Gallery not opening...tried everything.

Called the Samsung help line and the person I dealt with had no idea how to help. I only have a few apps and a couple pictures. I also have a 16 gig simcard so not enough room isn't the issue. My only guess is the phone either stopped seeing the simcard, or one of those updates corrupted the drive somehow. If this has happened to two of us I'll bet it is a wide spread issue.

    Let's work on a plan to resolve the issue Justinisnthappy! Please provide specifics of the issue you are experiencing, including your phone model and software version. Also, when was the last time everything worked fine? Did issue start after installing a particular application or software update?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

Similar Messages

  • My i photo version 9.2.3 does not open. tried everything

    My I photo version does not open. Tried everything.

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you see when iPhoto tries to open?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    Happy New Year

  • I can not open itunes store the lines goes along but does not open tried everything stuck now i am on the up to date i tunes any answers

    i i can not open i tunes store  i am up to date with i tunes window etc it just will not open is there any one who nows thanks lynn

    Hi Lynn from Kettering,
    I'm assuming you are in Dayton Ohio.  I grew up in Centerville,  Anyways read through this link.  I hope it helps
    https://discussions.apple.com/message/16017192#16017192

  • Itunes not opening tryed everything

    well my itunes is not working like every one else.
    I have tryed most of the solutions that i have seen and understood but none have worked and i dont have norton inernet sercurity so its not that
    any soultions or help would be awesome!
    thank you!

    hi ky!
    When I open the Task Manager processes Quicktime .exe opens and runs; but itunes.exe just hangs there.
    let's see if this actually
    b works
    as a diagnostic technique.
    okay, if itunes.exe is persisting in your Task Manager
    b and
    you've got Norton Internet Security 2005, let's try the "Lorraine" technique:
    Lorraine M, "NIS/i-tunes problem rectified" #2, 12:51am Oct 17, 2005 CDT
    ... but if you're not running Norton (or some different Symantec firewall), let's try this one:
    http://docs.info.apple.com/article.html?artnum=302386
    keep us posted.
    love, b

  • ITunes will not open, tried everything- unusual case

    I had a older version of itunes working perfectly on my computer. Then I bought a slvr l7 and loaded the newer version of itunes. Now it wont open and displays the typical iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. Below is the error signature. I have the service pack 2 installed but I have my firewall turned off completely. I have tried both the cd version and downloading and installing the version off this site. Both yield the same results. Thanks in advance for any responses.
    Error signature
    AppName: itunes.exe AppVer: 6.0.1.3 ModName: quicktime.qts
    ModVer: 7.0.4.80 Offset: 000346f0

    Itunes has encountered a problem and needs to close
    the first thing that i check for when people report getting that message when they try to launch their itunes is a broken or missing QuickTime. (itunes needs a fully functional QT in order to work properly.)
    try to open your QuickTime. does it launch properly? or do you get an error message, or some other peculiar behavior, or find that it isn’t on your PC at all?
    if you get an error message (or peculiar behavior, or find that it’s missing), the first thing we'll try is a careful standalone QT 7.1 reinstall.
    download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1 Installers … get the one that doesn’t mention itunes 6
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

  • Photo Gallery not opening

    << Branched from an old discussion about photo gallery not opening >>
    I had a similar problem, only it was because i was in the phone deleting files that i thought i didnt want. UGH! I think mine was due to facebook and not syncing. My gallery would work, but the widget on the homescreen seemed frozen and when i tried to look at picture thru it, it said there was an error.
    I deleted facebook and then installed it again, somehow, getting better updates. I also took the widget off the homescreen for a little bit. After a reboot of the cellphone, and an update of facebook and new SYNCS, suddenly it is working again as it once did.
    I did NOT want to do a hard reset, it took along time to tweak my settings as i wanted them, so i opted out of it.
    Hopefully you have better luck than i did. It took me like a week to figure houw i was going to go around doing a hard reset.

    sorry, i forgot to say my firmware version is v3.0638.0.0.1

  • Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

    Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

    IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

  • Firefox will not open,tried running profile manager but I receive a small window with the word :dialog" in it.

    Firefox will not open.Tried uninstalling and reinstalling program without any success.
    Tried running profile manager,but a small screen shows up with the word "dialod" in it.
    Any assistance appreciated.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB0.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; .NET4.0C; Tablet PC 2.0)

    Can you provide us a screenshot?
    Vista/7
    Go to Start and type in Snipping Tool then provide a screenshot ,save it, and upload it to any of these file uploading websites.
    [http://www.imageshack.us ImageShack]
    [www.mediafire.com MediaFire]
    [www.kimag.es Kimages]
    XP
    Press '''FN + PRT SC''' on your keyboard to take a screenshot and Press '''CTRL + V''' in Paint to paste it and save it and upload it.

