Games color looks distorted after update

Hi just to find out what can I do to fix the problem with color distortion after win 8 update?

Update graphic card driver.
Visit the website of the graphic card manufacturer to download and install the latest driver.
S.Sengupta, Windows Entertainment and Connected Home MVP

Similar Messages

After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

This seems to be most common with lower resolution pictures. You can go into settings > general > accessibility and turn reduce motion motion off and then try to rescale. Or user a higher resolution picture, which works better with the new OS.

I can no longer load certain games on face book after updating to 4.0.1

after updating to 4.0.1 I can no longer load the game farmville or frontierville on facebook. i first tried to send a feed back and it indicated that I had the wrong version. I went through reseting the useragent as per your instructions but not all of your useragents you indicated were listed. I then tried again to send a feedback this time it went through but after entering my comments it would not send them. So do I uninstall firefox and start over? If I do what happens to my bookmarks?

It went a little farther this time after disabling AVG. The problem still exists it will not continue loading the app. It just goes dead there is no traffic on the sat modem, also it does not show any friends when I try to send gifts. All of this worked with the previous version of FireFox. I tried it with Google Chrome and everything worked just fine.
Thanks for the input - any other ideas?

Bad looking font after update to 17

I had ClearType off in windows while using FF 16.0.2. It looked great. After update it looks ugly! I prefer not turning clear type on, because without it, font is for me better. I also have changed font of basic elements to tahoma and now win7 looks great for me.
I read article, that it looks like this because ClearType is not turned on. I have turned it on and it is still a litle bit different. Not looking good.
Do you have any solutions to this problem?

You can check the solution in [https://support.mozilla.org/en-US/questions/942265 this question].

Invalid Color Space error after update Reader to 9.3.3

After updating Adobe Reader to 9.3.3 I run into the Invalid Color Space error when trying to open a PDF file created with CorelDraw 12 in the format PDF/X-1A. This format needed by a printing office to print the file. The strange thing is that Reader opens older PDF files exported from CorelDraw in thsi format normally without the error message.
It happens only with PDF exports made after the Reader update. CorelDraw settings are as previously used.
Exports in other formats, other than PDF/x-1, X-1A and X-3 open normally. How to solve this??

any suggestions?

Pages documents look blurry after updating to iOS 8.3

I use the iWorks apps a lot, after updating tonight to iOS 8.3 I discovered that the display of all the documents from Pages looks blurry, and when I open a document it looks still blurry, is there a way to fix it?, Am I the only one having this trouble?

Just got off the phone with Apple Tech Support, including a Pages specialist. No solutions so far but there have been other complaints. The initial technician had to look up under iWorks rather than Pages. The Pages specialist is filing a report but suggested it would speed things along to go to apple.com/feedback, scroll down to iOS Apps, select Pages, and file a bug report online, which I just did. The more of us willing to file an online bug report the faster the fix. Be sure to include the version number of Pages (Settings/Pages). I checked other native iOS apps (Safari, Mail, Notes, Calender, Contacts) and they are all fine. I updated my iPhone 6 and iPad Air 2 to iOS 8.3 and Pages text is blurry. I did not update my iPhone 5c. It is still running iOS 8.2 and Pages text is perfect. All are running the latest version of Pages (2.5.2). So the problem is definitely with the 8.3 update.

All games do not start after update to 10.10

Hello,
I updated yesterday to Yosemite and since then all games, that I bought in AppStore (XCOM, Tropico) do not launch. I bought and installed XCOM Bureau after updating to Yosemite - but it doesn't start either. In requirements stays "OSX 10.9 or higher" - so, it should work, but...
Any ideas?
Thanks!

If the version is correct under "About this Mac" it's uneccessary to apply the combo update again. In most cases it doesn't help solving issues like that. I chat several hours with the Apple support and find the problem after digging deep into the KB.
The problem in my case was a corrupt IMAP account. I disable my mail accounts one by one by unchecking "Mail" in the System Preferences settings and try to start Mail. Don't forget to enable the account again before disabling the next one. That point us to the corrupt mail account. What I do next is to delete the corrupt account and create a new one. In my case without data loss because of IMAP.
What I do before (without solving my issue):
Reboot in safe mode and starting Mail
Clear NVRAM
Remove all Mail plugins by deleting the content of ~/Library/Mail/Bundles and /Library/Mail/Bundles
Hope that helps.
Thomas
P.S. Thanks to the guys from Apple support who gives me first class guidance to solve this problem.

Fonts look distorted after publishing site

Can someone tell me if this is bug on EDGE ANIMATE?
The following link have an edge animation using fonts Poiret-one, sans-serif for some reason on google chrome they look distorted
the ones on the bottom are from adobe muse they look better but still not like they show on screen.
I have tried several different fonts and same issue, thanks
http://edgepoolsfonts.businesscatalyst.com/index.html

Looks all good here on a Mac using Chrome

Color Printing Problems after update dec28/07

Last night I installed the latest updates for PS CS3 on 2 machines and both machines have the exact same color issues while printing with two different Canon printers.
The Problem:
Since this last update all images I try in print from 16bit ProPhoto or AdobeRGB 16bit, converted from Canon RAW through ACR look sepia tone, there is virtually no color (images still look as they did before on my monitor). In order to get the color to print I must convert image profiles to 8 or 16 Bit sRGB. I have not changed any settings after the update and confirmed that the update made no changes to the printers set up. sRGB 8bit jpeg images print color as seen on the monitor.
BOTTOM LINE: I can no longer print ProPhoto or AdobeRGB color space on my 8 color Canon Printer

Thanks Jeff
Both computers are PCs, one on XP, one on Vista, and printers are Canon i9900 and Canon ip4000 both are printing exactly the same way. Swoped printers between PCs with same outcome. Only changes made to both PCs was the CS3 update.
Jeff, I thought the problem may stem from the ACR RAW conversion as regular sRGB jpegs print the color as seen on my monitor. I have also submitted this question to the general PS forum...
Thanks again for taking the time to reply..

