Gallery taking 50% battery after Jelly Bean Upgrade

Has anyone else experienced the Gallery taking up about 50% CPU after the Jelly Bean Upgrade?  Any solutions?
My phone dies in half the amount of time now.

I also noticed significantly increased battery drain after the update. I switched my Network to CDMA/LTE also, but I think the real killer was a couple of other settings that the update (re)enabled that I had turned off; the SmartStay option in the Display settings, and the option in S-Voice settings where it continuously monitors the microphone, waiting for you to say the 'magic wake-up command', that one even says it will drain your battery! With all that stuff on, my battery usage list would show "Screen" as the top item, and that was with the phone sitting untouched in sleep mode for several hours! I also found a couple of the "location update" related settings turned on that I was pretty sure I had disabled. I'm not sure which of those made the most difference (I suspect it was the S-Voice thing), but after putting all that back to way I had it, my battery usage is back to normal.
Many people in the DroidForums discussions are saying they had to do a FDR to fix this, but I suspect all that is really accomplishing is turning off all those battery-eating settings that the update (re)enabled. If anyone is still having issues after switching off the Global radio setting, I'd try the stuff I mentioned first, and if you still see battery drain with your settings back to pre-update values, maybe try the factory data reset.

Similar Messages

  • Problems after Jelly Bean upgrade

    I upgraded to Jelly Bean when it came available and immediately started noticing problems.  The phone became sluggish in general but most notably the keyboard lagged to the point where texting became problematic.  I was unable to use the gallery app - it would open but pictures either wouldn't load or I couldn't scroll through them.  The camera app also wouldn't scroll through my pictures.  The web browser was sluggish even on a strong wi-fi connection.  I did a factory reset twice and lost a ton of information in the process, in hopes the reset would clear things up.  I ended up going to the store and the rep said he would have a new phone overnighted - which by the way, they gave me a used, sorry, a "certified like-new replacement" phone, not a new one.
    Now that I have my replacement I'm reluctant to upgrade this one to Jelly Bean if I'm going to continue having problems.  Are/were these just an isolated problem, perhaps something in the phone itself and not the software, or are these widespread issues that will hopefully be addressed?  I've read on forums all over that people are complaining of battery drain but I didn't have that issue, just the sluggishness and the inability to access my pics.

        Jbthompson, I know it can be upsetting when an update that should improve your phone's functionality causes it to have problems. I haven't seen the issues you experienced on most Galaxy S III's. Like TheGuyUpNorth stated, most issues are resolved with a factory reset. Do you know if any of your applications were automatically re-installed after the reset? Sometimes the cause of slowness can be related to applications that were compatible with the old OS no longer being compatible with the new one, or conflicting with each other. If you reset and then the same applications are re-installed, then the problem may arise again. Have you completed the JB update on your Galaxy S III replacement yet? Even if you defer or reject the software update, it may come again at a later date. You want to make sure you are ready to complete the update because if it alerts you in the middle of the night and you don't respond, it may go thru. If the battery isn't charged fully that could cause a problem with the update completing. Please let us know if you have any problems with the replacement and we'll be happy to help.
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • Xperia T menu icons touch problem after Jelly Bean upgrade

    I have Xperia T upgraded to jelly bean 4.1.2 Build Number 9.1.A.0.489 kernel version 3.4.0-g5b052b2-00759-gd9ee069 - Mon Jan 14 15:29:55 2013
    After tap my menu icons in jelly bean there is no action. ex. Settings, Messages icon tap.
    After switch on developer options -> show layout bounds - it's shown that icons (blue square) are covering the touch area (pink square) and not pushing touch events to action areas, only bouncing but without action. When touching both blue and pink area with finger icons works fine, with touching only blue areas no action. Every other touch are ok.
    Is it common issue ?
    Thanks.

