Game changed to German language after firmware update

I've been playing "Laura Jones and the Gate of Good and Evil" on my 64gb iPod Touch. I just installed the new firmware update, and suddenly that game is all in German. How can I fix this?

Erm, and the rest of the system applications are in English? Also, is there a option in the game to change languages?
If not, try this:
Open Settings, and go General>International>Language, and pick, say, French. Once it's done respringing, launch your game, and when it's done loading, quit it too. Go back to Settings (now Réglages) and go Général>International>Langue and pick English. Now launch your game. It should now be in English.
If not, try reinstalling the game. Warning: This will delete you're current progress. This may be worse than playing in German.
If that doesn't fix it, I'd write the developer, and wait for them to update the app. It may just be that it isn't iOS 4 compatible -- Rayman 2 is like that; one can't get past the second level in iOS 4, but can in iPhone OS 3.1.3.
Hope this helps you!

Similar Messages

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

Updated IOS 6 and iTunes changed to German language...

When I updated to IOS6 it changed the language in iTunes to German.
I purchased and set up in Australia but am currently in Austria. All the settings seem to be the same and say Australia and English and all that.
How do I change iTunes back??

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Change E70 original language with software update

I've bought my E70 by Internet. Its code is 0527538 (APAC). I wish to know if is it possible to change the language to spanish and english, updating the firmware from europe's nokia website. If your answer is affirmative, please send me the instructions in order to do that.

Hi Andrea,
I have changed the original language from 'DE' to 'EN' as u suggested.Thank u.
BUt when i trying to crate the documentation for program it is howing the information message 'Maintain documentation in original language German'.
PLease clarify this problem.
Thanks,

Lock Code request after firmware update on E71

After I updated successful (message was displayed by software updater) my phone, it makes a restart.
And asked for the "Lock Code". I never used the lock code function and I never changed it before.
The default Lock Code "12345" mentioned within the documentation is not working.
Re-installation of the firmware is not working as I am unable to reinstall "PC Suite Support" due to the fact that I am not able to confirm the installation on my phone. I went to the Nokia shop and they told me they have to sent the cell phone in for repair and this can takes up to four weeks. This is totally unacceptable. Until today I was I fan of Nokia phones but this has changed dramatically.

Hi
I also experienced the same problem. Phone was working perfectly prior to Firmware Update.
I had never used or changed the lock code. Initially I thought everything was fine because the
Firmware Update was reported to have been a success.
I then went through the process of selecting language (English) and setting date and time.
However, after doing all this I was then asked for a Lock Code.
I was a little bemused but tried the default '12345'. This did not work.
I tried all the other usual defaults; '0000', '1111', '1234' etc, still no joy.
After a little swearing I decided to ring the Nokia help line. After explaining the problem I was advised to go to my nearest Care Centre. I was also told that if the cause of my problem was as a result of the 'faulty' firmware update then they should do it free of charge.
Off to the Care Centre then (30 mile round trip)!!!! They rigged it up to their 'kit' and confirmed that
the Lock Code had not been changed and was still set to '12345'. They could not access the phone
either. They now have my phone and are going to try and sort it and if they cannot sort it will be
sending off to Nokia. This should then be sorted under warranty (although I would argue the cause
of the problem is a glitch in the Firmware Update and not a fault with the phone).
Let's hope that when I get the phone back it will all be hunky dory!!!
It's also worth noting that even though I could not access the phone directly by using its own keys
I could use all the functions when rigged up to my computer through Nokia PC Suite. I could access
all contacts, messages, calendar etc. I was also able to send and receive SMS. If the phone was
locked then surely I shouldn't have been able to do this????
Hope the above sheds some light on your problem. Just be sure that you are not fobbed off by
either the help line or the 'techies' in the shop. At the end of the day if you have not messed about
with the lock code before the firmware update you should be able to get it sorted free of charge if
the phone is still under warranty. GOOD LUCK!!!!

