Gaming in Bootcamp and video problems

I just got my new base model iMac yesterday and after I had it setup I installed a fresh copy of Windows 7 and then installed Everquest 2. When EQ2 launched though I ended up getting what is ultimately a DirectX error saying it couldn't run 3d effects. I ran dxdiag and it seemed none of the 3d functions are available.
I checked the video card in system properties and it is just appearing as a standard VGA card. I double checked with the Apple website and it is supposed to be ATI Radeon 5670 with 512mb of video ram.
I am sure Windows 7 isn't identifying the card correctly and that is the cause of my problems. Has anyone came across this problem and if so how can I fix it?
I haven't installed Steam as yet but when I do I have some Windows only games and don't want to be stopped by playing becuse of it.
Thanks

It sounds like the video drivers didn't install from when you put the Mac OS DVD in to transfer all the drivers to Window 7 that are required.
Have you tried "Windows Update" yet and see if it updates it?
Did EverQuest 2 possibly install old drivers?
Worst case scenario you might try reinstalling Windows and try again.
You might try this link?
http://support.apple.com/kb/TS3173
I'm not sure if this includes your version or not? This say's it pertains to the late '09 27"iMac and the mid '10 21" iMac but I don't know if this might work anyway? It "kinda sorta" refers to your problem. It involves starting over with the Windows 7 install though.
Hope this helps....

Similar Messages

  • Premiere Pro CS6 importing/ audio and video problems

    I recently recorded gameplay from my xbox, when i open this recording using windows media player it states that the video is 3 hours 30 minutes long, which is correct, when i then import this into premiere pro, premiere pro changes it to be 5 hours and 44 minutes long, when i then play this back it plays in slow motion and audio and video start to desync, i thought it may just be the source editor playing up so i made a clip and put it into the timeline and it still had the same outcome. The speed/duration are still on 100% so im not sure what to do, anyone have any idea as to what this is, or why it is happening?

    What are the attributes of your PVR video...
    specifically, is it variable frame rate?
    Media file evaluation utilities:
    GSpot
    http://www.headbands.com/gspot/
    MediaInfo
    http://mediainfo.sourceforge.net/en
    If it is VFR, Premiere no-likey.
    Variable frame rate video problems:
    http://forums.adobe.com/message/4897424#4897424
    http://forums.adobe.com/message/4071506#4071506

  • Photo and video problem

    Hi first post, just got a Z1 and loving it but I am having trouble viewing photos and videos. When taking a photo it shows it has taken on the camera screen but when you view in the album it is a black picture with a mountain on it.
    Also when I take any video it shows the play symbol on the album page but when you press play it says "cannot play video" what am I doing wrong?
    I wanted this phone for the good camera but at the minute i have to still use my xperia S. I need help as I am going on holiday and wanted the Z1.
    Thanks
    Stu

    I was just looking to see if there was any problems and came across this which sounds like the same problem, or am I wrong, sorry but I'm not that technically minded on these things.
    I also saw there was a new update (kit kat 4.4.4) but it says my phone is up to date, do you have to wait until Sony sends it out?
    http://www.xperiablog.net/2014/03/20/before-upgrading-to-kitkat-be-wary-of-sd-card-restrictions/

  • N8 picture and video problems.

    I recently bought a N8. Had problems with the phone freezing and restarting on its but after doing a software update, it seems  to be working fine. Now my problem is that I cannot view the pictures and videos that are pre-installed on the phone. When I click on the photo icon on the home screen, it takes me to the photos and shows me a brocken thumb nail. Can anyone pleasehelp me with this. Pleas please please.

    has anyone else had this problem? I use t-mobile and i believe i have the texting problem when i text people on verizon. I've used other phones using the same sim card and never had any of these problems texting people on verizon. does that mean its a hardware problem? It doesn't seem like anyone else is having these problems.

  • SCCM 2012 Client and Workstation Audio and Video Problems

    SCCM 2012 SP1 environment.
    We have pushed out the SCCM Client successfully to our systems - however we have found that on some computers the SCCM Client is causing an audio/video problem - specifically it appears to be with computers that connect monitors via DVI.  As an example,
    on my laptop (Dell e6420, Win7 x64) I have a docking station that connects my laptop to 2 external monitors.  With the SCCM Client installed I cannot listen to music or watch videos - the result is an unusable choppiness/stuttering listening to music
    and with a video the audio and video get out of sync.  As well, my mouse no longer functions smoothly - it jumps around.  This happens whether accessing content from a website or simply a local file on my computer.  If I uninstall the SCCM client,
    the issue goes away entirely.  I have tried disabling the SMS and Remote control services but doing so does not resolve the issue, only a client uninstall. Note that this only happens when the laptop is on the docking station - with DVI - it doesn't
    happen when the laptop is running without an external monitor or if plugged into an HDMI output device.
    At first we believed this was limited to this model of laptop in our environment (Win8 or Win7 - both result in the same problem), but now we are hearing about "audio and video issues" on Dell 990 workstations as well.  I believe these stations
    have DVI connected monitors.  Driver updates do not appear to resolve the issue.
    Has anyone experienced this in their environment?  Note that this happens on imaged workstations and workstations installed from a vanilla Windows 7 or 8 CD.

