Gaming-Graphics problem with MacBook White Unibody (Late 2009)

Hello there, this is going on:
When I open any game (like call of duty 4) it seems to work ok, 90-125 fps as it should be (800x600 minimum graphics), and this happens the first 5-10 minutes i'm playing, then it starts to seriously lag itself, FPS goes down to 30-40 fps with a veeery poor performance, unplayable, for like 5-10 minutes, and then it starts to work fine again. I can't exactly explain it, but I don't see the fans running faster, they stay steel, the MacBook starts to heat a little and that's all I can tell.
I though this was a Mac OS X problem with the video card, but same thing happens on Boot Camp, with Windows 7, with ANY game i'm playing. Then I tried to restart the PRAM and SMC, but I don't have any solution.
Is this a Hardware problem? Is this happening just to me or is there anybody who has this problem, too? Help! and thanks in advance.

I have had this problem for the last year with iRacing and lately F1 2010.
In good news, I seem to have solved it last week. I did some googling and saw a few posts that suggested it could be due to the GPU overheating. To test this I downloaded and installed Speedfan in windows and smcFanControl in OSX.
Both apps will enable you to monitor the temp of your CPU and GPU. I noticed generally in OSX the GPU hits a max of around 72 degrees Celsius. When I switched to windows and fired up iRacing and then F1 2010 I noticed it was all fine till the GPU hit around 90 degrees Celsius. At that point it the FPS drop kicked in and I went from 70 odd FPS in iRacing to 20 FPS.
To get around the problem, You can turn up the fan speed, which will stop the GPU from getting so hot. Unfortunately for a reason I don't understand SpeedFan will not allow you to control the speed of the fan in windows. So you need increase the speed to 5000 - 6000 RPM using smcFanControl in OSX. If you restart then fire up Windows the fan speed will stay at the higher rate you have set.
Since I started doing that my FPS drop problems seem to have disappeared.
The problem is if you then put windows to sleep, when you wake it up again the fan will go back to the default speed. So if you need shut the lid of your laptop, you have to restart to Mac OSX, then set the fan speed, the restart to windows. Painful but better than FPS drops.
If anyone has any other thoughts on any of this stuff I would love to hear it.

Similar Messages

  • Serious Graphics Problems with Macbook Pro 15'' Retina

    Hi
    even before and especially after having installed the latest updates for Mountain Lion I'm experiencing serious problems with my Macbook Pro 15'' Retina notebook. Have a look
    http://www.youtube.com/watch?v=zt0tS8KJKuQ&feature=youtu.be
    Does anyone else have this kind of problem? It's not the only problem I had with my Macbook Pro Retina and the Mountain Lion OS but as of now the most troubling one.
    Best regards

    OS X: Login window partially appears, cursor movement redraws screen

  • Graphic problems with Macbook Pro Late 2011 13"

    I'll try to explain it as clear as possible. This started to happen a couple weeks ago:
    My Macbook screen started to being white-blurred, and the image slows down while this happen. At first I thought that was happening randomly, but then -I guess- I realised that it was lid-related; when I open the lid more than 90 degrees the problem started to happen, sometimes it starts to happen even if the lid is in its 'working fine area' though , but after moving the lid up and down several times, it gets 'fixed'... until it happens again. There are times when it doesn't get fixed instantaneously, and it's really driving me crazy.
    My first thought was that it might be the flex (not sure if this is the right name of it tough), I mean the cable that goes from the screen to the logic board. If so, or even in another case scenario, I have an Early 2011 Macbook Pro 13" where I can use any part, except for the logic board, if needed.
    Thanks in advance.

    Well the Apple logo will always be visible through the screen when there is a fairly bright light behind the screen.
    That is totally normal.
    As for the freezing and since this is your first Mac computer I would like to make you aware of one thing.
    The way Mac OS X operating system works is slightly different then Windows. In Windows when you click the X in the upper right hand corner of the program you are using that program closes freeinig up the memory it was using. In the Apple OS, OS X, when you click the X in the upper left hand corner of the windows you are using all that does is close that active window. It dos not close the program. So if you have started up 2-3-4-5-6 programs to do something in them and then clicked the X all you have done is closed those windows for all those programs. The programs is still running. So you can end up with several programs using memory when they shouldn't be. You have to actually close those program by first using Command+Tab to see what programs are still open then go to the menu bar on the right side where the name of the program is displayed and click on that name and select Quit Program Name. Or once the name of the program is in the menu bar press Command+Q (Quit) to close that program.
    Get in the habbit of always using that keyboard shortcut when you are done using a program.
    Having multiple program open will cause the system to run slow.
    The hard drive Apple is putting the newer Macbook Pros are of the slower type. Running at 5400RPMs as opposed to the faster 7200RPM models. Why I don't know as the faster drives don't cost that much more. Because of this all program run slightly slower. To open, to save files to and when used as a swap disk to expand on the physical memory in the computer. Which in turn will make the system seem sluggish and can casue some freezes.
    So make sure you have closed all programs before opening another, and only have at the most 2-3 progams open at the same time.