    I think this only happens when you enable that under development options. Have you tried to turn that off and check if this still remains?
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Jelly Bean Upgrade & Battery Life

    Not sure if Battery Life was part of the Jelly Bean upgrade or if I had something running that was killing my battery which has been killed by Jelly Bean, but in the 12 hours I have used this since I upgraded, I have noticed that my battery is still almost fully charged despite the increase in activity as I play around with the new OS.  I normally am limping at 10-15% battery life by this time of day and I still have 60%.  Woot!!! I hope today was not fluke and this continues.
    Anyone else notice the same thing?

        CJ, software updates are supposed to improve functionality of your phone, and I regret to see that you developed a problem with the update. How long has your battery been lasting after the update? How long did it last before? Please try out some of these battery saving tips as well: http://bit.ly/WFT5GG.
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • Google Voice Won't Work With Bluetooth Headset After Jelly Bean

    I am SO frustrated. I had no idea I was installing the Jelly Bean update when I updated the software on my phone. Note to Verizon Communications team: PLEASE do a better job of communicating significant software updates. I would not have installed Jelly Bean. I learned long ago to stick with factory OS on my phones.
    Since the update, I noticed that I could no longer dictate texts and emails. Also, my call recording app no longer worked. I switched to Swype and it would work for a few minutes and then stop.  I could still use my bluetooth headset to make calls and S voice worked (although, like others here, I noticed that it's now worse--it doesn't recognize any contact names I request anymore). After trolling Android forums I found that the problem is with the bluetooth headset. You can still dictate when the phone's bluetooth is on, but when a device is connected, all bets are off.
    I almost did a factory reset, but then I read that a hard reset will not restore ICS, nor did it resolve this bluetooth Google Voice issue for the few people who tried it already. In fact, resetting caused more problems (eg., more battery drain and removal of Adobe Flash, etc.).
    Does anyone know how I can go back to ICS? Bluetooth and Google Voice are the two features I value most in my phones. This is a NIGHTMARE.

    rcschnoor -
    The Bluetooth/Voice Search/Dictation issue is a valid issue for the OP, a valid issue for me and oh yeah, the hundreds of other people affected by the, "Google Voice Search stuck on "Initializing" bug filed here on the Google Android Project page.  Here is yet another reference to the same issue from Android Central.
    The "Google Music freezing after Jelly Bean Update on Galaxy S3" is also a valid and documented bug located here also on the Google Android Project page.
    So I ask, how does sharing with these people that do have these issues, and are affected by them, that you are not experiencing these issues help in any way?  Isn't that the whole purpose of a community forum to help others?

  • Jelly Bean Upgrade Issues

    Hello. After receiving the Jelly Bean upgrade, my Nexus will not longer connect to WiFi. It doesn't matter if I'm at home, work or out for the night. The toggle will go to "on", but will stay gray and then time out. Also, the OS doesn't seem to be as fast. Is anyone having similiar issues? Is there a fix for this?

        ClevBrowns1-
    I'm sorry the wifi is not working properly since the update. I am able to use wifi on my Nexus like always. If you enable safe mode (steps http://bit.ly/OHgHtf) then try to use wifi, is it still an issue? Please keep me posted.
    Thanks
    AdamE_VZW
    Follow us on Twitter @VZWSupport

  • Jelly Bean upgrade failed.

    I got the Jelly Bean upgrade this morning but once I activated the upgrade it failed and gave no reason.  Where do I find the upgrade in order to try it again. Motorola Razr.

        leeder46, let's get a passing grade for the software update. First, I recommend that you delete any unwanted information from your phone to ensure that you have enough memory capacity to accept the software update. For example, uninstall unwanted applications, delete unwanted text message threads, e-mails, and call history. Once you have cleaned your device out, from the home screen, tap Applications > Settings > About phone. You should be provided with the options to update the software. For more assistance and support for your phone, please click, http://bit.ly/y5iuoj
    LasinaH_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • Terrible reception after Jelly Bean update

