Gallery doesn't show any images and videos in n73 ...
everything seemed to work fine untill today, i have hard reset my n73 2 days ago using code *#7370# two days ago because of a major problem(i was unable to make or receive calls), everything else works fine but the images and videos are not shown in gallery but i can view images and videos using file manager and by opening individual item. I can see images using another third party software photobook. Please help.
:S,
Sorry, missed that fact. My memory is good, but short.
Try moving the "Calendar Cache" file to your Desktop. Quit iCal, and find the "Calendar Cache" file in your Macintosh HD/Users/yourusername/Library/Calendars. Move that file to your Desktop. After that, (I remember that I recommended this before), as long as you are moving files to the Desktop, repeat the plist removal procedure once again, log out/in or restart.
You should also consider removing the "To Do's" from Mail before restarting iCal. When you open iCal turn off "Show Birthdays calendar" in iCal>Preferences...>General.
Are you syncing any data? If so, what method(s) are you using?
;~)
Similar Messages
-
Aperture 3 Import Dialog Doesn't Show Any Images
Sometimes the import dialog just doesn't show any images. First time I encountered this I had to restart Aperture. But now even that doesn't help.
Screenshot:
http://dl.dropbox.com/u/1250153/a3.png
Any ideas or fixes?Hello qua
You don't say what your source is when your imports have been experiencing problems. Are you importing directly from a camera (or a card in a card reader)? Or are you importing images which have already been downloaded to your hard disk?
I've just completed importing approximately 5,000 images which date back to 2001, across several hundred projects. These have, obviously, been imported from an existing disk-based archive. Every so often, I'd find what you've described - the import window with the source correctly selected, but no preview images. I never worked out a pattern for this behaviour. However, I found dealing with it +for my particular circumstances+ was as simple as pressing <escape> to cancel the import and then immediately beginning the import again. It never failed on the second time around. I never needed (for this problem) to quit and restart Aperture, let alone reboot my system.
The problem I just described was being experienced on a fully patched 3.0.1 system. Of course, you might be experiencing something slightly different...
Regards,
Gary -
My App Store Doesn't Show Any Thing , and not working .
Today I've Noticed that My App Store Application is Not Working , and even I Can't Click On any Tabs ,and all of menu bar items such as sign out,sign in doesn't work . and doesn't Show Loading Status Bar, and doesn't show any message as you see in this picture :
I've Tried There Solutions:
Reset PRAM
Delete App Store Cache Files
Signed Out of Itunes And and signed in again
clear History and web site data in safari
But Nothing Changed .
(Sorry My English is Not Good at all , But i'll be thankful if you help me )Test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Sign in to the App Store by selecting Sign In from the Store menu. If you're already signed in, sign out and then sign in again.
Step 2
Log out or restart the computer.
Step 3
Remove or disable "LittleSnitch" or any similar third-party software that blocks outgoing network connections according to the developer's instructions.
Step 4
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
After testing, restart as usual (not in safe mode.)
Step 5
If possible, connect to a different network and test.
Step 6
There are reports that resetting the PRAM may solve the problem in some cases. I can't confirm. -
Maintenance Wizard 2.20 Not showing any images and Style
We have installed Maintenance Wizard 2.20 on the RHEL 5 linux server, we are accessing the application through IE9 browser. I have completed the browser settings provided by the MW disclaimer. But i couldnt see any images or CSS in the screen. I can able to login and navigate through all the screens.
Please help me in this issue.
SundarHi DB,
The steps for the upgrade itself can also be found in:
Oracle® Applications
Upgrade Guide
Release 11i to 12.1.1
http://docs.oracle.com/cd/E18727_01/index.htm
and depending at the type of OS you need to follow:
Note 761564.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86
Note 761566.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64
Note 761568.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Sun Solaris SPARC (64-bit)
Or in case you have another platform let me know.
Regards,
Ronald -
Crazy iCal - doesn't show any events and to-dos
My iCal is going crazy. It all started with an inspector popup not closing. I clicked on "Done", but it just stayed there. I switched to a different week, it stayed at its position. I closed the window, it disappeared, but when I reopened the popup it was here again.
