Game from Nokia software - Certificate not found

Hello, I wonder if anybody could advise me on this. I have purchased a Freecell game from Nokia software online shop (registered to NOkia club before) and received the service message to my Nokia6111. I connected to WAP, but when I tried to download it, there was a message: Certificate not found on SIM card, neither in the phone. I contacted support of that page and they advised to change the settings which I have seen already in these discussions - software download all and online certificate off.However, this should be done in Application manager, but Nokia 6111 doesnt seem to have this in menu. I went through all the possible setting, but did not find anything similar about software download...The lady from customer support seems to be finished with me and I threw away 4 euros. I know it is not that much, but just for the principle...company as Nokia...
If anybody could advise, I would be really thankful.

You should have an option to manually enter the qualifying product's serial number.

Similar Messages

Mac Client Certificate not found

Hey all, i'm trying to install the ConfigMgr client on a mac system. The site is 2012 SP1 RTM however since there is no release yet of the mac client i'm using the mac client install from the SP1 beta install folder (Suggested by Microsoft)
I followed the instructions on how to install clients on mac computer from technet. Everything from the install and the enrollment seems to complete fine no errors. After the enrollment when I open System Preferences > Configuration Manager it says "Certificate
not found" If i check the ccmclient log file on the mac it shows the following errors
Failed to Parse MgmtAuthority ServerList
Failed to get server list
Failed to GetProperty Mode from Configuration Provider : 80070490
Requested certificates not available in store
Certificate not found in store. Bailing out!
Failed to validate certificate
The certificate shows up under system in the keychain, the only strange thing is it shows for name the user who enrolled in the certificate. I figured it should have showed the system name. The root ca is also there. Any help would be appreciated, thanks

Okay so figured this out, and i'll post in case this happens to someone else. The certificate will always show under the keychain with a name of whoever the user was that did the enrollment. So if you used Joe Smith, then the certificate will be called
Joe Smith. In my case the account I used to enroll had a active directory display name of two words such as "Joe Smith" Because of this space in between, configuration manager client kept listing the certificate as "Joe". I was then realized that indeed just
like the error said the certificate could not be found because its looking for Joe and the the certificate says Joe Smith. The fix was instead do the enrollment with a normal account with no spacing in the name. This may be a bug or Microsoft may not recommend
creating AD accounts with display names with spaces.

Mac OSX - Certificate not found

Hi,
Is SCCM 2012 SP1 supports Mac OS 10.9.1 version? If yes, do I need to install any updates?
I have successfully installed and enrolled certificate on Mac OS 10.9.1 verison but when I open Configuration Manager under system preferences, it says ‘Certificate not found’ and
CCMClient log in Mac machine says...
Certificate not found in store. Bailing Out! Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
Failed to GetProperty Mode from Configuration Provider : 80070490 Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
Requested certificates not available in store Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
Certificate not found in store. Bailing Out! Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
Failed to validate certificate Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
OMA : Sending Notification to UI : <CCMClientNotification><Sender>Service</Sender><Name></Name><Id></Id><Type>CCM_OMA</Type><State>Error</State><Data>-2016344009</Data><Description></Description><RebootRequired></RebootRequired><Time></Time></CCMClientNotification> Default 12/26/2013
2:52:42 AM 2954526720 (0xB01A8000)
No Preferences found for Key - 'OMAFailureRetryDelayInSec', Domain - 'com.microsoft.ccmclient'. Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
and to resolve the above issue need a AD account without space in between (thats what I read in blogs). In this case do I need to uninstall client and certificate? if yes could you please let me know how to unregister certificate from Mac OSX machine.
Thank you,
Ramana

Hi,
FWIK, I think the Mac OS 10.9.1 is supported by SCCM 2012 R2, you'd better to upgrade to SCCM R2 to get supported.
Also, take a look in the blog below. There is a way to upgrade the certificate.
http://blogs.technet.com/b/configmgrteam/archive/2013/12/16/mac-os-x-10-9-support-for-sc-2012-config-manager-clients.aspx
Juke Chou
TechNet Community Support

I download two free games from itunes, it is not showing up on my iphone. Help

I downloaded two free games from itunes, it is not showing up on my iphone as an icon. I see it when i have my phone linked to the computer,

I think I may have confused you and I apologize. But you are also confusing me now.
If you were not using restrictions before, then that is why the Allowed Content for Movies in in accessible. You can only access that if you had set a restrictions Passcode. If you do not have restrictions set, then it is a non issue and don't worry about that suggestion.
Were you actively using restrictions on the iPad? If you weren't then you don't have to enable it now. That will not do any good.

Have a new itouch. I'm having trouble downloading iTunes. I keep getting the error message: Apple Application software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTues again. Error 2.