    The morning after upgrading to Jelly Bean my phone suddenly began having terrible reception issues.  At home I normally get about 2-3 bars but I have never had any issues getting calls out or in or texting... Now I get one bar and absolutely cannot call out or text out AT ALL...  I can receive texts, but I get no calls.  Sometimes it will say that I have no service, even when I have one or two bars...
    Even when I drive closer to town I can't call out until I get 4 or 5 bars...  even then reception is poor and calls are dropped for no reason.  Literally this phone has gone from working beautifully to being absolutely worthless as a phone.  Wireless still works fine at home and I still get 3G/4G service...  It also always says I'm Roaming at home or if I have less than 3 bars...
    I have tried *228 and even reset the phone to factory defaults with a full wipe.  No beuno...  Obviously I've tried numerous reboots as well...
    I'm not sure if the Jelly Bean update is a coincedence, but something is definitely up with my phone...
    Suggestions?

        Javaslinger, I'm sad to see that you've developed signal issues on your phone after the software update. Updates should bring enhancements and fix bugs, not cause issues. It looks like you've done quite a bit of troubleshooting already. If you have a battery saver, please uninstall as these can turn off data to save battery, causing signal issues.
    If still having issues, we'll need to submit more info to our product team.
    1) Provide network type and network strength details observed on phone, Menu>Setting>About Phone> Phone status> network type and network strength parameters.
    2) What type of network service issues are observed on device? Like call drop, browsing failures, SMS etc..
    3) Do you see any flickering in "network type" icon at the time of issue happened.
    4) Is the issue random / always ?
    5) Is the issue limited to a location/region or does he have problem everywhere you visit?
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • Jelly Bean upgrade for AT300 3G model

    Hi. I read an old thread (1 month ago) that JB has not been rolled out to AT300 with 3G due to some modem driver issue. Does anyone know when will this be fixed and when JB update will come for 3G model?.

    Dear mates,
    Stuck with the same issue like the most of you - 3G version AT300-105 with "smashing" 4.0.3 Android on it and with no apparent update in sight.
    I am really disappointed with this as I need this device for work and to make matters worse, some of Android features I need are full of bugs on this version.
    This is a expensive 650 euro tablet from a well-branded manufacturer, not some 80 euro low-end from an unknown manufacturer and I believe the former ones receive better support than we do. For this amount of money I could have purchase just about anything else. too bad I got suckered in for full SD card slot.
    I read most of your posts and I am insulted by the "3G driver issue" which was stated . As a customer I could not care less about this excuse. It is Toshiba's hardware, their engineers chose it, and they should deal with it. Just to remind dear friends in Toshiba that there were three major Android updates since their initial release for this tablet:
    Android 4.1 Jelly Bean (API level 16)
    Android 4.2 Jelly Bean (API level 17)
    Android 4.3 Jelly Bean (API level 18)
    Android 4.4 KitKat (API level 19)
    They had four releases after the initial one to fix the modem issue and I sincerely doubt they even bothered to try.
    If they really cared they could have gone with issuing the newer release without modem drivers with warning for customers and possibility to roll back if wanted, but no, it is easier to use such petty excuse and do nothing. Shameful and disrespectful to buyers. If they don't do anything positive, which I doubt as I have this product for over a year and nothing was done, this will probably be the last thing I ever got from this company.

  • Android 4.1 Jelly Bean - UPGRADE (15$ ?)

    Android 4.1 Jelly Bean is faster than Android  4.0 thanks to something Google calls "Project Butter" which involves a few enhancements like VSync and Triple Buffering.  The Sony Xperia 2011 phones suffer from lagginess after update to Android 4.0 so maybe an update to Android 4.1 can resolve this problem.
    The chances that Jelly Bean will ever get on 2011 Xperia phones are very smal!
    Updating last year phones wiht the latest software is resource demading and this is why i think the solution for this issue is to buy the update
    WOULD YOU PAY SONY 15$ FOR THE Jelly Bean UPDATE FOR YOUR 2011 XPERIA PHONE?
    (maybe buy the update from the Android Market like any other software)

    How wether we will update our 2011 armada of phones with Jelly Bean is for now for the future to tell.
    I'd recommend you to keep posted on the product blog on the link below.
    http://blogs.sonymobile.com/products/
    What do you think about this forum? Let us know by doing this short survey.