Then I restarted iCal and it was finally gone. But then even more strange things happened. I was doing some more "intensive" iCal-work. I exported/imported two calendars to merge them with others, I switched some events to different calendars, I edited some events, and did some copy/paste from repeating events (there was a warning message that only a single event will be copied). At some point there was again a strange behavior, I cut/pasted an event, but pasting didn't work. Then I pressd Command-Z to undo the cut, the event reappeared, I copied it and pasted it somewhere else. Then the events started to disappear. First the one I was editing. It was just gone. I switched to the previous week and back, and then no events were there anymore. In the other weeks there were still some (if I remember right), but when I switched to month-view - everything gone. The to-dos were still there. I restarted iCal, nothing, I restarted the Mac, nothing. Now even the to-dos are gone, although I can still see them in Mail.
It gets even worse: The left and right arrow-buttons to switch to a different day/week/month stay pressed when I click them until I click the day/week/month button. I have never seen anything like that before. I can not check/uncheck any calendar, the "today" button is greyed out. When i switch from month-view to day-view sometimes on the top you can still read half of "June 2009" from month-view.
I checked the files ~/Library/Calendars. I think the events are still there, I can view all the events (I think) in Quicklook. Also, the to-dos are still visible in Mail. It must be an iCal problem. After restarting iCal a couple of times the to-dos reappeared.
Any ideas?
[Update:]
Some events just reappered magically, among them the automatically imported birthdays from address book, but the dates are wrong. A friend whose birthday is on May 9th (that's a Saturday this year) appears now every week on Saturday!
Message was edited by: Sebastian300:S,
Sorry, missed that fact. My memory is good, but short.
Try moving the "Calendar Cache" file to your Desktop. Quit iCal, and find the "Calendar Cache" file in your Macintosh HD/Users/yourusername/Library/Calendars. Move that file to your Desktop. After that, (I remember that I recommended this before), as long as you are moving files to the Desktop, repeat the plist removal procedure once again, log out/in or restart.
You should also consider removing the "To Do's" from Mail before restarting iCal. When you open iCal turn off "Show Birthdays calendar" in iCal>Preferences...>General.
Are you syncing any data? If so, what method(s) are you using?
;~) -
Sql developer doesn't show any packages and procedure.
Hi All,
I am perty new here and I am facing a strange problem in SQL DEVELOPER. I have one schema and it has packages and functions created in it, but when I click
packages or functions in sql developer it says table or views does not exist. however, I can see those packages and procedures from sql plus and oracle enterprise manager. you swift reply would be highly appriciated
hare krishna
AlokWhich version of sqldeveloper?
Which version of Oracle?
This sounds like an old bug where sqldeveloper checked for 'select any table', but you actually need 'select any dictionary' -
Firefox verson: 9.0.1
Google Toolbar version:
I've tried two fixes:
1. Went to Firefox Profiles at AppData >Roaming > Mozilla> Firefox > Profiles > Default Profile > Extensions and look for the directory where the Google Toolbar is installed. Mine is located at {3112ca9c-de6d-4884-a869-9855de68056c} directory.
Changed the maxversion to 10. Find this line <em:maxVersion>4.0.*</em:maxVersion> to <em:maxVersion>10.*</em:maxVersion>\
2. Went to Lib dircotry and opened up the file toolbar.js with a text editior and replaced all www.google.com/accounts WITH: accounts.google.comYou can turn off compatibility checking, but more and more of the Google Toolbar will not work. Google is no longer supporting the Google Toolbar so you should use the alternatives.
Hi Mark,
See http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
If you have an aspect that is not covered, indicate what that is; otherwise, expect you to be fully functional within 1-2 weeks.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
E5 memory card images and videos are not visible i...
am using nokia e5,it was working all well but few days before i tranferred files from laptop to my cell(images) using Mass Storage option by data cable.soon after that images and videos saved in memory card is not visible on phone.test mesgs and music files are visible but phone isnt showing my images and video files which ive recievd through bluetooth and saved in memory card.why is this so???plzzz help me am in mess cant help it
Hi saaraaz,
Welcome to the forum! I tried to transfer pictures via bluetooth and they were saved to gallery like they should. Please try the following actions and between them test if it works.
Firstly please make a back up with Nokia Suite. Then type in *#7780# = soft reset, no data lost.
If it's still the same, type in *#7370# = hard reset, the phone memory will be wiped. Restore back up. You can also try to make the back up without settings and then format and restore.
Reinstall the software. The process is the same when updating, but at the end select "reinstall".