Aduio distortion after update?

After i did the update something wrong is happening with the audio
it distorts whate ever i listen (you tube, i tunes, editing) everything else.
Strange distortion on audio
Macbook Pro 17''
Processor 2.2 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Mac OS X Lion 10.7.5

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook 2> /dev/null; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Itouch games won't play after update

Ok, so I downloaded the new 3.0 and the the update 3.1.I had games on my Itouch before the updates and they worked just fine.Now they are dead.I was hoping the 3.1 would fix this problem, but it didn't.Anyone else having this problem or can tell me what to do to fix it.I am thinking an open window would work. :o)
Thanks!

Not sure if this was the fix but the problem was resolved. I was also having App store sync problems so I rebooted the iPad (hard reboot) and then immediately went to app store any updated all apps (video player want one of them) and after it was complete I did another hard boot/reset. When the iPad restarted I immediately went into the video player and Problem Solved! Nt sure how it resolved itself but it works without reloading the files. Never connected to my laptop or resync'dthe iPad but just did an update to all of my apps from the App store (there were 11 to update). Good luck with it.

Sound distorted after updating

I have iPod Touch 4th Gen, I was running the 4.2.2 iOS or something like that as it wouldnt allow me to update.
I found a way of updating last night by editing the host file, so I went straight to iOS6.
Since updating the sound is incredibly distorted. Tested with my iPhone 4S (iOS6) and working fine.
Looked around on forums and people had the same problem when upgrading got iOS5?
Done sound check etc and hasn't fixed the problem, it is 100% the update.
Any suggestions would be much appreciated.
Thanks

Sorry.
Try the standard fixes:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Websites look wrong after update to FF6

Typography of the website changes after the update to 6. No problem what so ever with IE or Safari. Also not with the 3.x version of FF

Any particular reason that you are rendering back to DVCPro HD? That's a non square pixel format designed for cameras not delivery of product, it is not suitable for DI (digital intermediates) or delivery to anything standard. I would do all my work in a standard HD 1920 X 1080 comp and render my DI and Delivery product to that frame size. AE will automatically adjust your DVCPro HD footage.
The only reason that I can think of to render to DVCProHD is to copy your footage back to tape or to storage cards to playback on a camera or DVCProHD deck, but if you have a capture card that you are using to output to tape, and I see you do, then your system will work with standard HD files just fine.
As far as the QT wrapper being broken, if you must render back to DVCPro HD the try the Adobe Media Encoder. It does a better job compressing things than the Render Cue.
As a last thought, do what Szalam suggestes, update.

Laptop Sound distorted after updating to Windiws 10

I have a HP Pavilion dv6 laptop which I have been using for some time now. I recently updated to Windows 10. Since then, my laptop's speakers do not seem to be working propery. There is a distortion in the sound and there seems to be a double echo when listening to sounds, especially when I am using headphones. The audio devide is IDT High Definition AUdio Codec. The device manager says that the device is workinh properly. However, the problem seems to be continuing. Is the problem due to the new WIndows system or do I need to update any drivers?

I have a HP Pavilion dv6 laptop which I have been using for some time now. I recently updated to Windows 10. Since then, my laptop's speakers do not seem to be working propery. There is a distortion in the sound and there seems to be a double echo when listening to sounds, especially when I am using headphones. The audio devide is IDT High Definition AUdio Codec. The device manager says that the device is workinh properly. However, the problem seems to be continuing. Is the problem due to the new WIndows system or do I need to update any drivers?

IPhone calendar color scheme useless after update

This past Thursday, I updated my iPhone with the update software. Since then, the primary colors of the calendar events have all been changed to muted colors. Unfortunately, the default color of my primary Outlook calendar events has been changed to light turquoise with white letters, rendering the letters unreadable.
Based on feedback received from the Apple Store, I did a hard reset, and then a full Restore, to no avail.
Has anyone seen this and do you know of a fix? Thanks, marc

This worked to fix color problems on calendar items synced over air via exchange. You might want to try this:
To fix funky calendar items:
Do not connect to computer.
Settings> mail contacts calendars > Click on the account you are having trouble with
Turn OFF Calendar sync
Wait ~30 seconds
Turn On Calendar sync
As calendar items push to the iPhone, you’ll see these items being restored and unique calendars assigned. This can take about ~30 + minutes or so. Also, it takes awhile to push, you may have to wait 15 minutes for push to initiate, depending on phone settings and time since last push. But… this fixes the problem.
Hope this helps. It worked for me without restoring iPhone to original settings.

Games color looks distorted after update

Similar Messages

Maybe you are looking for