Airport no longer working after firmware update

Before i get to my question, i think that it is necessary to give a bit of background as to why i have set my network up the way i have.
I recently moved in with my girlfriend and brought my broadband package with me as i would have to pay a fee to cancel my contract within the contract period.
This would be all well and good except that in the new location, the service provider can only supply broadband via an ADSL phone line (provided by a seperate telephone company) furthermore they (Virgin Media - i'm gonna name names) provide a cheap USB only modem - which in turn is only compatible with PPC Macs.
Fine for me, but not so great for my girlfriend who has an Intel Mac Mini and not so great for my new Airport Extreme which of course requires a modem with an ethernet connection.
Bearing in mind that it's just after Christmas and i can't afford to just run out and buy an ethernet modem or change my ISP - i thought that i would try something out.
With the USB modem connected to my old PPC G4 i then connected the ethernet cable (that i had connecting our two Macs allowing them to share the internet connection) - from my G4 to the WAN port on the Airport...
Now i'm a real networking newbie so i was a little suprised when suddenly and effortlessly i had created a wireless network that the Mac Mini and our iPod Touches could see and use. I set up security etc and all was well and good...for two days.
Then Airport received a firmware update and now it doesn't work and resetting the Airport doesn't help.
So now i have to get my hands dirty and like i say, i know jack about networks or the terminology.
With this configuration - and obviously we know that it can work (somehow!)
should i be in bridge mode or sharing a single IP address? and just how am i connecting to the internet. Static IP address/DHCP - PPPoE? I know what these abbreviations stand for but i don't know what they mean.
In the course of 'playing around' with the settings i have seen a message saying that Airport has an invalid I.P. address - why is it invalid and is that only because of something that i have changed or is that the route of the problem?
All the machines can see each other and the only clue i can provide is this log extract.
Jan 19 01:05:31 Severity:5 Initialized (firmware 7.2.1).
Jan 19 01:05:34 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jan 19 01:05:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:34 Severity:5 Rotated TKIP group key.
Jan 19 01:05:42 Severity:5 (WAN) link state is Up.
Jan 19 01:05:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:54 Severity:5 Associated with station 00:1d:4f:e3:87:17
Jan 19 01:05:54 Severity:5 Installed unicast CCMP key for supplicant 00:1d:4f:e3:87:17
Jan 19 01:06:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49186.
Jan 19 01:06:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:08 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49187.
Jan 19 01:07:09 Severity:5 Configuration updated.
Jan 19 01:07:09 Severity:5 unloading current configuration.
Jan 19 01:07:17 Severity:5 Deauthenticating with station
...and so on.
I'm hoping that some networking guru is reading this and can provide me with a few pointers.
Can anyone help? I've been struggling with this for days now.
Thanks in advance.
Steve.

Your setup is convoluted, but it should work. A few comments:
1. The base station should be configured to get an IP address using DHCP, which it will get from your PPC which (with internet connection sharing turned on) is now acting as a DHCP server.
2. The base station should be configured in bridge mode, since your PPC (with intenet connection sharing turned on) is now acting as a router.
3. I suggest you should turn off the network firewall on the PPC as long as your are running this sort of setup. Not ideal, but it will prevent all sorts of connectivity problems between the internet and everything downstream of your PPC's ethernet port.

After Firmware update for my 5th gen ipod computer no loger recognizes ipod

I updated the firmware for my ipod (a pop up informed my after connecting my ipod that a firmware update was available) waited 20-30 minutes my ipod stayed lit with the "do not disconnect screen" After it rebooted itself -accordingly to part of the update's description. THe ipod never showed up on the ipod dock again nor on my computer's desktop. There are no longer any ipod tab is missing in the itunes prefs as well. I went to disk util -NOTHING- My computer no longer recognizes the ipod -not even as a generic drive. Ive tried different usb ports no dice. Tried the reset on my ipod, tried rebooting my computer several times. I am running the latest version of Itunes 7.01. I purchased my ipod and computer around (last April or May). HELP!

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Numerous issues after firmware updates

After installing the latest firmware updates I've noticed several issues develop. Firstly, the keyboard and mighty mouse have become less responsive. Particularly within certain applications, for example in iPhoto there is so much latency with the mouse that it is nearly impossible to scroll across an event icon so that it will display the photos within the event. Or in the few games I play the mouse scrolls with a very jerky motion.
Safari has also not been working well since the update. Certain links (java links maybe) simply no longer work. Or even within this forum, Topics are no longer displayed. I had use Camino to view these forums.
The only reason I suspect that these issues are related to the firmware updates is that all of these issues arose immediately after installing the firm ware updates.
So far I have repaired permissions and used OnyX to run all of the maintenance scripts and empty all of my caches, but no luck.
If anyone can suggest something more to try or provide any insight, that would be great.

Not only these issues, but my iMac has reverted to its original problem of having random freezes. Twice now I have had the screen completely lock while my music/video continued to play in the background, forcing me to force re-start and lose work.
I don't have a clue what Apple thought they were fixing but if anyone knows how to downgrade firmware or if it's even possible please post up!