Hope you get the device working again, please let me know if this is not the case.
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated. -
How to set restriction on shared folder to copy or move images and videos
Hi,
I am using windows server 2008 for file sharing, it's simple folder sharing and there is no additional roles added and not promoted as file server.
Users have permissions to access folder and they can put data on shared folder but I want to restrict user that they can not copy any images and video on it.
Need urgent help to stop copying images and videos on shared folder.If you need to restrict only certain types of files, then file screening is what you need. Windows Server 2012 R2 comes with a powershell module for FSRM, so you can script configuration of file screening.
The code will look like the following (this is only an example):
New-FsrmFileGroup -Name "Images and Videos" –IncludePattern @("*.jpg", "*.mpg", "*.avi", "*.tif", "*.mp4", "*.mov")
$Notification = New-FsrmAction -Type Email -MailTo "[Admin Email];[File Owner]" -Subject “Warning: attempted to create a video or image file” -Body “You attempted to create a video or image file on a share that does not allow storage of this type of files.” -RunLimitInterval 120
New-FsrmFileScreen -Path "C:\Shares\FileShare1" –IncludeGroup "Images and Videos" -Notification $Notification -Active
Gleb. -
Switch doesn't show any log when AC is put in back.
I'm using two kind of switches i.e Cat2960S-24TD-L and Cat2960S-48TS-L with RPS2300 for backup power.
One question was raising in my head during the power redundancy test on the switches.
My question is how NMS can recognize that AC power is put in back as normal status without any log.
Each switch has two power sources. One from AC built-in power and the other from RPS2300 as below.
Access_SW#show env all
FAN is OK
TEMPERATURE is OK
Temperature Value: 39 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 50 Degree Celsius
Red Threshold : 60 Degree Celsius
SW PID Serial# Status Sys Pwr PoE Pwr Watts
1 Built-in Good
2 Built-in Good
SW Status RPS Name RPS Serial# RPS Port#
1 Active RPS1 FDO1447YGT3 3
2 Active RPS1 FDO1447YGT3 6
~snipped~
DCOut State Connected Priority BackingUp WillBackup Portname SW#
1 Active No 6 No Yes <> -
2 Active No 6 No Yes <> -
3 Active Yes 6 No Yes Access_SW 1
4 Active No 6 No Yes <> -
5 Active No 6 No Yes <> -
6 Active Yes 6 No Yes Access_SW 2
When I pull out the AC power cable out from the switch, it shows the proper log saying as below.
Access_SW#
Jul 8 17:15:46 UTC: %PLATFORM_ENV-1-PWR: Internal power supply not supplying power (Access_SW-2)
Access_SW#show env all
FAN is OK
TEMPERATURE is OK
Temperature Value: 39 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 50 Degree Celsius
Red Threshold : 60 Degree Celsius
SW PID Serial# Status Sys Pwr PoE Pwr Watts
1 Built-in Good
2 Built-in Unavail
SW Status RPS Name RPS Serial# RPS Port#
1 Active RPS1 FDO1447YGT3 3
2 Active RPS1 FDO1447YGT3 6
~snipped~
DCOut State Connected Priority BackingUp WillBackup Portname SW#
1 Active No 6 No Yes <> -
2 Active No 6 No Yes <> -
3 Active Yes 6 No Yes Access_SW 1
4 Active No 6 No Yes <> -
5 Active No 6 No Yes <> -
6 Active Yes 6 Yes Yes Access_SW 2
But I put AC power cable back into the switch, it doesn't show any log and any change to me. It still shows 'Built-in is Unavail' as below.
Access_SW#show env all
~snipped~
SW PID Serial# Status Sys Pwr PoE Pwr Watts
1 Built-in Good
2 Built-in Unavail
SW Status RPS Name RPS Serial# RPS Port#
1 Active RPS1 FDO1447YGT3 3
2 Active RPS1 FDO1447YGT3 6
~snipped~
DCOut State Connected Priority BackingUp WillBackup Portname SW#
1 Active No 6 No Yes <> -
2 Active No 6 No Yes <> -
3 Active Yes 6 No Yes Access_SW 1
4 Active No 6 No Yes <> -
5 Active No 6 No Yes <> -
6 Active Yes 6 Yes Yes Access_SW 2
The problem is how the operator can decide 'Now AC power is okay so I will push the button on RPS to make it backup again' without getting any information from the switch.Hi innetee9228:
If the output of "show env all" doesn't change when you put the AC power back in, that's indicating a bigger problem. You see the %PLATFORM_ENV-1-PWR: message go when the power comes out, so there should be one when the power goes back. That's more indicative of an IOS problem where the status isn't getting updated as it should.
