Game performance becomes slow when unplugged

i have an hp dv5 1006 ax
with ati  mobility radeon hd 3400
my games run smooth when plugged in but once unplugged it becomes slow and jerky
i tried setting the power options . it didnt help
any alternatives.. pls help

this is caused from your power settings utilizing your switchable graphics. go in your power settings and you can set it to not do that but then your battery will die faster.

Similar Messages

  • My Macbook Pro runs VERY slow when unplugged. The battery charges and runs ok. Ran an SMC reset (no success), Safe mode (did not work), and hardware check (came back ok). What can I try next to fix this?

    Hello all,
    I am new to posting on this forum but I really hope that someone out there can help me out. I have a 13" MacBook Pro, 2.53 GHz Core 2 Duo, 4GB 1067 MHz DDR3, running OSX 10.6.8. My problem is that when I unplug the laptop form the charger and run it on the battery, the computer becomes unresponsive to any commands at all. It basically really slows down to a crawl. Even when rebooting it will take 5-10 minutes or more to do so. The odd thing is, when it gets plugged back in while any of this is going on, within a minute or two it works perfectly. It has been in a mac authorized repair shop for 7 weeks and has had a new logic board and a new hard drive replaced. The battery was tested and charges fine, holds a charge when unplugged, and the system profile shows the battery at Normal. Recently, many knowledgeable mac enthusiasts gave me tip that might help. Here is what I did: Ran an SMC reboot (no success), rebooted the computer under safe mode then unplugged it to test (no success), and ran a hardware test on the install disk (showed hardware ok)
    I am at a loss as to what to do next. It has become impossible to use this laptop for my classes when it is unplugged. I am about ready to just go buy a new one, and call this one a goner.
    I am hoping someone reading this can help with any other ideas on its problem. Help? Anyone?
    Steve

    LPBassman,
    since the tech in your IT department was able to copy your daughter’s data from her MacBook Pro’s internal disk, I’d suggest completely erasing the internal disk (using Disk Utility in Recovery mode, reformatting it with a “Mac OS Extended (Journaled)” filesystem), reïnstalling its original version of Mac OS X (either Snow Leopard from the grey Mac OS X Install DVD if it originally came with two grey DVDs, or Lion via OS X Internet Recovery if no grey DVDs originally came with it), running Software Update to get it to 10.6.8 or 10.7.5 respectively, reïnstalling Mavericks, running Software Update again to get it up to date, and finally restoring your daughter’s data.

  • HT1338 network become slow when using bluetooth.

    I am using macbook pro retina display, my issue is, every time I turn my bluetooth on, the network become slow. anyone facing a same problem?

    A lot of people were experiencing the same thing and reported it on the MacBook Pro forum. But that was when the rMBP first came out and I thought that the issue had been resolved with software/firmware(?) updates.
    Are you running the very latest build of 10.8.2? With the supplemental updates as well?
    Clinton

  • My HP dv6 1030us laptop becomes slow when removed from AC power

    Hi,
    My HP DV6 laptop has windows 7 operating system and it behaves pretty weirdly .
    It becomes really slow when removed from AC Power and have to restart my system to bring it to normal speed don't know why its behaving like that and help to resolve the problem would be greatly appreciated and also my system gets overheated a lot and I have to use a cooling pad always to keep it cool and running properly along with AC power
    I would greatly appreciate any advice in resolving these issues.
    Thanks in advance.

    for how long have you had this laptop... If you had it for longer than a year you may be dealing with a dust bunny (acumulation of dust in the vent that's right beside the fan). Normally when that vent is clogged you get the type of overhetaing you may be experiencing, so i recomend you to open it up and give it a nice clean as soon as you can. As for your computer slowing down without the ac adapter.
    Do you know under what power option are you running ur computer?

  • Why number becomes slow when after formatting function is used?

    When changing something at Numbers (table, font, colors, etc), it becomes slower. I don't understant why, as the PC is brand new...

    Hi Nano,
    How large is the table that you are formatting? Is there a way to separate your results (with formatting) in a small table *away* from your main data table?
    Regards,
    Ian.

  • Why has my Ipad become slow when loading Keynote presentations?

    I use Keynote on Ipad as a presentation tool.  Recently, the Ipad has been slow to load a presentation (up to 3 seconds after selecting a particular presentation).  It also randomly updates presentations that haven't been used recently.  Any thoughts?

    Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
    Settings>General>Reset>Erase all content and settings

  • My ipod has stopped working since the laptop turned off during synching.it shows no music and wont play games also is slower,constantly resets and freezes itunes when connected to computer.if i switch it off a spinning wheel appears till batt dies.help?

    My Ipod has stopped working properly since the laptop shut down during synching.
    My ipod is being slower and wont show any music. when I go into general settings it says the music and videos are loading..
    It wont let me into settings all of the time either.
    My applications and games have become slow or unresponsive.
    The ipod keeps resetting itself, I have tried resetting it to no avail.
    I tried plugging it into itunes but it freezes itunes and wont show up on my computer.
    When I switch off the ipod it shows a spinning wheel until the battery dies, which could be nearly 2 hours!!
    does anyone have any advice as to what to do?
    currently ive reset it - nothing has happened
    ive let the battery drain itself then recharged it to see if that would make a difference - no difference
    Help ASAP needed

    Try restoring the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod.
    If still problem make an appointment at the Genius Bar of an Apple store. If your iPod is with in the one-year warrranty, not abused and defective Apple will replace it.

  • I have an iPod touch 4 an it gets overheated while charging an becomes slow

    I have an iPod touch 4 an it gets overheated while charging an becomes slow when I touch the screen. Can someone tell me why an what I should do?

    Apple will only give you a 10% recycling discount if you turn in an old iPod when you purchase a new one. Better off selling it yourself.
    Apple - Recycling Program for iPod and Mobile Phones         

  • Laptop's become slow as soon as i've connected my portable

    ok, this is something new i've been facing since yesterday, i noticed that my laptop lenovo G460 has become slow  when i connect my 320 gig portable HDD, its a seagate freeagent go... when i connect it and open the portable drive on my computer it shows that its loading data...  the green progress bar you get when its reading or loading data from a disk or drive... the progress is extremely slow.... didnt face any such issue when i connected this portable to my desktop which is much lower on specs.
    my laptop specs
    Intel core i3 2.13ghz
    4 gigs ram
    320 gigs internal HDD
    GERFORCE 310M 512 mb graphic card
    windows 7 home premium 64-bit
     need help resolving this issue asap
    Solved!
    Go to Solution.

    have you plugged the both usbs?

  • Site Performing Very Slow on Azure

    Hi Guys
    I have a site which is performing very slow when deployed on Azure. However, the same site's performance is very good when deployed on our own server. Can you please advise/guide on the possible reasons for this and the way to debug/fix the same.
    Let me know if any more details are required from my end.
    Thanks
    Developer Trinsights

    Hi,
     Thanks for Posting.
      Have you deployed a website or Cloud Service ?
      You might find the Below threads and links useful to diagnose the performance issues.
    https://social.msdn.microsoft.com/Forums/en-US/4bae13b8-b074-46a7-8722-319082ade070/very-slow-azuresite-performance?forum=windowsazurewebsitespreview
    http://stackoverflow.com/questions/18071780/services-extremely-slow-when-deployed-on-azure
      http://msdn.microsoft.com/en-us/library/dn481103.aspx
    Best Practices for Performance in Azure Applications
    Regards,
    Nithin.Rathnakar

  • Videos slow when fullscreening?

    I have an ATI Radeon Mobility HD 4500 on my laptop which should be more then enough to play flash videos and normal videos at fullscreen,
    I also have the catalyst driver installed.. I have also had previous distros on it (fedora and ubuntu) where the flash player worked fine so not sure whats wrong here..
    However whenever I fullscreen flash player plugin in firefox (same thing on chrome) it becomes slower and also begins to hang in and out..
    This also happens when using vlc, the wierd thing is lets say that vlc is maximised but not fullscreened, if I then fullscreen it it will play fine with no slowness whatsoever. However if vlc is not fullscrened with a small window (i.e. not maximised) and I fullscreen it, it begins to lag and become slow when it is fullscreened..
    Flash player is slow all the time when fullscreened however the windows have always started off quite small so this may be the issue.. (runs fine when not at full screen)
    Can someone please help me solve this problem?
    Thanks in advance!
    DoctorZeus
    P.S
    Forgot to say I'm using Xfce, compiz is installed but not being used yet..
    Last edited by doctorzeus (2012-01-21 22:32:51)