I have a new iTouch. I'm having trouble downloading iTunes. I keep getting the error message: "Apple Application Software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2." I have uninstalled and tried installing again and get the same error message. What do i need to do?
Lg

Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2

HT203164 disc burner or software is not found?

why does my itunes say when i'm trying to burn a cd that disc burner or software is not found? This is making me very mad!
please help? i'm running itunes on a Dell. Thanks

I just updated to Itunes 11.02 and these are my system specs
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
LENOVO 3259AD9
iTunes 11.0.2.26
QuickTime not available
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003CB6C00D76CDB8
Current user is not an administrator.
The current local date and time is 2013-04-01 19:25:09.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics 4000
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Could I safely uninstall and then attempt to reinstall an older version of itunes?
Message was edited by: edalder2000
I found this following message "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"

I have a mac book air, and i bought a LG portable cd drive, which is suppose to burn cds. but they software cd that was included with the lg cd/dvd writer doesnt load. and i want to burn a cd from itunes but it says " burning software is not found"??

so i bought a mac book air, and i had to buy the LG portable cd drive... which is supposed to burn cds? the lg cd/dvd writer came with a cd but it wont load onto my computer when i plug the usb cord in. all i want to do is burn a cd from itunes but it says " burning software not found" but the LG cd drive says it will burn cds?? im confused please help!

You dont need ANY CD/DVD burning software on your Mac
Just plug in your LG DVD/CD player and follow the below instructions
http://support.apple.com/kb/HT1152

Nokia Software Updater not working on Nokia 6120 c...

My phone is the:
Nokia 6120 classic (RM-243) on the 3 network
Software Version 3.70.
I was using the Nokia software updater to update my Nokia 6120c.
It found my phone and a new software version 3.83 was available.
I then proceeded to follow the instructions on screen which led to the latest software download to the PC.
Once the download to the PC was complete another screen showed the download to the phone.
The progress bar was stuck on the same 15 seconds and no progress was made.
Another screen was then displayed showing 'phone recovery', with 4 steps available:
1.remove battery and charger from phone
2.insert the battery and insert the charger
3.click 'retry' to continue
4.press the phone's power button
After following the steps the same software update screen is displayed showing the progress stuck on 15 seconds. Once that fails the same 'phone recover' screen appears.
I closed the updater application and checked the software version using *#0000# and it still shows the same software version 3.70. No software update occured.

leas give me URL to download old Softwere v3.83 for nokia 6120c because i install v6.01 but i dont really like it thak you
hello there,
its is not possible to roll back the firmware. the only way you can update your frimware is to use NSU, for some newer phones FOTA and nokia care points. in very rare instances nokia care points will roll back the firmware but it is at thier discretion and you have to have a really good reason for asking them to do so.
usually alwyas check for the latest nsu, all the drivers and latest version of the pc suite prior to any firmware updates. if your phones are branded to a network, it is up to the network to approve firmware updates prior to release. this might be a reason why some of you are unable to download the latest firmawre for your phones. you can contact your provider and ask them if the latest firmware had been approved by them for release.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Nokia 2690 - Certificate not in Phone or Sim

After software flush from Nokia Care whenever I want to install any software contain certificate it shows " Certificate not in phone of sim ". After visiting Nokia care again they flush it and if it cannot rectify the problem it cannot be rectify. Still now I am unable to install software which contains certificate. It happans with Nokia's software also. Please help.

Hi amiyadalui,
Thank your for your post and as this is your second post may I welcome you to the Nokia Discussion forums.
First may I ask what particular application are you trying to install which is causing this issue? The more information you can provide the better.
Try checking in your Menu > Settings > Security having a look at Authority certificates or User certificates - to view the list of the authority or user certificates downloaded into your phone.
Also trying updating your phone's firmware to the latest version using Nokia Suite. I have attached a link below with a guide on how to update your software.
http://europe.nokia.com/support/product-support/nokia-ovi-suite/howto?ccf_name=nokia-suite-3-2/guide...
If there is no update then please install your current firmware again and hopefully this should reinstall the certificates.
If it still doesn't work you can do a hard reset (factory reset) by Selecting Menu > Settings > Rest. factory sett. (or Reset device or Restore factory sett. or Rest. fact. sett.).
To reset only preference settings, but keep all personal data, such as contacts, messages and media file, select Restore settings only (or Restore sett. only or Settings only).
To reset all preference settings and delete all personal data, select Restore all (or All).
Enter the security code before the restore. If you have never changed your security code, then enter the default code 12345.
Please remember to back up your phone first before doing this.
Give this a go and let me know if any of it helps.
Regards
Raoul_Duke
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

