Games don't work any longer
I have several games, some free and some purchased, that I have played quite a bit, but now they don't work. When I open them, they act like they are loading, but them I kicked out. This happens at different points during the load process. It has now happened to 3 or 4 different games. Does anyone have any idea why this happens or how to fix it?
Hey there,
One of the files may have become corrupted over time. One solution is to remove the games from your iPod altogether and then resync them to your iPod. If that doesn't work, restoring your iPod may be a good idea at some point as well. Just keep in mind, that restoring an iPod will erase all the music and files from the iPod so make sure they are backed up on your computer somewhere. Hope this helps.
Here is more information on troubleshooting games for your iPod.
http://support.apple.com/kb/HT1563
B-rock
Similar Messages
-
Recently purchased Mountain Lion and now several of my Big Fish games don't work, any ideas?
Mystery Case Files Return to Ravenhurst and MCF 13th Skull to name a couple
I have contacted Big Fish games and tried all the suggestion still to no avail.....If you "recently purchased Mavericks" without upgraded your hardware (MBP), then your MBP is still capable of running whichever flavor of OS X that you previously were able to run these 40% of Big Fish games.
In that case, partition your hard drive or add an external drive and install that flavor of OS X (Snow Leopard or Lion) there and "dual-boot" your MBP into the alternative OS X when you want to play those games using Startup Manager in the System Preferences before Restart. -
Hi there
So I just changed from an iphone4S to an iphone 5 because my screen didn't work any longer on the 4s but the phone itself still works so I managed to get all my contacts etc BUT for some reason I can't transfer all my music across to itunes and therefore I can't get it onto my new phone, it only transfers about 50% of it.
Then when i go into music on the iphone 5 it shows the music but won't let you play anything and just flicks through all the songs without playing anything.
Can anyone help please?
Thank youThank you - I thought that might be the case BUT why doesn't the music play that I have bought from itunes - do you happen to know please.
All that happens is it just flicks through it all and won't play any of it???
As in I select the song and it just flicks back one screen (if I am making sense).....
I am really stuck and cannot work out what's gone wrong that's all.
Considering a reset of my new iphone and trying again but done that once and it's still the same. -
Dragging to other applications doesn't work any longer
I used iPhoto before and back then I could easily drag pictures to Photoshop to edit them, to a LibreOffice document to embedd it or to a website within Chrome to for example attach it to an existing thread on Facebook.
With Photos, non of these works any longer. I could only drag it to the Pages app, which looks like Apple broke drap&drop in Photos. I do _not_ want to export or save pictures first somewhere in between to attach them as a normal file. I want drag&drop as before.Alley_Cat wrote:
Could the system be doing an actual modified export of some kind rather than a simple copy of the file?
Grrrr!!!!
I don't believe it - it has actually exported it modifying the original 1080p video and downconverting it to 720p.
The fact that you cannot easily view original images/movie files in their actual location via Finder makes such comparisons difficult but I know this was 1080p video.
Within photos:
File dragged to user's home folder:
Note change of file extension and resolution! -
ITunes funktioniert nicht mehr / iTunes doesn't work any longer
Hallo liebe Community,
ich habe seit gestern ein sehr ärgerliches Problem mit iTunes.
Seit gestern kann ich zwar iTunes noch öffnen, jedoch kommt bei jeglichem Versuch eine Verbindung mit dem iTunes Store herzustellen (sei es über iTunes Match oder Store oder meinen Account) die Windows 8.1 Fehlermeldung "iTunes funktioniert nicht mehr". Jegliche Versuche danach noch was zu machen schlagen fehl da sich das Programm dann automatisch schließt.
Was habe ich bis jetzt getan:
- einfache Neuinstallation
- komplette Neuinstallation (mit jeglicher Apple Software die auf meinem Pc war/ist)
- Bereinigung und Überprüfung des Pc's
- 1 Tag warten
- an und abmelden vom iTunes Store (war nur möglich bevor das Problem aufgetreten ist)
Nichts hat geholfen. Und jetzt habe ich einen Pc ohne Musik und allem anderen, weil alles in meiner iCloud ist. Kennt wer das Problem und kann mir zufällig helfen? Sämtliche Beiträge in den Apple Foren sowie in den Foren, die man durch Google findet, helfen nichts...und ja, ich habe die vorgeschlagenen Sachen ausprobiert.
daer community,
since yesterday it's still possible to open iTunes but at any try to get a connection to the iTunes Store (no metter if i try it through iTunes Match or Store or my iTunes Account) i'll get the Windows 8.1 error massage "iTunes doesn't work any longer". Any tries to do something after the error massage are useless because iTunes get closed by hisself.