  • ICloud for pc not working tried everything

    iCloud for pc not working tried everything ( uninstall - reinstall - delete files - old versions ) nothing helps it just downloads a couple of photos and off again my iPhone uploads perfectly as all the pics goes to the iPad seamlessly, Please Help i'm on windows 8.1 x64, Thanks

    I think that the card reader may in fact be defective, but it just doesn't make sense if I have already used it fine before. I've tried everything on this Apple support page, thank you though.
    Does anyone have any suggestions?

  • Flash 9 Does Not Work- Tried EVERYTHING

    I tried everything from uninstalling, using the standalone,
    deleting registry keys, using the ocx files, EVERYTHING. I'm tired
    of "This is the answer" posts on internet, which did not work for
    me, even though I follow the direction word-for-word.
    Anyone else share the feeling?
    I can't use anything- youtube, aim....
    i think i'm going suicidal.

    Try this first: Instructions for uninstalling and
    reinstalling the Flash Player:
    1. First download the uninstaller to your desktop from here
    http://www.adobe.com/go/tn_14157
    2. Before running this uninstaller be sure to read the
    instruction and close all running programs.
    3. Open the following folder
    C:\WINDOWS\system32\Macromed\Flash
    4. Run the uninstaller
    5. What files are left in this folder?
    C:\WINDOWS\system32\Macromed\Flash
    6. If there are files left, delete the Flash folder.
    7. Install the Flash Player from here:
    http://www.adobe.com/go/getflashplayer
    8. Test the Flash Player here:
    http://www.adobe.com/products/flash/about/
    If the Flash Player did not install properly, there may be a
    permissions issue within your Windows Registry. Please login as the
    Administrator (NOT a User with Admin privileges) and follow these
    instructions to open the registry.
    Warning: The following solution involves the Windows System
    Registry. Editing or manipulating the registry incorrectly can
    result in serious system damage which may require re-installation
    of the operating system. If you are not comfortable editing the
    registry, then take your system to a professional. If you choose to
    proceed, then it is essential that you create a complete system
    backup and a Windows System Restore Point before proceeding. Adobe
    Systems cannot be held responsible for damage resulting from this
    information.
    1. Select Start > Run
    2. Type in “regedit”
    3. Right click on HKEY_CLASSES_ROOT
    4. Select Permissions
    5. Select Advanced
    Compare your permissions with the ones in this screenshot.
    Reply with any differences that you see.
    http://www.supportflash.com/vista_key.png
    Please do not use Microsoft’s SubInACL took unless you
    know for sure that the system registry permissions is the issue.
    SubInACL has been used on Vista successfully, but if you need to
    find out more information, like is it officially supported on
    Vista, please contact Microsoft.
    http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e39 27b&displaylang=en

  • ZEN Sleek photo not recognized tried everything HEL

    i bought my zen photo sleek today, the software installed, the device was recognized. I started transferring files which stopped at file 97 and didn't do anything. I clicked cancel which made the tranfer window freeze and not respond anymore. Task manager didn't open so i rebooted my computer. After this the device wasn't recognized anymore. since then i've tried EVERYTHING i could find on this forum but failed. all setting seem to be ok, i reinstalled al the software twice, downloaded the hotfixes etc. nothing works. I mailed customer service and am wiating for a reply, anyone any ideas in the meantime ?

    general_tomorof wrote:My firmware is version .0.0eaifaik, for the zen sleek photo there is no v2.xx..the release was only few weeks ago, so the firmware is very new and maybe not full functionable on all pc's.and it is not possible to update your firmware without connection to your player..Edit: i already installed WMP0
    Apologies, I just noticed this was a Sleek Photo, rather than the original Sleek.
    I'm guessing the Sleek Photo must be PlayForSure, so for some reason Windows is not picking up the MTP device driver. You can try forcing Windows, through Device Manager, to look in the directory C:\WINDOWS\INF where the MTP driver information is located.
    Failing that, have a look at the link "problems with connecting using MTP firmware" in the FAQ post.

  • IPhone 4 will not restore - TRIED EVERYTHING

    So I have a multitude of issues with my iPhone 4 and after trying a multitude of fixes that I could find, no change.
    Here are the issues I'm currently facing:
    - iPhone will not turn on whlie NOT connected to power source
    - When connected to computer, iPhone will display apple logo then switch off then back again continuously
    - I can put the phone into recovery mode (with itunes logo and cable display on screen) but am unable to put into dfu mode (I've tried everything)
    - when put into recovery mode, iTunes will recognize a general iPhone 4 connection and prompts to initiate a recovery
    - iPhone only registers with iTunes not with computer
    - Recovery yields either error 21 or error 3194
    I have tried:
    - Tinyumbrella: iPhone shows up under "Recovery Devices" with a question mark and a series of random numbers
    - altering host file
    - all manner of restore in iTunes
    Is there ANYTHING else I can do to fix this **** thing?

