Game clock for soccer

Hi all, Can anyone help me with a counting clock for my sons game of soccer. I would like to add a clock to create that real sense of time. One that maybe counts up to 95:00 Minutes. Any help would be great.

Bryan Rawiri wrote:
Have you created a graphic like this below in livetype????
no. no, this is a 5min painting in Pixelmator, 'inpired' by some professional TV-grafics .. steal the design, the layout, the play with color-scheme and transparency (the original is animated...) = looks nice, doesn't it? .. it is a simple 'chart', saved as a png to keep the transparent parts .. really, no big deal: lay the original (a screengrab) onto a layer in the paint app and on additional layers paint over it.. when done, erase original - tadaahhhh .. Daddy is a designer..
I'm still at the very beginning to understand the principles of LT.. esp. animation is the key to 'high production value' - using templates is nice'n fast, but modifying, or even better: creating your own stuff is real fun! unfortunately, I lack the skills to design, but I'm good in re-building .. to some level.. -
< voice of Bob Ross > happy movie making !

Similar Messages

HT4009 Hi I purchased a game app for my daughter (6 years) and noticed 2 charges of £20.98 off this app she doesn't know and I don't know what this is for as it was a free app.

Hi I purchased a game app for my daughter (6 years old ) littlest pet shop and been charged for 2 bills of £20.98 she doesn't know and I don't know how this has happened as it was a free app ?

Hi
Alot of free apps offer in app purchases which has probably happened here, things for extra points scores etc etc are offered for prices which is how the app can afford to be free via the charge in other purchases within the game.
These are the sorts on in app purchases in littlest pet shop may have been one of these?
If you are 100% sure that no purchse was made get in touch with apple they should be able to tell you what was purchased and when then you can take it from there?
Hope this helps

How to use the game centre for apple iPad mini

How to use the game centre for apple iPad mini

Here you go:
Using Game Center on your Mac or iOS device - Apple Support

Can you have two nicknames for game center for two kids linked to one Apple ID?

Can you have two nicknames in game center (for each child) linked to one email/apple ID?

On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
This will have no affect on the ID you share for iTunes content, & you can continue to do so.

My ipod nano was synced by itunes and removed all of my music and game files. I am in the process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

My ipod nano was synced by itunes and removed all of my music and game files, and replaced my music with my kids music that they have put into the current itunes library. My music is nowhere to be found on my computer, so now I am in the long, forever process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

Contact iTunes support and explain your situation to them. They may let you redownload it at no cost.
http://www.apple.com/support/itunes/contact.html
If they don't, I'm afraid you'll have to purchase it again. Sorry.
B-rock

I've a problem which is: Ibelieve there's someone who knows my password in some games like "Happy Day" so, could you please help me by not letting anybody to use this game except for this IMEI 01 336000 521261 1 even if they have the correct password.

I've a problem which is: Ibelieve there's someone who knows my password in some games like "Happy Day" so, could you please help me by not letting anybody to use this game except for this IMEI 01 336000 521261 1 even if they have the correct password. Thanks alot for your help.

Change your password.
These are user forums. We can't do what you ask, in fact no one can.

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
http://www.logitech.com/en-us/support/gamepad-f310?crid=411
I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers.

Using an external reference clock for counter measurements

Hi all,
I have several PXI chassis
configured for testing, each of which uses an NI-DAQ-6221 for
conducting period and frequency measurements among other things.
However each of my setups give me a slightly different reading when conducting identical measurements due to
the tolerance of the DAQ on board reference
clocks.
The chassis' have a 10MHz GPS calibrated reference fed into them via the reference input and this is connected to the backplane. I have tried and failed to try to route and use this as my reference
base for my counter measurements so that each of my cards will give me
the same reading every time. I have tried the routing method using the
DAQ connect terminals vi but could not get this to work. I have looked through the labview examples and cant find anything thta shows me what i need to do to take frequency and period measurments using my external reference as my base clock. There are some examples showing the use of the DAQmx timing vi set to sample clock mode which allows a clock source to be selected. However these examples are only for counting digital events and when i apply the same vi to a frequency or period measurement an error is thrown saying 'invalid timing type for this channel', 'you can select: implicit, on demand'.
I do not
understand the working of the DAQ hardware very well so was hoping
someone could help explain to me how to do this if it is even possible
or give me any guidance as to how else to overcome my problem. Any vis
showing how to use my external 10MHz reference
as the base clock for these kind of measurements would be greatly appreciated.
Regards,
Dan