SMS sent from Nokia Suite is not saved

PC Nokia Suite (7.1.18.0) seems to be working fine on both Bluetooth and USB Cable with my Nokia 6300 (FW is V07.21).
EXCEPT, whenever I send SMSs from the Nokia Communications Centre, they are not saved anywhere. I assume that they should save in NCC and immediately be replicated back to my phone, but that is not happening. So I have no record of anything I have sent, unless I key it in onto my phone.
All off the other categories of SMS (Inbox, Outbox, Drafts, Archive) seem to replicate OK between phone and NCC. Why not the Sent messages?
And yes, I am sure that the messages are being sent - that was the first thing I checked
What am I (or the SW) doing wrong?
Thanks

unfortunately I'm also suffering from lack of this feature. however I'm not sure which other mobile phone can do something like requested by author (and me ).
Suppose it has something to do with the way desktop software works with GSM phones, it probably just sends series of AT commands to GSM phone modem, initiating sending of message. Saving of message into "Sent" box may be not implemented into standard AT command set (but here I'm only guessing).
I've happened to work with old Siemens phone and it behaved almost same way, i.e. messages were sent but not saved in "Sent" box. However there was a trick - desktop software had not only "Send" but also "Save" button, and pressing of this button saved messages in "Drafts" box. So if I needed absolutely message to be saved in "Sent" box, I prepared messages and saved them to "Drafts". Later I should take my phone and send messages manually from phone, so at least I saved efforts on typing, but had to work from both PC and phone interfaces to send message.
I'm not sure if any "alternative" software for Nokia phones (like Oxygen Phone Manager) have this capability, but if you look at this screen http://www.oxygensoftware.com/en/products/opm2/images/SMSPictureMessage.gif you shall see there "Save" button which may possibly (?) implement same functionality.
Message Edited by sidream on 05-Apr-2009 05:50 PM

Certificate Not Found error message

I'm trying to decrypt a TLS conversation between my Windows Server 2008 R2 Enterprise SP1 domain controller and another Windows server (I believe it is also at the same OS version). I have the private key for the Domain Controller and I've configured MA
1.2 to load the certificate (.pfx) with the valid password but after I reparse the capture I informational message that the certificate cannot be found.
MessageNumber DiagnosisTypes Timestamp TimeElapsed Source Destination Module Summary
925975 None 2015-03-04T20:59:40.7532822 [domain controller IP address] [Member server IP address] TLS Records: [Handshake: [Server Hello], ChangeCipherSpec, Handshake(Encryted)]
The packet associated with the Ceritificate Not Found message is copied above.
Any thoughts on why I cannot decrypt the conversation?
Thanks,
Michael

Do you see the full TLS session setup?
In the client hello, there is a session_id length field (TLS.records[0].fragment[0].body.session_id.length_in_bytes). It should be zero, if not it's is reusing the ID which means we dont' have all the information in order to decrypt the data.
To fix this the client or server would have to be reset, and the trace needs to collect the original session where the client ID length is zero.
Does the Decryption Tool window provide any more details about that particular session that didn't decrypt?
Any chance you can share the trace with me (you can contact the blog author from http://blogs.technet.com/MessageAnalyzer.
Thanks,
Paul

[SOLVED] Unable to build packages from AUR (build: command not found)

I recently hosed the filesystem on my arch install of ~8 months. I reinstalled arch today and didn't have many problems since I had backups of many important config files. Anyways, I still need to get a few programs installed from AUR, but nothing I get from AUR will build.
I download the tarball, extract into a folder in /home/myuser/builds and then go into that folder and run makepkg -s (as always)
It checks the files and extracts/downloads them. Then I get the following error message:
==> Starting build()...
/usr/bin/makepkg: line 741: build: command not found
==> ERROR: Build Failed.
Aborting...
I've run abs and I checked out the abs wiki page, I've also installed base-devel. I am not sure what else I need to do, the error message is not specific enough.
The packages I have been trying to install are ttf-ms-fonts 2.0-7, keepass 2.14-2, and I also tried ttf-vista-fonts 1-3. I am fairly certain that it is not a problem with the PKGBUILD files.
Any ideas? Thanks!
Last edited by fatjake (2011-03-08 01:02:59)

cyrus wrote:Have you tried Yaourt?
Nope, haven't tried that, I think mainly because I wanted to learn how to use pacman and how to build using ABS. At this point I think I know how to use pacman/abs, as much as this thread might make it appear that I dont
I'll give it a try, as I frequently install software from AUR. In the past I think I let software from the AUR get outdated, Yaourt (clumsy name) sounds like it would help that a bit. Thanks!
Edit: BTW, I really love Arch. I tried it out on a flash drive about 8 months ago (maybe more), and after about 12 hours I was sold and installed it on the drive that Windows XP previously held. Even considering that I had many problems during the initial install, but they were all problems that caused me to learn and were easy to resolve. Seriously, I have lots of Windows tech experience, but only Arch forced me to learn Linux. I had tried Ubuntu previously but it was such a bore, and the problems tended to be hard to find solutions for. I try to convince my other Linux using friends to try arch, but they see it as too hands-on. I don't see it that way, it is very hands off after initial configuration, and the initial config only takes a week or less on the first try and a day and a half (or so) if you re-install. Having backups of your config files is of course a huge deal, and I am glad I had most of those.
Really, I love Arch Linux, it has taught me so much.
Last edited by fatjake (2011-03-08 04:25:15)