What i've already done:
- simple reinstallation
- complete reinstallation (reinstalled all Apple softwares i've got at my pc)
- cleaned and checked my pc
- waited 1 day
- logged out and in at the iTunes Store (this was just possible before the problem appeard)
Nothing helped. And now i've got a pc without music and everything that i get from iTunes because all is in my iCloud. Does anyone know this problem and could help me solving it? All posts in the Apple forums and the forums you'll find with the google search are useless...and yes, i tried them all.
Vielen Dank,
Thanks,
Dominikhttps://discussions.apple.com/thread/5457433?start=0&tstart=0
This solved my problem after even the Apple Support couldn't help me! -
MRUFolders=TRUE - doesn't work any longer?
Colleagues,
I've got trouble with MRUFolders option on my PC... It doesn't work any longer just for me or for everyone?
LabVIEW 8.6f1 on WinXP Prof SP3.
can someone else check it for me?
Thank you,
Andrey.It's a known bug (CAR 113669)
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
What do you use to read .stn files on mavericks? Genuine fractals doesn't work any longer? I get an error message that adobe photo shop 5 cant open it because the modules? arent right. I assume that it is because I now have an intel machine. I know other people have used this file format and so how do you open your photo files?
When I try to open in Adobe Reader is says, "Adobe Reader could not open 'Blank-AF 77-LOE.xfdl' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)." Now what. I didn't email it. I transferred from an external hard drive. The file opens just fine on a Windows PC.
-
My password does not work for my IPAD any longer.
If you don't know your passcode for iPad, you have to restore your iPad as a new device in iTunes on your computer.
-
K7N2G-L + newly installed Sempron 2800+ = games don't work anymore
Hi folks,
I have upgarded my K7N2G-L mobo with a Sempron 2800+ Socket A Thoroughbred core and after that games installed on my computer stopped working. After clicking a game icon, the black screen is displayed for a moment and Windows XP returns.
I have formatted the HDD and installed Windows XP again, than installed drivers from mobo CD and at the end games. It didn't help. Everything is as before. I have upgraded BIOS to the newest version yet before I installed the cpu. Bios recognizes the cpu correctly. I have performed HOT CPU TESTER PRO 4.41 and the cpu is OK. FSB is set to 166 (333) in the bios as well as by jumpers. The cpu temperature must be ok because the cpu passed hot cpu tester pro with a 100% load for 6 hours. However games work when I change FSB to the 133 (266) and what's more they work when the fsb is set to maximum 158, higher fsb results with that games stop to work.
Any suggestions?Hi folks,
This is what I've found out about the computer:
Pole Wartość
Właściwości procesora
Typ procesora Unknown 2800+
Nazwa kodowa Thoroughbred-B
Seria B0
CPUID: nazwa procesora AMD Sempron(tm) 2800+
CPUID: nr wydania 00000681h
Szybkość procesora
Częstotliwość taktowania procesora 2004.12 MHz
Mnożnik procesora 12.0x
Procesor FSB 167.01 MHz (oryginalny: 166 MHz)
Magistrala pamięci 167.01 MHz
Pamięć podręczna procesora
Pamięć podręczna L1 kodu 64 KB
Pamięć podręczna L1 danych 64 KB
Pamięć podręczna L2 256 KB (On-Die, Full-Speed)
Właściwości płyty głównej
ID płyty głównej 08/02/2004-nVidia-nForce-6A61BM49C-00
Nazwa płyty głównej MSI K7N2 (MS-6570) (5 PCI, 1 AGP, 1 ACR, 3 DDR DIMM, Audio)
Właściwości mikroukładu płyty głównej
Mikroukład płyty głównej nVIDIA nForce2 IGP
Taktowanie pamięci 2.5-3-3-7 (CL-RCD-RP-RAS)
Command Rate (CR) 1T
Moduły pamięci SPD
