Gallery - single pic NOT a slideshow ?

Hi all, anyone any idea how to stop a slideshow opening in iWeb when I click on a thumbnail? and instead go to another page with the image on.. just againt a single colour with forward and back arrows?
I just don't like the look of the metal surround etc.. and the new window..
many thanks
Si

I have just checked on my site, and when I click on a picture I just get a larger image and not the slideshow.
I am published on .mac, using the phot page, and I have the slideshow button available. I am not aware that I have done anything special, I just click on it and the larger image appears........
Will

Similar Messages

How do I save a single pic to my gallery from a text message

I am able to save pics from a text message if there are multi pics; However, if there is only a single pic sent to me, I can't figure out how to save it to my gallery. Please help.

Have you tried to long press the photo attachment to get a menu option to save the attachment?

Adjusting/expanding pic size for slideshow so it is not fuzzy looking

Greetings!
You all have been so helpful to me re: slideshows and I-Movie, I-DVD. Thank you.
I have another question, which hopefully one of you can answer. How does one expand the size of a pic for DVD slideshow to allow for clarity? Some of my pics get so fuzzy when placed in a slideshow.
Thanks so much.
PhotogLuvr01

Hi
As I see it - it falls back to two things
• What kind of photo used - total resolution and in what file format
• DVD Standard - as this is only Interlaced SD-Quality (as on old CRT-TVs) - and if feed progressive material or with a high resolution - Downscaling and Interlacing it can reduce quality in a significant way.
So to get maximum quality on the DVD - I create my SlideShows in FinalCut Pro and Export as full Quality Interlaced SD-quality QT.mov (No QT-conversion what so ever)
see my notes on DVD quality.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-HD6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Don't use ”Share/Export to iDVD” = destructive even to movie project
BUT go via Media Browser and as Medium (or ev. Large) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC (29.97fps) - or - PAL to PAL (25fps) when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Pb! pics not showing in n85 gallery but in file ma...

Hi!
As it is writen in title, my pics not showing in n85 gallery but in file manager!
I don't now if it is because I have uptdated till share online 4.
I just have a blank screen with now pics showing. When I click on open, I just have white and grey icons with a boat in it but unable to open one.
That's is really annoying as I bought this mobile phone for the multimedia advantages...
Please need help!
Thanks

its either the presence of Share Online 4.0 or a firmware issue. the same thing happened with N78 until new firmware 20.149 rectified the problem of the thumbnails not displaying/displaying incorrectly. a new firmware should be on the horizon for N85 i'm sure
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!
Message Edited by adrianhughes on 04-Apr-2009 12:47 PM

Flash web gallery - style.xml start with slideshow in play?

When creating a web gallery with Lightroom, using a default flash template, a style.xml sheet is created. Does anyone know the line of code in that style.xml that sets the gallery to load with the slideshow in play mode?
thanks,
Donnie

Please excuse the bump...
Anyone with a LR flash gallery that starts with slideshow in play mode?
Can it even be set to do this?
The only code in the style.xml that looks like it might be realted is line 12 <playOptions playMode="pause"/>, changing that to "play" does nothing.
Thanks,
Donnie

Gallery activities are not tracking in my profile.

I've added new gallery but its not reflected in my profile.I tried to unpublish and publish again.
It din't help.
http://gallery.technet.microsoft.com/PowerShell-System-571521d1
Please help
-Prashanth

I found this post where Ed Price says that it's a separate system and can get congested when transferring data over, I guess that explains the such long delay http://social.technet.microsoft.com/Forums/en-US/77a8f915-689d-4b15-a91d-0f90a332fd4a/my-gallery-contributions-and-downloads-are-not-showing-in-my-technet-profile?forum=Profile
Hopefully yours comes through soon too!
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
www.lynced.com.au | Twitter
@imlynced

I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

My Gallery shows a wallpaper of my pictures when i select "my gallery" I do not want this type of wallpaper or background

My Gallery shows a wallpaper of my pictures when i select "my gallery" I do not want this type of wallpaper or background. Is there a way to show something other than whats in your gallery?

From your homescreen, select settings, wallpaper and select any picture you want from the downloaded wallpapers or a picture from your device.

Is it possible to restore a single deleted note from a time machine backup? If so how?

is it possible to restore a single deleted note from a time machine backup? If so how?