Scanjet G4050 Doesn't Scan - Software Component not found error message

Problem:
I have installed and un/installed the software for this Scanjet G4050. It aways completes the installation successful. All seems fine until I push the SCAN Buttion on the scanner. It launchs the software then abruptly displays an Error! window which says "A required software component was not found..." then says to reinstall the software. I unistall the software and reinstall with exact same results at least 4 times. I have downloaded the lastest software from the download HP web page with exact results. The error info listed is 8,[(8,0,0)].
The COPY button and software works. I can scan preview the same photo in the copy mode, crop it, etc. and print it, but the SCAN button always fails with the Error! message. I think I can throw this HP Scanjet G4050 scanner a good 25 feet. But before it gets launched.... hmmm... maybe Yardapult?
This is a Windows XP (SP3), Dell Precision 360 system.
9/16/14 After following the Waterboy71's suggestion to post this on the Commercial Forums with zero resulsts, I finally threw in the towel. (I need this scanner for work) Returned the Scanjet G4050. Bought and Epson V550. Scanned the very 1st time. Now I can get back to work. I should have pulled the plug sooner. There's just seems to be too many problems with the G4050. What has happened to HP?

Hello Edmo13,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How to fix Safari 5.1 Preferences and Extensions from displaying "localized string not found"

I'm on a MacPro Dual Core, just recently upgraded to Lion but Since then Safari has been misbehaving.
First of all when I go into Safari Preferences in the Privacy section all that it shows is "Localized string not found" this shows up in all the button options of that section.
I also noticed the same problem, this time on the Preferences/Extensions secion when I installed the 1Password extension from Agile, which it's not working properly either, it actually displays the same "Localized string not found" copy in all of the items.
I'm following up on this issue with Agile but what makes me think that it's a Safari problem is the fact that this is also happening on the Privacy area of the Preferences even though I unistalled the 1Password extension.
Has anyone had similar issues, both with Lion's Safari 5.1 Preferences/Privacy or Extensions displaying "Localized string not found" or with 1Password not working properly?
Thanks in advance.

Try troubleshooting the Safari .plist file.
Go to ~/Library/Preferences. Move the com.apple.Safari.plist file to the Desktop.
Quit then relaunch Safari to test. If that helped, move the .plist file to the Trash.
~ (Tilde) character represents your Home folder.
For Lion: To see your Home library, hold down the Option key while selecting Go in the menu bar.
If deleting the .plist file didn't help, go to ~/Library/Safari/Extensions.
Move the Extensions.plist file to the Trash.
Restart your Mac. Try Safari.
Also, you may need to check the 1Password site for updates for Lion / Safari 5.1 compatbility. Apple is not responsible for updating third party software.

How can I stop Firefox from opening (to "File Not Found") when opening my Opera browser?

Ever since I installed Opera 10.61 on my new computer (Windows 7 Ultimate operating system), whenever I open Opera, Firefox opens one second later with the following error message:
'''File not found '''
Firefox can't find the file at /C:/Users/Nasheed/AppData/Local/Opera/Opera/temporary_downloads/client-en.xml.
* Check the file name for capitalization or other typing errors.
* Check to see if the file was moved, renamed or deleted.
TRY AGAIN.
<nowiki>****************************************************</nowiki><br />
This happens EVERY TIME I OPEN THE OPERA BROWSER. How can I stop this from happening? I'm stumped.
[EXTRA INFO - I was unable to enable Firefox to access my previous profile on the new computer (despite putting the old profile in the appropriate Mozilla Firefox folder. So, there are now two profiles in that location.
After reading the answer to another forum member's question, I attempted to resolve the problem using Profile Manager, but I was unable to locate the Profile Manager. The Windows "Search" feature is not enabled on my new computer (nor can it be enabled from the Customize Start Menu options).]

Thank you for your response, Cor-el.
I had Opera set as my default browser since this began happening. I changed my default browser back to Firefox mainly because having Firefox open one or two seconds every time I open Opera was/is such a nuisance.
I believe this problem began because I attempted to manually transfer the files from my old computer to the new one (via the backed up files in my external drive). I was unfamiliar with Windows 7 when I did this. Microsoft changed the file set up from what I had been used to in Windows XP. I used XP for six years before being exposed to Windows 7 (I never had Vista).
I'm almost sure this problem has something to do with where I placed the application data when I was trying to reestablish the program set up on the new computer.

Game from Nokia software - Certificate not found

Similar Messages

Maybe you are looking for