Gallery Poster template gives fabulous results

I have been playing around with Pages 2 for the past couple of weeks, for the most part somewhat frustrated with the deceptively simple interface that depends on a lot of "tricks" to getting to various functions--this has sent me to the manual a lot. I never used my Pages 1 very much at all (I mainly got frustrated dealing with text overflowing the pages and producing weird page breaks), and was hoping Pages 2 would be a little more useful.
On short notice this weekend, I was faced with coming up with some decor for a booth at a horse show. I decided to try the large Gallery Poster template since it looked pretty simple. I increased the size of the layout to Super B (tabloid) paper (the biggest my HP business class printer can handle) and proportionally increased the size of the photo and text, and "picked up" the colors for the text from the darker colors in the horse pictures.
I was blown away with the results coming out of the printer. These posters take just minutes to lay out, and look like something from a professional design house.
The new templates alone were worth the upgrade.

Hullo Anne;
The templates do somewhat explore the true potential of Pages. However, besides producing results, they can also give you insight into what the program can really do.
By all means try ringing variants on the templates you care to use; but by no means underestimate what you can do beginning with the blank one.
Pages represents a new generation of creation and presentation software.
Remember this, and also its practically limitless "undo" facility, and you can freely experiment to discover what it can do for you.
If you tie yourself in knots, in the process, remember there is always this forum, in which others are embarked on the selfsame process of exploring its potential - and navigating its shallows!
Regards.

Similar Messages

Custom Content Presenter Template gives Empty result

Hi All,
I am Using Jdev 11.1.1.6 and am trying to display UCM content via a custom template using content presenter.
I have a page with the following:
<af:region value="#{bindings.doclibcontentpresenter1.regionModel}" id="r1"/>
The bindings for the content presenter taskflow:
<taskFlow id="doclibcontentpresenter1"
taskFlowId="/oracle/webcenter/doclib/view/jsf/taskflows/presenter/contentPresenter.xml#doclib-content-presenter"
 activation="deferred"
 xmlns="http://xmlns.oracle.com/adf/controller/binding">
 <parameters>
 <parameter id="taskFlowInstId" value="${'photo'}"/>
 <parameter id="datasourceType" value="${'dsTypeQueryExpression'}"/>
 <parameter id="datasource"
 value="#{backingBeanScope.NewsBean.photoContentQuery}"/>
 <parameter id="templateCategory" value="${''}"/>
 <parameter id="templateView" value="${'templates.photos.list'}"/>
 <parameter id="regionTemplate" value="${false}"/>
 </parameters>
</taskFlow>
And the photoContentQuery bean method return result of the Query i.e SELECT * FROM ora:t:IDC:GlobalProfile WHERE ora:p:xRegionDefinition = 'PHOTO_REG_DEF' AND ora:p:xArchiveFlag<>'No' ")
I have a fragment with the portal resource attributes set as:
Category name = Default Templates
Category ID = oracle.webcenter.content.templates.default.category
Category Default View = true
View ID = templates.photos.list
The above fragment has this code: I also made this fragment has portal resource.
<dt:contentListTemplateDef var="nodes">
 <af:panelGroupLayout id="pnlContainer" layout="vertical"
 >
 <af:iterator id="pagList" value="#{nodes}" var="node" >
 <af:panelGroupLayout layout="horizontal" rendered="false">
 </af:panelGroupLayout>
 <af:panelGroupLayout id="pnlContent" layout="vertical">
 <dt:contentTemplate node="#{node}"
 view="template.photo"
 nodesHint="#{nodes}"/>
 </af:panelGroupLayout>
 </af:iterator>
 </af:panelGroupLayout>
</dt:contentListTemplateDef>
and
<dt:contentTemplate node="#{node}"
 view="template.photo"
 nodesHint="#{nodes}"/> this is another pagefragment contains the following code.
<dt:contentTemplateDef var="node">
 <af:panelGroupLayout id="pgl2">
 <af:panelGroupLayout id="pgl1" layout="vertical" styleClass="photoImg">
 <af:outputText value="#{node.propertyMap['PHOTO_REG_DEF:PHOTO'].asTextHtml}"
 id="ot1" escape="false"/>
 </af:panelGroupLayout>
 </af:panelGroupLayout>
</dt:contentTemplateDef>
When I run my project on the Integrated WebLogic Server and when I click on my page, the data is coming empty.
When I see the Administrator console, this content presenter template is in Hidden by default. I just edit the template and made it availabe. But still am unable to get result in the required template.
On my page, if I do not specify the <parameter id="templateView" value="${'templates.photos.list'}"/>, then I will get the result with default content presenter template.
Could any one please help me out?
Thanks
Kotresh

Hi,
I am able to get the result with required custom content presenter template. But every time when I run the project , I need to explicitly need to make it "show" my custom content presenter display template i.e. in the Administration console, initially it is in Hidden state, I need to edit and make it show.
I already made this template as portal resource but why it is still be in Hidden state. what extra step do I need to make in order to move it to "show" state?
Thanks
Kotresh

Line level remarks for Posting Templates

We have a client that would like to add line level remarks to their posting templates so the resulting journal entry lines have the appropriate remarks defaulted.
When the posting template is selected within a journal entry the line level remarks would default in the same manner as the GL Account, Project, Profit Centre etc.