Hi Dan,
Thanks for the reply. When trying to use the connect terminals i just tried connecting the PXI10 to the onboard clock in the hope that this would configure it to use the PXI10 signal to synchronise the onboard clocks via the PLL. Doing this didn't throw any errors as i recall, it just gave me a reading of infinity as it couldn't measure the signal.
I have actually just managed to successfully do what i wanted thanks to help from Rob at NI tech support UK. There is a DAQmx timing property node which allows you to choose a reference clock source. By using the PXI_Clk10 signal this makes the DAQ synchronise its reference clocks to this signal. I have included an image of the code i used to achieve this to take period measurements.
Here is a very useful link which Rob sent me which may be of help to anyone else with similar problems
http://zone.ni.com/devzone/cda/tut/p/id/3615
Best regards,
Dan.
Attachments:
ExtRef Source Image.jpg ‏105 KB

What is the Safe OC (base clock) for MSI Eplices plus?

Default Base clock for this board is 134. How much can i go still consider as safe OC?

Hi tancheeru, & welcome to the forum. As this is an OC question, the mods will probably move it to the OC & Modders Section of the forum. Please provide a signature with your systems components. It is difficult to make suggestions without it. In most cases I have experienced, base clock at 166 or 167 will most of the time work on default voltage. However, RAM must be adjusted to compensate for it's increase in speed as base clock is increased. This may involve the Mem. Ratio, Uncore Ratio, timings, & DRAM V.

Are there Game Apps for MacBook Pro after installing Maverick

Are there any Game Apps for MacBook Pro after installing Maverick IOS? Any suggestions? Thank you.

The Game Center: http://support.apple.com/kb/HT4314

Game controller for MacBook Pro?

Are ANY game controllers made especially for Mac? I have tried the Logitech wired version and the Logitech Rumblepad 2 wireless version and neither seem to work with my G5. I even added USB Overdrive, which recognizes the Logitech controllers, and have tried to set the prefs in various games, but still cannot get them to work when the games launch. Seems like there ought to be some easy, plug-and-play game controller for Mac. Any advice? I am very computer literate, yet cannot seem to accomplish this very basic task: Hook up a game controller (that SAYS it works on Mac OS X) and get it to work. (I called Logitech tech support and they said the controllers should work on a Mac, but their driver software and their tech support do not support use on a Mac. Huh?)

I like the Logitech Gamepad F310 for games on my Mac. You're right new games are much better with a game controller!

Game controller for intel Mac pro

Any suggestions for a game contoller for an intel Mac pro? I've had no luck with tatieboggle or with the Logitech f710 wireless. Running latest system. Thanks!

For three years I have been trying to get a reliable connection with the F710 for each OSX update. The macgamepads.com and tattiebogle.net solutions do not actually work for extended gaming experiances. In short OSX is lacking REAL controller support. And as long as I have had my Mac Pro it has always been that way.
There is a reason why people don't play games on Mac. I have a SSD drive dedicated entirely to Windows 8 Bootcamp because playing even the most simplistic game on a Mac is a god **** nightmare. You want the F710 to work? Get a PC or run Bootcamp - DON'T PLAY GAMES IN OSX.

