Gallery: Timing Problem?

When you change the gallery (eg. China to Paris in the
gallery demo) with the slide show playing, just when an effect is
running, the application freezes. You get a lot of
'[reference to undefined property this.options.scaleContent
[Break on this error] if (this.options.scaleContent == true)
SpryEffects.js (line 1055)'
in Firebug.
It seems that this is mainly showing when the cache is empty.
In my own web site
http://www.hannes-renate.de/bali06/index.html
I get these same warnings without any manipulation. There are some
more warnings with respect to Spry, which i can't explain to
myself.
Any hints are wellcome.
Hannes Löhr (aka Hanoman)
PS. I changed gallery.js for the path of pictures and
thumbnails and for preloading the next picture.

Further observation: it freezes not completely, you have to
wait for several minutes until the main image appears. I made this
observation saturday february, 10 at 12.:00 am. The application is
waiting on adobe.com for the thumbs, perhaps to get confirmation
that they didn't expire. Firebug shows the thumb-pics but with the
spinning wheel. Did the adobe site have any performance problems at
that time?
Hannes Löhr

Similar Messages

Can anyone help me with Labview/GPIB timing problems?

I am trying to use a very simple VI (downloaded from the NI site) to control a Newport 1830C optical power meter.
I have been spending most of my time trying to use the VI issue a command to read the current displayed power. When I run the VI normally, I get no response from the meter, and the VI simply terminates without any error message. (The "remote" indicator does light on the meter, though, so it seems to be receieving the command.)
However, when I run the VI in the "highlight exectution" mode, everything seems to work just fine, and I receive a correct reading from the meter! Needles to say, this makes it really hard to debug the problem.
My guess is that I have some kind of timing problem, and t
he "highlight execution" feature fixes it by introducing delays. Is this correct? If so, how can I achieve the same thing by putting in delays by hand?
thanks, Whitney White

Whitney,
I agree that this is very likely to be a timing issue. VIs run much slower in highlight execution mode, therefore your instrument may need more time to prepare the data you have requested. Try wiring a delay inline prior to the GPIB reads and/or writes, or try using Service Requests (SRQs) to give the instrument enough time to generate the data it needs to send back to the computer.
Another possibility is that your instrument may not be IEEE 488 compliant. Some older instruments indicate that they are ready to receive data before they really are. Try changing the GPIB bus timing to the slowest setting (in the GPIB Configuration Utility). This only affects the time that the GPIB controller waits before valid data is on the bus and the DAV line i
s asserted (a step in the GPIB handshaking that occurs each time a byte of information is sent to the device) so this may not be effective.
Lastly, you may wish to try the instrument driver for your instrument. There is a contributed driver at this location: LabVIEW Traditional Instrument Driver: Newport Optical Power Meter 1830C. A 'contributed driver' means that someone outside of National Instruments wrote the driver and then submitted it for posting. This driver also contains a good example of adding a time out.
Regards,
Heather S.
Applications Engineer
National Instruments

Timing problems with AU Ivory Piano + ESB and Logic 7.2

I have problems with Ivory and Logic 7.2:
The Ivory (AU version 1.50) plays well in tempo, but when I want to bounce (export track as audio file) the Ivory plays totally out of tempo.
Even when I touch the record button on audio tracks or when I want to record my mix on 2 audiotracks, the Ivory plays out of tempo.
Even freezing the Ivory track gives the same problem.
Then I need to go back to my last saved version.
The same actions with Emagic, Native Instruments and Spectrasonics AU plugins, and everything works fine.
I throwed away already the Ivory prefs, no positive results.
My Ivory sample files are on a separate 400 GB internal disk, and my Audio I'm recording on a external Glyph disk.
I think I have this problem since I've upgraded from Logic 7.1.1 to 7.2 but I'm not sure. I didn't worked long with Logic 7.1.1.
I don't work in Protools, but I use the DAE and Direct TDM (no Core Audio)
It happens in the most simple application: no DAE or AU plug-ins, only one Ivory AU plug-in.
This is my configuration:
Ivory AU (Audio object-Direct TDM-Instr) output ESB 1-2 -> input ESB1 2 (Audio Object-DAE) -> Output 1-2 of my digidesign interfaces
Ivory becomes totally unusable for me this way. Is someone having the same problems?
Suggestions?
Wim Claes
Setup
Logic 7.2
Protools 7.1cs4
192, 2x96i, 1x 96 interface
G5 dual 2,7 Mac OS X (10.4.3) 4 GB RAM