DIMM2: Kingston K 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz)
Właściwości BIOS'u
Data BIOS'u systemowego 08/02/04
Data BIOS'u wideo 02/12/07
System i Urządzenia
Pole Wartość
Komputer
System operacyjny Microsoft Windows XP Professional
Dodatek service pack systemu operacyjnego Dodatek Service Pack 2
DirectX 4.09.00.0904 (DirectX 9.0c)
Płyta główna
Typ procesora Unknown, 2000 MHz (12 x 167) 2800+
Nazwa płyty głównej MSI K7N2 (MS-6570) (5 PCI, 1 AGP, 1 ACR, 3 DDR DIMM, Audio)
Mikroukład płyty głównej nVIDIA nForce2 IGP
Pamięć fizyczna 1024 MB (PC3200 DDR SDRAM)
Typ BIOS'u Award (08/02/04)
Port komunikacyjny Port komunikacyjny (COM1)
Port komunikacyjny Port komunikacyjny (COM2)
Port komunikacyjny Port drukarki (LPT1)
Ekran
Karta wideo Radeon X1650 Series Secondary (512 MB)
Karta wideo Radeon X1650 Series (512 MB)
Monitor Samsung SyncMaster 755DF [17" CRT] (HMARB06265)
Multimedia
Karta dźwiękowa nVIDIA MCP2 - Audio Codec Interface
Magazyn
Kontroler IDE NVIDIA NForce MCP2 IDE Controller
Napęd dyskietek Stacja dyskietek
Dysk fizyczny ST340016A (40 GB, 7200 RPM, Ultra-ATA/100)
Napęd dysków optycznych LITE-ON LTR-24102B (24x/10x/40x CD-RW)
Napęd dysków optycznych TSSTcorp CD/DVDW SH-S182M
Status dysków SMART OK
Partycje
C: (NTFS) 38154 MB (31033 MB wolne)
Urządzenia wejściowe
Klawiatura Standardowa klawiatura 101/102 klawisze lub Microsoft Natural Keyboard PS/2
Mysz A4Tech PS/2 Port Mouse
Sieć
Karta sieciowa NVIDIA nForce MCP Networking Adapter (192.168.1.101)
Urządzenia zewnętrzne
Kontroler USB1 nVIDIA MCP2 - OHCI USB Controller
Kontroler USB1 nVIDIA MCP2 - OHCI USB Controller
Kontroler USB2 nVIDIA MCP2 - EHCI USB 2.0 Controller
Urządzenie USB Masowe urządzenie magazynujące USB
Typ BIOS'u Award Phoenix-Award BIOS v6.00PG
Informacja z BIOS'u Award W6570NMS V4.1 080204 13:14:21
DMI: numer wersji BIOS'u 6.00 PG
Czujniki
Pole Wartość
Właściwości czujnika
Typ czujnika Winbond W83627HF (ISA 290h)
Nazwa płyty głównej MSI K7N2 Series
Temperatury
Płyta główna 42 °C (108 °F)
Procesor 52 °C (126 °F)
Seagate ST340016A 42 °C (108 °F)
Wentylatory
Procesor 3013 RPM
Wartości napięć
Napięcie rdzenia procesora 1.62 V
Aux 2.19 V
+3.3 V 3.30 V
+5 V 5.13 V
+12 V 12.22 V
-12 V -12.36 V
-5 V 3.55 V
+5 V podczas wstrzymania pracy 4.99 V
VBAT baterii CMOS 2.75 V
Debug Info F FF 70 FF
Debug Info T 42 52 06
Debug Info V 65 89 CE BF C9 1F E0 (01)
PSU is MODE COM FEEL 300W
Games that don't work are those requiring advanced 3D: Cossacks 2, Ceasar IV, czy Elder scrolls: Oblivion, CS: Source
Older games work, like: Counter Strike 1.6
Any suggestions?
What cpu was instaleld before sempron, I will post soon as well as the current strenghts for each voltage. -
My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!
I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off? -
Hi everybody,
I have an ADF application. it was OK But when I copy my application to another system and run via it's JDeveloper, nothing work correctly, without any error messages !?. I mean navigation button in form don't work , tree is not shown, some tables don't correctly render ... .
I think when an application is run and deployed in JDeveloper, it create a folder in "...\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs" path contain deployed files that there is not in other systems and also there is some files in Temp folder in windows that is related to my application so I think because of these files my application don't work correctly in other system!! I don't access to my system and my original application so what should I do ???
I use JDeveloper 11.1.1.0.0.
please help me.
with my best regards.What exactly do you mean by 'copy'? Did you copy the workspace from pc a to pc b?