  • Graphics problems with macbook pro retina mid 2012

    It seems like I've started having graphics issues after installing the latest firmware upgrade. At seemingly random times, I start getting graphics garbage showing on my screen. Here is a screenshot:

    I'm also getting some really bad sound quality on facebook notifications. I've been forced to disable them they sound horrible like they are clipping.
    Trying to figure out if this is a problem on all Late 2013 15" macbook pros or if mine is defective? This occurs even at around 20-30% volume levels with the Facebook notification sound problems...

  • Problem with Macbook Pro 15 (Late 2007)

    What I did is that I tried to install a 500gb threw the macbook. Then suddently, the macbook pro did not wanted to reconize the gb that I put in. I tried all the shortcut keys and none of them work. It only stayed with a Apple Logo with the circle on the bottom spinning. It freezes sometimes. I tried everything, & it still freezing and did all the trick.
    Yesturday, It did not decided to turn on. The screen did not want to turn on. The blinking light on the bottom did not want to turn on also. I clicked on the power on but it actually turned on but the screen and the blinking light did not wanted to turn on. I tried on the keyboard, & it did not wanted to turn on the lights. I tried everything my best to get it back working.
    Please help me with this problem. Maybe for me I think its the logic board. I'm not sure because once I got it, It was working 100% except for the apple and circle on the bottom spinning.
    Thank you for reading and helping,
    DaddyCorrupted

    You must first prep the new drive then install OS X on it:
    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • Graphics problem with mbp late 2008,nvidia geforce 8600m gt.any help?

    Hi,have graphics problems with my MacBook Pro 17" Late 2008.Every 3-4 days the graphics are not ok and when i want to restart there is only the apple logo but not clear and the cursor seems to be double.Sory my english is not the best.Any help for this Problem?

    Get your computer to an Apple Store Genius Bar ASAP to be tested for the problem described in this article:
    http://support.apple.com/kb/TS2377

  • Change MacBook Unibody late-2009 logic board with a MacBook Unibody mid-2010 logic board

    Hi everybody!
    Is it possibile to change my MacBook Unibody late-2009 logic board (2,26 Ghz) with a MacBook Unibody mid-2010 logic board (2,4Ghz)? If yes, I have to change trackpad too?
    Thanks in advance!

    GPU is in the logic board too (take a look: https://it.ifixit.com/Teardown/MacBook+Unibody+Model+A1342+Mid+2010+Teardown/293 1).. So what's the problem?

  • Do I have to back up the data of my macbook white unibody if I am changing the screen because of the crack problem at the the back of the screen?

    Do I have to back up the data of my macbook white unibody if I am changing the screen because of the crack problem at the the back of the screen?
    They told me to bring it to the genius at the apple store. They will change it for free but I don't have any physical place to back up my computer, they said it will take a coupe of days. I am not really sure if I have to back it up.
    Thank you.

    gmedina172 wrote:
    Should I use time machine? ...
    Mac 101  Time Machine  >  http://support.apple.com/kb/HT1427
    Time Machine Tutorial  >  Time Machine Tutorial
    Video on Restore From Time Machine
    http://support.apple.com/kb/VI29

  • I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared

    I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared without Doing anything!!
    And now I can't use the " tap an click " from my tack-board and no nothing was spilled on my mac.
    Please help  

    Check your login items in the Users & Groups preference pane. Remove any that you don't recognize.

  • MacBook Pro Unibody (late 2008) crash when using GeForce 9600M GT

    Every time I do heavy 3D rendering or play 3D games (such World of Warcraft) with the NVIDIA GeForce 9600M GT, after few minutes my MacBook Pro (unibody, late 2008) freezes, black screen and audio looping, no actions possibile, only hard shutdown... No problems with the 9400M.
    What should I do? Get a replacement?