I tried already a lot of things, but it is very clear:
1. Instantiating Ivory as AU- Ivory plays in tempo
2. Record enable an audio track in the arrange window - Ivory plays out of tempo
This happens with the default song of logic, no other plugins or AU-instruments are instanciated.
I can not find a way to convert my Ivory-midi to audio without the timing problems;
Bouncing, freezing, record to audio, export as audio file: all those things result in timing problems.
I tried this all with emagic plugins (ES2...) and Native Instruments plugins and then I don't have the tempo problem

[Q] Refreshing/Timing problem 21:9-monitor

Hi fellas!
I'm using a Macbook Pro 15" non-retina (Windwith GT-650Mtogether with my AOC q2963pm 21:9 monitor through HDMI. What I have encountered is what I think is a timing-problem. I cannot find the settings which works perfect.
Either, the screen looks a bit grainy at the max resolution of 2560x1080 with the games working (this with Atomatic timing in NVIDIA settings),
or I have a crispy display, but the games ends with a flimmering and black screen after I quit or Alt+Tab out of a fullscreen-game which causes the NVIDIA-driver to stop responding and restarting (using CVT Reduced Blank).
I had to create a custom resolution in order to use the full 2560x1080 resolution instead of just 1920x1080. I tried to manually create something that should meet the requirements, but with no luck. Either, the display goes black, or I get the same problems as listed above.
Here are the specs of the screen:
Resolution: 2560x1080 @ 60Hz
Scanning Frequency: H: 30-99 KHz / V: 50-76 Hz
Pixel Frequency: 185.58 MHz
Does someone know which settings I should use? The only thing I can think of to fix this is buying a Displayport-cable as "no one" ohters is experiencing this issue. Will this easy solution fix it?

Try the Thunderbolt connection.
<http://store.apple.com/us/product/MD861ZM/A/apple-thunderbolt-cable-20-m>

Enhance Timing Problem

Anyone notice that when Enhance Timing is applied to an audio track, that track takes a couple of seconds to start playback? I'm sure it has to do with the time it takes for the real-time processing to kick in, but it's a problem when trying to export the song to disk and that track doesn't start right away...

That didn't seem to work. I locked the bass track, but there's still a pause before that track starts when I play the song from the start.