  • Why won't my home wifi work after jelly bean update?

    My phone updated to jelly bean on tuesday morning, and i noticed i cannot connect to my home wifi.  It will connect at school or work however.  I have tried turning off and on my phone and my router.  I know its not my connection because my other devices all connect to it.  When i go to the wifi on my phone, it detects my home wifi with a full signal, but when i put the password in to connect, it says the signal is poor and it just repeatedly tries to connect.  Is there any way that i can get my wifi to work again?  If i have to and if there is a way i will uninstall jelly bean if thats the only way to get it to work again.

    Here is my current situation with a brand new Razr HD:
    -Linksys WRT54GL with updated firmware
    -New Razr HD purchased 5 days ago
    -System Version: 9.16.6.X926
    -Android Version 4.1.2
    -Build Number 9.8.1Q-62_VQW_MR-2
    My Mom got the same phone at the same time and has dropped calls, poor wifi signal and range, etc.
    I have fully set up my phone with apps and all settings perfect, cleared the system cache, one factory reset and input all app usernames and passwords again, etc.
    My phone is perfect, except for not connecting to wifi in a room downstairs from the router where all other devices, a Nook, 10-year old DELL laptop, and Droid Incredible get 4 full bars of wifi strength. This Razr does not connect at all and rarely if it does when I leave the door open gets one bar of strength and is useless.
    I love the phone so much I am reluctant to swap it out and lose all my app settings and customization. I read that it isn't mattering if you swap it out, still the same problem. But it's bothering me and I want it right so I went to the Verizon store today to test it and swap it out for a new different one. They don't perform tests and didn't know what I was talking about. Very abrasive staff and manager tried to research the issue for a half an hour, then said they had a call in to Motorola. If I wanted to swap it out I could but that would be my one swap and that's it.
    I have actually spent so much time and effort on this I wanted to get a MAXX HD for my wasted time and frustration. That is simply out of the question. I stood there with my phone connected to the Verizon wifi network in the store with one bar of wifi strength, while the display connected to the same network showed a full network signal all bars.
    They were so abrasive, demanding that it doesn't matter how many wifi bars you get it will still connect to the Internet. I said no that's not true this device will not connect in my bedroom while all other old devices get full wifi strength. They didn't care.
    They were so reluctant in the matter that I decided to walk out and watch for an update to Jelly Bean to solve the issue. People are taking their phones back and it doesn't fix this. It seems to be strictly a Jelly Bean update fix.
    I will watch my phone, only use wifi in large areas that usually work fine, etc. My question is: When will there be a Jelly Bean update pushed out to Razr HD owners on Jelly Bean so they will have comparable wifi and signal strength to every other wifi enabled device that exists?
    Thanks
    PS. I have tried every single router and phone setting mentioned on any forum. Same thing. This requires a 2nd update.

  • Unable to send or recieve video text messages after jelly bean

    I recieved the jelly bean update and I can not send a video message.  When I try it says that it is to large.  This occurs even if its a 2 sec video.  My video is set at the lowest setting also.  When I recieve a video message all I get is the audio.  Please help

        Dear Don2321,
    I am sorry to hear of the difficulites you are experiencing after the software update on your phone. Software updates are meant to provide benefits to your device so I can understand the frustration. Allow us to help get to the bottom of your video messaging concerns.
    On a Motorola Droid Bionic, if you are planning to send a video, you must first change the video recording mode to mms. Trying to send the video in any other video setting, will not allow you to send it and will give you an error message that the file is too large. To change the recording setting mms tap on the Camera icon>switch to video mode>tap menu>tap on the video mode icon next to the microphone>select video message. Once you have changed your setting to video mode, record your video and then send it. If you are still having issues with sending a video via text message in video mode, please reach out to us. We will be more than happy to assist you in further troubleshooting.
    MichelleS_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • Jumping Screen ...Phantom Clicks plague Xperia Z Tablet after Jelly Bean 4.3 update

    I thought Jelly Bean 4.3 would sort the Phantom clicks jumping screen problem but it hasn't....In addition we also have a new problem flickering screen and the adding of full stops from the new Xperia Keyboard...
    Anybody else experiencing this ?