Hi James,
I was able to use VI server to invoke LV 6.1 VI's using LV 7.0 without issue.
After discovering this and mentioning it in a post somewhere, Rolf Kalbermatter indicated that was expected. and I should not be suprised.
So....
Vi Server may help you.
James Mamakos wrote:
Is there a separate place for me to post VIs to be converted? What's a ballpark figure for the maximum file size i could put on to be converted?
Do you know if the LabVIEW developers can/will create a way to overcome this problem rather than having to convert a VI through all the intermediate versions?
To the best of knowledge NO.
For each versino of LV there isw code included that runs behind the scenes when you open a VI from an earleir version which replaces old functions with the new versions. This is called Mutation code. To accomplish its task it has to know everything that changed between version X and Y. Since it is possible to baby step the versions up and the number of user that jump multiple major versions is small, I don't think any effort will go into that work.
THe largest attachment I have managed to upload was 3 or 4 Meg.
Just trying to help,
Ben
Message Edited by Ben on 04-28-2009 08:58 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Change duration of single slide in a slideshow?

Can I increase the duration of a single slide in a slideshow? If so, how?
Thank you

Thank you for your help. I come across the Timeline periodically when I am creating five different slide shows and will keep looking for it. Your feedback gives me a hint.
Happy New Year.
Thank you
ENiggemann

Single Credit Note for multiple Credit memo request

Hi Experts,
I have a scenario where I want to create a single credit note w.r.t multiple credit memo request.
I have tried to change the copy controls for Sales order --- Billing, but still the system is creating individual credit memo for respective cedir requests.

Hello,
Please review the Note 11162.
Regards,
Raghavendra

Converted file is pic not text - how to make text?

Converted file is pic not text - how to make text?

Hi,
I am moving your posting to Adobe ExportPDF forum as you posted this at Acrobat.com forum.
It seems that you did not turn on "OCR" when you convert your PDF file or your PDF file contains too small text/graphics/complex layout.
Please send your file to us if possible using below site so that we can look into the problem:
https://adobeformscentral.com/?f=qJiclooYWGGNFtWfj8g3wg#
Thank you.
Hisami

Can I Pan a single midi note

Is it possible to pan a single midi note in the matrix viewer in Logic? When I edit my midi data in the matrix I sometimes want to pan certain notes left or right but I can't figure out how to do it? This would especially helpful when editing drum loops so I can pan hi hat or certain sounds to certain positions.

to add to another post on this thread. if you are using the exs24 multi-channel insert you can assign different sound as aux channel inputs. this will allow you to pan your cymbals as you wish.
you can also use a multi-channel ultrabeat to do the same. next to the pan button for the instrument in ultrabeat you will see the word main. click on that and then you can assign an output for that specific sample.
from there you can go to an aux channel and assign the input of the aux to the ultrabeat or exs multi-channel output, and put effects, pans, volume and such.
very usefull.

My computer that my iphone 4 is backed up on crashed... I bought a new computer as well as the iphone 5. How can transfer the my data/pics/notes/songs etc to my new phone?

My computer that my iphone 4 is backed up on crashed... I bought a new computer as well as the iphone 5. How can transfer the my data/pics/notes/songs etc to my new phone?

Use the backup you have of the old computer and restore that data to the new computer. Also and backups that you have made of your iTunes library (it has a method to back it up as well) can be copied back over to the new computer. If you attempt to sync the phone to the new computer without the data, it will delete that data from the phone. The iPhone is not designed as a storage/backup device and as such will not sync music from itself to a new computer.
If by chance you had not been backing up the computer and/or iTunes, you can google for some third party software, such as Touchcopy that will do some of what you are asking.

Help! Missing pics, notes, and everything in between after iOS7 upgrade

Last night, I upgraded to iOS7. Before doing so, I connected my iPhone to my PC and backed up the contents (to the PC). Once complete, I moved ahead with the upgrade. Once complete, I think I may have accidentally hit something, causing my phone to be backed up once again, only there was nothing on it after the upgrade to iOS7. Did this overwrite my original backup? Clear out my pics, notes, etc.? Can I retrieve them? Any help is greatly appreciated.
Thank you!

This is my problem I don't have this icon so it is going to be difficult to try the solution ie. general-reset-reset home screen layout

Gallery - single pic NOT a slideshow ?

Similar Messages

Maybe you are looking for