Photo Gallery Demo Problem

I'm trying to understand the Photo Gallery demo so I can
replicate the function for use on various sites. I've copied the
html, xml, javascript and some of the photo file elements to my
hard drive. I initially modified the file structures to something
more of my liking, but had some problems with the links. I've since
mimicked the structures so I can reduce the initial errors, but I
am stumped at the var dsGallery and var dsPhotos statements that
dynamically link to the China, Paris and Egypt photo databases. In
the original dynamic definition, DreamWeaver only parses the
dsGalleries XML definition, not defining the dsGallery and dsPhoto
nodes. I wasn't too concerned about that given the variable nature,
but nothing except the pull-down menu and controls displayed in the
browser. DreamWeaver shows correct parsing of the dsGalleries XML,
dsGallery and dsPhoto nodes only when I eliminate the dynamic
linking and set it to one of the static links (Egypt). This fails
in the browser to link to the data, giving a display that shows the
correct number of empty thumbnail frames but without the displayed
photos, no Spry effects, and no large photo display. I'm sure I
have multiple reference errors, but I don't see them. Any ideas?
Initial Photo Demo page:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:spry="
http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1" />
<title>Gallery</title>
<link rel="stylesheet" type="text/css"
href="../css/screen.css">
<script type="text/javascript"
src="../SpryAssets/xpath.js"></script>
<script type="text/javascript"
src="../SpryAssets/SpryData.js"></script>
<script type="text/javascript"
src="../SpryAssets/SpryEffects.js"></script>
<script type="text/javascript">
var dsGalleries = new
Spry.Data.XMLDataSet("galleries/galleries.xml",
"galleries/gallery");
var dsGallery = new
Spry.Data.XMLDataSet("galleries/{dsGalleries::@base}{dsGalleries::@file}",
"gallery");
var dsPhotos = new
Spry.Data.XMLDataSet("galleries/{dsGalleries::@base}{dsGalleries::@file}",
"gallery/photos/photo");
</script>
<script src="../SpryAssets/gallery.js"
type="text/javascript"></script>
</head>
<body id="gallery">
<noscript><h1>This page requires JavaScript.
Please enable JavaScript in your browser and reload this
page.</h1></noscript>
<div id="wrap">
<h1 id="albumName"
spry:region="dsGallery">{sitename}</h1>
<div id="previews">
<div id="galleries" spry:region="dsGalleries">
<label for="gallerySelect">View:</label>
<select spry:repeatchildren="dsGalleries"
id="gallerySelect"
onchange="dsGalleries.setCurrentRowNumber(this.selectedIndex);">
<option spry:if="{ds_RowNumber} == {ds_CurrentRowNumber}"
selected="selected">{sitename}</option>
<option spry:if="{ds_RowNumber} !=
{ds_CurrentRowNumber}">{sitename}</option>
</select>
</div>
<div id="controls">
<ul id="transport">
<li><a href="#" onclick="StopSlideShow();
AdvanceToNextImage(true);"
title="Previous">Previous</a></li>
<li class="pausebtn"><a href="#" onclick="if
(gSlideShowOn) StopSlideShow(); else StartSlideShow();"
title="Play/Pause" id="playLabel">Play</a></li>
<li><a href="#" onclick="StopSlideShow();
AdvanceToNextImage();" title="Next">Next</a></li>
</ul>
</div>
<div id="thumbnails" spry:region="dsPhotos dsGalleries
dsGallery">
<div spry:repeat="dsPhotos"
onclick="HandleThumbnailClick('{ds_RowID}');"
onmouseover="GrowThumbnail(this.getElementsByTagName('img')[0],
'{@thumbwidth}', '{@thumbheight}');"
onmouseout="ShrinkThumbnail(this.getElementsByTagName('img')[0]);">
<img id="tn{ds_RowID}" alt="thumbnail for {@thumbpath}"
src="galleries/{dsGalleries::@base}{dsGallery::thumbnail/@base}{@thumbpath}"
width="24" height="24" style="left: 0px; right: 0px;" />
</div>
<p class="ClearAll"></p>
</div>
</div>
<div id="picture">
<div id="mainImageOutline" style="width: 0px; height:
0px;"><img id="mainImage" alt="main image" /></div>
</div>
<p class="clear"></p>
</div>
</body>
</html>
Fixed reference version:
<head>
var dsGalleries = new
Spry.Data.XMLDataSet("Graphics/galleries/galleries.xml",
"galleries/gallery");
var dsGallery = new
Spry.Data.XMLDataSet("Graphics/galleries/egypt/Egyptphotos.xml",
"gallery");
var dsPhotos = new
Spry.Data.XMLDataSet("Graphics/galleries/egypt/Egyptphotos.xml",
"gallery/photos/photo");
</script>
Supporting files galleries.xml and Egyptphotos.xml
<?xml version="1.0" encoding="UTF-8"?>
<galleries>
<gallery base="Graphics/galleries/egypt/"
file="Egyptphotos.xml">
<sitename>Egypt</sitename>
<photographer>Don Booth</photographer>
<contactinfo>
http://www.adobe.com</contactinfo>
<email>[email protected]</email>
<security><![CDATA[]]> </security>
</gallery>
... duplicate China and Paris declarations
</gallery>
</galleries>
<?xml version="1.0" encoding="UTF-8"?>
<gallery
base = ""
background = "#FFFFFF"
banner = "#F0F0F0"
text = "#000000"
link = "#0000FF"
alink = "#FF0000"
vlink = "#800080"
date = "1/10/2006">
<sitename>Egypt Gallery</sitename>
<photographer>Don Booth</photographer>
<contactinfo>
http://www.adobe.com</contactinfo>
<email>[email protected]</email>
<security><![CDATA[]]> </security>
<banner font = "Arial" fontsize = "3" color =
"#F0F0F0"> </banner>
<thumbnail base
="../../gallery/galleries/egypt/thumbnails/" font = "Arial"
fontsize = "4" color = "#F0F0F0" border = "0" rows = "3" col =
"5"> </thumbnail>
<large base ="../../gallery/galleries/egypt/images/" font
= "Arial" fontsize = "3" color = "#F0F0F0" border = "0">
</large>
<photos id = "images">
<photo
path = "egypt_01.jpg"
width = "350"
height = "262"
thumbpath = "egypt_01.jpg"
thumbwidth = "75"
thumbheight = "56">
</photo>
</photos>
</gallery>

Please delete this posting. I've found the full original
information in the v1.6 pre-release information and will compare to
that baseline.