    What I would do is run an anti spyware scan / anti virus scan with the iPhone connected to the computer. This way all of your files from both an be checked. It sounds like you have a Trojan that often causes computers of any type to force a shutdown and go into a reboot mode. My guess is you might have had this occur recently on a computer you linked to. If not it may have come from a shareware program or a download you've recently installed. You can down load all of your iPhone files to your computer, run the scans, disconnect your iPhone before file deletion sir scrubs , reset to company settings/ default mode then plug it back in so you can re download your files once they've been scrubbed. If this doesn't work try to disable the location off mode and redo everything again. This way your privacy settings might block or scramble the malware or virus that's tracing your device through your computer. This is the best advice I have. Web root Spysweeper will destroy anything and use a full based line antivirus program. If you connect your device to a work computer chances are it came through an email while it was connected. At any rate good luck and this is the best home remedy I can come up with. iPhones aren't supposed to be inflicted because they don't run on most active x programs, but if a file you're using does that may be your intersection point.

  • Ipod nano, I can see it in windows but not itunes, Tried EVERYTHING!

    Please help.
    Starting a few weeks ago my six month old ipod stopped being 'seen' by itunes. I can see it on explorer no problem. I have followed all the steps in the support pages, apart from re-installing windows.
    However I have found it doesn't work on my main computer of either of my two laptops, which makes me thinks its an ipod problem NOT a computer/windows problem.
    I have a shuffle which is working fine on itunes on the same computers.
    The only thing I cannot do is restore the nano - because you need an itunes connection to do this.
    Can anyone help please?
    Ipod Nano.   Windows XP   itunes 7.02.16

    At least I'm not alone in this problem...
    I'm in the same boat. My Nano did work with iTunes 7 for a while. The only glitch was that it couldn't update the iPod's software. Since it stopped appearing in iTunes a few weeks ago I've tried everything I can think of (except sending it away) to fix the problem (restart/reset, reinstall iTunes (6 & 7), check services, format comp., change drive letter, etc...). It won't appear in iTunes on other computers either. Further I've run the iPod diagnostics and everything gets a green light. Hardware, software, me? I haven't a clue as to what the problem is. Argh.
    I like the music on my iPod but it would be nice if I could listen to something different! I'll have a chance to stop by the store it came from soon but in the mean time...does anybody out there have ideas?

  • Folder Actions will not work - tried everything

    Recently Folder Actions simply stopped working on 10.6.4. They worked fine before then recently just stopped working.
    I've tried everything I can think of, including:
    1. completely removing enabling & disabling & enabling folder actions through the setup app.
    2. trashing folder actions plist files in user domain and relaunching
    3. disabling related launchd processes with lingon
    4. trashing launch agents in user domain and also trying to unload them in terminal
    5. trying to kill the folder actions dispatcher process in activity monitor (just relaunches, as it should)
    6. emptying system caches including dyld shared cache using cocktail
    7. doing most of the above and restarting
    It's driving me nuts. Any other ideas?
    here's some entries from syslog:
    8/2/10 9:31:37 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 6 seconds
    8/2/10 9:37:29 AM Folder Actions Setup[4403] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
    8/2/10 9:43:37 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.enabled[309]) Exited: Killed
    8/2/10 9:46:23 AM [0x0-0x3a03a].com.apple.systemevents[360] com.apple.FolderActions.enabled: Already loaded
    8/2/10 9:52:07 AM Folder Actions Setup[1083] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
    8/2/10 9:52:16 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 7 seconds
    8/2/10 9:53:02 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 1 seconds
    8/2/10 9:56:18 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 10 seconds
    8/2/10 10:00:58 AM Folder Actions Setup[2190] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
    8/2/10 10:01:01 AM com.apple.FolderActions.enabled[2236] launchctl: Error unloading: com.apple.FolderActions.folders
    8/2/10 10:01:30 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 10 seconds
    8/2/10 10:01:42 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 9 seconds
    8/2/10 10:05:03 AM sudo[2622] lryter : TTY=ttys000 ; PWD=/Users/lryter ; USER=root ; COMMAND=/bin/launchctl unload -w /Users/lryter/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
    8/2/10 10:10:25 AM Folder Actions Setup[676] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
    8/2/10 10:10:27 AM com.apple.FolderActions.enabled[680] launchctl: Couldn't stat("/Users/lryter/Library/LaunchAgents/com.apple.FolderActions.folders.plist"): No such file or directory
    8/2/10 10:10:27 AM com.apple.FolderActions.enabled[680] nothing found to unload
    8/2/10 10:10:38 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 8 seconds
    8/2/10 10:13:17 AM sudo[943] lryter : TTY=ttys000 ; PWD=/Users/lryter ; USER=root ; COMMAND=/bin/launchctl unload -w /Users/lryter/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
    8/2/10 10:14:01 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 4 seconds
    8/2/10 10:14:14 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 1 seconds