Naimesh;
Thank you - this one is now solved.
I didn't understand what you were saying at first, but I just looked at VBPA with SE16N, and now I understand what you are trying to say.
To help those out in the future, what Naimesh is saying is that the record for line 10 didn't really exist in my first example and thus is "referenced". Here is a better example with 3 lines and their VBPA records for the same order number:
3695 YC 200346 24358 US D
3695 10 YC 200156 24156 US D
3695 30 YC 202617 26691 US D
As one can see, there is no line 20. Thus, when the header changes, it "changes " line 20 in appearance because the screen pulls it from the header because the line-level record does not exist. So, all I have to know is whether the record really exists or not and thus "track" the change. I will have to add some type of indicator to my records to indicate if the record is really there or not.

P/L A/c for a single day gives different results for different users

Hi!
     We have SAP B1 8.81 (PL 09) in our office. P/L Account for a particular date gives different value for a single account (Other Income Account) for one user and a consistent value for all other users. The user in question is a super user and does not seem to pick a specific entry posted in the Other Income Account for that day thus giving erroneous result. I have checked the Trial Balance for that day and it gives proper result. Only the P/L account gives erroneous data. Could anyone help with the reason for this.
Thanks
Sreekumar

Hi Jitin,
          Thanks for your reply.
          I tried the way you mentioned. However, the result is the same.
          The entry that I'm talking about is an automatic journal entry posted through the Outgoing Payment option.
          To make it more clear, an outgoing payment to a vendor was posted on 05/19/11 for 1,42,178.32. The check was drawn only for 71,089.16 which was the correct amount and the remaining amount (71,089.16) got posted in the Other Income account. The P/L account for this date is not picking the amount of 71,089.16 in the Other Income Account.
Thanks & Regards
Sreekumar
Edited by: Sreekumar on Jan 31, 2012 5:58 PM

Posting template

Hello,
I am new to SAP b1 and i got stuck in the Finicial module..where i made a Posting Template and trying to use that template in the
Journal Entry..Templates but when i try to add the J/E its show me the error..which is
message- 131-20 "Enter valid currency code"
pls help ...
Gaurav

Hi Gaurav,
When you define a posting template, it is defined for LC & SC.
In your case, when you defined a template, you defined percentages.
Now when on JE, you can see Display in FC and display in SC.
You were getting the error message because you were trying to enter value in the FC column. Just un-check Display in FC and populate the value in LC field, This would not give you any error message.
Thanks,
Joseph

[solved]lspci gives strange results

I just reinstalled, and am trying to get my wireless card up and running. I ran lspci, then lspci -nn, and it gives unexpected results. Instead of listing things like vendors and such as intel, and ralink, it just lists non-useful stuff in a format like this:
xx.xx.x Class [xxxx] Device [xxxx:xxxx] rev 40
(where all x's are digits)
what does this mean? where is the useful information that I was expecting to find (like actual device names)? What did I forget to do?
edit:
Now I have Xorg up, so I'll post the output:
lspci
00:00.0 Class 0600: Device 1002:5957
00:02.0 Class 0604: Device 1002:5978
00:09.0 Class 0604: Device 1002:597e
00:0a.0 Class 0604: Device 1002:597f
00:11.0 Class 0106: Device 1002:4390 (rev 40)
00:12.0 Class 0c03: Device 1002:4397
00:12.2 Class 0c03: Device 1002:4396
00:13.0 Class 0c03: Device 1002:4397
00:13.2 Class 0c03: Device 1002:4396
00:14.0 Class 0c05: Device 1002:4385 (rev 42)
00:14.1 Class 0101: Device 1002:439c (rev 40)
00:14.3 Class 0601: Device 1002:439d (rev 40)
00:14.4 Class 0604: Device 1002:4384 (rev 40)
00:14.5 Class 0c03: Device 1002:4399
00:15.0 Class 0604: Device 1002:43a0
00:16.0 Class 0c03: Device 1002:4397
00:16.2 Class 0c03: Device 1002:4396
00:18.0 Class 0600: Device 1022:1200
00:18.1 Class 0600: Device 1022:1201
00:18.2 Class 0600: Device 1022:1202
00:18.3 Class 0600: Device 1022:1203
00:18.4 Class 0600: Device 1022:1204
01:00.0 Class 0c03: Device 1033:0194 (rev 03)
02:00.0 Class 0200: Device 10ec:8168 (rev 06)
03:00.0 Class 0c00: Device 1106:3403 (rev 01)
04:00.0 Class 0300: Device 10de:0e22 (rev a1)
04:00.1 Class 0403: Device 10de:0beb (rev a1)
05:05.0 Class 0280: Device 1814:0301
05:06.0 Class 0401: Device 1102:0004 (rev 04)
05:06.1 Class 0980: Device 1102:7003 (rev 04)
05:06.2 Class 0c00: Device 1102:4001 (rev 04)
Last edited by Convergence (2012-06-07 02:48:41)