    Try installing the client without Silverlight and see if it helps (this is only used for the Application Catalog).
    ccmsetup.exe /skipprereq:silverlight.exe
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Skype V. 7.6 (409) Mac audio and video problems

    I am getting inconsistent problems with audio and video. Here are the problems when calling three different contacts.
    1. Audio to Audio worked fine with my first contact, but trying to add video crashed the audio. This happened when I tried to add video, and also when the other person tried to add video. These same problems persisted regardless of who called whom. In the end, we had a good audio to audio conversation and were also able to send messages and share files without problems.
    2. My audio and video were received by the second contact, but I could not receive audio or video from them. These same problems persisted regardless of who called whom. In the end, I used audio and video while the other person typed messages in response.
    3. My audio and video were received by the third contact, and I could receive their video, but they could not hear my audio. These same problems persisted regardless of who called whom. We didn't bother trying to continue our conversation.  
    So, I checked all my settings to ensure audio and video were properly set up. Also, I made a successful skype test call. It is very puzzling to me since the results were inconsistent with each of these contacts. If the same problem existed at my end, then I could expect a hardware or driver issue on my computer, but sometimes the other person had the problem, I think. Can anyone help? Cheers

    Lueh, try the steps outlined in the KB below. Looks like there is an issue with the full text index that can be resolved by removing/rebuilding.
    http://blogs.skype.com/2015/03/18/skype-7-6-for-mac/
    Please feel free to get in touch if you need any help.
    Cheers,
    Lando

  • Ichat audio and video problem

    my ichat audio and video don't work with any of my friends, no problems with a text chat, i'm using tiger and they all have leopard, all macs are up to date, i've tried messing around with the ports, firewall is off, internet sharing is off, i know a lot of people are having this problem, are there any answers to this that actually work, i'd appreciate any help

    Hi Ben
    Welcome to the  Discussion Pages
    Presumably you mean this Linksys is set to Not Block Pings on the WAN port (Or whatever phrase your device has) ?
    I also presume that you have done the Quicktime Setting that Steve mentions above ?
    I presume the Linksys is the modem as well and it is doing UPnP ?
    At this stage I have two suggestions.
    1)
    Shut down the computer and remove the Ethernet cable (modem or computer end does not matter) (Make sure it will not connect Wirelessly when restarted before hand)
    Restart the computer
    Restart iChat.
    Reconnect the Internet
    Log iChat in.
    2) Try a reinstall of the COMBO version of the 10.5.2 update
    Both of these suggestions have been used in previous iChat's when other things have not worked and the set up appears OK on the surface.
    Also try
    3) Rebooting the router and a Modem if separate.
    4) In System Preferences > Network > Connection method > Advanced Button > DNS tab add the DNS servers of your ISP
    DO them one at a time so you know which one works.
    8:26 PM Friday; February 29, 2008

  • HP Envy dv6 sound and video problems

    I bought my laptop just over a year ago. In the past two days, it's developed problems with both video (video loads but freezes, usually at .02 into the video), and with audio, which works fine for a few minutes after start-up, but then goes out. The problems occur whether the video or audio is in a browser or a dvd or a downloaded file. Further, the mute button is unresponsive at those times - when I hit it, it doesn't change (turn red for mute). I found one response in the forums but it was for a different Envy model (mine does not have a Beats button). I tried it anyway but it didn't work. Halp!

    Hello unerenarde, welcome to the HP Forums.
    It appears that you have an issue with the audio and video on your notebook. That this occurs from multiple sources. I will try to assist you with this.
    I would first recommend updating all drivers. To do this use the HP Support Assistant. This tool will check what drivers need to be updated and provide them to you.
    After that, take a look at these documents:
        No Sound from the Speakers or Headphones (Windows 7)
        TV and DVD Video Playback is Choppy and Skips
    The titles may not be exact to what your issue is, but the steps might be helpful.
    If those fail to assist with the issue, please reply back with the Model and Product numbers for your notebook, as well as the currently installed operating system.
    Let me know how this goes.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Sound and video problems?

    ok here is the deal, i got all the latest drivers for my system.
    i got the
    MSI 875P NEO LSR mainboard
    p4 3 ghz with HT
    with 1024mb ram
    160 gb s-ata
    geforce fx 5600 XT/256 mb
    soundblaster live 5.1 sound
    when i play heavy games like HALO or Need for speed my sounds and video works not correct BUT it should not be a problem because my amd 1800+ with gforce ti 4200 did better  
    i think it's the mainboard but does ANYONE has an solution or the same problem?
    o yeah my system reboots sometimes when i put new hardware on it (had it with my USB modem 4 ADSL)

    This sounds like it is your PSU giving troubles. What wattage is your PSU, and what are the 3.3v, 5v and 12v ratings on the PSU? (You can find out this info on the sticker that is attached to the PSU)

  • Ipod Photo and Video Problems

    my Ipod 5th generation recently got the IOS 8 update. Don't get my wrong i love it but it's deleting my pictures as I get more. It's driving me insane. It's deleted my pictures from the time I got it (March 25ish) to about 3 weeks ago. i went from a bout 800 videos and photos combined to not even 85 photos and video combined. Fix this!!!!!

