Galleries/Photos unviewable once published...

Hey Guys,
This stuff is taking me for quite a ride! Finally we got our personal domain launched and linked to our .mac account (after a week and a half of trial and error....), now I have a Galleries Page set up with one completed album for Seniors and the photos won't come up, nor can I click on the photo to be taken to the multiple photo-ed page.
Any idea why this is? I don't think it's a broswer misfunction, but I'm not sure.
Any suggestions would be greatly appreciated!
Our site is:
www.lancehill.com
Thanks!

It loads for me BUT it takes a long long time to load both the Galleries page and the individual images once clicked..

Similar Messages

Photos move from where i place them once published

i've created my site and it's been working great for a couple months. I just added new photos to several pages and they all look fine once published except one page! have tried moving them again in iweb, saving, then publishing again, but same thing - the photos are misplaced and covering text.
any ideas?? thanks!
site is http://www.luminousadventures.com
and then on the "Reiki and Bodywork" page is the problem.
(I haven't figured out yet how to have my url forwarding go to individual pages - that's another question!)

well, I solved my problem with a very low-tech solution: since every time my photos would appear about an inch higher than where I'd placed them while in iWeb (once published), i intentionally placed them an inch lower than I wanted (had to do a bit of adjusting since I was guessing where they'd show up), but it worked!
I still don't know why this is only happening on this one page, when all the others I did the same and they are fine.
here's the results: http://www.luminousadventures.com Reiki and Bodywork page

Photos misaligned on the page once published...

The photos are perfectly placed in the iWeb project. I publish. The photos have moved in their positioning ... I've never seen this happen before. I've remade the page several times. The photos on the other pages are exactly where they should be once published. What might be happening here?
http://lowryolafson.com/lowrysnewcd.com/borderland/the_band.html
Each photo should be lined up next to the name of the performer. They are in the original iWeb project.
B.

This is quite difficult to demo in written text, but you can have image inside a text box and this text box is inside another text box as here:
the red border box is the image, the white border box is the inside text box and the black border box is the outside text box.
You have to copy the image (red border) into the small text box (white border) , then copy the small text box (white border and its image) and paste it inside the large text box (black border), then use text wrap around the smaller text box to have the final effect.
here is the end result: http://test.cyclosaurus.com/imgTT/Blank_2.html
note that this method will allow you to have padding between the photos and the text, there is no other way around it.

How can I delete multiple photos at once from the official Photos app?

Dear fellow Apple users,
I have many pictures on my Camera Roll in Apple's Photos app. What's the quickest way to delete multiple photos at once?
Thus far, I know how to delete photos one by one, but that's time-consuming.
Thank you.

No not box with arrow, that is share button. Edit is where it shows in the pic I posted

How can you get photos back once you have deleted them?

Can anyone tell me if or how you can get photos back once you have deleted them from your ipad2?? I accidentaly deleted some very important pics. Please help!!

iPad Photo Recovery: How to Recover Deleted Photos
http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
How to Restore Lost or Deleted Files from iPad
http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
How to Recover Deleted Files from iPad
http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
iSkysoft Free iPhone Data Recovery
http://www.iskysoft.com/iphone-data-recovery/
Recover iPhone/iPad/iPod touch lost data, Free.
Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
Recover data directly from iPhone or from iTunes backup
Preview and recover lost iOS data with original quality
 Cheers, Tom

In "edit" mode, my movie speed is fine. Once published it seems to slow down and become all jerky. Any ideas? Thanks

In "edit" mode, my movie speed is fine. Once published it seems to slow down and become all jerky. Any ideas? Thanks

I have a revision a imac g5 with the same problem with only macbreak podcast. I know leo laporte said that the podcast was done in 1080p and my computer with its built in 64 megabyte graphics card might have trouble with this podcast but your machine must have a better graphics card than mine. 1080p requires at least 128 megabytes of graphics memory built in. My machine played this podcast on quicktime fine until they came out with the update to quicktime last week or two ago. I was going to upgrade my memory until I came accross your story and your machines doing the same thing with much better specs. I think it might be the quicktime update that is causing a problem. Maybe Leo will talk about this problem since he is doing a mac show about macs.

Some photos won't publish

i am using the Publish service (very cool!) to export photos to a specific location on my hard drive. the process is driven by a set of smart collections, and it all works great.
however, i have a handful of photos that won't publish -- they are sitting in the "new photos to publish" or "modified photos to re-publish" areas and they don't get published when i tell that collection to publish.
the publish service exports in JPEGs.
Some are NEFs, others are JPEGs, one is a PSD. All of the NEFs and JPEGs are virtual copies. the PSD is the original.
any ideas what's going on?

>@LKF: I can get CS3 to open files from LR 2, but it works differently than earlier LR releases. With LR 1.4 when I right clicked to edit in CS3 it gave me a choice of which version of the file to edit. It also paired the .psd file with the original .dng when I finished. Now with LR 2 it doesn't do either. Is this a design feature or is something hosed up.
Bug. Will be fixed in the next (first) update. For a workaround set Photoshop the be the secondary editor in the preferences and use it. If you are unclear on how to do this check here:
http://www.adobeforums.com/webx/.59b66d51/3
If you are really curious you can read a discussion of this and other 'Export to CS3' problems here:
mike beaumont, "Lightroom 2.0 will not export to Photoshop CS3" #1, 29 Jul 2008 12:30 pm
Your specific problem is discussed starting a couple of dozen (or so) messages into the thread.

Lightroom 5.6 When I try to publish the photos from Lightroom to SmugMug I get an error Canceling task at the top left side and the photos are not published. I have published photos before just last week so not sure whats going on. Any help would be great

Lightroom 5.6 When I try to publish the photos from Lightroom to SmugMug I get an error Canceling task at the top left side and the photos are not published. I have published photos before just last week so not sure whats going on. Any help would be great.