    I've had mine for a little less than two months and I noticed the overheating shortly after I got it. I think it's mostly because the fans don't spin up soon enough because the SMC controller on mine does not work properly and even if you reset it, it reverts back to only spinning the fans after a cpu/gpu temps over 90 degrees Celsius (almost boiling point!).
    Mine is currently in for service but I'm being told that they haven't been able to duplicate the issue so I don't understand what method of testing they are using. I hope they don't keep my computer in repair for a long time. I know that if I fire up the Black & White 2 Demo, Call of Duty 4, or Spore and play for about 10-20 minutes the computer crashes if the fans don't spin up... Apple released a firmware update for the SMC controller but it doesn't apply to my model which is a MacBookPro 5,1 , maybe Apple doesn't realize yet how widespread the fan problem even on the late 2008 model is but it needs to be resolved and a third party utility to control the fans should not be necessary on the finest laptops available on the market. I'm confident that they will come up with something...
    http://discussions.apple.com/thread.jspa?messageID=9115055&#9115055

  • Mac OS Leopard 10.5.8 in MacBook White Unibody

    This machine came´s with 10.6.1, but we are trying to replace 60+ older portables and actually have more than 500+ deployed, the company´s software is really an issue and the new Snow doesn´t allow to run certain apps that are "critical" to the company´s executives, does anyone knows if there are possibilities to downgrade, installing 10.5.8 into another "similar" machine, e.j. MB Alluminium that came with 10.5.7 and "cloning" the resulting HD into a the new MacBook White.

    Absolutely NOT true. I have just booted from and then cloned over a 10.5.8 OS from an external hard drive to a 2.26 MacBook UniBody (Late 2009.) The MB works with this OS, along with all factory-installed apps.
    There are two things that do not work correctly on this particular model MB however (thus lending credence to the claim of lack of hardware support.) These things are: [1] the keyboard control of screen brightness (and the corresponding System Preference) does not work -- although the default screen brightness is fine; and, [2] the volume keyboard control keys (and the corresponding System Preference) does not work. Obviously, this is more serious of a deficit, but I can imagine certain people out there who could live without any sound emanating from their MacBook.

  • Graphics Problems with Log in screen and iPhoto

    I have been having some problems with my brand new MacBook Pro. The graphic card seems to be going broken sometimes and it seems to be happening more often.
    MacBook Pro 1
    First I bought a new mac to replace my old one, i restored it from a Time Machine back up. When my MacBook Pro went to sleep the screen turns black and you click and the screen blocks up and more of the screen unblocks as you move the mouse, I never experience this problem with my old MBP. So I took it back to the shop where they gave me a brand new one, they said it was clearly a graphics problem.
    MacBook Pro 2
    I installed the time machine back up straight away and I experience the same problem again and a few days later a iPhoto problem happens again lots of times. Examples of what happens are in the video pasted below.
    Link - http://dl.dropbox.com/u/32131902/Mac%20Problems.m4v
    Does Anyone Know The Problem?

    MacBook Pro 2 is the replacement they gave me

  • Problem description: (MacBook Pro 15" late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open.  Randomly freezes and becomes unrespo

    Problem description:
    (MacBook Pro 15” late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open.  Randomly freezes and becomes unresponsive, requiring forced power down.  Randomly logs off.  Removed Kodak AIO software via Clean My Mac2, but BonjourAgent still there and requesting access.  Cleaned weekly with Clean My Mac2 and running Sophos AntiVirus. 2GB memory installed.  Currently 169.99 GB available of 249.2 GB capacity.
    Help?
    EtreCheck version: 2.1.8 (121)
    Report generated March 21, 2015 at 11:35:35 AM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Late 2008) (Technical Specifications)
        MacBook Pro - model: MacBookPro5,1
        1 2.4 GHz Intel Core 2 Duo CPU: 2-core
        2 GB RAM Upgradeable
            BANK 0/DIMM0
                1 GB DDR3 1067 MHz ok
            BANK 0/DIMM1
                1 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 59
    Video Information: ℹ️
        NVIDIA GeForce 9400M - VRAM: 256 MB
            Color LCD 1440 x 900
        NVIDIA GeForce 9600M GT - VRAM: 256 MB
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:13:37
    Disk Information: ℹ️
        Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 249.20 GB (168.91 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GS21N 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple, Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [not loaded]    com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.leapfrog.codeless.kext (2) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.kodak.BonjourAgent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.leapfrog.connect.authdaemon.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
    User Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    User Login Items: ℹ️
        Dropbox    Application  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        AmazonMP3DownloaderPlugin1017265: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 [Click for support]
        Google Earth Web Plug-in: Version: 6.0 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        Disconnect
        Add To Amazon Wish List
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        Tuxera NTFS  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 249.20 GB Disk used: 80.29 GB
        Destinations:
            Backup [Local]
            Total size: 63.67 GB
            Total number of backups: 1
            Oldest backup: 2015-02-23 16:16:08 +0000
            Last backup: 2015-02-23 16:16:08 +0000
            Size of backup disk: Too small
                Backup size 63.67 GB < (Disk used 80.29 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             1%    loginwindow
             0%    AppleSpell
             0%    SophosUIServer
             0%    SophosAntiVirus
    Top Processes by Memory: ℹ️
        118 MB    InterCheck
        101 MB    SophosScanD
        60 MB    Dropbox
        54 MB    mds_stores
        41 MB    SophosAntiVirus
    Virtual Memory Information: ℹ️
        49 MB    Free RAM
        682 MB    Active RAM
        652 MB    Inactive RAM
        315 MB    Wired RAM
        1.49 GB    Page-ins
        2 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 21, 2015, 11:18:52 AM    Self test - passed
        Mar 21, 2015, 10:53:03 AM    /Library/Logs/DiagnosticReports/SophosUIServer_2015-03-21-105303_[redacted].cra sh
        Mar 19, 2015, 07:59:03 PM    /Library/Logs/DiagnosticReports/CalNCService_2015-03-19-195903_[redacted].crash