Falconinidy: You're right! That was a bad move. Thanks!

Which megazoom camera gives outstanding results in birds photography?

Which megazoom camera (non dslr) gives outstanding results in birds photography?

sanjurams wrote:
Which megazoom camera (non dslr) gives outstanding results in birds photography?
No non DSLR is good for shooting still images of anything that's in motion.
If you're looking for shots of birds on a feeder, etc. then any of the long range powershots will provide decent files for viewing on a computer or making small prints. The SX50HS lets you capture RAW files which gives you more options for post processing.
http://trulandphoto.zenfolio.com/
http://trulandphoto.blogspot.com/

Custom search using boolean attribute set to True gives no result

I am setting up an auto-query using the custom search portlet. This is to show all items where a boolean custom attribute is checked, ie = True.
In step 3 I have tried to set the operator to Equals to and the default value to True. This gives no results even though several items have this attribute set to True.
The Auto Query check box is checked.

Found that True = 1 in database. When set to this the search works.

Where to find keynote poster templates?...link is broken?

I'm looking for poster templates....the link in the tutorial video doesn't work? Any suggestions? Thanks

See this thread:
https://discussions.apple.com/message/18227365#18227365

Enterprise Manager does not give correct results

I am using version 9.0.2.0.1 core edition(oc4j & web-cache).
My application consists of business components, java beans and jsp. It is running fine.
Oracle enterprise manager is not giving correct results of memory/cpu usage by oc4j_home and bc4j.
Some times it does not gives result, when i refresh it twice or thrice it shows results.
But results are not correct. On each refresh it gives different results.
Then it is very hard to find which resuslt is correct.
waiting for response,
Tahir.

i have been using 9iAS versions 102*, 90200, 90201, and now using 903.
As stated above, some times the results for oc4j_home is displayed.
But the memory/cpu usage for bc4j is never shown.
Also, its radio-button is always disabled. while its status is "running".
On BC4J page, it also shows results of application modules created. But these results are usually wrong.
How bc4j will be enabled, and how its memory results can be get ???
Tahir.

Calling PL/SQL Procedure In Another Schema Gives Unexpected Result

I have a SQL Script that does this:
conn pnr/<password for user pnr>;
set serveroutput on;
exec vms.disable_all_fk_constraints;
SELECT owner, constraint_name, status FROM user_constraints WHERE constraint_type = 'R';
and the disable_all_fk_constraints procedure that is owned by user 'vms' is defined as:
create or replace
procedure disable_all_fk_constraints is
v_sql VARCHAR2(4000);
begin
dbms_output.put_line('Disabling all referential integrity constraints.');
for rec in (SELECT table_name, constraint_name FROM user_constraints WHERE constraint_type='R') loop
dbms_output.put_line('Disabling constraint ' || rec.constraint_name || ' from ' || rec.table_name || '.');
v_sql := 'ALTER TABLE ' || rec.table_name || ' DISABLE CONSTRAINT ' || rec.constraint_name;
execute immediate(v_sql);
end loop;
end;
When I run the SQL script, the call to vms.disable_all_fk_constraints disables the FK constrains in the 'vms' schema, whereas I wanted it to disable the FK constraints in the 'pnr' schema (the invoker of the procedure). I know that I could make this work by copying the disable_all_fk_constraints procedure to the 'pnr' schema and calling it as "+exec disable_all_fk_constraints;+" from within the SQL script but I want to avoid having to duplicate the PL/SQL procedure in each schema that uses it.
What can I do?
Thank you

You have two issues to solve.
First you need to write a packaged procedure that works with INVOKER rights. The default is DEFINER rights.
The difference is excatly what you need. Usually the package has the rights from the schema where it is defined (=Definer rights). In your case schema VMS. Whereas you need the privileges from the user that calls the package (PNR).
=> Check out the documentation for INVOKER rights
The second problem is that the view "user_constraints" will not give the results you expect when called from inside a procedure in another schema. An alternative could be to use the view DBA_CONSTRAINTS with a filter on the owner (where owner = 'PNR'). Not sure if there are other working possibilities. Well you could create a list of constraint names that you want to disable, instead of creating the list dynamically.
And you could have another potential disaster creeping up upon you. If you run this thing, then at this moment you don't have any referential integrity anymore. You can't be sure that you can create the FKs again after this action. This is EXTREMLY DANGEROUS. I would never ever do this in any kind of production or test database. I would be very careful when I do it on a development database.

