Process /usr/lib/dbus-1.0/dbus-daemon-launch-helper received signal 5")
    Error, cannot create transaction proxy
    QDBusError("com.trolltech.QtDBus.Error.InvalidObjectPath", "Invalid object path: Process /usr/lib/dbus-1.0/dbus-daemon-launch-helper received signal 5")
    and in the GUI i get "an error occured" for everything, no package list, no nothing.
    Thanks.
    Edit: it started to work after a forced repo update today.
    Last edited by LyCC (2013-04-06 07:19:42)

    At my computer, there was a problem with the configuration file of pacman (/etc/pacman.conf). Do something with pacman in the terminal, and see if there is an warning message of pacman. After I updated the configuration file, the problem with Apper was gone.
    When solved, please change the subject with [SOLVED].

  • MacBook Pro not charging after Mavericks update

    Is anyone experiencing an issue with not being able to charge their Macbook after updating Mavericks? I'm unable to charge my 2011 MacBook Pro that has Mavericks installed. This issue appeared only after running the latest update from Apple for Mavericks. I tried running the SMC reset but it still won't charge.

    I had the same issue, when i updated to mavericks my charger stop charging sometimes the light would go orange sometimes green most of the time would be off but charging, i returned to mountain lion as the moment of the reinstallation was complete the charger started working and light was on and now is working perfectly no problem. I guess i will stick with mountain lion for now. I hope this helps.

  • My iphone will not charge after latest update.

    After I did the latest update first my middle button stopped working then the volume stopped working but both were fixed after a restart. Now my phone won't charge I get the message cable not compatible but it's the charger that came with the phone. Please help.

    After a full 8 hour charge it only shows about 40% charge.  This phone worked without incident before the last two firmware updates.  I use the same wall charger and Apple cord for my iPad and wife's phone (she has not updated her phone to iOs 6.0.1) and they all work great.  There must be something in the new update that kills battery life. By the way, I replaced my battery less than a month ago. 

Maybe you are looking for