    Linc Davis wrote:
    Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
    Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.
    Memory in the MacBook Air is not upgradable. If that's what you have, you should restore the previous system from a backup, or replace the machine. Ask if you need guidance.
    The Etrecheck report clearly shows that SylvieRose has a Macbook Pro, not a Macbook Air and that there are only 2 GB  RAM installed.  The Etrecheck report can be very informative if one takes the time to examine it. 
    Ciao.

  • Problem installing Windows 8 via Bootcamp on MacBook Pro 13 (late 2009).

    Hello,
    I've installed Windows 8 Pro on my MacBook Pro 13 (Late 2009) which does not support Windows 8. I've started installing Windows 7 via Bootcamp, then interupted the installation and pluged-in the Windows 8 Disk, and after formating the partition, I've installed Windows 8 64-Bit.
    Here is the problem. The Windows works fine, BUT after restart when I hold 'Alt' and choose EFI Boot (Windows 8's partition), Windows 8 starts loading but then suddenly there is a white flash and it restarts again. So after shut down or restart I cannot boot it.
    Do you think that this is because I do not have Bootcamp installed on the Windows 8?
    I've downloaded the supported software for Windows 8, but when I click setup.exe, it is giving me the following error:
    This version of Bootcamp is not intended for this computer model. I've been trying to install it for more than 78 hours, so I'll be extremely gratefull to whoever help me. Thank you in advance.
    P.S. Mac OS X partition boots fine.

    If it is really not possible, I get it. But there are plenty of people that are running Windows 8 on the same model, that is powerfull enough to run Win 8. I'm actually running it, but until shut down or restart . Can't I edit Info.plst file alternative for Windows 8 like I did to allow BootCamp to image burn my USB on my model? I mean my model is same as the next one. I can't see why the drivers for mid 2010, won''t work on mine...

  • I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes

    i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later.

Maybe you are looking for

  • S_ALR_87013643 Cost Center Report - Range Orders

    Hi, I am executing T Code S_ALR_87013643, which is based on Cost Center, Cost Element and Order. I am restricting the selection for 1 Production cost center and 1 Production Order. The cost center section of the report is displaying costs against the

  • Psd files open as blank

    I downloaded a large number of sample photos in .psd format.  The psd files are about 60megs each.  The files open in CS5 Phootshop to what looks like a blank image (light and dark checkerboard squares) possibly what you might expect if you started t

  • ALV using REUSE_ALV_GRID_DISPLAY question

    Folks, I am use REUSE_ALV_GRID_DISPLAY for ALV report. I have customized the tool bar to have 3 to 4 columns as editable. In the FORM USER_COMMAND of ALV, at SAVE, you can check the field name and update your internal table and report the changes. No

  • Quicktime alternative screwed up apple quicktime & itunes

    i installed quicktime alternative to try it out. big mistake! no quicktime files would play. period. within firefox or ie or even from the harddrive. (actually, i could right click a file and open with vlc, but that's a pain to do every time) i unins

  • Counting Records based on Time

    Hi, This is my Records Date Rolls 09-oct-12 08:00:00 10 09-oct-12 08:00:50 20 10-oct-12 07:00:00 5 10-oct-12 10:00:00 10 Morning 8 to next morning 8 o'lcock to be taken as single day. Output: 09-oct-12 35 (10+20+5) 10-oct-12 10 Pl. help How to achiev