0I_FYPER - Variable in BEx gives no result

Hello all,
I have a problem in BEx-reporting after a releasechange from BW3.5 to BI7.0 and at the same time SEM-BCS4.0 to SEM-BCS6.0 which belongs to the variable 0I_FYPER. I use this variable in the columns (only) in order to give the user the possibillity to define which periods to show. In the rows I use the rest for defining which numbers to bring up. It worked in BW3.5/SEM-BCS4.0 fine.
I debuged the content of the variable in user-exit ZXRSRU01 (after processing the selection screen) and could find the data I entered but the query gives no result. Any ideas?
Thank you for any feedback,
Chris

Hi Guru,
We have a work around for your issue. Just create a customer Exit variable on the calendar month and use it in the filter.
In the customer Exit variable read the Plant variable and if it is empty populate # as result. Else read the calmonth input variable and populate it as the result.
Use the following snippet to read input ready variables.
DATA: loc_var_range LIKE rrrangeexit.
READ TABLE i_t_var_range WITH KEY vnam = 'VARNAME' INTO loc_var_range.
(loc_var_range-low will have the value of the variable)
Hope this helps.
Regards.
Shafi.

Would like project entry on Recurring JEs and Posting Templates

From our customer:
Version: SAP 2007A PL 49
Description of requirements: (When setting up recurring entries and Posting Templates there is no place to enter the project code. There is a field to enter the distribution code. For some monthly recurring entries such as vehicle insurance, we wish to record a project code on the recurring journal entry which represents the vehicle.
Valid as of: (Not a legal requirement)
Business needs: (We use project codes to record all expenses against a given area. Automated postings such as recurring journal entries that do not post to the project codes jeopardize the accuracy of reports afterwards.)
Examples: (When creating a new Recurring Journal Entry, there should be a field displayed that allows the user to enter a valid Project Code just like there is for Distribution (Cost Centre) Code. Then when the Recurring Journal Entry is added on the proper date it will contain the valid Project Code.)
Current Workaround: (Manually add the project code to the newly created journal entries after the fact. Hard to find entries and high possibility to miss entries or make mistakes.)
Proposed solution: (Please see response under Examples.)
Sally Weinrauch,
Senior Support Analyst
Coastal Range Systems Inc.
Recipients of: SAP's Partner of the Year 2007 & 2005,
North America's Top Ten 2008, 2007 & 2006.
Edited by: CRS Notes on Jul 22, 2009 10:39 PM

Hi
Adding "project" into Recurring posting and Posting templates has been already considered for B1 later version.
Yan

Choose display template based on result type - Content search webpart

Hi
Is it possible to choose display template based on result type in content search webpart same like search results web part? If not available can it be achieved programmatically?
The content search web part is queried against document content type. Based on the document type, the document has to be seen in the hover template.
Please advise.

Hi,
From your description, my understanding is that you want to choose display template based on result type as search result Webpart in Content Search Webpart.
You could customize your display template for Content Search Web Part, please refer to this article:
http://www.benprins.net/2014/05/21/sharepoint-2013-custom-display-template-for-content-by-search-web-part/
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Allocation of multiple expenses in single posting template

Hi
With reference to Message 843069, we would like to suggest improvement to enable multiple allocation of expenses to respective departmental segments using a single Posting Template when each expense is allocated in various proportions of 100% among its Departments.
Example
Allocation of Stationery expense (1000 00) to its Department (1000 01) 1
and (1000 02) 2 at 50% each and allocation of Postage expense (2000 00)
to its Department (2000 01) 1 at 60% and (2000 02) 2 at 40%.
We need these allocations to be saved in a single Posting Template to
create a single Journal Entry at one goal.
Kedalene Chong

If you are using multiple queries then how are you designing the final web template, I meant are you doing data binding for queries with web tempaltes and then insert all the templates in to a main template?
or are you just using multiple table web items and using a single template for all the queries?
If you have Javascript then try using multiple templates for multiple queries and write the javascript for the related template and then put all in a main template.

Gallery Poster template gives fabulous results

Similar Messages

Maybe you are looking for