    I finally go Folders Action to work, after being unable to use it even for a simple beep for years now.
    Here is what I did:
    1. Changed permissions to 755 for the following folder and two contained files (note that 775 didn't work for me)
    ~/Library/LaunchAgents/
    ~/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
    ~/Library/LaunchAgents/com.apple.FolderActions.folders.plist
    2. Changed the following lines within ~/Library/LaunchAgents/com.apple.FolderActions.enabled.plist (using TextWrangler)
    from:
    <key>OnDemand</key>
    <false/>
    to:
    <key>OnDemand</key>
    <true/>
    Prior to the permissions changes within #1 above, the value of <true/> kept getting changed back to <false/> by something in the system... and though
    there was improvement by the permissions changes, the following console message appeared until false was changed to true.
    com.apple.FolderActions.enabled[4127] launchctl: Error unloading: com.apple.FolderActions.folders
    At this point true is staying true, and not being changed by unknown forces to false, and the above message is not appearing.
    3. The only other thing I did prior to #1 and #2 above, was to run the script (unsaved),
    tell application "/System/Library/CoreServices/Folder Actions Dispatcher.app" to tick
    This little tell line caused something to occur where my Folder Action surprised me and worked for the first time though it took about 30 seconds and was erratic,
    sometimes performing, sometimes not, though if I would do move something into the folder to trigger the action that should occur, and did not occur, then at the point
    running the above tell line or script would cause the action to occur.
    4. At this point I don't fool with the tell line or script from #3, and it seems that systemevents has gotten involved, as well as launchd, and with my simple Folder Action script
    I'm getting the folder action within 10 seconds compared to 30 to 45 if ever seconds.
    5. This is still too early to tell if this is the wonder pill I've needed since Leopard, and now Snow Leopard (and maybe Tiger as well: I forget when I even tried Folder Actions).
    There was a time when I moved things around, so that the items normally found in the former AppleScript folder, were placed elsewhere in subfolders, so I don't know if that lead to this...
    because I could get Folder Actions to work on Macs in the Applestore, but not my own Mac. Watching the console messages was helpful. I don't think it's a big concern that
    deprecated messages are found sometimes. That's a just a normal part of the constantly rebuilding of things that goes on. It's more like a reminder that we've got an upgraded
    OEM part were going to start using, and the older part won't be available after such and such date, so program accordingly, and in the meantime drive.

  • Itunes wont open - tried everything, help!

    I have installed the new itunes and now it wont open, i've uninstalled it, reinstalled it, installed new versions etc.
    Anyone got any advice?

    I got this from somewhere else in the communities -- and it worked! Here it is just as the person who posted it .
    +Hi People, thanks for your help. I had the same problem. After being prompted to update to iTunes Ver. 9.1 I went ahead and let it automatically update and install iTunes and Quicktime. After updating to Ver. 9.1, iTunes would not open or run on my Windows XP system. It would show up in "processes" as a running program but would not show up on my screen.+
    +After reading your discussion about how Bonjour would interfere, I tried to uninstall it. It wouldn't uninstall because it is using one of the processes. I tried quite a few things including completely uninstalling all Apple programs and reinstalling iTunes. I manually uninstalled Bonjour. No luck!+
    ++Here's what you need to do. After reinstalling iTunes, Navigate to the Program Files\ Bonjour+ folder and rename this folder Bounjour.Old. Restart the computer. Bounjour service should not now show up as a service in Administrative Tools\Services. DELETE the Bonjour.old folder. THEN go to Control Panel - Remove Programs and REMOVE Bounjour. It will now uninstall sucessfully.+
    +After doing this iTunes started right up, loaded all my old settings, and recognized my iPod just like normal. Hooray and good luck.+

  • Adobe/Acrobat PDF documents will not open, tried community suggestions, version 9.4.4.235

    Assorted websites may refer to links for documents to open, but I receive an error message stating that the Adobe/Acrobat loaded will not open them, I have tried all of the community suggestions to no avail

    Click the Firefox button, go to Add-ons, then Plugins and disable the following.<br><br>
    #Fun Web Products<br><br>
    #My Web Search Plugin<br><br>
    #Smiley Central<br><br>
    For the above three, see: http://www.pchell.com/support/mywebsearch.shtml
    In addition, disable the Yahoo ActiveX plugin.
    ActiveX is a Microsoft technology which is frequently targeted by criminals. Although the technology is reasonably safe when running inside Internet Explorer, it potentially exposes your system to attack when installed in Firefox.
    You do not need it to access Yahoo in any event.
    If the problem persists in spite of the above steps, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.
    '''N.B.''' You do not need to run "Hijack This" as described in the link since Firefox provides the option to disable plugins as mentioned above.

Maybe you are looking for