Recovered from disaster after firmware update 7.4.1

I have spent days trying to get connected to Airport Extreme Base station (two months old) after the last firmware update. I have seen many people with same or similar issues. The usual "doesn't detect wireless device" messages. I finally had some luck running from my clone drive using an older airport utility. At least I could get it to register the base station but only by using an additional ethernet patch cable to my laptop. Then it would allow me to adjust settings. Still things were not right. Connection was not good and I could not use the (802.11n(802.11b/802.11g compatible) settings at all. Sometimes I would get almost there and it would ask for my Network password and then say "connection timed out."
Then I found this post:
http://newtonpoetry.com/2008/08/18/airport-base-station-fix-revert-your-firmware /
Gave it a shot and everything is perfect now.
I reverted to older Airport Utility and older AE Base Station firmware
I downloaded and installed older airport utility 5.3.1, first deleting the old components:
/Applications/Utilities/Airport Utility
/System/Library/CoreServices/AirPort Base Station Agent
/System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist
I had to delete the Agent while booted from another volume since system won't let you delete that. The older Airport utility installer may have replaced the newer one with the old one but I wanted to be sure.
Then I launched the old version of Airport Utility and followed directions, in the above url, to revert to the older firmware 7.3.1. Restarted laptop, opened Airport Utility and voila! Instant recognition. Changed a few settings including the (802.11n(802.11b/802.11g compatible) radio frequency and it all works flawlessly. Range is fantastic again. Very good speed.
I am not suggesting everyone revert to the older (less buggy?) updates but for me there was something very wrong especailly after Firmware 7.4.1. Hope Apple can make these more user friendly soon. I would love to know if anyone, or Apple, can tell me how to fix this issue using the latest updates. I tried every suggestion out there. Hard resets, restarting modem, turning off phones and other "interference", over and over with no luck.
That's my story, so far.
Rob D

Sorry... please disregard my previous question...
I've found out how to downgrade the firmware...
Of course!!! My connection is flying above 6Mbps again Whoa!!! I'm relieved...
For you folks who do want to find out how to downgrade:
1. Reboot the time capsule
2. Connect to it using the airport utility
3. Hold Control/Option key and click File > Check for Updates
4. Select the version you want to downgrade to, click Download
5. When down load completes, click Base Station > Upload Firmware
Select the version that you just downloaded and submit...
Wait about 5 minutes and it will restart... this restart takes little longer than usual... but it will come back.
Good luck all!!!

MiniDP to VGA Adapter - screen flickering, even after Firmware Update

Hello,
concerning the MiniDP to VGA Adapter, I'm experiencing the same issue many other users are complaining about: When hooked up to my 22" external LCD, the screen goes black from time to time. After 1-2 seconds it's back to normal; still enervating though.
Model:
LG L227 WTP-PF (@1680x1050 + max. colors; only available refresh rate: 59,9 Hz)
MiniDP-VGA Adapter Firmware: 1.03 (current)
Mac OSX 10.5.6
MacBook Pro 15" Unibody (Late '08)
Apple Software Update says I'm up-to-date on the software side. I've read that the low refresh rate could be responsible for this. Only problem: I can't change it in System Preferences/Monitor settings. Other options than 59,9Hz are greyed out.
Any solution to this?
Thanks in advance,
Tobi
Message was edited by: GSOY

I've got almost exactly the same set up, only with a Samsung display, and I too have found that the recent adapter firmware update has not done the trick.
However, since you have a PRO, you are (maybe) in luck. The PRO has two graphics options, the 9400M (which is the same as in the MB) and the 9600M GT. You switch between these by selecting "Higher Performance" or "Better Battery Life" in the Energy Saver System Preferences.
I have found that by selecting "Higher Performance" I do not get the screen blanking at all. It is slightly annoying that when taking my Mac on the move, I have to switch back to "Better Battery Life" (and hence log out) if I want to get the most out of my battery, but it is the only way I have found of ensuring a screen-blanking free experience when sat at my desk using the external display.
Hope this helps.
Ade
P.S. I have a LG LCD HD TV too, and don't find I have the problem with either graphics card when using this. I only connect at "something x 768" to the TV, whereas the 22" monitor is "something x 1050", so maybe there is a problem with the 9400M driving higher resolution displays? I presume it can drive Apple's own HD displays ok though....?

Game changed to German language after firmware update

Similar Messages

Maybe you are looking for