Expose Photo Gallery: Uploading Problems Using Mac

Hello All,
First post, sorry to say it's about a problem I'm having. I have a Joomla based website and I'm using the Expose Flash Gallery as an image gallery solution on my photography site: http://www.wakinglifephoto.com/
The plugin works great on the front end, my problem only occurs when managing albums on the backend, which is also based on Adobe's Flash Player.
Whenever I try to upload a photo on my Mac, the process stalls and never completes. If I'm using a Windows PC, everything uploads fine. I've talked with the people who make this gallery plugin and they say it has to do with a bug that is only found in the Mac version of Flash Player.
Is there any type of solution available for this problem, or do I have to wait and hope that it gets fixed in Flash 10.1?
TIA.

The Fascinate has SD card capability, so I would save all my photos to a micro SD card, and then use a reader to transfer them to your computer.

CS6 Bridge web gallery - HTML Gallery template problem

In CS6 Bridge, a web gallery created with the HTML Gallery template puts the images in a directory with a path of content\bin\images. This prevents the images from being served from IIS - the bin directory is by default a "Hidden segment". There is no need for the directory hierarchy generated to use the name "bin".
I know how to work around the issue, but it would be better if the issue was not present in the first place. I tried to report it as a problem on photoshop.com, but was unable to login.
How do I report this problem to Adobe?

(Me again, my previous Adobe ID broke). We don't have Dreamweaver, and the users who create and upload web galleries would not be able to use such tools (or a text editor which works on several files at the same time). My workaround is to have a directory dedicated to their web galleries using a web.config file of
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
    <system.webServer>
        <security>
            <requestFiltering>
                <hiddenSegments>
                    <remove segment="bin" />
                </hiddenSegments>
            </requestFiltering>
        </security>
    </system.webServer>
</configuration>
So that the HTML web galleries' "bin" sub-directories are accessible.

Possible memory timing problem

Hello, I hope you all can help me. I have been wrestling with this problem for about two weeks and have not been able to fix it.
I recently upgraded my system by adding another gig of memory, setting up a raid array, and adding a X-fi Extreme Music card. Before the upgrade my system ran smoothly for about 10 months. After the upgrade it randomly freezes - the system locks up and won't take any more input from the mouse or keyboard. The only way to recover is to hold the power button down for a few seconds. After that it boots normally and runs perfectly until the next freeze. The freeze can happen at any time, in any application, while the system is idle, or even during bootup. I thought for a long time it was the sound card, but now I suspect my memory timings are off. The problem is, I can't figure out how to adjust them in the BIOS.
My system is this:
CPU: AMD Athalon 64 3500+
Motherboard: K8N Neo2 - Bios 1.B
Memory: 4 sticks of Corair Value Select PC 3200 DDR-400 - 512 meg each
Video: ATI Radon X800 Pro
HD: 2X 74gig Raptors in a raid array (striping)
The only PCI card is the soundcard: Creative X-Fi Extreme Music
Power: Antec Neo Power 480
OS: Windows XP, SP2
I think that's everything, if I am missing something, please let me know. I have run Microsoft's memory test utility overnight, and it has checked out. The memory timing should be 3-3-3-8, but I can't figure out how to set that in the Bios. Also, is there a change I should be making for going from two sticks to four? I don't overclock or anything.
I have been trying to figure this out on my own, but I am coming up short. Any help would be appreciated.
Thanks in advance
Claudius