Did you recolpile the app on pc b?
Did you check if all connections (DB) are reachable?
Timo -
Preview isn't working any longer
Since yesterday the Preview app isn't' working. I cannot see any picture with it any longer, nor does it open when I try to open the app itself. ANyone knows how to fix this or where I can download it again?
Try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your apps function correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to Users/(yourname)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
-mj -
After uninstalling Google Chrome links in e-mail don't work any more
I have Firefox on my computer. I wanted to try out Chrome. After uninstalling Chrome and reinstating Firefox as my default browser, several things don't work properly, especially links in emails. I tried suggested solution of changing registry key for .html from ChromeHTML to htmlfile or FirefoxHTML but neither works. I just want to be able to click the link and open up the relevant web page.
As someone else has this problem I reply to my own question. Only uninstallling and reinstalling Firefox cures the problem.
-
After installing Update 10.6.2 Server Netboot don`t work any more
After installing the combo update 10.6.2 Server Netboot dont work any more.
This is the log oft from Serveradmin Netboot:
Nov 10 15:53:48 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:53:48 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:53:48 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:53:48 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:53:48 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:53:48 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:53:48 xserver01 bootpd[1783]: service time 0.001230 seconds
Nov 10 15:54:04 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:54:04 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:54:04 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:54:04 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:54:04 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:54:04 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:54:04 xserver01 bootpd[1783]: service time 0.001111 seconds
Nov 10 15:54:17 xserver01 bootpd[1783]: DHCP DISCOVER [en0]: 1,0:24:81:12:e1:81
Nov 10 15:54:17 xserver01 bootpd[1783]: replying to 10.0.50.97
Nov 10 15:54:17 xserver01 bootpd[1783]: OFFER sent <no hostname> 10.0.50.97 pktsize 300
Nov 10 15:54:17 xserver01 bootpd[1783]: service time 0.016331 seconds
Nov 10 15:54:17 xserver01 bootpd[1783]: DHCP REQUEST [en0]: 1,0:24:81:12:e1:81
Nov 10 15:54:17 xserver01 bootpd[1783]: replying to 10.0.50.97
Nov 10 15:54:17 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.97 pktsize 300
Nov 10 15:54:17 xserver01 bootpd[1783]: service time 0.000840 seconds
Nov 10 15:54:37 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:54:37 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:54:37 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:54:37 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:54:37 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:54:37 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:54:37 xserver01 bootpd[1783]: service time 0.015980 seconds
Nov 10 15:55:41 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:55:41 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:55:41 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:55:41 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:55:42 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:55:42 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:55:42 xserver01 bootpd[1783]: service time 0.686362 seconds
any ideas!??! The client is a MacPro G5Please refer Troubleshooting EMCA Failures in
Master Note for Enterprise Manager Configuration Assistant (EMCA) in Single Instance Database Environment [ID 1099271.1]
Thanks.... -
Flash Player - FB games don't work
While playing games on Facebook (I know), Flash Player crashes and the games don't load.
Thanks. Can you please provide us with a copy of your systems dxdiag report (see the steps listed here: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_For_Windows_users), the output from the page "about:support" in Firefox, details on your virus scanner used, and some specific steps to reproduce the crash?
If you can give us a few recent entries in on the page "about:crashes" that might also be helpful.
Thanks,
Chris
Maybe you are looking for
-
hi, here i m trying to install oracle 8i on window xp platform but there was an error called "ORACLE NOT FOUND" please give me the solutions for this.It will be very helpful in my project
-
How can I activate my old iPod classic?
I thought that my iPod classic had been stolen a while ago and eventually went out and bought a new one. Now, I have found the old one - it had slid down behind a rather large piece of furniture in my house and needless to say, I'm thrilled to find i
-
How to connect 11" Air to a digital projector?
I need to connect my new 11" air to a digital projector. What cable can I use. Can't find a thunderbolt to mini-dvi or hdmi.
-
Is there a tutorial on - how to call static java methods
I have defined external JAVA resource using a .jar file and have successfully catalogged the same. Now I need to pass variables to a static method in a class and also get the return variable mapped into a BPM variable. Can someone share sample Java I
-
Hi, How are you experts., for keyfigures to segregate what are the data types., the few i know is amount, unit, currency and if any others please let me know on it., As i have to design datamodels based on reporting requirements where for infocu