The SNMP agent rides along side the guts of the IOS that feed the SHOW commands. If the hardware isn't reporting correctly or whatever and "show env all" doesn't tell the truth, it's not likely that the SNMP agent is going to be receiving truth, either.
Once you have that addressed, you should be able to turn up power supply event traps and send them to whatever SNMP Manager you'd like, and have that alert your operator.
nms-6506-e(config)#snmp-server enable traps envmon supply ?
fan Enable SNMP envmon fan traps
shutdown Enable SNMP environmental monitor shutdown traps
status Enable SNMP environmental status change traps
temperature Enable SNMP environmental monitor temperature traps
nms-6506-e(config)# -
My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.
Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands. -
E71 Gallery Images and Video Clips
Hi there,
last night I discovered that I am now no longer able to view any images or video clips in Gallery. I had taken some photos over the past few days in various conditions to test the camera out. I went back in to review, which I was able to do only days earlier and now it just sort of hangs and no images are displayed. I can exit out, but it wont show even the preinstalled images. The same thing happens with video clips.
Has anyone else came across thie problem and/or have a solution?Nokia phones are unable to play MP4 files, or any other video file with the exception of Real Video files. The video file MUST be packaged thru Real Player. 1 of 100 MP4 files will play, but typically the phone CANNOT even see that the MP4 file is on your memory card.
The issue is a problem with the firmware on the phone, You can view the MP4 files on all phones and all computers, but not Nokia. Nokia is history, yet they keep building phones that look new and have new features, but they only work with antiquated files formats. Furthermore
the features that actually work are typically crippled by patent infringment issues.
The Nokia suite will not work with windows. Typically Nokia suite will open and freeze. Again a software issue totally ignored by Nokia, because selling a new phone is not contigent on making all the features work. They proudly list the features on the package, but for the most part the features you paid for are not going to work correctly, and most often not at all.
To get a video file to to work on the E71, your best bet is to take the loss, throw the phone in the garbage and by a different brand. If you insist on getting videos to play on the E71 disaster, make sure to run your files thru Real Player and convert to a '.RV' file. The format is ancient, but they will work most of the time. The file size is massive compared to todays standards as well, so buy a massive memory card, but remember the E71 has a tiny limit of 8 gig. You can then use file manager on your computer to transfer the files to your memory card on the phone. DO NOT try to use nokia software with Windows to transfer files, simply put, you will waste hours, and in the long run it will work about 10% of the time at best.
Nokia has been on the brink of bankruptsy for a while, and it will not be long now. -
I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.
Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane. -
Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?
Many users have solved the problem by syncing several times; and if that doesn't work, perform a simple restore. Your titles will come back.
-
The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted. The only problem is with Lollipop.
PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
The audio file formats which fail to stream are: mp3 and wav
The video file formats which fail to stream are: mp4, avi and 3gp
JPEG Images appear to work fine, but I haven't tried other formats.
I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
Any ideas?Hi juicespeare1,
Welcome to the Sony Community!
Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
If my post answers your question, please mark it as "Accept as Solution"
Maybe you are looking for
-
I'm looking for a Braille note system that interacts with IPAD. This will be use in a classroom settings where you see both the braille & text communicated simultaneously.
-
How is Last Played calculated?
A song has to play right through before Date Played is changed (I know this because I've watched it happen). However, a little while ago I put a song on pause right at the start in order to watch TV. When I came back to it, the song was still on paus
-
Commercial Printer Recommendations?
I hope this is not an inappropriate question for this forum. I apologize in advance if it is (and if so, and an administrator is welcome to remove this post). I need to send (8) 8.5X11 final trim, 4/4 brochures to an offset printing press. There will
-
How to exclude a table when doing dbcc checkdb
when running dbcc checkdb(mydb). it will go through all tables. Is it possible to exclude a table from dbcc checkdb?
-
I am never able to load java applets in Mac OS X Tiger? Can anyone help me out? I am writing some Java Applet and am unable to test it on my apple laptop at home, as opposed to my linux box which is not at my disposal currently.