Hi Claudius. Welcome to the forum. Here are a few tips that will make it easier for you to get help here. Create a sig as described in the forum rules (hint-use profile button in sign-on screen) which will locate all the info about your system in a convenient place at the bottom of each post like I have. It's the same info about your system that you posted in your first post, but having it there in each post makes everyone's life easier. Also indicate whether you have AMD Venice 3500+ (which I think you have).
Timings terminology. It gets confusing because memory specs are listed in different orders when people refer to them, in bios and in post screen. First number should be cas latency (Tcl). Then Ras# to Cas# delay (Trcd). Then Row Precharge Time (Trp). Min Ras# Active time (Tras) is last number although post screen puts it next to last.
Tcl-cas=3
Trcd=3
Trp=3
Tras=8
That's what bios using serial prescence detect (SPD) should pick up under auto for your ram. I doubt bios detected and used Tras 3 like you thought as it would not boot with Tras 3.
Get CPU-Z online for a great tool that gives you a lot of memory info. It shows a lot of info about your chip too. I suspect timings were detected properly or else your machine would not have booted and run.
After you added more identical memory (corsair value select) your machine apparently booted and ran with 2 gigs of ram, at least that is what appears from your post. Microsoft's memory test said things are good. (Don't know what that test is, and if you really want to test it you should use Memtest available online to make a bootable floppy and test memory for about 1 hour.) However, it sounds like your memory is ok and you have some kind of sound card interrupt (IRQ conflict). Did you disable on board sound in bios since you are using a sound card? Try that if you can. If you still get lockups with onboard sound disabled and sound card working, try removing sound card and seeing whether system still locks up.
Good luck.
Edit- In re-reading your post, it may be that system detected Tras 7 instead of Tras 8. You can manually set tras 8 in the bios if you want to, but use CPU-Z first and check CPU-Z memory tab (to see what system is using) and CPU-Z SPD tab (to see what your ram is telling your system to use). I think you will find both are 3,3,3,8. If not, you can always change Tras to 8 in bios and leave everything else on auto. However, you could also change dramm voltage for memory in bios to 2.7 volts without doing anything any harm and this could help memory if you are really having a memory (as opposed to IRQ conflict) problem.

LR4 Flash Web Gallery Color Problems

The color space on the selected images appears to be changing when I use the Lightroom flash gallery in the web module of LR4.1. This stays the same when the gallery is uploaded. In previous version of LR I have seen color changes in the web module but they have been corrected (and correct) when the gallery is uploaded to the 'net.
I have read that this was (previously) a problem with the flash gallery specifically becuase it was not colour magaded, but I understood that this had been corrected for LR4. As far as my use is concerned it's actually more problematic now than it has been previously.
Can anyone offer a solution?
Thanks for any suggestions.
Stephen

I have windows 7 and monitor with a calibrated profile. LR4 flash gallery's displayed are color correct, but the same gallery displayed on a uncalibrated (wide gamut) monitor shows saturated colors. Check your color management in windows 7 if a profile is associated with your monitor. The best color managed web browser for windows is safari for windows next is firefox see also this website http://www.gballard.net/psd/go_live_page_profile/embeddedJPEGprofiles.html

Web Gallery password problems

After recently publishing and setting up a random password for a new iphoto Web gallery, I'm noticing that regardless of the password I assign to this gallery, the viewer ( or myself when testing it) still needed to enter my actual .mac password in order to view the page. Obviously I'd rather not give my personal .mac password out so I'm wondering if I'm missing a step. Can anyone help to correct this problem because I'm finding that the password I assign to it does not seem to work solely on its own.
Thank you.

Welcome to the Apple Discussions. I suggest you first create a new album with the photos in the gallery, delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and, in the iPhoto Web Gallery preference pane, delete the gallery and try again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Image gallery widget problems

First of all, I'm pretty new to coding and using CS4 on my Mac. I'm trying to create a simple lightbox gallery. I'm using the Adobe Widget Browser and downloaded Lightbox Gallery Widget. I had to copy/paste all of the coding because for some reason dragging/dropping didn’t work. All of my thumbnails look good, but when I view in Live mode or in a browser, the large image does not appear. All of my images are in the correct folder and linked, but I'm thinking there's a problem with the 'next', 'prev', etc images. I’m sure it’s something simple I’m missing, but I’m at my wits end. I’ve used the Markup Validation Service and it checks out ok. Here is my site:
http://www.turtlecell.com/index.html
I’d appreciate any assistance! Thank you!
Holly

Having a similar issue - I had taken some iphoto galleries off my mobile me gallery page but they were still linked to pages published in iWeb.
When I realized this I opened iWeb and took the gallery widgets out.
Then went into iPhoto and republished the galleries to mobile me, then back to iWeb and they still showed blank (like the two didn't know about eachother - name of the gallery is still showing in iWeb, but no longer displays photos).
Next try - delete the widget from iWeb page, delete the mobile me published gallery from iPhoto, setup a new (different name and all) published gallery in iPhoto - works, gallery page in mobile me works, back to iWeb and insert widget menu and the old galleries are still listed, no new galleries are showing up in iWeb now - great.
So, trying the tricks of shutting down iPhoto, iWeb, logging out of mobile me account in system preferences as well as via safari on me.com - then log back into every thing and start up iWeb again - still no new iPhoto published mobile me galleries showing in the iWeb insert-widget-mobile me menu.
Any help? Looking for a refresh in iWeb!?