    As long as the screen is clean and you have not downloaded many third party apps, then I would suggest taking the device back to the place of purchase.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Cannot get screen to turn on during call after Jelly Bean

    Got my Jelly Bean update the other day.  Afterward I noticed the issue when trying to check my voicemail.  Called *86, screen went black and I was unable to get it back on using the power button (like I usually do) so I could not enter my voicemail pin.  Verified the phone was still on the call since it would tell me to enter my pin and then finally hang up.  I cannot get the screen to come on via other calls either incoming or outgoing.  This makes the phone virtually useless as a phone since the update.  I have done a full factory reset following the instructions on Verizon's site and prevented the phone from doing a full restore, so it did not pull down all of my apps again in case that was somehow a problem.  Still no joy.  Does anyone know how to fix this?

    Sorry, the email alert got eaten my by spam filter and I just found it.
    I have a screen protector on the phone, but not a case.  I have had my device for about two years now.  There is no damage to the phone at all.  The device was working perfectly fine until the Jelly Bean update.  Ever since then I have had this problem.
    After reading MitchF's response I removed the screen protector that I had on the device and it appears that it may be working at this time.
    What does not make sense to me is that why, as soon as I got the JB update, my screen protector became a problem when it had been working just fine through past updates to 4.0+ for almost two years (minus the last few weeks).

  • Xperia J- Problem in touch after Jelly Bean Update

    Hello Friends,
    I am facing a serious problem in Xperia J after the Jelly Bean Update.
    1) The touch functionality is not working, ie, I am not able to tap the icons to open an app
    2) The back/ home button does not respond to touch
    The next point is very interesting:
    3) The touch automatically happens, ie, when  I just unlock the screen by sliding the unlock button, then automatically the apps get selected, closes by itself, ofens the inner pages which I cant even control.
    Please help by atleast advising me on how to down grade the softwareback  to ICS.
    Thanks in advance,
    ~Viswanath

    It would be worthwhile running a repair:
    To repair the phone software
    1.     Install PC Companion on a Windows PC from Support
    2.     Turn on the phone, and connect it to the PC using a USB cable.
    3.     In PC Companion, under Support Zone and click Start.
    4.     Under Phone Software Update, click Start.
    5.     Click repair phone.
    6.     Follow the on-screen instructions. 
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for

  • Toshiba Lax blinking yellow LED

    After witnessing a short 110V power failure while my 42HL67US T/V was in operation, power was restored and the yellow LED is blinking on a three blink/pause pattern. I have tried the unplug/replug attempt and the reset T/V by pressing and hold the co

  • Moving and configuring

    No clue how to uninstall Adobe Acrobat 9 Pro from my laptop (windows 7) and move it to my PC (windows 8). Also currently reader takes over my screen and I need to work with multiple windows open at the same time.

  • Java - what does it do?

    What is the advantage of using Java, and any advice for the software upgrade? Thanks for any clear information. PT

  • PDF compadibility question

    Hello my name is Daniel Sanders and I am creating a pdf form in Adobe Designer 7.0 that will be e-mailed to other computers in my department. The problem is that I am using Adobe Acrobat 7.0 and many of my customer's computers have Adobe Acrobat 6.0.

  • JSTL Function Causing JDev Designer to Hide Field

    I added a JSTL function to an OutputText field in an ADF Web application. The function itself works at run-time; however, in the JDev Designer, the Designer does not display the field. What I did was this: 1. Added the namespace prefix to the page fr