Rich: calendar problem when automatically adjust clock for daylight saving

Hello, I'm in trouble when the option to automatically adjust clock for daylight saving time is marked. My locale is pt_BR, and when I try to select the day it simply returns to 17.10.2010 on 16.10.2010 took the test in the following component and realized that the same problem occurs when the Windows clock option is selected .
http://livedemo.exadel.com/richfaces-demo/richfaces/calendar.jsf?tab=usage&cid=15374785
I also noticed that this problem occurs in all components of the JSF schedule, no matter what the distribution
http://www.primefaces.org:8080/prime-showcase/ui/calendarDisplay.jsf
Question is, how to make the jsf solve this problem without having to uncheck the Windows clock?
See below for the following attempts to try to fix the problem:
faces-config.xml file
    <locale-config>
         <default-locale> en </ default-locale>
         <supported-locale> en_US </ supported-locale>
         <supported-locale> of </ supported-locale>
         <supported-locale> fr </ supported-locale>
        <supported-locale> es </ supported-locale>
        <default-time-zone-id> Brazil / East </ default-time-zone-id>
    </locale-config>
{code}
Created file DateTimeZoneConverter
{code:java}
import java.util.SimpleTimeZone;
import javax.faces.convert.DateTimeConverter;
public class extends DateTimeZoneConverter DateTimeConverter {
     public DateTimeZoneConverter () {
        super ();
        SimpleTimeZone stz = new SimpleTimeZone (7200000, "Brazil/East");
        this.setTimeZone (stz);
{code}
In the example above I'm forcing the useDaylight is false.
In component:
{code:java}
<rich:calendar id = "periodoVigencia" enableManualInput = "true" datePattern = "dd / MM / yyyy" inputSize = "10"
           value = "# () contratoMBeanList.criteria.dataInicioVigencia"
           label = "# (msg ['contrato.consultarContrato.field.periodovigencia.label'])">
           <f:convertDateTime pattern="dd/MM/yyyy" type="date" dateStyle="short" timeZone="GMT-3"/>
</rich:calendar>
{code}
and in the web.xml file
{code:java}
<context-param>
     <param-name> timezone </ param-name>
      <param-value> GMT-3 </ param-value>
</context-param>
{code}
But nothing worked. And now what do I do? How to fix this problem, there are some more configuration to be done? Help, please!
P.S.:Apologize for my english, I'm Brazilian.

Like I said, were attempts to resolve the error.
OK, now how to solve this problem? Try the test in your area by selecting the day that DST occurs, you will see what will happen the same problem (to select the day that DST occurs on the screen will return one day less), do the test with the demos that I put in the first post, rich: calendar and prime: calendar.
I do not know if it helps, but I noticed the firebug firefox debugging, it does not matter the way you change the locale or timezone, as the current date from the calendar javascript will always be the standard of the machine running the component.

Recommendations for ipod dock/alarm clock for ipod classic

I want to get a reasonably priced ipod doc/slash alarm clock for my son. He has a 6th generation ipod classic purchased in December of 2009. Any suggestions?

The dock adaptor that came with the iPod is meant to fit Apple's universal dock and not a 3rd party accessory.
The reason you are having issues is because although the dock connectors on iPods are all the same (the pins are in the same place), the connector on the second gen nano is in a slightly different place than on the first. If you look at it from the bottom with the iPod face up, it's slightly more to the left. This, and the fact that it has a metal case with rounded edges, has made the new nano incompatible with almost all these type of accessories.
It's been mentioned here several times, and a few people have been able to get the manufacturer of the dock to supply them with an adaptor.

How can i change fpga clock for whole code

Hi i'm new at labview and using 8.6 demo(real time and fpga modules).
i developed some codes for practise and want to change clock freq to 200MHz from 40M for all codes.
i mean how can i use derived clock for all my vi.
LabVIEW 2009, Windows 7
Solved!
Go to Solution.

PAR done!
ERROR:Xflow - Program par returned error code 31. Aborting flow execution...
when i use 200mhz as fpga clock i'm getting this error after compilation.
is there a way to use fpga other then 40mhz. and i dont want to use timed loops because i am using
loops inside loop.
LabVIEW 2009, Windows 7

Game clock for soccer

Similar Messages

Maybe you are looking for