    Try restoring from backup.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    ALso see:
    Where did photostream and Cameraroll go in iOS 8?
    http://www.macworld.com/article/2359708/icloud-meet-photos-whats-changing-for-yo ur-images-in-ios-8.html

  • Big Trouble! Manually manage music and videos problem

    Alright, so I've just checked the Manually manage music and videos box. But now when I uncheck it, it says that all my existing content on the iphone will be replaced with the content on my iTunes library. The thing is, I just clean out my entire itunes library so if i uncheck it, all my music will be gone. Help please.

    Smellfry wrote:
    .... The thing is, I just clean out my entire itunes library
    Why?! Where is your backup?
    New empty library or did you clean out the existing one? If the latter then steps 1 & 4 aren't really necessary.
    You should be able to:
    Backup the device.
    Transfer your purchases into your authorized library.
    Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
    Restore the device from the backup. This process should switch the association of the device to the new library, preserving the data and settings in your apps.
    May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
    When you get it all fixed, make a backup!
    tt2

  • Final cut pro x, audio and video problem

    hi I converted a DVD video movie by DVD converter in order to use it in FCP but when i inport into FCP the audio and video does not line together, I mean the person will speak and the voice follows after. HELP PLEASE!!!

    I used a media converter that I downloaded from apple store. I cant really see any option to choose the audio format, sampling .......etc the options on the converter are:-
    1. Audio stream which is greyed out,
    2. Output format {H.264 video, MPEG 4 etc.}
    3. Video Quality { Highest, High, Normal, Lower, Lowest}
    4. Audio Quality { Highest, High, Normal, Lower Lowest }
         basically I have no clue how to do it  I am a bit new in this world of computers, can you tell me how to to it  
         please
    Thanks
    Duncan

  • Audio and Video Problems

    I updated my software and now audio and video do not play.
    Product#C3Q25UA#ABA
    Serial Number# [Edited for Personal Information]

    PS. I have windows 8

  • HDMI audio and video problems on new DV6t se

    Just received my HP Dv6t laptop and i immediately upgraded to Windows 7 ultimate. I am facing two problems,
    Firstly, if i disconnect and reconnect the HDMI cable the sound only comes from the speakers and not the monitor (works fine with my HP HDX16t laptop using the same hardware). I set the HDMI sound to default when the HDMI cable was connected to my monitor. But when i tried to do the same thing when its disconnected i dont see the HDMI option (i already ticked the "Show disabled/disconnected devices" tab).
    Secondly, i use an ASUS monitor for work purposes and a SONY TV to watch movies. When i connect the HDMI cable to the SONY TV it underscans the image and i have to readjust it to fit the TV. Similarly if i re-adjust the image and connect the HDMI cable back to my ASUS monitor it overscans the image (because that's how i had it on the TV) and i have to fit it again. This wasn't a problem with my HP HDX16t laptop (again using the same hardware)
    Any help??

    Hi,
    This issue happens most probably due to Corrupted Video Card Drivers.
    Right click on Desktop, click Screen Resolution, set the Screen Resolution Slider to Maximum, click Apply/Ok.
    Check if you are able to play Videos fine. If it does not work.
    1. Click Start, type: DEVMGMT.MSC in Search Field and Press Enter. It opens Device Maanger Window.
    2. Go to 'Display Adapters' category, and expand it. Right click on Display Driver entry, and click uninstall.
    3. Click Start->All Programs->Recovery Manager->Click Hardware Driver installation.
    Select Video Card Driver entry, and click Install.
    Restart the PC, and check of the issue has fixed.
    Thank You.
    Kiran Talluri
    Say thanks by clicking the "Kudos! Star" which is on the left.
    Make it easier for other people to find solutions, by marking my answer "Accept as Solution" if it solves your issue

  • IMac 24" Bootcamp scrambled video Problem in Windows Setup.

    I just got a new iMac 24" today and was wondering if anyone else's iMacs are exhibiting display problems in boot camp (see picture links below and description) while in the windows setup screen or other LOW RESOLUTION screen modes.
    http://disgruntleddesigner.com/imac.JPG
    http://disgruntleddesigner.com/imac2.JPG
    http://disgruntleddesigner.com/imac3.JPG
    In low resolutions screen modes used by windows setup and the windows boot screen, the display is completely scrambled with moving pixel artifacts such as black vertical lines and misplaced color pixels all over the place.
    The computer is a brand new 24" iMac 2.4 with all the latest OS updates. I called Apple's tech support and explained the situation and as soon as the tech rep heard the word bootcamp
    he essentially turned his ears off. While I understand Apple doesn't support bootcamp I'm pretty sure this is a hardware/firmware issue and NOT a bootcamp thing.. but they suggest I write here instead of bothering them... so here's my plea for help.

    Update.. I exchanged the computer for another at Best Buy and this one does NOT have this issue. I suspect it's a firmware or hardware thing after all.

Maybe you are looking for