    Scratch the thing about VLC, just tried watching an episode of Dexter, no dice it began getting slow about 10-20 seconds in when fullscrened and then micraculy spead up when i when I quit fullscreen..
    So basically all videos are slow in fullscreen, any suggestions?
    Last edited by doctorzeus (2012-01-22 13:02:12)

  • My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

    I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

    On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
    >My performance is very slow when I run graphs. How do I increase the
    >speed at which I can do other things while the data is being updated
    >and displayed on the graphs?
    >
    >I am doing an an aquisition and displaying the data on graphs. When I
    >run the program it is slow. I think because I have the number of
    >scans to read associated with my scan rate. It takes the number of
    >seconds I want to display on the chart times the scan rate and feeds
    >that into the number of samples to read at a time from the AI read.
    >The problem is that it stalls until the data points are aquired and
    >displayed so I cannot click or change values on the front panel until
    >the updates occur on the graph. What can I do to be a
    ble to help
    >this?
    It may also be your graphics card. LabVIEW can max the CPU and you
    screen may not be refreshing very fast.
    --Ray
    "There are very few problems that cannot be solved by
    orders ending with 'or die.' " -Alistair J.R Young

  • WHen I first installed iOS 6 the App Store crashes...and now having iOS 6 for 2 weeks now, all my apps are buggy and now are crashing! Safari and built in apps are becoming slow and crash. I hate how apple leaves iPod touch 4g and iPhone 4 in the dark.

    WHen I first installed iOS 6 the App Store crashes...and now having iOS 6 for 2 weeks now, all my apps are buggy and now are crashing! Safari and built in apps are becoming slow and crash. I hate how apple leaves iPod touch 4g and iPhone 4 in the dark and basically force us to upgrade to newer devices. Apple could of done better with the update and needs to resolve these issues.

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    The App store crashing is a known problem.
    IOS 6 App store crash: Apple Support Communities

  • Only when I'm in mozilla, the enter key becomes slow, very slow to change paragraph

    Only when I'm in mozilla firefox, the "enter" key becomes slow, very slow, to change paragraph. I do not this happens in "Word" and I do not this happens in other browsers. A
    nyone know what happens? (I have a good updated antivirus, there is not the problem). W
    hile waiting for an answer, thanks. M
    aurosti

    You could adjust the mailnews.tcptimeout preference, as explained in the 2nd point in [http://kb.mozillazine.org/Can_not_send_large_attachments this article]. Also, make sure there's no security program scanning outgoing mail attachments.

  • IPad 2  has become very slow when charging

    Since I upgraded to ios 7, my iPad 2  has become very slow when charging. And the battery drained very fast. I cannot put it on standby but need to power off completely when I am not using it. This is very troublesome.

    Tap Settings > General > Reset > Reset All Settings
    Then restart the iPad.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
    Then press and hold the Sleep/Wake button until the Apple logo appears.
    Then try charging the battery.
    How to Improve Battery Life in iOS 7

Maybe you are looking for

  • Avi file type support - video component codec

    I was trying to make a movie out of the clips from my flip mino video camera. I have a flip mino video camera. The file format that it generates is .avi. I uploaded the .avi clips in Premiere Elements 7.  The audio part is OK but for the viedo part,

  • Problems populating a PDF file

    Good afternoon everyone, In the latest Firefox update (July 21st) it seems that we have received many complaints about not being able to scan into our browser based system. We use the dynamic web twain as a plugin to allow this. We were previously ab

  • Currency Exchange Rate Maintainance in BCS

    Dear Experts, I need a clarification, WHile maintaining Exchange Rate in BCS, 1) how the Exchnage Rate values reflects in R3 2) Vise versa While maintaining Exchange Rate in R3 how it reflects in BCS. a) Is there any BCS or any machanism needs to be

  • Suddenly Bridge says it's been Discontinued

    All the sudden my Bridge Home won't open. It says: "The Adobe Bridge Home service has been discontinued in order to focus resources on other efforts." Any help would be greatly appreciated. Thanks!

  • Read & Applied Other Threads Win Still Fatally Crashes When Running iTunes

    I updated all the drivers on the system to the latest from the manufacturer websites yesterday. I then installed and ran WinDbg it is telling me RtkHDAud.sys (R+k HDAud+179e98) is the culprit causing a double fault. When I disable Realtek High Defini