See my first post in this topic:
https://discussions.apple.com/message/21371126#21371126
Trashing the preference file may help, as I've outlined in the topic I've linked to. Otherwise, follow the steps regarding removing 3rd party QuickTime components. Also, see the final post by the OP (EEye87) regarding how his problem was resolved (a combination of trashing the preference file and the 3ivx component).
John

URL links do not show once published

Links added in PSM do not show once published. The links lists shows and works in preview but fail to appear in iTunes when published.
Ger.

Links added in PSM do not show once published. The links lists shows and works in preview but fail to appear in iTunes when published.
Ger.

Is it possible to undo the Ken Burns effect on all photos at once in iMovie, rather than clicking "crop" and "fit" on each individual photo?

Is it possible to undo the Ken Burns effect on all photos at once in iMovie, rather than clicking "crop" and "fit" on each individual photo?

Hey Villiam, Kevin is referring to setting a movement on a photo setting keyframes (like zoom out to in), right-clicking on Motion, and choose save as preset. This will put that movement into your presets folder under Effects. I am going to try this on my next montage and see if I can find some efficiencies. Thanks Kevin, that was a great tip!!!
Also thanks to Jim. I spent like 30 min looking at all the keyboard shortcuts. It's a little overwhelming to establish a solid shortcut format that a team of editors can learn and use. I'm going to be trying the FCP short cuts, then go back to the default. It looks like the PR default has a lot of existing and helpful shortcuts assigned already. It's just going to take getting used to a new platform.
I'm still looking for tools and/or methods to allow an editor to assemble a 60 second montage with 10 photos, VO and music in 30 minutes. It's going to be a challenge but I think it's possible with the right innovative process. I'll still challenge anyone to find a way to quickly assemble a montage in an assembly line or template-based fashion using Adobe Premiere CC where there's on-screen text, advanced transitions, timed to VO, etc.
I think I'm dreaming for a tool to automatically do this within Premiere, while I think the answer for now might just be customizing motion presets and creating a favorites folder of transitions that can be dragged onto each clip. I'll see if there’s a way to apply a set of transitions or motion presets to a series of photos on the timeline opposed to doing it one by one. I can see this solution being important as video montages are becoming more popular in our industry, and the faster we can make them using a professional software package like Premiere the more prosperous we will be.

How can I delete ALL photos at once from iPad 1 (OS 5.1.1) ?

How can I delete ALL photos at once from iPad 1 (OS 5.1.1) ?

Weird but I can't see "Photos & Camera" in "Settings / / General / usage".
It's werid because I have pictures on the iPad.
I'm thinknig to complete delete everything and restore system.
Any other suggestions ?

How do you stop auto play only go to next slide on click once published Version 7

How do you stop auto play only go to next slide on click once published Version 7? I mean to stop the play slide bar moving down the bottom?

Thank you, I already have click boxes and buttons on every slide - the slider at the bottom still automatically moves, it doesn't go to next slide until button or box is clicked. I want to stop it moving if possible?
Update: looks like it does the same on the old versions - I'm assuming its the time set to play each slide. I will just even these up so the don't look so inconsistent.

How to delete ALL PHOTOS AT ONCE ?

So, how to delete all photos from iphone 5 with one touch ? Its frustrating to delete pic by pic when you got over 2000 pictures ! And its not enough to go to "moments" and day by day deleting those pics...
My old Nokia 2110 has that luxury feature "select all" and then "delete selected". This is ridiculous from 1000€ device... Not to mention I have new iMac also and I still not can delete all photos at once.
Help please !

If iCloud Photo Library is enabled:
There is currently no way to delete all photos at once.
If iCloud Photo Library is disabled:
Plug your device into a computer and open your photo import application and it'll allow you to remove all photos.

How do I delete all my photos at once?

I transferred all my photos to my computer so I need them off my phone. How do I delete all my photos at once? Help!

One of two ways, install Files; http://www.windowsphone.com/en-us/store/app/files/762e837f-461d-4847-8399-3526f54fc25e navigate to Pictures and delete the photos as needed or reconnect your phone to your computer and delete the photos from there.
If you're synching to One Drive you might get them back.

Quiz navigation fails once published

In a recent Captivate 4 project, I added series of quiz questions throughout the tutorial. For each question the correct answer prompts the "click anywhere or press 'y' to continue" message. During the project preview, clicking anywhere or pressing 'y' allows the user to move to the next slide. However, once published as an .html file only the 'y' key allows the user to move forward.
Any insight on this problem would be most helpful. Thank you in advance.

Thanks for the detail.
Couple things then...
1. 58+ slides is a lot of slides. Can you cut the project into two courses?
2. If you copy the project then delete slide 57 and/or 58, does the navigation work as expected? Maybe it's an issue with just those slides.
3. Do you have the latest version of CP7? (Adobe - Adobe Captivate Support Center : Downloads) - no guarantee but be sure you're working with the latest version.
4. Try actually publishing and testing, ideally from a webserver (or the LMS). Running 'locally' can induce problems that don't manifest when run online, though it seems unlikely in this case.
5. Flash Player version is current, or relatively current? You have installed the version (or better) that is specified in the project's Publish dialog?
6. Try changing the Playback bar you use, just to see if that makes a difference.
7. Related, enable the TOC (in the 'Skins' panel) and try to navigate to/past the troublesome slides that way, just to see if you can even get to/past that slide via a different method (if you can, indicates a problem with the navigation moreso than the slide itself).
HTH!

Galleries/Photos unviewable once published...

Similar Messages

Maybe you are looking for