Web Gallery widget problems

I'm having some issues with the mobileme web gallery widgets in iWeb. I first noticed when one of the widgets would not change photos as you roll over it, even though I had multiple photos in the gallery. I unpublished the gallery and re-published using a different name. The next time I started iweb it didn't find any of my mobile me galleries. Almost every other time I get this message when working in iWeb. If it does find my galleries, It doesn't find the new one, but it still lists the old gallery that I have unpublished. I've tried repairing permissions, rebooting. I've seen that a few people had this problem and it went away. Mine hasn't though. Any ideas?

Having a similar issue - I had taken some iphoto galleries off my mobile me gallery page but they were still linked to pages published in iWeb.
When I realized this I opened iWeb and took the gallery widgets out.
Then went into iPhoto and republished the galleries to mobile me, then back to iWeb and they still showed blank (like the two didn't know about eachother - name of the gallery is still showing in iWeb, but no longer displays photos).
Next try - delete the widget from iWeb page, delete the mobile me published gallery from iPhoto, setup a new (different name and all) published gallery in iPhoto - works, gallery page in mobile me works, back to iWeb and insert widget menu and the old galleries are still listed, no new galleries are showing up in iWeb now - great.
So, trying the tricks of shutting down iPhoto, iWeb, logging out of mobile me account in system preferences as well as via safari on me.com - then log back into every thing and start up iWeb again - still no new iPhoto published mobile me galleries showing in the iWeb insert-widget-mobile me menu.
Any help? Looking for a refresh in iWeb!?

IPhoto - MobileMe gallery subscription - problem with password-protected

I am having a peculiar problem with subscribed galleries from MobileMe in iPhoto 08 and iPhoto 09. For galleries that have password-protection enabled, the full URL of the gallery subscription feed is pulled through as the Subscription title instead of the gallery title.
For example "http://gallery.e.com/ACCOUNT-NAME/XXXXXX/?webdav-method-truthget&depth=infinit y&feedfmt=atom....
This doesn't occur for public MobileMe galleries. The title of the gallery comes across and the URL of the subscription is hidden.
Anyone having similar problems? Local Genius Bar couldn't help and assumed it was just a bug, but it doesn't seem to be typical of Apple.
As an aside, it would also be nice to have these feed subscriptions behave similarly to the way RSS subscriptions work in Mail, with the ability to select how often the feed is queried and indicate the number of new items. This would alert users of changes to feeds.
Joe

Upon further research, it appears that this problem occurs when publishing from either iPhoto or Aperture to MobileMe. The problem seems to be when a gallery is published and one chooses not to have the gallery appear on the main gallery page (hidden). It seems to have nothing to do with whether or not one protects the gallery with a password.
So, Apple, if you are listening, can you provide any information on how to have the title of the gallery come through when subscribing using iPhoto while at the same time not listing the gallery on the main MobileMe gallery page? This seems to be a fixable bug.

Gallery zoom problem N8 since PR1.1

I wondered if anyone else has had this....
since 'upgrading' to PR1.1 intermittently, but often the gallery does not zoom correctly.
when i zoom previoulsy it would zoom in the current image in low quality then a couple of seconds later it would paint in the detail....
this painting the detail stage often does not happen and i have to reboot, which often doesn't fix it and i have to reboot again.
sometimes after a reboot, when i open the gallery it will say 'refreshing your media' - anyone else have this - or an idea for a better workaround... how about deleteing all the _PAlbTN directories? where is the gallery database?
There's no dignity in begging for kudos. Do it for the karma.

there could well be a third element to this...
it could be updating to pr1.1 after you have installed bubbles. nokia battery monitor has been giving me hassle too.
but my googling lead me to a bug report on beta labs, it had no other supporters, but uninstalling bubbles removed the problem immediately. not even a reboot required.
bubbles installs all kind of beta versions of all sorts of libraries that are used by all sorts of phone apps. it's a bit cheeky really whilst i understand that a beta is exactly that. this app does appear to have the potential to mess up everything rather than just itself. check this out for a 'known issue' - Installing Bubbles will also install a beta version of Qt 4.7.1 which may cause the Ovi Store client or other Qt-based applications to fail.
There's no dignity in begging for kudos. Do it for the karma.

Gallery: Timing Problem?

Similar Messages

Maybe you are looking for